Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal infrared”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Altitude and seasonal characteristics of aerosol backscatter at thermal infrared wavelengths using lidar observations from coastal California

A calibrated CO2 lidar has been used to measure boundary layer aerosol backscatter and vertical profiles of tropospheric and lower stratospheric aerosol backscatter over a 1984-1987 time period from a site in Pasadena, California. The lidar data have been taken at two wavelengths, 9.25 and 10.6 microns. Data are presented which show altitude, seasonal, and trend characteristics of backscatter for various air mass histories. Results of trajectory studies indicate the influence of convective activity and other factors on the backscatter profiles.

Menzies, Robert T.↗

Thermal infrared properties of Titan's stratospheric aerosol

The monotonic increase with wavenumber of stratospheric IR opacities in the north polar neighborhood of Titan, in the 250-600/cm bandpass, becomes more extreme with decreasing altitude, consistent with an opacity that is primarily dependent on a high altitude photochemical aerosol, on the one hand, but which is moderated by condensed organics at lower altitudes. Because condensates exhibit a wavenumber dependence for opacity which is the opposite of that required, it is suggested that condensed nitriles may be prominent; either of these condensates may be acceptable for sufficiently large particles. While comparisons with low-latitude data indicate no clear dependence of vertically-integrated opacity on latitude above 80 km, indications of a particle size and/or composition gradient with latitude in the lower stratosphere are noted.

Samuelson, Robert E.↗

Nighttime reactive nitrogen measurements from stratospheric infrared thermal emission observations

IR thermal emission spectra of the earth's atmosphere in the 700-2000/cm region were obtained with a cryogenically cooled high-resolution interferometer spectrometer on a balloon flight from Palestine, Texas, on September 15-16, 1986. The observations exhibit spectral features of a number of stratospheric constituents, including important species of the reactive nitrogen family. An analysis of the observed data for simultaneously measured vertical distributions of O3, H2O, N2O, NO2, N2O5, HNO3, and ClONO2 is presented. These measurements permit the first direct determination of the nighttime total reactive nitrogen concentrations, and the partitioning of the important elements of the NO(x) family. Comparisons of the total reactive nitrogen budget are made with the measurements by the ATMOS experiment and with the predictions of one-dimensional and two-dimensional photochemical models.

Abbas, Mian M.↗

Autonomous robot using infrared thermal camera to discriminate objects in outdoor scene

A complete autonomous legged robot is beig designed at Carnegie Mellon University to perform planetary exploration without human supervision. This robot must traverse unknown and geographically diverse areas in order to collect samples of materials. This paper describes how thermal imaging can be used to identify materials in order to find good footfall positions and collection sites of material. First, a model developed for determining the temperature of materials in an outdoor scene is presented. By applying this model, it is shown that it is possible to determine a physical characteristic of the material: thermal inertia. Second, experimental results are described that consist in recording thermal images of an outdoor scene constituted with sand and rock. Third, results and limitations of applying the model to experimental images are analyzed. Finally, the paper analyzes how basic segmentation algorithms can be combined with the thermal inertia segmentation in order to improve the discrimination of different kinds of materials.

Caillas, C.↗

Middle infrared thermal maps of Venus at the time of the Galileo encounter

Images of the disk of Venus, taken at wavelengths between 8 and 22 micrometers, were obtained a few days after the Galileo spacecraft's closest approach on February 8, 1990; these images show variations in the thickness of the main H2SO4 cloud deck and the overlying temperature structure. Several features are qualitatively similar to those of earlier observations, such as a hot region at the south pole, surrounded by a cold 'collar', and brightening toward the lower latitudes, where low-contrast banding appears. The collar does have a northern counterpart that is warmer, however. Equatorial limb darkening is quantitatively similar to that of previous observations; fairly constant at wavelengths up to 20 micrometers, where limb darkening increases substantially. In contrast to what was found in previous observations, polar and equatorial limb darkening are nearly the same at most wavelengths. A longitudinal variation is observable that is consistent with a wavenumber-2 behavior and a brightness maximum near local midnight.

