Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Venus surface roughness and Magellan stereo data

Presented are results of some studies to develop tools useful for the analysis of Venus surface shape and its roughness. Actual work was focused on Maxwell Montes. The analyses employ data acquired by means of NASA's Magellan satellite. The work is primarily concerned with deriving measurements of the Venusian surface using Magellan stereo SAR. Roughness was considered by means of a theoretical analyses based on digital elevation models (DEM's), on single Magellan radar images combined with radiometer data, and on the use of multiple overlapping Magellan radar images from cycles 1, 2, and 3, again combined with collateral radiometer data.

Maurice, Kelly E.↗
NASA NTRS2001

Wind-Tunnel Investigations of Blunt-Body Drag Reduction Using Forebody Surface Roughness

This paper presents results of wind-tunnel tests that demonstrate a novel drag reduction technique for blunt-based vehicles. For these tests, the forebody roughness of a blunt-based model was modified using micomachined surface overlays. As forebody roughness increases, boundary layer at the model aft thickens and reduces the shearing effect of external flow on the separated flow behind the base region, resulting in reduced base drag. For vehicle configurations with large base drag, existing data predict that a small increment in forebody friction drag will result in a relatively large decrease in base drag. If the added increment in forebody skin drag is optimized with respect to base drag, reducing the total drag of the configuration is possible. The wind-tunnel tests results conclusively demonstrate the existence of a forebody dragbase drag optimal point. The data demonstrate that the base drag coefficient corresponding to the drag minimum lies between 0.225 and 0.275, referenced to the base area. Most importantly, the data show a drag reduction of approximately 15% when the drag optimum is reached. When this drag reduction is scaled to the X-33 base area, drag savings approaching 45,000 N (10,000 lbf) can be realized.

Whitmore, Stephen A.↗
NASA NTRS1972

Radar mapping of lunar surface roughness.

Comparison of anomalous behavior at infrared and radar wavelengths provides an estimation of lunar surface structure at centimeter-to-meter sizes. Although a simple classification is used, it is shown that the combination of the infrared and radar data contains more information than any of the sets by themselves. The infrared data indicate that bare surface rocks are the source of the roughness which generates enhanced radar backscatter. The different radar maps indicate the size of surface rocks, as was demonstrated for the strewn fields of centimeter-sized rubble (the Type II anomaly). As craters age, they have a rim-bright appearance in the radar maps, and eventually lose their anomalous-behavior at infrared and 3.8-cm radar wavelengths.

Thompson, T. W.↗
NASA NTRS1995

Cleanliness evaluation of rough surfaces with diffuse IR reflectance

Contamination on bonding surfaces has been determined to be a primary cause for degraded bond strength in certain solid rocket motor bondlines. Hydrocarbon and silicone based organic contaminants that are airborne or directly introduced to a surface are a significant source of contamination. Diffuse infrared (IR) reflectance has historically been used as an effective technique for detection of organic contaminants, however, common laboratory methods involving the use of a Fourier transform IR spectrometer (FTIR) are impractical for inspecting the large bonding surface areas found on solid rocket motors. Optical methods involving the use of acousto-optic tunable filters and fixed bandpass optical filters are recommended for increased data acquisition speed. Testing and signal analysis methods are presented which provide for simultaneous measurement of contamination concentration and roughness level on rough metal surfaces contaminated with hydrocarbons.

Pearson, L. H.↗
NASA NTRS2016

Rough Surfaces: Is the Dark Stuff Just Shadow?: "Who knows what evil lurks in the hearts of men? The shadow knows!"

Remote observations of the surfaces of airless planetary objects are fundamental to inferring the physical structure and compositional makeup of the surface material. A number of forward models have been developed to reproduce the photometric behavior of these surfaces, based on specific, assumed structural properties such as macroscopic roughness and associated shadowing. Most work of this type is applied to geometric albedos, which are affected by complicated effects near zero phase angle that represent only a tiny fraction of the net energy reflected by the object. Other applications include parameter fits to resolved portions of some planetary surface as viewed over a range of geometries. The spherical albedo of the entire object (when it can be determined) captures the net energy balance of the particle more robustly than the geometric albedo. In most treatments involving spherical albedos, spherical albedos and particle phase functions are often treated as if they are independent, neglecting the effects of roughness. In this paper we take a different approach. We note that whatever function captures the phase angle dependence of the brightness of a realistic rough, shadowed, flat surface element relative to that of a smooth granular surface of the same material, it is manifested directly in both the integral phase function and the spherical albedo of the object. We suggest that, where broad phase angle coverage is possible, spherical albedos may be easily corrected for the effects of shadowing using observed (or assumed) phase functions, and then modeled more robustly using smooth-surface regolith radiative transfer models without further imposed (forward-modeled) shadowing corrections. Our approach attributes observed "power law" phase functions of various slope (and "linear" ranges of magnitude-vs.-phase angle) to shadowing, as have others, and goes on to suggest that regolith-model-based inferences of composition based on shadow-uncorrected spherical albedos overestimate the amount of absorbing material contained in the regolith.

