Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sulfide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

New Compounds and Phase Selection of Nickel Sulfides via Oxidation State Control in Molten Hydroxides

Molten salts are promising reaction media candidates for the discovery of novel materials; however, they offer little control over oxidation state compared to aqueous solutions. Here, we demonstrated that when two hydroxides are mixed, their melts become fluxes with tunable solubility, which are surprisingly powerful solvents for ternary chalcogenides and offer effective paths for crystal growth to new compounds. We report that precise control of the oxidation state of Ni is achievable in mixed molten LiOH/KOH to grow single crystals of all known ternary K-Ni-S compounds. It is also possible to access several new phases, including a new polytope of β-K 2 Ni 3 S 4 , as well as low-valence KNi 4 S 2 and K 4 Ni 9 S 11 . KNi 4 S 2 is a two-dimensional low-valence nickel-rich sulfide, and β-K 2 Ni 3 S 4 has a hexagonal lattice. Moreover, using KNi 4 S 2 as a template, we obtained a new layered binary Ni 2 S by topotactic deintercalation of K. The new binary Ni 2 S has a van der Waals gap and can function as a new host layer for intercalation chemistry, as demonstrated by the intercalation of LiOH between its layers. The oxidation states of low-valence KNi 4 S 2 and Ni 2 S were studied using X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. Density functional theory calculations showed large antibonding interactions at the Fermi level for both KNi 4 S 2 and Ni 2 S 2 corresponding to the flat-bands with large Ni-d$_{x^2}$$_{y^2}$ character.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Conversion of Compositionally Diverse Plastic Waste over Earth-Abundant Sulfides

Chemical deconstruction of polyolefin plastic wastes via hydroconversion is promising for mitigating plastic accumulation in landfills and the environment. However, hydroconversion catalysts cannot handle complex feedstocks containing multiple polymers, additives, and heteroatom impurities. Here, we report a single-step strategy using earth-abundant metal sulfide catalysts to deconstruct these wastes. We show that NiMoS x /HY catalysts deconstruct polyolefin feedstocks, achieving ~81–94% selectivity to liquid products. Postsynthetic zeolite modification enhances the catalyst’s activity by >2.5 times, achieving over 95% selectivity to liquid fuels with controllable product distribution in the naphtha, jet fuel, and diesel range. The catalyst is resilient to increasingly complex feedstocks, such as additive-containing polymers and mixed plastics composed of polyolefins and heteroatom-containing polymers, including poly(vinyl chloride). As a result, we extend the strategy to single-use polyolefin wastes that can generate toxic byproducts, such as HCl and NH 3 , and eliminate their emissions by integrating reaction and sorption in a one-step process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Seasonal Evolution of Canopy Stomatal Conductance for a Prairie and Maize Field in the Midwestern United States from Continuous Carbonyl Sulfide Fluxes

Abstract There are inherent challenges in scaling stomatal conductance (g ) from leaf to canopy particularly over seasonal time scales when species distribution and canopy structure evolve. We address this gap using carbonyl sulfide (OCS) and CO fluxes from a predominantly C3 prairie and C4 maize field in the midwestern United States. The g derived from OCS fluxes captured a transition in the stomatal limitation on gross primary productivity (GPP) through the growing season as well as seasonally persistent g dynamics such as temperature optimum and a positive response of nighttime g to vapor pressure deficit. Near the termination of the prairie growing season, we observed a decrease in the relative OCS to CO flux that we hypothesize emerged from a rising contribution of C4 plants to productivity. The results show how plot‐scale OCS and CO fluxes can be used as a trace gas diagnostic for transitions in the limiting factors for community GPP.