Orton, Glenn S.↗

Thermal infrared observations of Mars (7.5-12.8 microns) during the 1990 opposition

Thirteen spectra of Mars, in the 7.5 to 12.8 micron wavelength were obtained on 7 Dec. 1990 from the Infrared Telescope Facility (IRTF). For these observations, a grating with an ultimate resolving power of 120 to 250 was used and wavelengths were calibrated for each grating setting by comparison with the absorption spectrum of polystyrene measured prior to each set of observations. By sampling the Nyquist limit at the shortest wavelengths, an effective resolving power of about 120 over the entire wavelength range was achieved. A total of four grating settings were required to cover the entire wavelength region. A typical observing sequence consisted of: (1) positioning the grating in one of the intervals; (2) calibrating the wavelength of positions; and (3) obtaining spectra for a number of spots on Mars. Several observations of the nearby stellar standard star, alpha Tauri, were also acquired throughout the night. Each Mars spectrum represents an average of 4 to 6 measurements of the individual Mars spots. As a result of this observing sequence, the viewing geometry for a given location or spot on Mars does not change, but the actual location of the spot on Mars's surface varies somewhat between the different grating settings. Other aspects of the study are presented.

Roush, T. L.↗

New dust opacity mapping from Viking Infrared Thermal Mapper data

Global dust opacity mapping for Mars has been carried forward using the approach described by Martin (1986) for Viking IR Thermal Mapper data. New maps are presented for the period from the beginning of Viking observations, until Ls 210 deg in 1979 (1.36 Mars years). This range includes the second and more extensive planet-encircling dust storm observed by Viking, known as storm 1977b. Improvements in approach result in greater time resolution and smaller noise than in the earlier work. A strong local storm event filled the Hellas basin at Ls 170 deg, prior to the 1977a storm. Dust is retained in equatorial regions following the 1977b storm far longer than in mid-latitudes. Minor dust events appear to raise the opacity in northern high latitudes during northern spring. Additional mapping with high time resolution has been done for the periods of time near the major storm origins in order to search for clues to the mechanism of storm initiation. The first evidence of the start of the 1977b storm is pushed back to Ls 274.2 deg, preceding signs of the storm in images by about 15 hours.

Martin, Terry Z.↗

Preliminary analysis of thermal-infrared multispectral scanner data of the Iron Hill, Colorado carbonatite-alkalic rock complex

The Iron Hill carbonatite-alkalic igneous rock complex is in the Powderhorn mining district, approximately 40 km south-southwest of Gunnison, Colorado. The complex, which occupies about 30 sq km, was emplaced in metasedimentay and metavolcanic rocks during the later Precambrian or early Cambrian. The main rock types in the complex, from oldest to youngest, are fenite, pyroxenite, uncompahgrite, ijolite, nepheline syenite, and dolomitic carbonatite. The carbonatite is limonitic and forms an elliptially shaped 4 sq km stock. Calcitic and dolomitic carbonatite dikes are also numerous throughout the complex and in the pre-existing rocks. Pyroxenite is the most widespread rock type within the complex, but pyroxene is extensively altered to biotite, phlogopite, and vermiculite. Fenite, which formed through Na, K-metasomatism of the country rocks, typically contains more feldspar and less quartz than the equivalent unaltered country rocks. The other alkalic rock types are less widespread and less well exposed. Parts of the complex are covered by Oligocene ash-flow tuff and alluvial, colluvial, and glacial deposits. Sagebrush and grass cover is moderately dense to very dense at low to intermediate elevations; coniferous tree cover is dense at high elevations and on some north-facing slopes at lower elevations. A new algorithm was used to compute spectral emissivity ratios, independent of any emissivity assumptions. This algorithm has the advantage that any of the possible emissivity ratios can be computed and, thus, a large variety of composite ratio images can be constructed, which permits examination of various geologic hypotheses based on the spectral properties of the surface materials.

Rowan, Lawrence C.↗

Directional emittance corrections for thermal infrared imaging

A simple measurement technique for measuring the variation of directional emittance of surfaces at various temperatures using commercially available radiometric IR imaging systems was developed and tested. This technique provided the integrated value of directional emittance over the spectral bandwidth of the IR imaging system. The directional emittance of flat black lacquer and red stycast, an epoxy resin, measured using this technique were in good agreement with the predictions of the electromagnetic theory. The data were also in good agreement with directional emittance data inferred from directional reflectance measurements made on a spectrophotometer.