geometric albedos↗
NASA NTRS1984

A possibility of avoiding surface roughness due to insects

Discussion of a method for eliminating turbulence caused by the formation of insect roughness upon the leading edges and fuselage, particularly in aircraft using BLC. The proposed technique foresees the use of elastic surfaces on which insect roughness cannot form. The operational characteristics of highly elastic rubber surface fastened to the wing leading edges and fuselage edges are examined. Some preliminary test results are presented. The technique is seen to be advantageous primarily for short-haul operations.

Wortmann, F. X.↗
DOE OSTI2022

ICP etching of GaN microstructures in a Cl 2 –Ar plasma with subnanometer-scale sidewall surface roughness

In this work, substrate temperature, RF power, and ICP power were investigated for their effects on GaN micropillar sidewall roughness and etch characteristics. Elevated substrate temperature was shown to improve the sidewall etch morphology at low RF powers (reduced physical bombardment) and low ICP powers (lower plasma densities). Increased lateral etching is observed with both increased ICP power and substrate temperature, which both act to increase the chemical component of the etch. Etch conditions with a high chemical driving force resulted in faceting along the a-plane on the sidewalls. This faceting produced extremely smooth surfaces with root-meansquare roughness (R q ) as low as 0.20 nm which is comparable to typical epitaxy-ready surfaces and smaller than the a-plane lattice spacing of 0.3186 nm. The smooth surfaces produced in this study enable possibilities for laser facets or for new device structures that require high quality surfaces for GaN regrowth.

36 MATERIALS SCIENCE↗
NASA NTRS2024

Impact of Random Micron-Sized Surface Roughness on Stationary Crossflow Instabilities

This study examines the effect of random micron-sized distributed roughness on stationary crossflow (SCF) instabilities. The roughness parameters are varied by creating nanoparticle coatings of various formulations and applying them to inserts that cover approximately the first 14% of the swept flat-plate model. In addition to the baseline configuration (no added roughness, root-mean-square (RMS) ≈ 0.4 µm ), 5 panels with RMS roughness values of 4.8 up to 17 µm and correlation lengths ranging from 92 to 876 µm were tested. Despite the significant roughness levels tested, the transition location was found to be only mildly impacted by the additional roughness. However, the SCF amplitudes and wavelength content were found to vary substantially depending on the roughness input. The results were somewhat unexpected, in that the panel with the highest roughness RMS level did not result in the largest initial amplitudes, nor did the panel with the most energy in the SCF wavelength range. Rather, the panel with the most energy in the smaller wavelengths resulted in the largest SCF amplitude. There were, however, significant variations in the results when the panels were rotated by 180 ◦ , indicating that the important factor for some of the panels may be isolated peaks that occur near the neutral point.

stationary crossflow instabilities↗
NASA NTRS1983

Surface roughness effects with solid lubricants dispersed in mineral oils

The lubricating effectiveness of solid-lubricant dispersions are investigated in both point and line contacts using surfaces with both random and directional roughness characteristics. Friction and wear data obtained at relatively low speeds and at room temperature, indicate that the existence of solid lubricants such as graphite, MoS2, and PTFE in a plain mineral oil generally will not improve the effectiveness of the oil as a lubricant for such surfaces. Under boundary lubrication conditions, the friction force, as a function of time, initially depends upon the directional roughness properties of the contacting surfaces irrespective of whether the base oil or dispersions are used as lubricants.

Cusano, C.↗
NASA NTRS1993

Surface roughness due to residual ice in the use of low power deicing systems

Thicknesses of residual ice are presented to provide information on surface contamination and associated roughness during deicing events. Data was obtained from low power ice protection systems tests conducted in the Icing Research Tunnel at NASA Lewis Research Center (LeRC) with nine different deicing systems. Results show that roughness associated with residual ice is not characterized by uniformly distributed roughness. Results also show that deicing systems require a critical mass of ice to generate a sufficient expelling force to remove the ice.

