Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temporal reasoning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Overcoming persistent challenges in putting environmental flow policy into practice: a systematic review and bibliometric analysis

The implementation of environmental flows (e-flows) aims to reduce the negative impacts of hydrological alteration on freshwater ecosystems. Despite the growing attention to the importance of e-flows since the 1970s, actual implementation has lagged. Therefore, we explore the limitations in e-flows implementation, their systemic reasons, and solutions. We conducted a systematic review and a bibliometric analysis to identify peer-reviewed articles published on the topic of e-flows implementation research in the last two decades, resulting in 68 research and review papers. Co-occurrence of terms, and geographic and temporal trends were analyzed to identify the gaps in environmental water management and propose recommendations to address limitations on e-flows implementation. We identify the underlying causes and potential solutions to such challenges in environmental water management. The limitations to e-flow implementation identified were categorized into 21 classes. The most recognized limitation was the competing priorities of human uses of water (n = 29). Many secondary limitations, generally co-occurring in co-causation, were identified as limiting factors, especially for implementing more nuanced and sophisticated e-flows. The lack of adequate hydrological data (n = 24) and ecological data (n = 28) were among the most mentioned, and ultimately lead to difficulties in starting or continuing monitoring/adaptive management (n = 28) efforts. The lack of resource/capacity (n = 21), experimentation (n = 19), regulatory enforcement (n = 17), and differing authorities involved (n = 18) were also recurrent problems, driven by the deficiencies in the relative importance given to e-flows when facing other human priorities. In order to provide a clearer path for successful e-flow implementation, system mapping can be used as a starting point and general-purpose resource for understanding the sociohydrological problems, interactions, and inherited complexity of river systems. Secondly, we recommend a system analysis approach to address competing demands, especially with the use of coupled water-energy modeling tools to support decision-making when hydropower generation is involved. Such approaches can better assess the complex interactions among the hydrologic, ecological, socioeconomic, and engineering dimensions of water resource systems and their effective management. Lastly, given the complexities in environmental water allocation, implementation requires both scientific rigor and proven utility. Consequently, and where possible, we recommend a move from simplistic flow allocations to a more holistic approach informed by hydroecological principles. To ease conflicts between competing water demands, water managers can realize more 'pop per drop' by supporting key components of a flow regime that include functional attributes and processes that enhance biogeochemical cycling, structural habitat formation, and ecosystem maintenance.

54 ENVIRONMENTAL SCIENCES↗

Convective Transition Statistics over Tropical Oceans for Climate Model Diagnostics: Observational Baseline

Convective transition statistics, which describe the relation between column-integrated water vapor (CWV) and precipitation, are compiled over tropical oceans using satellite and ARM site measurements to quantify the temperature and resolution dependence of the precipitation–CWV relation at fast time scales relevant to convection. At these time scales, and for precipitation especially, uncertainties associated with observational systems must be addressed by examining features with a variety of instrumentation and identifying robust behaviors versus instrument sensitivity at high rain rates. Here the sharp pickup in precipitation as CWV exceeds a certain critical threshold is found to be insensitive to spatial resolution, with convective onset occurring at higher CWV but at lower column relative humidity as bulk tropospheric temperature increases. Mean tropospheric temperature profiles conditioned on precipitation show vertically coherent structure across a wide range of temperature, reaffirming the use of a bulk temperature measure in defining the convective transition statistics. The joint probability distribution of CWV and precipitation develops a peak probability at low precipitation for CWV above critical, with rapidly decreasing probability of high precipitation below and near critical, and exhibits systematic changes under spatial averaging. The precipitation pickup with CWV is reasonably insensitive to time averaging up to several hours but is smoothed at daily time scales. This work demonstrates that CWV relative to critical serves as an effective predictor of precipitation with only minor geographic variations in the tropics, quantifies precipitation-related statistics subject to different spatial–temporal resolution, and provides a baseline for model comparison to apply these statistics as observational constraints on precipitation processes.