Daryabeigi, Kamran↗

Thermal infrared imaging of subarcsecond structure in the trapezium nebula

We present 11.7 and 8.8 micron images of the central region of the Ney-Allen Nebula In Orion which reveal mid-infrared counterparts to the ionized globules previously discovered by optical and radio observations. The 0.5 arcsec full width at half maximum (FWHM) resolution images also reveal several arc-shaped structures which are associated with the compact sources. Each of the arcs points toward theta(sup 1) Ori C, providing further evidence for the strong-effects of the intense radiation and wind from this star on the central Orion Nebula. Low-resolution spectra of a few of these condensations and arcs are similar to spectra of the diffuse, optically thin silicate dust observed throughout the region. Photometry of one of the condensations, however, indicates that is cooler than the others. Simple momentum-balance arguments indicate that dust in the arcs could originate in the outflow from the compact sources and flow outward until stopped by the stellar wind and radiation pressure from theta(sup 1) Ori C.

Hayward, T. L.↗

Measurements of thermal infrared spectral reflectance of frost, snow, and ice

Because much of Earth's surface is covered by frost, snow, and ice, the spectral emissivities of these materials are a significant input to radiation balance calculations in global atmospheric circulation and climate change models. Until now, however, spectral emissivities of frost and snow have been calculated from the optical constants of ice. We have measured directional hemispherical reflectance spectra of frost, snow, and ice from which emissivities can be predicted using Kirchhoff's law (e = 1-R). These measured spectra show that contrary to conclusions about the emissivity of snow drawn from previously calculated spectra, snow emissivity departs significantly from blackbody behavior in the 8-14 micrometer region of the spectrum; snow emissivity decreases with both increasing particle size and increasing density due to packing or grain welding; while snow emissivity increases due to the presence of meltwater.

Salisbury, John W.↗

Far-infrared thermal emission from the inner cooling flow region of NGC 1275

Measurements of the spatial distribution of 100 micrometers emission are presented for NGC 1275, the central galaxy in the Perseus cluster. The emission is clearly resolved on a kiloparsec level, and has the same flux density as seen by IRAS at an epoch when the nonthermal emission was a factor of 10 higher. This emission which traces the greater part of the luminosity of this galaxy, is thus identified as thermal emission from dust. The emission appears to be distributed more nearly like the low-velocity H-alpha filaments in the core of this galaxy than the starlight, extended nonthermal radio, X-ray emission, or high velocity gas. While the dust might be heated by a star-formation region that is fed by the cooling flow in this cluster, the intracluster gas also appears to be energetically capable of this as well, in which case the dust would be, at least at the present time, the dominant cooling mechanism for the hot gas. The large quantity of dust in NGC 1275 is unlikely to have been created within the galaxy, or in the cooling flow, but was probably accreted from a recent galactic interloper.

Lester, D. F.↗

Thermal infrared spectra of the Moon

Contrary to recent assertions in the literature, lunar emission spectra obtained at an altitude of 32 km with a balloon-borne telescope are virtually undistorted by atmospheric absorption, except in the ozone region. These spectra have been found to correlate closely with laboratory emission spectra of returned lunar samples measured in a simulated lunar environment. Thus, lunar spectra obtained with the balloon-borne telescope system are the standards against which groundbased spectral measurements of the Moon should be compared. Comparison of balloon-borne measurements with recent groundbased spectral measurements suggests that the latter suffer from some source of systematic error. When high-quality lunar spectra are available, they will be best interpreted by comparison with returned lunar samples, rather than terrestrial minerals or rocks, because of subtle spectral differences between lunar and terrestrial minerals perhaps associated with incipient alteration of the latter.

Salisbury, John W.↗

Thermal infrared spectroscopic observations of Mars from the Kuiper Airborne Observatory (KAO): Constraints on past climates and weathering products

Spectral observations providing evidence for the presence of volatile-bearing minerals on the surface of Mars were obtained in 1988 and 1990 from the KAO. The 1988 data suggest the presence of 1-3 weight percent (wt%) of carbonate/bicarbonate and 10-15 wt% sulfate/bisulfate associated with martian atmospheric dust. Estimates of the optical depths are approximately 0.60 and approximately 0.35 in 1988 and 1990, respectively.