Berkelhammer, M.↗
DOE OSTI2020

Anthropogenic Impacts on Atmospheric Carbonyl Sulfide Since the 19th Century Inferred From Polar Firn Air and Ice Core Measurements

Carbonyl sulfide (COS) was measured in firn air collected during seven different field campaigns carried out at four different sites in Greenland and Antarctica between 2001 and 2015. A Bayesian probabilistic statistical model is used to conduct multisite inversions and to reconstruct separate atmospheric histories for Greenland and Antarctica. The firn air inversions cover most of the 20th century over Greenland and extend back to the 19th century over Antarctica. The derived atmospheric histories are consistent with independent surface air time series data from the corresponding sites and the Antarctic ice core COS records during periods of overlap. Atmospheric COS levels began to increase over preindustrial levels starting in the 19th century, and the increase continued for much of the 20th century. Atmospheric COS peaked at higher than present-day levels around 1975 CE over Greenland and around 1987 CE over Antarctica. An atmosphere/surface ocean box model is used to investigate the possible causes of observed variability. The results suggest that changes in the magnitude and location of anthropogenic sources have had a strong influence on the observed atmospheric COS variability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Quantifying Northern High Latitude Gross Primary Productivity (GPP) Using Carbonyl Sulfide (OCS)

The northern high latitude (NHL, 40°N to 90°N) is where the second peak region of gross primary productivity (GPP) other than the tropics. The summer NHL GPP is about 80% of the tropical peak, but both regions are still highly uncertain. Carbonyl sulfide (OCS) provides an important proxy for photosynthetic carbon uptake. Here we optimize the OCS plant uptake fluxes across the NHL by fitting atmospheric concentration simulation with the GEOS-CHEM global transport model to the aircraft profiles acquired over Alaska during NASA's Carbon in Arctic Reservoirs Vulnerability Experiment (2012–2015). We use the empirical biome-specific linear relationship between OCS plant uptake flux and GPP to derive the six plant uptake OCS fluxes from different GPP data. Such GPP-based fluxes are used to drive the concentration simulations. We evaluate the simulations against the independent observations at two ground sites of Alaska. The optimized OCS fluxes suggest the NHL plant uptake OCS flux of -247 Gg S year -1 , about 25% stronger than the ensemble mean of the six GPP-based OCS fluxes. GPP-based OCS fluxes systematically underestimate the peak growing season across the NHL, while a subset of models predict early start of season in Alaska, consistent with previous studies of net ecosystem exchange. The OCS optimized GPP of 34 PgC yr -1 for NHL is also about 25% more than the ensembles mean from six GPP data. Further work is needed to fully understand the environmental and biotic drivers and quantify their rate of photosynthetic carbon uptake in Arctic ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Remotely Sensed Carbonyl Sulfide Constrains Model Estimates of Amazon Primary Productivity

We report understanding the magnitude of tropical gross primary production (GPP) is critical for carbon cycle modeling and climate projections, but this quantity is poorly constrained at regional scales. Biospheric uptake of carbonyl sulfide (OCS) provides a promising approach to estimating regional GPP. Here, we simulate OCS concentrations driven by surface flux scenarios encompassing a wide range of GPP estimates for the Amazon basin. We compare the model output to satellite retrievals and find a regional GPP estimate of 2375 ± 914 g(C) m –2 yr –1 , consistent with previous estimates, including the TRENDY model ensemble range of 1431–3812 g(C) m –2 yr –1 .

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Soil Carbonyl Sulfide (OCS) Fluxes in Terrestrial Ecosystems: An Empirical Model