54 ENVIRONMENTAL SCIENCES↗

Modeling Macro- and Micro-Scale Turbulent Mixing and Chemistry in Engine Exhaust Plumes

Simulation of turbulent mixing and chemical processes in the near-field plume and plume-vortex regimes has been successfully carried out recently using a reduced gas phase kinetics mechanism which substantially decreased the computational cost. A detailed mechanism including gas phase HOx, NOx, and SOx chemistry between the aircraft exhaust and the ambient air in near-field aircraft plumes is compiled. A reduced mechanism capturing the major chemical pathways is developed. Predictions by the reduced mechanism are found to be in good agreement with those by the detailed mechanism. With the reduced chemistry, the computer CPU time is saved by a factor of more than 3.5 for the near-field plume modeling. Distributions of major chemical species are obtained and analyzed. The computed sensitivities of major species with respect to reaction step are deduced for identification of the dominant gas phase kinetic reaction pathways in the jet plume. Both the near field plume and the plume-vortex regimes were investigated using advanced mixing models. In the near field, a stand-alone mixing model was used to investigate the impact of turbulent mixing on the micro- and macro-scale mixing processes using a reduced reaction kinetics model. The plume-vortex regime was simulated using a large-eddy simulation model. Vortex plume behind Boeing 737 and 747 aircraft was simulated along with relevant kinetics. Many features of the computed flow field show reasonable agreement with data. The entrainment of the engine plumes into the wing tip vortices and also the partial detrainment of the plume were numerically captured. The impact of fluid mechanics on the chemical processes was also studied. Results show that there are significant differences between spatial and temporal simulations especially in the predicted SO3 concentrations. This has important implications for the prediction of sulfuric acid aerosols in the wake and may partly explain the discrepancy between past numerical studies (that employed parabolic or temporal approximations) and the measured data. Finally to address the major uncertainty in the near-field plume modeling related to the plume processing of sulfur compounds and advanced model was developed to evaluate its impact on the chemical processes in the near wake. A comprehensive aerosol model is developed and it is coupled with chemical kinetics and the axisymmetric turbulent jet flow models. The integrated model is used to simulate microphysical processes in the near-field jet plume, including sulfuric acid and water binary homogeneous nucleation, coagulation, non-equilibrium heteromolecular condensation, and sulfur-induced soot activation. The formation and evolution of aerosols are computed and analyzed. The computed results show that a large number of ultra-fine (0.3--0.6 nm in radius) volatile HSO4 - HO embryos are generated in the near-field plume. These embryos further grow in size by self coagulation and condensation. Soot particles can be activated by both heterogeneous nucleation and scavenging of H2SO4-H2O aerosols. These activated soot particles can serve as water condensation nuclei for contrail formation. Conditions under which ice contrails can form behind aircrafts are studied. The sensitivities of the threshold temperature for contrail formation with respect to aircraft propulsion efficiency, relative humidity, and ambient pressure are evaluated. The computed aerosol properties for different extent of fuel sulfur conversion to S(VI) (SO3 and H2SO4) in engine are examined and the results are found to be sensitive to this conversion fraction.

Menon, Suresh↗

Desert Dust Satellite Retrieval Intercomparison

This work provides a comparison of satellite retrievals of Saharan desert dust aerosol optical depth (AOD) during a strong dust event through March 2006. In this event, a large dust plume was transported over desert, vegetated, and ocean surfaces. The aim is to identify and understand the differences between current algorithms, and hence improve future retrieval algorithms. The satellite instruments considered are AATSR, AIRS, MERIS, MISR, MODIS, OMI, POLDER, and SEVIRI. An interesting aspect is that the different algorithms make use of different instrument characteristics to obtain retrievals over bright surfaces. These include multi-angle approaches (MISR, AATSR), polarisation measurements (POLDER), single-view approaches using solar wavelengths (OMI, MODIS), and the thermal infrared spectral region (SEVIRI, AIRS). Differences between instruments, together with the comparison of different retrieval algorithms applied to measurements from the same instrument, provide a unique insight into the performance and characteristics of the various techniques employed. As well as the intercomparison between different satellite products, the AODs have also been compared to co-located AERONET data. Despite the fact that the agreement between satellite and AERONET AODs is reasonably good for all of the datasets, there are significant differences between them when compared to each other, especially over land. These differences are partially due to differences in the algorithms, such as as20 sumptions about aerosol model and surface properties. However, in this comparison of spatially and temporally averaged data, at least as significant as these differences are sampling issues related to the actual footprint of each instrument on the heterogeneous aerosol field, cloud identification and the quality control flags of each dataset.