Shin, Jaiwon↗
NASA NTRS1993

Surface roughness due to residual ice in the use of low power deicing systems

Thicknesses of residual ice are presented to provide information on surface contamination and associated roughness during deicing events. Data was obtained from low power ice protection systems tests conducted in the Icing Research Tunnel at NASA Lewis Research Center (LeRC) with nine different deicing systems. Results show that roughness associated with residual ice is not characterized by uniformly distributed roughness. Results also show that deicing systems require a critical mass of ice to generate a sufficient expelling force to remove the ice.

Shin, Jaiwon↗
NASA NTRS2013

Impact of Surface Roughness and Soil Texture on Mineral Dust Emission Fluxes Modeling

Dust production models (DPM) used to estimate vertical fluxes of mineral dust aerosols over arid regions need accurate data on soil and surface properties. The Laboratoire Inter-Universitaire des Systemes Atmospheriques (LISA) data set was developed for Northern Africa, the Middle East, and East Asia. This regional data set was built through dedicated field campaigns and include, among others, the aerodynamic roughness length, the smooth roughness length of the erodible fraction of the surface, and the dry (undisturbed) soil size distribution. Recently, satellite-derived roughness length and high-resolution soil texture data sets at the global scale have emerged and provide the opportunity for the use of advanced schemes in global models. This paper analyzes the behavior of the ERS satellite-derived global roughness length and the State Soil Geographic data base-Food and Agriculture Organization of the United Nations (STATSGO-FAO) soil texture data set (based on wet techniques) using an advanced DPM in comparison to the LISA data set over Northern Africa and the Middle East. We explore the sensitivity of the drag partition scheme (a critical component of the DPM) and of the dust vertical fluxes (intensity and spatial patterns) to the roughness length and soil texture data sets. We also compare the use of the drag partition scheme to a widely used preferential source approach in global models. Idealized experiments with prescribed wind speeds show that the ERS and STATSGO-FAO data sets provide realistic spatial patterns of dust emission and friction velocity thresholds in the region. Finally, we evaluate a dust transport model for the period of March to July 2011 with observed aerosol optical depths from Aerosol Robotic Network sites. Results show that ERS and STATSGO-FAO provide realistic simulations in the region.

textures↗
NASA NTRS1953

Investigation of the Attenuation of Plane Shock Waves Moving over very Rough Surfaces

Experimental measurements of the attenuation of plane shock waves moving over rough walls have been made in a shock tube. Measurements of the boundary-layer characteristics, including thickness and velocity distribution behind the shock, have also been made with the aid of new cal techniques which provide direct information on the local boundary-layer conditions at the rough walls. Measurements of shock speed and shock pressure ratio are presented for both smooth-wall and rough-wall flow over lengths of machined-smooth and rough strips which lined all four walls of the shock tube. A simplified theory based on Von Karman's expression for skin-friction coefficient for flow over rough walls, along with a wave-model concept and extensions to include time effects, is presented. In this theory, the shock-tube flow is assumed to be one-dimensional at all times and the wave-model concept is used to relate the local layer growth to decreases in shock strength. This concept assumes that local boundary-layer growths act as local mass-flow sinks, which give rise to expansion waves which, in turn, overtake the shock and lower its mass flow accordingly.

Huber, Paul W.↗
NASA NTRS2020

Design and Testing of an Ultra-Light Weight Perching System for Sloped or Vertical Rough Surfaces on Mars

In this paper, we present the design, characterization, and functional demonstration of a perching system that enables a flying vehicle to land on rough sloped or vertical surfaces. Steep slopes are of particular scientific interest since they are often associated with geologically interesting features including sites of active modification (e.g. landslides/avalanches, slope streaks), exposed bedrock and/or ice, and as-yet unmodified young features (e.g. walls of fresh craters or polar pits that are actively expanding). However the steep nature of these sites makes access with traditional field robots difficult: ground vehicles are unable to traverse the steep terrain and aerial vehicles are limited by their flight time and an ability to operate near terrain. We propose to address these limitation by enabling the UAV to reliably perch on steep terrain to perform in situ measurements and collect samples. Perching also enables a solar powered UAV to traverse large terrain features such as the Valles Marineris that could not be covered in a single flight by repeatedly perching and recharging its batteries. The proposed perching system that is being developed consists of a microspine gripper, a compliant gripper to vehicle interface, and a flying vehicle equipped with an autonomy sensor suite. The system also includes perception and control algorithms that identify perching targets and execute the required perching maneuver. To date, the majority of the effort has focused on developing and characterizing the microspine gripper. The initial prototype weighs 100 g, is capable of securely grasping a range of natural surfaces, and successful grasps support loads of over 10 N. Refinement of the gripper, integrating and testing it on a UAV, measuring aerodynamic distrubances from wall effects, and developing the required perception and control algorithms is ongoing. This paper describes the overall architecture of our proposed system, the design of the gripper, and its performance during initial testing.