Measurements of carbonyl sulfide (OCS) enable independent estimates of regional stomatal conductance provided that non-stomatal OCS fluxes are well constrained. OCS is taken up through plant leaves, following the same pathway as CO 2 ; in contrast to CO 2 , OCS is irreversibly destroyed in plant leaves and plants do not typically exhibit OCS emissions. Ecosystem uptake of OCS can indicate changes in stomatal opening. Here we present an empirical model to assess the potential impact of soil OCS exchange, the non-Stomatal OCS exchange Empirical Model (SOCSEM, version 0). We created biome-specific response curves characterizing soil OCS exchange and restricted the model design to require only knowledge of soil moisture and surface temperature because remote sensing observations are available for these two features. Comparing the model to field-based chamber observations reveal deviations that can be attributed to missing complexity of the ground surface (having excluded litter and plants without regulated stomata), shortwave radiation, or the soil environment. For agricultural regions with known net emissions, we use remotely-sensed surface temperature data and demonstrate that data resolution can affect anticipated fluxes. We further investigate the influence of regions with unknown soil OCS responses, for example, Arctic tundra. We compare our model to a process-based and respiration-based soil OCS exchange model that has been implemented in a land surface model. Further field study of tropical and arctic ecosystems in conjunction with studies of non-stomatal surfaces in addition to soil (e.g., bryophytes) will increase confidence in applying OCS as a regional tracer for stomatal conductance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Carbon and Water Fluxes of the Boreal Evergreen Needleleaf Forest Biome Constrained by Assimilating Ecosystem Carbonyl Sulfide Flux Observations

Gross primary production (GPP) by boreal forests is highly sensitive to environmental changes. However, GPP simulated by land surface models (LSMs) remains highly uncertain due to the lack of direct photosynthesis observations at large scales. Carbonyl sulfide (COS) has emerged as a promising proxy to improve the representation of GPP in LSMs. Because COS is absorbed by vegetation following the same diffusion pathway as CO2 during photosynthesis and not emitted back to the atmosphere, incorporating a mechanistic representation of vegetation COS uptake in LSMs allows using COS observations to refine GPP representation. Here, we perform ecosystem COS flux and GPP data assimilations to constrain the COS- and GPP-related parameters in the ORCHIDEE LSM for boreal evergreen needleleaf forests (BorENF). Assimilating ecosystem COS fluxes at Hyytiälä forest increases the simulated net ecosystem COS uptake by 14%. This increase largely results from changes in the internal conductance to COS, highlighting the need to improve the representation of COS internal diffusion and consumption. Moreover, joint assimilation of ecosystem COS flux and GPP at Hyytiälä improves the simulated latent heat flux, contrary to the GPP-only data assimilation, which fails to do so. Finally, we scaled this assimilation framework up to the boreal region and find that the joint assimilation of COS at Hyytiälä and GPP fluxes at 10 BorENF sites increases the modeled vegetation COS uptake up to 18%, but not GPP. Therefore, this study encourages the use of COS flux observations to inform GPP and latent heat flux representations in LSMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Pre-ceramic polymer-assisted nucleation and growth of copper sulfide nanoplates

Abstract Polymer-derived ceramics derived from pre-ceramic polymers (PCPs), have access to several form factors and are highly tunable systems. Tunability can be further expanded with the incorporation of functional nanoparticle fillers throughout the matrix for advanced nanocomposite polymer-derived ceramic development. However, capping ligands used in nanoparticle syntheses mix unfavorably with PCPs, giving aggregated filler material and diminished properties. To control dispersion, secondary nanoparticle processing is performed by adhering PCP-miscible caps to the surface after synthesis. This often sacrifices size control established for small nanoparticles (<10 nm). Herein, we successfully eliminate the need for extra nanoparticle processing through the development of a one-pot, copper sulfide synthesis in which a PCP assists the stable formation of nanoparticles and serves as the final graft molecule. We monitor the success of this methodology and the PCP’s role in the reaction through several characterization methods probing both the nanoparticle core and polymer graft.

Loughney, Patricia A. (ORCID:0000000199472267)↗
DOE OSTI2022

Sulfide glass solid-state electrolyte separators for Li metal batteries: using an interlayer to increase rate performance and reduce stack pressure

