Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “support structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Lessons Learned from Three Agrivoltaic Installations in New Jersey

Agrivoltaics is a new technology that has the potential to positively impact commercial farming by combining agricultural practices with the generation of solar energy. While some yield reduction is to be expected, resulting from less sunlight reaching the plant canopy and ground occupied by support structures, the generated electricity provides a low-risk supplemental income to farmers. In order to combine farming with electricity generation, agrivoltaic systems use a lower ground coverage ratio compared to normal solar farms and the PV panels are often mounted higher above the ground in order to facilitate the movement of agricultural equipment and to reduce the contrast between shaded and non-shaded areas. With funding provided from the state of New Jersey and the New Jersey Agricultural Experiment Station (NJAES), we designed and installed three unique agrivoltaic research systems at Rutgers/NJAES farms. These projects were recently completed and are generating electricity that is exported to the grid. This paper discusses the lessons we have learned along the way, including all the steps necessary to see an agrivoltaic project through to completion.

14 SOLAR ENERGY↗
DOE OSTI2024

Assessment of Measurement Uncertainties in the Jupiter High-240 Experiment

The Jupiter High-240 experiment performed in May of 2019 was previously discussed as a variant of the original Jupiter experiment incorporating plutonium metal alloy fuel plates with higher 240Pu content and lead plates, using both a reference configuration and a second configuration where eight lead plates were replaced with aluminum to simulate voiding. Measurements were recorded for experiment period, the “pressure” of the Comet ram upon closure for each near-critical measurement, and temperature. The experiment reactor period is the time it would take to increase the neutron population by a factor of e. For this experiment, the copper reflectors and upper third of the fuel sits upon a support structure with the lower fuel arrays raised up into the center of the reflectors using a ram (see Fig. 1). The recorded logbook temperature for each measurement corresponds to a resistance temperature detector (RTD) located at the top center of the upper fuel array. This paper summarizes the evaluated uncertainties for the Jupiter High 240 experiment as contributed via the recorded measurements and nuclear data and their assessed impact upon the computation of system reactivity and eigenvalue.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Measurement of Wind Loading on Heliostats at the Crescent Dunes Power Plant: An Overview

The cost of solar collectors constitutes almost one third of the total cost of a CSP plant. One of the ongoing challenges in the design of these collectors is wind loading on mirrors, support structures, and drives. A particular challenge is dynamic wind loading, caused by the turbulent wind flow. To date, the design of solar collector structures has relied on wind tunnel experiments and numerical simulations that do not entirely capture the dynamic effects observed at scale. The CSP industry has shown increased interest in validating the idealized assumptions with measurements obtained in operational settings to improve wind load assumptions and increase reliability and cost-efficiency of the collector design. Further, performance models need realistic assumptions about wind loading and its impact on optical performance. In a parabolic trough field campaign, NREL successfully collected a wealth of long-term, high-resolution wind and loads data [2], that are publicly available and that can be used for the above-mentioned purposes. Heliostats are impacted differently by wind than parabolic troughs, due to their different shape, size, and field layout. To study the impact of wind and turbulence on heliostats, we initiated another field campaign in an operational power- tower plant, Crescent Dunes, in Nevada, USA. In this work, we present an overview of the measurements, first results, and potential implications of wind driven loads on Heliostats.

concentrated solar power↗
DOE OSTI2024

Scaffolding matrix with internal nanoparticles

A battery electrode composition is provided comprising composite particles, with each composite particle comprising active material and a scaffolding matrix. The active material is provided to store and release ions during battery operation. For certain active materials of interest, the storing and releasing of the ions causes a substantial change in volume of the active material. The scaffolding matrix is provided as a porous, electrically-conductive scaffolding matrix within which the active material is disposed. In this way, the scaffolding matrix structurally supports the active material, electrically interconnects the active material, and accommodates the changes in volume of the active material.