Carboni, E.↗

WMLES of Boundary-Layer Transition

An analysis of the potential for the accurate prediction of laminar-turbulent transition by Wall-Modeled Large-Eddy Simulation (WMLES) indicates that satisfactory prediction of transition by WMLES is possible, provided a) a sufficiently accurate wall model for the initial stage of transition is employed, b) a satisfactory transition is made between this initial-stage wall model and the wall model for the downstream fully-developed turbulence, and c) limitations on temporal and spatial resolution, and on the thickness of the wall-modeled region, imposed by the need to accurately resolve the disturbance waves and the transition region are observed. This is illustrated with WMLES computations of subharmonic transition in a flat-plate boundary layer that yield reasonable agreement with DNS results. However, the wall-modeled region thickness, and thus the cost savings, is less than is typical for WMLES of fully developed turbulence.

wall-modeled large-eddy simulation↗

WMLES of Boundary-Layer Transition

An analysis of the potential for the accurate prediction of laminar-turbulent transition by Wall-Modeled Large-Eddy Simulation (WMLES) indicates that satisfactory prediction of transition by WMLES is possible, provided a) a sufficiently accurate wall model for the initial stage of transition is employed, b) a satisfactory transition is made between this initial-stage wall model and the wall model for the downstream fully-developed turbulence, and c) limitations on temporal and spatial resolution, and on the thickness of the wall-modeled region, imposed by the need to accurately resolve the disturbance waves and the transition region are observed. This is illustrated with WMLES computations of subharmonic transition in a flat-plate boundary layer that yield reasonable agreement with DNS results. However, the wall-modeled region thickness, and thus the cost savings, is less than is typical for WMLES of fully developed turbulence.

Wall-modeled large-eddy simulation↗

Assessment of tissue or lesion depth using temporally resolved light scattering spectroscopy

A method is described to enhance the ability to evaluate the depth of a tissue component or a lesion having optical properties different from a surrounding tissue using time resolved optical methods. This invention may be particularly suitable for the evaluation of lesion depth during RF ablation (irreversible tissue modification/damage) using specially designed devises (catheters) that deliver heat in a localized region for therapeutic reasons. The technique allows for increased ability to evaluate the depth of the ablated lesion or detect the presence of other processes such as micro-bubble formation and coagulation with higher sensitivity compared to that offered by steady state spectroscopy. The method can be used for in-vivo, real-time monitoring during tissue ablation or other procedures where information on the depth of a lesion or tissue is needed. Exemplary uses are found in tissue ablation, tissue thermal damage, lesion and tissue depth assessment in medical applications.

59 BASIC BIOLOGICAL SCIENCES↗

Regional Subsidence Analysis Through a Multi-Scale Modeling Framework Based on Breakage Mechanics

Although poroelastic models are often used to explain the delay between subsurface fluid depletion and ground subsidence, inelastic compaction involving permanent changes of rock microstructure may exacerbate hydro-mechanical coupling, thus influencing the interpretation of measurements and long-term forecasts. Here, a multi-scale modeling approach is discussed, which accounts for the inherent connection between rock microstructure, hydraulic conductivity, and pore compaction. A constitutive model built within the framework of breakage mechanics is proposed to link the hydraulic conductivity of granular rocks with inelastic deformations and changes in grading caused by injection-depletion cycles at stress levels far from yielding. The proposed model has been incorporated into large-scale simulation frameworks, thus enabling the spatiotemporal mapping of regional subsidence through a hybrid, semi-analytical approach. Numerical results based on this strategy show that the model allows isolating near-field and far-field effects into the computation of land subsidence and can generate forecasts for different modeling scenarios (e.g., elastic and inelastic compaction, constant permeability, and concurrent change of compressibility and permeability). In particular, examples of simulations for the case of the Groningen gas field are discussed, showing the model capabilities to use both field measurements and laboratory tests for the generation of reasonable subsidence maps, without expensive computational costs. Results indicate that ignoring coupled inelastic effects has major consequences on the predicted timescale of subsidence. Specifically, while all the model scenarios produced similar long-term ground settlements, those ignoring breakage-dependent permeability changes result in a variation of the temporal window of residual subsidence of the order of several decades.