We report on the solubility of (Li 2 S) 60 (SiS 2 ) x (P 2 S 5 ) 40–x , (0 ≤ x ≤ 40) sulfide glass solid-state electrolytes in the 1:1 (v/v) DME:DOL solvent mixture, a popular choice for lithium metal battery liquid electrolytes. SiS 2 -rich glasses within the compositional range of (Li 2 S) 60 (SiS 2 ) x (P 2 S 5 ) 40–x (28 ≤ x ≤ 40) were found to be functionally insoluble in DME:DOL. Hybrid symmetric test cells with a thin liquid electrolyte layer (0.6 M LiTFSI + 0.4 M LiNO 3 in 1:1 (v/v) DME:DOL) at the interface between lithium metal electrodes and an insoluble (Li 2 S) 60 (SiS 2 ) 28 (P 2 S 5 ) 12 glass wafer were tested. Hybrid test cells delivered a critical current density of 3.0 mA cm –2 at 25 °C and 0.1 MPa, which is nearly double the CCD of comparable dry symmetric test cells cycled at 10× higher stack pressure.

25 ENERGY STORAGE↗
DOE OSTI2022

Highly reversible Li 2 RuO 3 cathodes in sulfide-based all solid-state lithium batteries

The practical application of high-capacity lithium-rich cathode materials in lithium-ion batteries has been largely restricted by severe side reactions with electrolytes. Herein, we report a highly stable lithium-rich Li 2 RuO 3 cathode by forming a passivating solid electrolyte interphase at the interface with a sulfide solid electrolyte such as Li 6 PS 5 Cl in all-solid-state lithium batteries (ASSLBs), which efficiently suppresses serious parasitic interfacial reactions and fast-increasing interfacial impedance normally observed in liquid electrolytes. The exceptionally high interfacial stability of the Li 2 RuO 3 /sulfide electrolyte interface contributes to a high reversible capacity of 257 mA h g –1 of Li 2 RuO 3 at 0.05C rate, and unprecedented cycling stability with 90% capacity retention after 1000 cycles at 1C rate. Iin this work, comprehensive experimental characterizations and first-principles calculations disclose that electronically insulating interfacial reaction products forming at the interface between the Li 2 RuO 3 cathode and Li 6 PS 5 Cl facilitate the formation of a stable and passivating interphase and block the continuous side reactions. Importantly, reversible oxygen redox activity of Li 2 RuO 3 is well-maintained in this configuration of ASSLBs even after 600 cycles, thus the common voltage decay of the Li-rich material is also significantly reduced. These new discoveries demonstrate the critical role of interface design for achieving prolonged cycling stability of lithium-rich cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Unraveling electrochemo-mechanical aspects of core–shell composite cathode for sulfide based all-solid-state batteries

All-solid-state lithium batteries (ASSLBs) are emerging as promising next-generation batteries for electric vehicles owing to their high energy densities and safety features. However, challenges such as inadequate material percolation and low cathode utilization often hinder their potential. This paper presents a core–shell approach to optimize the cathode active material (CAM) utilization. The resultant CAM composite showed high ionic conductivity, a highly dense microstructure with <10% porosity, and minimal stack pressure changes during electrochemical cycling. The maximum CAM utilization was achieved while effectively mitigating electrochemo-mechanical side reactions by applying a uniformly coated Li 6 PS 5 Cl solid electrolyte layer (≈500 nm) and a LiNbO 3 buffer layer (≈10 nm) onto LiNi 0.8 Mn 0.1 Co 0.1 O 2 particles (LPSCl@LNO@NMC). The engineered LPSCl@LNO@NMC composites, which incorporated a 5 wt% LPSCl coating on LNO@NMC powders, exhibited a dense microstructure that enhanced the mechanical stability at the cathode. Sulfide-based solid electrolyte (SSE)/SSE contact provided better ionic pathways within the composite and increased CAM utilization. Thus, an enhanced reversible capacity (197 mA h g -1 ) and exceptional high-rate cycling performance (86.3% capacity retention after 1000 cycles at 2C) were observed. These findings pave the way for the advancement and commercialization of high-performance ASSLBs.