Yushin, Gleb↗
DOE OSTI1989

Nuclear Safety [Vol. 30, No. 1, January-March 1989]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 International Conference on Thermal Reactor Safety: NUCSAFE 88 by A. P. Malinauskas and J. G. Pruett; ACCIDENT ANALYSIS: 18 Chernobyl Today: State of Research by A. Yu. Gagarinskii; CONTROL AND INSTRUMENTATION: 23 Problems Associated with Routine In-Plant Radioactive Effluent Monitoring Systems at U.S. Light-Water Reactors by Barry G. Wahlig, David M. Walker, Mahmoud R. Ghavi, and John M. Palms; DESIGN FEATURES: 34 Twentieth DOE/NRC Nuclear Air-Cleaning Conference by R. R. Bellamy, D. W. Moeller, and M. W. First, 46 Design Options for the Core Support Structure for Liquid-Metal-Cooled Reactor Plants by J. P. Burelbach, W. J. Kann, J. G. Saiveau, and R. W. Seidensticker; ENVIRONMENTAL EFFECTS: 53 The Radiological Consequences of the Chernobyl Accident by L. V. Konstantinov and A. J. González; WASTE AND SPENT FUEL MANAGEMENT: 70 Activities Related to Waste Management Compiled by E. G. Silver; OPERATING EXPERIENCES: 80 Fuel Performance Annual Report for 1986 by W. J. Bailey, 103 Safety Considerations Related to 12-Hour Shift Schedules by S. Gould, 105 Reactor Shutdown Experience Compiled by J. W. Cletcher, 108 Operating U.S. Power Reactors Compiled by E. G. Silver; RECENT DEVELOPMENTS: 130 General Administrative Activities Compiled by E. G. Silver, 140 Reports, Standards, and Safety Guides by D. S. Queener, 145 Status of Power-Reactor Licensing Activities Compiled by E. G. Silver, 153 Proposed Rule Changes as of Sept. 30, 1988; ANNOUNCEMENTS: 69 Northwestern University Short Course on Radiation Safety, 79 International Seminar on Fission Product Transport Processes in Reactor Accidents, 129 Harvard School of Public Health Offers Short Courses, 152 MIT Offers Summer Short Courses on Reactor Safety and Nodal Analysis, 152 Seminar on Use of PCs in Probabilistic Safety Analysis, 157 The Authors, 160 Indexes to Nuclear Safety, Volume 29.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

SPC-70731 Rev 0 MARVEL Reactor Project ASME BPVC Section III Division 5 Design Specification

This specification establishes the requirements for the design of the MARVEL Primary Coolant System (PCS) Boundary, Guard Vessel System (GVS) Boundary, Core Support Structure (CSS), and Internal Heat Exchanger (IHX) Liner to provide a complete basis for ASME BPVC Section III Division 5 construction. All information in this section is generic and applicable to all metallic components unless otherwise specified.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2023

Genomic variation across Chinook salmon populations reveals effects of a duplication on migration alleles and supports fine scale structure

Abstract The distribution of ecotypic variation in natural populations is influenced by neutral and adaptive evolutionary forces that are challenging to disentangle. This study provides a high‐resolution portrait of genomic variation in Chinook salmon ( Oncorhynchus tshawytscha ) with emphasis on a region of major effect for ecotypic variation in migration timing. With a filtered data set of ~13 million single nucleotide polymorphisms (SNPs) from low‐coverage whole genome resequencing of 53 populations (3566 barcoded individuals), we contrasted patterns of genomic structure within and among major lineages and examined the extent of a selective sweep at a major effect region underlying migration timing (GREB1L/ROCK1). Neutral variation provided support for fine‐scale structure of populations, while allele frequency variation in GREB1L/ROCK1 was highly correlated with mean return timing for early and late migrating populations within each of the lineages ( r 2 = .58–.95; p < .001). However, the extent of selection within the genomic region controlling migration timing was much narrower in one lineage (interior stream‐type) compared to the other two major lineages, which corresponded to the breadth of phenotypic variation in migration timing observed among lineages. Evidence of a duplicated block within GREB1L/ROCK1 may be responsible for reduced recombination in this portion of the genome and contributes to phenotypic variation within and across lineages. Lastly, SNP positions across GREB1L/ROCK1 were assessed for their utility in discriminating migration timing among lineages, and we recommend multiple markers nearest the duplication to provide highest accuracy in conservation applications such as those that aim to protect early migrating Chinook salmon. These results highlight the need to investigate variation throughout the genome and the effects of structural variants on ecologically relevant phenotypic variation in natural species.