58 GEOSCIENCES↗

Nonlinear force-free field modeling of the solar magnetic carpet and comparison with SDO/HMI and Sunrise/IMAX observations

In the quiet solar photosphere, the mixed polarity fields form a magnetic carpet that continuously evolves due to dynamical interaction between the convective motions and magnetic field. This interplay is a viable source to heat the solar atmosphere. In this work, we used the line-of-sight (LOS) magnetograms obtained from the Helioseismic and Magnetic Imager on the Solar Dynamics Observatory, and the Imaging Magnetograph eXperiment instrument on the Sunrise balloon-borne observatory, as time-dependent lower boundary conditions, to study the evolution of the coronal magnetic field. We use a magneto-frictional relaxation method, including hyperdiffusion, to produce a time series of three-dimensional nonlinear force-free fields from a sequence of photospheric LOS magnetograms. Vertical flows are added up to a height of 0.7 Mm in the modeling to simulate the non-force-freeness at the photosphere-chromosphere layers. Among the derived quantities, we study the spatial and temporal variations of the energy dissipation rate and energy flux. Our results show that the energy deposited in the solar atmosphere is concentrated within 2 Mm of the photosphere and there is not sufficient energy flux at the base of the corona to cover radiative and conductive losses. Possible reasons and implications are discussed. Better observational constraints of the magnetic field in the chromosphere are crucial to understand the role of the magnetic carpet in coronal heating.

79 ASTRONOMY AND ASTROPHYSICS↗

A new global ionospheric model

A new global ionospheric model has been successfully implemented. The daytime portion of this model provides one-way ionospheric range corrections that compare favorably with those derived from the Mariner Venus Mercury (MVM'73) S- and X-band dual frequency doppler data. For elevation angles, γ, higher than 30 deg and solar zenith angle, X, less than 80 deg, this model provides calibrations accurate to a few centimeters. The calibrations provided by the nighttime model are also very reasonable. These, however, will have to be compared with the S/X data from Viking ‘75 for final confirmation. It is interesting to note that the daytime ionospheric calibrations derived from the current calibration scheme, DIEN/TIEN, are fairly close to those given by the new global model, especially in the temporal variations and thus the doppler effects. In the daytime and for γ ≳ 30 deg and X < 80 deg, the calibrations from the two models agree almost exactly. However, for situations when γ is below 30 deg and X is larger than 80 deg simultaneously, as much as 12% (~70 cm, typically) improvement of the new model over DIEN/TIEN results. The comparison between the nighttime model and DIEN/TIEN has been based on the one-way ionospheric range corrections for three passes near the Mariner 9 encounter with Mars in 1971 tracked at Goldstone. It is found that they can differ by over 30% (typically 20 cm). As mentioned, the confirmation of these nighttime calibrations awaits the availability of the Viking S/X dual frequency doppler data. Finally, the ionospheric calibration effects on orbit determination provided by DIEN/TIEN, the global model, and the S/X data will be intercompared during the Viking Mission.