25 ENERGY STORAGE↗
DOE OSTI2025

Amorphous zinc–molybdenum–sulfide chalcogel as a long-cycle, high-capacity electrode for lithium-ion batteries

The inherent limitations of intercalation-based electrodes in lithium-ion batteries have prompted the search for alternative materials with higher specific capacities and robust electrochemical stability. Sulfur-based electrodes, despite their high theoretical capacities (1672 mAh g −1 ), typically suffer from poor cycling performance. In this work, zinc molybdenum polysulfide (Zn x Mo 3 S 13 , 0.5 ≤ x), an amorphous semiconductor chalcogel, exhibits high specific capacity and excellent cycling stability. Synchrotron X-ray pair distribution function and extended X-ray absorption fine structure analyses reveal a short-range atomic structure comprising Mo–Mo, M–S (M = Mo, Zn), and S–S bonding motifs. The coordination environment of Mo and S closely resembles that of Mo 3 S 13 clusters, interconnected via S–S bridges and Zn 2+ cations. The Li/Zn x Mo 3 S 13 cell delivers an initial discharge capacity of 844 mAh g −1 at C/3, and retains 386.2 mAh g −1 after 1000 cycles with an average coulombic efficiency of 99.99%. The distribution of relaxation times analysis confirms the formation of a stable solid electrolyte interphase, which underpins the cell's long-term stability. In conclusion, this outstanding performance is attributed to the synergistic effects of the chalcogel's unique amorphous framework, semiconductive character, Zn-mediated polysulfide anchoring, and structural resilience, positioning Zn x Mo 3 S 13 chalcogel among the most durable pure metal sulfide cathodes reported for next-generation LIBs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sulfide electrolyte additive enables multi-ionic transfer pathways in alkaline iron redox

Traditional alkaline iron (Fe) batteries rely on the conversion reaction between Fe and Fe(OH) 2 but suffer from hydrogen generation upon Fe formation on charging. Fe 2+ /Fe 3+ redox is a promising anode reaction for alkaline Fe batteries, as it alleviates the formation of hydrogen gas during charging. However, achieving complete Fe 2+ /Fe 3+ redox with a one-electron transfer reaction is challenging due to the formation of electrochemically inert Fe 3 O 4 materials. Here, we demonstrate that an alkaline sulfide-containing electrolyte facilitates the reversible multi-ion transfer and transport pathways within (and beyond) the Fe 2+ /Fe 3+ redox system, including Fe(OH) 2 /Fe 3 O 4 conversion, intercalation of hydrosulfide into layered Fe(OH) 2 , and hydrogen deposition, mediated by hydroxyl ions, hydrosulfide anions, and protons, respectively. This multi-ionic charge storage mechanism delivers a compelling discharge capacity of up to 330 mA h g −1 , as determined by chronopotentiometry measurements at a current density of 0.1 A g −1 , exceeding the theoretical iron redox capacity solely relying on Fe 2+ /Fe 3+ redox (∼299 mA h g −1 ). Our study will highlight the potential of alkaline iron redox as a green anode reaction for various aqueous energy storage systems by utilizing a scalable and low-concentration hydrosulfide electrolyte additive.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bypassing sulfides: comparing the morphology and performance of solution processed Cu(In,Ga)Se 2 films prepared via two selenide molecular precursor routes

Solution-processing of thin-film photovoltaics offers an alternative to vacuum-deposition based approaches. The amine–thiol reactive solvent system has become a focal point for the solution-processing of chalcogenide species, owing to the convenience of precursor preparation and comparatively high performance of prepared devices. Selenide species prepared via the amine–thiol route typically progress through a sulfide intermediate phase, and as such are commonly afflicted with sulfur and carbon impurities along- side the presence of a carbonaceous fine-grained layer. Here, two routes of preparing films directly to a selenide phase are examined; first by the co-dissolution of selenium in an amine–thiol solution and second via the novel use of reactive alkylammonium polyselenides. Lamella are cut from these selenide precursor films and final devices, and STEM-EDX and TEM are used to characterize film morphology and secondary phases. A champion device efficiency of 11.2% is reported for the novel polyselenide route, and clear paths of improvement are identified.

36 MATERIALS SCIENCE↗