Horn, Rebekah L.↗
DOE OSTI2024

STRUCTURAL MODELING TO SUPPORT POST-YIELD ACCEPTANCE CRITERIA FOR SPENT NUCLEAR FUEL CLADDING

Spent nuclear fuel (SNF) is evaluated for structural failure during storage and transportation scenarios. The U.S. Department of Energy’s Spent Fuel and Waste Science and Technology (SFWST) program has sponsored significant research in quantifying mechanical loads on SNF during storage and transportation scenarios using experimental and modeling methods. The SFWST program has also performed significant research on measuring the mechanical behavior of irradiated SNF as defueled cladding segments and cladding with fuel pellets to measure composite behavior. This paper considers some of the key material data from the Sibling Pin testing and uses structural modeling and analysis methods that have been informed by testing to consider post-yield acceptance criteria for SNF cladding structural analysis. Test data published by Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) are the foundation for informing the material behavior of the models developed in this study. In particular, four-point bend (4PB) tests of fueled and defueled cladding segments provide significant information about the bending failure mode of SNF. ORNL’s 4PB test data is on fueled cladding segments, so the composite behavior of SNF is demonstrated. This paper describes PNNL’s coincident beam model that was developed to approximate the composite behavior of SNF. This paper also presents PNNL’s structural dynamic finite element models of a cask tip-over scenario, which is predicted to cause the strongest mechanical loads on SNF of all postulated storage and transportation scenarios. SNF bending loads predicted in the cask tip-over scenario and cladding acceptance criteria beyond yield are considered, with justification based on the Sibling Pin test data. ASME Boiler and Pressure Vessel code stress intensity limits are also considered. The ultimate goal of this work is to aid in the justification of structural acceptance criteria for SNF cladding beyond the cladding’s irradiated yield strength for use in structural analysis of all storage and transportation scenarios.

Klymyshyn, Nicholas A.↗
DOE OSTI2021

Scaleup and manufacturability of symmetric-structured metal-supported solid oxide fuel cells

Metal-supported solid oxide fuel cells with symmetric architecture, having metal supports on both sides of the cell, are scaled up from button cell size to large 50 cm 2 active area cell size. The cells remain flat after sintering assisted by the symmetric structure. Equivalent performance is achieved for button cells and large cells, and thermal cycling and redox cycling tolerance are demonstrated for the large cells. The catalyst infiltration process is improved to enable high-throughput manufacturing. The cumbersome lab-scale molten nitrate infiltration process is replaced with a room-temperature process in which a shelf-stable aqueous solution of nitrate salts is applied to the cell by spraying, painting, or other scalable techniques. Here, a fast-ramp thermal conversion of the nitrate salts to the final oxide catalyst composition is implemented, allowing many infiltration cycles to be accomplished in a single work shift. Increasing the number of infiltration cycles from 5 to 10 led to an increase in peak power density from approximately 0.3 to 0.52 W cm -2 .