K. W. Yip↗

Direct simulation of compressible wall-bounded turbulence

When analyzing many turbulent flows, the effects of compressibility can be neglected. Even some relatively high-speed flows, such as boundary layers generated by a supersonic aircraft, produce turbulent statistics that are similar to those found for the incompressible case. There are other situations, however, in which the non-zero divergence of the turbulence leads to behavior that is fundamentally different from that found at constant density. Examples include flows created by internal combustion engines, hypersonic flight, and supersonic combustion. It is with instances such as these that this project is concerned. In particular, we are interested in the effects of compressibility on turbulence near a smooth solid constant temperature surface; our primary objective is an increased physical understanding that can be used to improve turbulence models of wall-bounded compressible flows. With this in mind, we have begun a direct numerical simulation (DNS) study of turbulence in a plane channel. Because all of the relevant spatial and temporal scales are to be resolved, the simulations require no subgrid scale parameterization. The DNS code developed by Buell to study compressible plane Couette flow was modified to solve the compressible Navier-Stokes equations in the plane channel. The channel was chosen over the Couette flow for two reasons: (1) to avoid using the very large streamwise domains needed to adequately capture the large Couette vortical structures; and (2) to make use of previous experience by considering the compressible version of a well established case and isolate finite Mach number effects by comparing to the incompressible channel.

Coleman, Gary N.↗

Guest Investigator Studies with the Compton Gamma Ray Observatory

The cumulative all-sky survey by the Compton Gamma Ray Observatory (CGRO), composed of data acquired during the first three years of the mission, included a number of regions of very limited exposure. The most glaring deficiency in coverage was toward the region of the South Galactic Pole (SGP), which received significantly less exposure than other directions- by a factor of at least 2 to 3. Furthermore, nearly all of the SGP exposure was accumulated during the first year of the mission. Since blazars are known to be time-variable, and of unknown duty cycle, a pointing of the CCRO in that direction was considered highly desirable, and long overdue. In addition, data gathered from a pointing toward the SGP and its comparison with comprehensive data available for the North Galactic Pole would be extremely valuable to investigators studying the extragalactic diffuse emission. The reasons outlined above prompted our initiation of a Cycle 4 campaign to systematically search with EGRET and COMPTEL for gamma-ray emission from sources near the South Galactic Pole. The Cycle 4 SGP campaign consisted of tnvo 14-day observations separated in in time by approximately 10 months. The temporal separation of the observations was requested to allow a test for possible variations in the detected sources. Our primary targets were 38 FSRQs which lie within 30 degrees of the SGP, and which satisfy the basic criteria for candidate gamma-ray AGNs,flat-spectrum radio sources, many of which exhibit blazar-type properties). These targets were selected from the standard references, and from the available on-line databases (e.g., the NASA Extragalactic Database, NED), as the most promising AGN targets in the vicinity of the SGP. A 30 radius from the SGP was chosen as the boundary of our survey, since the selected targets would then fall within the most sensitive portion of the fields of view of EGRET and COMPTEL (i.e., within a 30 zenith angle), for a CGRO pointing directed exactly at the SGP. Our South Galactic Pole Survey yielded a number of exciting results. The EGRET data were analyzed using the maximum likelihood techniques to estimate the intensity, spectrum, and position of gamma-ray sources in the field of view. Our analysis revealed four sources at energies greater than 100 MeV with likelihood ratios corresponding to greater than 30 detections (Vestrand et al. 1996). One of the sources is associated with the well known gamma-ray blazar PKS 0208-512, but the other three were previously unknown. Among the new detections was PKS 2155-304 which is often considered a prototype of the x-ray selected BL Lacs. PKS 2155-304, which was also detected at hard x-ray energies by CGRO/OSSE, is one of the brightest BL Lac objects in the sky at optical through x-ray energies and has a history of rapid, strong multiwavelength variability. As such, it has been the subject of intensive, contemporaneous, multiwavelength monitoring covering radio frequencies to x-ray energies.

Vestrand, W. T.↗

A Regional-Scale Assessment of Satellite Derived Precipitable Water Vapor Across The Amazon Basin