Roush, Ted L.↗

Spectroscopic data for thermal infrared remote sensing

There has been extensive world-wide use of chloro-fluoro-carbons (CFC's), especially CFC-11 (CFCl3) and CFC-12 (CF2Cl2), hydro-chloro-fluoro-carbons (HCFC's), HCFC-22 (CHFCl2) in particular, and sulphur hexaflouride (SF6) in numerous many industrial applications. These chemicals possess either a strong ozone-depletion potential or a global-warming potential, or both, and pose a threat to the inhabitability of our planet. Recognition of this fact has led to significant curtailment, if not total banishment, of their use globally. However, as recent satellite observations have shown, decline in their atmospheric concentrations may not be immediate. The marked depletion of ozone which has been observed in recent years at high latitudes has made infrared remote sensing of the atmosphere an activity of high priority. The success of any infrared remote sensing experiment conducted in the atmosphere depends upon the availability of accurate, high-resolution, spectroscopic data that are applicable to that experiment. This paper presents a preliminary phase of a multi-faceted work using a Fourier-transform spectrometer (FTS) which is in progress in our laboratory. The concept of how laboratory-borne measurements can be geared toward obtaining a database that is directly applicable to satellite-borne remote sensing missions is the main thrust of this paper which addresses itself to ongoing or planned international space missions. Spectroscopic data on the unresolvable bands of the above mentioned as well as several other man-made gases and on the individual spectral lines of such naturally present trace gases as CO2, N2O, NH3, and CH4 are presented. There is often significant overlap between the isolated lines of better known bands of the more abundant species and the weaker absorption features identifiable as bands of the currently less abundant CFC's, HCFC's, and SF6.

Varanasi, P.↗

Constraints on Circumstellar Dust Grain Sizes from High Spatial Resolution Observations in the Thermal Infrared

We describe how high spatial resolution imaging of circumstellar dust at a wavelength of about 10 micron, combined with knowledge of the source spectral energy distribution, can yield useful information about the sizes of the individual dust grains responsible for the infrared emission. Much can be learned even when only upper limits to source size are available. In parallel with high-resolution single-telescope imaging that may resolve the more extended mid-infrared sources, we plan to apply these less direct techniques to interpretation of future observations from two-element optical interferometers, where quite general arguments may be made despite only crude imaging capability. Results to date indicate a tendency for circumstellar grain sizes to be rather large compared to the Mathis-Rumpl-Nordsieck size distribution traditionally thought to characterize dust in the general interstellar medium. This may mean that processing of grains after their initial formation and ejection from circumstellar atmospheres adjusts their size distribution to the ISM curve; further mid-infrared observations of grains in various environments would help to confirm this conjecture.

Bloemhof, E. E.↗

Long-Slit Spectra of Mars in the Thermal Infrared

We have obtained long-slit spectra of Mars in the 7-14 micrometer regime. Our two integrations, taken 1993 March 2, are spaced about 2 hours apart and are centered at longitudes of roughly 210 and 240 degrees. The data cover the Elysium Planitia and volcanic regions, the classical dark albedo regions of Cerburus and central and eastern Hesperia, and the classical bright albedo region Utopia Planitia. We have deconvolved the point spread function from the images using a maximum entropy reconstruction algorithm; the resulting spatial resolution of the images is better than 1". Mars occupies approximately 9" of the slit, and we have detected variations in the spectral emission from different areas of the planet. We are in the process of interpreting these spectral variations in terms of the temperature and composition of the surface and the transmission of the Martian atmospheric dust and gases.

Rowland, C. M.↗

Prospecting Jupiter in the Thermal Infrared: Temperatures and Dynamics

We present for the first time detailed maps of charged temperatures and winds in Jupiter's stratosphere, from infrared spectra acquired during the Cassini swingby of Jupiter. The maps reveal a high-altitude equatorial jet 1140 m s-', as strong as the cloud-top winds. It may result from wave forcing and be analogous to the quasi-biennial oscillation in the earth's stratosphere. The maps give the best characterization of the motions of stratospheric waves, and they better define the vertical penetration of the auroral hot spots into the stratosphere.

Flasar, F. M.↗