25 ENERGY STORAGE↗
DOE OSTI2023

Ab Initio Molecular Dynamics Spectra for Characterization of Hydrated Al 2 O 3 Supported MoO x

The structure of supported MoO x /Al 2 O 3 catalysts is investigated using ab initio molecular dynamics (AIMD) and density-functional theory (DFT). Phase diagrams were computed to understand the hydroxylation coverage as a function of the temperature, H 2 O partial pressure, and MoO x loading. We relate the shifts in experimental Raman vibrational frequencies under hydrated conditions to hydrogen bonding interactions and the MoO x anchoring location. We showcase that the use of AIMD as a benchmark for DFT can provide insight into how, under certain hydrated conditions, DFT excels as an inexpensive method for computing vibrational frequencies, while, under dehydrated conditions, it is susceptible to the largest errors. Additionally, to facilitate the analysis of the hydroxyl region of experimental infrared spectra, we compute the power spectra of individual hydroxyls and see a strong relationship between OH stretching frequencies and the surrounding coordination environment, which are also impacted by anchored MoO x . Here, we compare computational and experimental IR and Raman spectra of catalysts synthesized herein under the same conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Market Structure Evaluation to Support the Clean Energy Transition

One can argue that wholesale electricity markets in the United States are a grand experiment with scarcely two decades of operational experience in their current form. A wide body of literature points out short comings of these markets function today, ranging from problems of missing money to negative prices for real-time electricity prices. The purpose of this report is to outline a framework by which energy policies and market structures can be evaluated to ascertain the impact these institutions have on electricity generators. The report describes an evaluated framework to compare energy policy then it discusses fundamental differences in regulated versus deregulated electricity markets. Then the report leverages these sections to describe assessment needs for quantifying aggregate impacts to generators.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Unit cell manufacture by blown powder directed energy deposition

Lattice structures manufactured by additive manufacturing show unique promise to alter existing components to improve the thermo-mechanical properties of the base structure. Here, in the present study, the manufacture of a self-supporting lattice structure by blown powder directed energy deposition was explored. Converging struts were manufactured using multiple lean angles to facilitate the self-supporting structure and to avoid machine-part collisions. The struts showed near uniform straightness relative to a fitted line with a maximum deviation of 1mm at a lean angle of 10°. Micro–hardness and porosity evaluation results showed no significant variation along the struts.

Additive manufacturing↗
DOE OSTI2023

Effects of surface acidity on the structure of organometallics supported on oxide surfaces

Well-defined organometallics supported on high surface area oxides are promising heterogeneous catalysts. An important design factor in these materials is how the metal interacts with the functionalities on an oxide support, commonly anionic X-type ligands derived from the reaction of an organometallic M–R with an –OH site on the oxide. The metal can either form a covalent M–O bond or form an electrostatic M + $\cdots$ – O ion-pair, which impacts how well-defined organometallics will interact with substrates in catalytic reactions. However, a less common reaction pathway involves the reaction of a Lewis site on the oxide with the organometallic, resulting in abstraction to form an ion-pair, which is relevant to industrial olefin polymerization catalysts. This Feature Article views the spectrum of reactivity between an organometallic and an oxide through the prism of Brønsted and/or Lewis acidity of surface sites and draws analogies to the molecular frame where Lewis and Brønsted acids are known to form reactive ion-pairs. Applications of the well-defined sites developed in this article are also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tension‐Induced Cavitation in Li‐Metal Stripping

Abstract Designing stable Li metal and supporting solid structures (SSS) is of fundamental importance in rechargeable Li‐metal batteries. Yet, the stripping kinetics of Li metal and its mechanical effect on the supporting solids (including solid electrolyte interface) remain mysterious to date. Here, through nanoscale in situ observations of a solid‐state Li‐metal battery in an electron microscope, two distinct cavitation‐mediated Li stripping modes controlled by the ratio of the SSS thickness ( t ) to the Li deposit's radius ( r ) are discovered. A quantitative criterion is established to understand the damage tolerance of SSS on the Li‐metal stripping pathways. For mechanically unstable SSS ( t / r < 0.21), the stripping proceeds via tension‐induced multisite cavitation accompanied by severe SSS buckling and necking, ultimately leading to Li “trapping” or “dead Li” formation; for mechanically stable SSS ( t / r > 0.21), the Li metal undergoes nearly planar stripping from the root via single cavitation, showing negligible buckling. This work proves the existence of an electronically conductive precursor film coated on the interior of solid electrolytes that however can be mechanically damaged, and it is of potential importance to the design of delicate Li‐metal supporting structures to high‐performance solid‐state Li‐metal batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Determining the Three-Dimensional Structures of Silica-Supported Metal Complexes from the Ground Up