Atmospheric water vapor is widely recognized as a key climate variable, linking an assortment of poorly understood and complex processes. It is a major element of the hydrological cycle and provides a mechanism for energy exchange among many of the Earth system components. Reducing uncertainty in our current knowledge of water vapor and its role in the climate system requires accurate measurement, improved modeling techniques, and long-term prediction. Satellites have the potential to satisfy these criteria, as well as provide high resolution measurements that are not available from conventional sources. The focus of this paper is to examine the temporal and mesoscale variations of satellite derived precipitable water vapor (PW) across the Amazon Basin. This region is pivotal in the functioning of the global climate system through its abundant release of latent heat associated with heavy precipitation events. In addition, anthropogenic deforestation and biomass burning activities in recent decades are altering the conditions of the atmosphere, especially in the planetary boundary layer. A physical split-window (PSW) algorithm estimates PW using images from the GOES satellites along with the NCEP/NCAR Reanalysis data that provides the first guess information. Retrievals are made at a three-hourly time step during daylight hours in the Amazon Basin and surrounding areas for the months of June and October in 1988 (dry year) and 1995 (wet year). Spatially continuous fields are generated 5 times daily at 12Z, 15Z, 18Z, 21Z, and 00Z. These fields are then averaged to create monthly and 3 hourly monthly grids. Overall, the PSW estimates PW reasonable well in the Amazon with MAE ranging from 3.0 - 9.0 mm and MAE/observed mean around 20% in comparison to radiosonde observations. The distribution of PW generally mimics that of precipitation. Maximum values (42 - 52 mm) are located in the Northwest whereas minimum values (18 - 27 mm) are found along Brazil's East coast. Aside from the East coast, PW has a stronger north-south gradient than that of rainfall. As for the temporal variation of PW, June (1988 and 1995) experiences a peak about 1400 local time, corresponding to a maximum in air temperature. In contrast, October (1988 and 1995) experiences a maximum early in the day, 1100 local time, with a gradual decrease toward nighttime.

DeLiberty, Tracy↗

Multiscale investigation of thermomechanical and compositional developments in Ni alloy 718 under laser processing

Laser processing has been widely employed in various applications due to its exceptional spatial resolution. However, the rapid temperature gradients generated in localized areas present significant challenges for experimental characterization using conventional instruments. To characterize Ni alloy 718 during laser processing, we employed in-situ synchrotron X-ray diffraction with a high-speed detector, a method particularly well-suited for probing processes with high temporal and spatial resolution. Through a series of in-situ experiments, we investigated the local variations in the evolution of microstructures and thermomechanical behaviors within a keyhole mode melt pool. The in situ macroscopic thermomechanical behaviors were quantified using an empirical model derived from diffraction patterns, with experimental results showing reasonable agreement with finite element analysis. Various laser parameters were tested to assess their influences on the residual strains in the melt pools. The results revealed that the residual strain in the keyhole mode melt pool is relatively insensitive to variations in the parameters and is smaller than that in the melt pool created under conduction mode laser scanning. Additionally, we analyzed the shapes of individual diffraction spots, providing insights into the plastic behaviors and compositional developments in the resolidified alloy. The analysis confirmed that compositional variations in a dendritic microstructure manifest as asymmetric broadening of the diffraction spots.

Ni alloy 718↗

Distinctive Signals in 1-min Observations of Overshooting Tops and Lightning Activity in a Severe Supercell Thunderstorm

This work examines a severe weather event that took place over central Argentina on December 11, 2018. The evolution of the storm from its initiation, rapid organization into a supercell, and eventual decay was analyzed with high-temporal resolution observations. This work provides insight into the spatio-temporal co-evolution of storm kinematics (updraft area and lifespan), cloud-top cooling rates, and lightning production that led to severe weather. The analyzed storm presented two convective periods with associated severe weather. An overall decrease in cloud-top local minima IR brightness temperature (MinIR10.3), increase in overshooting top area, and lightning jump (LJ) preceded both periods. LJs provided the highest lead time to the occurrence of severe weather, with the ground-based lightning networks providing the maximum warning time of around 30 min. Lightning flash counts from the Geostationary Lightning Mapper (GLM) were underestimated when compared to detections from ground-based lightning networks. Among the possible reasons for GLM’s lower detection efficiency were an optically dense medium located above lightning sources and the occurrence of flashes smaller than GLM’s footprint. The minimum MinIR provided the shorter warning time to severe weather occurrence. However, secondary minima in MinIR10.3 that preceded the absolute minima improved this warning time by more than 10 min. Furthermore, trends in MinIR10.3 for time scales shorter than 6 min revealed shorter cycles of fast cooling and warming, which provided information about the lifecycle of updrafts within the storm. The advantages of using observations with high-temporal resolution to analyze the evolution and intensity of convective storms are discussed.