Backus, Spencer↗
NASA NTRS1972

Microwave emission measurements of sea surface roughness, soil moisture, and sea ice structure

In order to demonstrate the feasibility of the microwave radiometers to be carried aboard the Nimbus 5 and 6 satellites and proposed for one of the earth observatory satellites, remote measurements of microwave radiation at wavelengths ranging from 0.8 to 21 cm have been made of a variety of the earth's surfaces from the NASA CV-990 A/C. Brightness temperatures of sea water surfaces of varying roughness, of terrain with varying soil moisture, and of sea ice of varying structure were observed. In each case, around truth information was available for correlation with the microwave brightness temperature. The utility of passive microwave radiometry in determining ocean surface wind speeds, at least for values higher than 7 meters/second has been demonstrated. In addition, it was shown that radiometric signatures can be used to determine soil moisture in unvegetated terrain to within five percentage points by weight. Finally, it was demonstrated that first year thick, multi-year, and first year thin sea ice can be distinguished by observing their differing microwave emissivities at various wavelengths.

Gloersen, P.↗
NASA NTRS1999

Method for Fabricating Soft Tissue Implants with Microscopic Surface Roughness

A method for fabricating soft tissue implants using a mold. The cavity surface of an initially untextured mold. made of an organic material such as epoxy. is given a thin film coating of material that has pinholes and is resistant to atomic particle bombardment. The mold cavity surface is then subjected to atomic particle bombardment, such as when placed in an isotropic atomic oxygen environment. Microscopic depressions in the mold cavity surface are created at the pinhole sites on the thin film coating. The thin film coating is removed and the mold is then used to cast the soft tissue implant. The thin film coating having pinholes may be created by chilling the mold below the dew point such that water vapor condenses upon it; distributing particles, that can partially dissolve and become attached to the mold cavity surface, onto the mold cavity surface; removing the layer of condensate, such as by evaporation; applying the thin film coating over the entire mold surface; and, finally removing the particles, such as by dissolving or brushing it off. Pinholes are created in the thin film coating at the sites previously occupied by the particles.

Banks, Bruce A.↗
NASA NTRS2021

Impact of Random and Periodic Surface Roughness on P- and L-band Radiometry

L-band passive microwave remote sensing is currently considered a robust technique for global monitoring of soil moisture. However, soil roughness complicates the relationship between brightness temperature and soil moisture, with current soil moisture retrieval algorithms typically assuming a constant roughness parameter globally, leading to a potential degradation in retrieval accuracy. This current investigation established a tower-based experiment site in Victoria, Australia. P-band (~40-cm wavelength/0.75 GHz) was compared with L-band (~21-cm wavelength/1.41 GHz) over random and periodic soil surfaces to determine if there is an improvement in brightness temperature simulation and soil moisture retrieval accuracy for bare soil conditions, due to reduced roughness impact when using a longer wavelength. The results showed that P-band was less impacted by random and periodic roughness than L-band, evidenced by more comparable statistics across different roughness conditions. The roughness effect from smooth surfaces (e.g., 0.8-cm root-mean-square height and 11.1-cm correlation length) could be potentially ignored at both P- and L-band with satisfactory simulation and retrieval performance. However, for rougher soil (e.g., 1.6-cm root-mean-square height and 6.8-cm correlation length), the roughness impact needed to be accounted for at both P- and L-band, with P-band observations showing less impact than L-band. Moreover, a sinusoidal soil surface with 10-cm amplitude and 80-cm period substantially impacted the brightness temperature simulation and soil moisture retrieval at both P- and L-band, which could not be fully accounted for using the SMOS and SMAP default roughness parameters. However, when retrieving roughness parameters along with soil moisture, the ubRMSE at P-band over periodic soil was improved to a similar level (0.01-0.02 m3/m3) as that of smooth flat soil (0.01 m3/m3), while L-band showed higher ubRMSE over the periodic soil (0.03-0.04 m3/m3) than over smooth flat soil (0.01 m3/m3). Accordingly, periodic roughness effects were reduced by using observations at P-band.

Soil roughness↗