The immobilization of molecularly precise metal complexes to substrates, such as silica, provides an attractive platform for the design of active sites in heterogeneous catalysts. Specific steric and electronic variations of the ligand environment enable the development of structure–activity relationships and the knowledge-driven design of catalysts. At present, however, the three-dimensional environment of the precatalyst, much less the active site, is generally not known for heterogeneous single-site catalysts. We explored the degree to which NMR-based surface-to-complex interatomic distances could be used to solve the three-dimensional structures of three silica-supported metal complexes. Furthermore, the structure solution revealed unexpected features related to the environment around the metal that would be difficult to discern otherwise. This approach appears to be highly robust and, due to its simplicity, is readily applied to most single-site catalysts with little extra effort.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigating Electron Conductivity Regimes in the Bacterial Cytochrome Wire OmcS

The anaerobic bacterium Geobacter sulfurreducens produces extracellular, electronically conductive cytochrome polymer wires that are conductive over micron length scales. Structure models from cryo-electron microscopy data show OmcS wires form a linear chain of hemes along the protein wire axis, which is proposed as the structural basis supporting their electronic properties. However, the mechanism by which this heme arrangement supports long-range electronic conduction remains unknown. Structure models from cryo-electron microscopy data show these wires form a linear chain of hemes along the protein wire axis, which is proposed as the structural basis supporting their electronic properties. Existing computational models using static heme redox potentials and coupling energies fail to explain experimental observations, predicting conductances 10,000 to 100,000 times lower than measured values. Here, we investigate how dynamic disorder affects site energies, interheme coupling, and long-range electronic conductivity within these cytochrome wires. We introduce an approach to extract charge carrier site information directly from Kohn–Sham density functional theory, without employing projector schemes, and show that site and coupling energies are highly sensitive to changes in interheme geometry and the surrounding electrostatic environment. Unlike models that incorporate dynamic disorder as a thermally averaged quantity, our quantum charge carrier model incorporates proxies for dynamic disorder through decoherence corrections, yielding predicted diffusion coefficient closer to what is expected from experiment and comparable with other organic-based electronic materials. Based on these simulations, we propose that the instantaneous fluctuations of the local electrostatic environment can transiently lift energy degeneracies and delocalize charge carriers. Furthermore, these studies reveal how incorporating dynamic fluctuations associated with the environment resolves the discrepancy between theory and experiment in microbial cytochrome wires and highlight design principles for bioinspired, heme-based conductive materials.

Bioinorganic chemistry↗
DOE OSTI2021

Structure and Oxygen Evolution Activity of β-NiOOH: Where Are the Protons?

Ni oxides and oxyhydroxides (NiO x ) have been studied for a long time as cathode materials for alkaline batteries and electrocatalysts for the oxygen evolution reaction (OER). Yet, understanding of the connection between their atomic and electronic structures and electrochemical performance or stability is still incomplete. In this work, we use first-principles density functional theory (DFT) calculations to revisit the structure, electronic properties, and OER activity of β-NiOOH, the catalytically active phase of NiO x . Following extensive DFTbased screening, we identify a hitherto overlooked structure characterized by a uniform distribution of H atoms on the NiO 2 layers. All the Ni 3+ cations in this structure exhibit an identical t g 6 e g 1 electronic configuration with an occupied 3d z2 orbital. Comparison of the calculated bond lengths with extended X-ray absorption fine structure (EXAFS) data unequivocally supports this structure relative to all other low-energy configurations. Based on this structure, we uncover and detail defect-dominated OER mechanisms on the basal β-NiOOH (001) surface, with overpotentials as low as 0.39 V. The present results should provide a valuable contribution to ongoing efforts for understanding and developing enhanced transition-metal hydroxide catalysts for the OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