54 ENVIRONMENTAL SCIENCES↗

Spatial and Temporal Variability of Trace Gas Columns Derived from WRF/Chem Regional Model Output: Planning for Geostationary Observations of Atmospheric Composition

We quantify both the spatial and temporal variability of column integrated O3, NO2, CO, SO2, and HCHO over the Baltimore / Washington, DC area using output from the Weather Research and Forecasting model with on-line chemistry (WRF/Chem) for the entire month of July 2011, coinciding with the first deployment of the NASA Earth Venture program mission Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ). Using structure function analyses, we find that the model reproduces the spatial variability observed during the campaign reasonably well, especially for O3. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument will be the first NASA mission to make atmospheric composition observations from geostationary orbit and partially fulfills the goals of the Geostationary Coastal and Air Pollution Events (GEO-CAPE) mission. We relate the simulated variability to the precision requirements defined by the science traceability matrices of these space-borne missions. Results for O3 from 0- 2 km altitude indicate that the TEMPO instrument would be able to observe O3 air quality events over the Mid-Atlantic area, even on days when the violations of the air quality standard are not widespread. The results further indicated that horizontal gradients in CO from 0-2 km would be observable over moderate distances (≥ 20 km). The spatial and temporal results for tropospheric column NO2 indicate that TEMPO would be able to observe not only the large urban plumes at times of peak production, but also the weaker gradients between rush hours. This suggests that the proposed spatial and temporal resolutions for these satellites as well as their prospective precision requirements are sufficient to answer the science questions they are tasked to address.

TEMPO↗

Status and perspectives of municipal solid waste incineration in China: A comparison with developed regions

Highlights: • Questions about the applicability, technical status, and future of MSW incineration in China are answered. • Comparison involves China, EU, U.S., Japan, South Korea, and Taiwan area. • MSW incineration is not out of date around the world. • The structure of MSW incineration technologies is changing in China. • Perspectives and suggestions are given for the compliance with the emission standard. - Abstract: With the rapid expansion of municipal solid waste (MSW) incineration, the applicability, technical status, and future improvement of MSW incineration attract much attention in China. This paper aims to be a sensible response, with the aid of a comparison between China and some representative developed regions including the EU, the U.S., Japan, South Korea, and Taiwan area. A large number of up-to-date data and information are collected to quantitatively and impartially support the comparison, which covers a wider range of key points including spatial distribution, temporal evolution, technologies, emissions, and perspectives. Analysis results show that MSW incineration is not an outdated choice; however, policy making should prevent the potentially insufficient utilization of MSW incinerators. The structure of MSW incineration technologies is changing in China. The ratio of plants using fluidized bed is decreasing due to various realistic reasons. Decision-makers would select suitable combustion technologies by comprehensive assessments, rather than just by costs. Air pollution control systems are improved with the implementation of China’s new emission standard. However, MSW incineration in China is currently blamed for substandard emissions. The reasons include the particular elemental compositions of Chinese MSW, the lack of operating experience, deficient fund for compliance with the emission standard, and the lack of reliable supervisory measures. Some perspectives and suggestions from both technical and managerial aspects are given for the compliance with the emission standard. This paper can provide strategic enlightenments for MSW management in China and other developing countries.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Planar Laser Imaging of Sprays for Liquid Rocket Studies

A planar laser imaging technique which incorporates an optical polarization ratio technique for droplet size measurement was studied. A series of pressure atomized water sprays were studied with this technique and compared with measurements obtained using a Phase Doppler Particle Analyzer. In particular, the effects of assuming a logarithmic normal distribution function for the droplet size distribution within a spray was evaluated. Reasonable agreement between the instrument was obtained for the geometric mean diameter of the droplet distribution. However, comparisons based on the Sauter mean diameter show larger discrepancies, essentially because of uncertainties in the appropriate standard deviation to be applied for the polarization ratio technique. Comparisons were also made between single laser pulse (temporally resolved) measurements with multiple laser pulse visualizations of the spray.

Lee, W.↗