Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structure formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Airborne spectroscopy and spacecraft radiometry of Venus in the far infrared

The first spectral observations of the Venus disk in the 110 to 270 per cm spectral range are reported, made from the Kuiper Airborne Observatory in mid-March 1979, some three months following the start of the Pioneer Venus Orbiter mission. The instrumentation and its differences from earlier flight hardware is discussed. The brightness temperature was 275 K near 110/cm, dropping to 230 K near 270/cm. Radiance calculations, using temperature and cloud structure formation from the Pioneer Venus mission and including gaseous absorption by the collision-induced dipole of CO2, yield results consistently brighter than the observations. The atmospheric environment is reviewed with regard to the FIR opacity and possible particle distribution modifications are discussed. It is concluded that the most likely possibility for supplementing the FIR opacity is a population of large particles in the upper cloud with number densities less than one particle per cu cm which has remained undetected by in situ measurements.

Aumann, H. H.↗

Plasma deposition and surface modification techniques for wear resistance

The ion-assisted or plasma coating technology is discussed as it applies to the deposition of hard, wear resistant refractory compound films. Of the many sputtering and ion plating modes and configurations the reactive magnetron sputtering and the reactive triode ion plating techniques are the preferred ones to deposit wear resistant coatings for tribological applications. Both of these techniques incorporate additional means to enhance the ionization efficiency and chemical reaction to precision tailor desirable tribological characteristics. Interrelationships between film formation, structure, and ribological properties are strictly controlled by the deposition parameters and the substrate condition. The enhanced ionization contributes to the excellent adherence and coherence, reduced internal stresses and improved structural growth to form dense, cohesive, equiaxed grain structure for improved wear resistance and control.

Spalvins, T.↗

Analysis of the quality of image data acquired by the LANDSAT-4 Thematic Mapper (TM) of the Black Hills area, South Dakota

The structure, format, and quality of the LANDSAT-4 TM and MSS photographic and digital products for one scene covering the Black Hills area of South Dakota were assessed and the extent to which major resource categories can be detected and identified on various photographic products generated from a subset of TM spectral bands and from all bands of the MSS was determined. The overall spectral, spatial, and radiometric quality of the TM data was found to be excellent. Agricultural fields of variable shape, size, and orientation were detected with relative ease. The addition of the short-wave infrared band (TM5) has significantly improved the ability to detect and identify crop types on single date imagery.

Colwell, R. N.↗

An integrated software system for geometric correction of LANDSAT MSS imagery

A system for geometrically correcting LANDSAT MSS imagery includes all phases of processing, from receiving a raw computer compatible tape (CCT) to the generation of a corrected CCT (or UTM mosaic). The system comprises modules for: (1) control of the processing flow; (2) calculation of satellite ephemeris and attitude parameters, (3) generation of uncorrected files from raw CCT data; (4) creation, management and maintenance of a ground control point library; (5) determination of the image correction equations, using attitude and ephemeris parameters and existing ground control points; (6) generation of corrected LANDSAT file, using the equations determined beforehand; (7) union of LANDSAT scenes to produce and UTM mosaic; and (8) generation of output tape, in super-structure format.

Parada, N. D. J.↗

Directional Solidification of Monotectic and Hypermonotectic Aluminum-indium Alloys Under Micron-g

The objective of this program is to analyze the mechanisms involved in the composite solid structure formation obtained from a miscibility gap alloy under microgravity. The metallic system aluminum-indium was chosen for its low critical temperature, broad miscibility gap, and rather well-known thermodynamic properties. The experiment was performed aboard the Salyut-7 spacecraft. The theories of capture of particulates by an advancing front were not able to explain the observations made on SPAR and Salyut-7 experiments. A new model was developed based on the filtration theory considering the globules population: the solid/liquid interface is like a filter of negligible thickness for the globules and its efficiency is limited by a pressure barrier measured for Al-In alloys by ground based experiments. The Materials Experiment Assembly (MEA)-3 experiment was consequently adjusted to take into account the new model. The behavior of the globules in an interacting population on the solid front is, of course, an essential factor in the theory. The theory is at present being completed by results obtained by the Laboratoire d'Aerothermique of Meudon. The hydrodynamic and thermal interactions between pairs of globules placed in a temperature gradient have been calculated showing a large reduction of the Marangoni effect compared to the isolated globule. Physico-chemical properties of metallic liquid interface are currently being investigated.

Potard, C.↗

The FIRE Project

The International Satellite Cloud Climatology Project's (ISCCP) First ISCCP Regional Experiment (FIRE) project is a program to validate the cloud parameters derived by the ISCCP. The 4- to 5-year program will concentrate on clouds in the continental United States, particularly cirrus and marine stratocumulus clouds. As part of the validation process, FIRE will acquire satellite, aircraft, balloon, and surface data. These data (except for the satellite data) will be amalgamated into one common data set. Plans are to generate a standardized format structure for use in the PCDS. Data collection will begin in April 1986, but will not be available to the general scientific community until 1987 or 1988. Additional pertinent data sets already reside in the PCDS. Other qualifications of the PCDS for use in this validation program were enumerated.

Mcdougal, D.↗

The statistics of peaks of Gaussian random fields

A set of new mathematical results on the theory of Gaussian random fields is presented, and the application of such calculations in cosmology to treat questions of structure formation from small-amplitude initial density fluctuations is addressed. The point process equation is discussed, giving the general formula for the average number density of peaks. The problem of the proper conditional probability constraints appropriate to maxima are examined using a one-dimensional illustration. The average density of maxima of a general three-dimensional Gaussian field is calculated as a function of heights of the maxima, and the average density of 'upcrossing' points on density contour surfaces is computed. The number density of peaks subject to the constraint that the large-scale density field be fixed is determined and used to discuss the segregation of high peaks from the underlying mass distribution. The machinery to calculate n-point peak-peak correlation functions is determined, as are the shapes of the profiles about maxima.

Bardeen, J. M.↗

Phobos and Deimos: Satellites of Mars

The physical characteristics of Phobos and Deimos, satellites of Mars, are discussed. Phobos and Deimos are used as an example to discuss the probable internal structure of objects of this type and the structural formations on their surfaces. The history of astronomical observations of Mars is also described.

Zharkov, V. M.↗

The appearance of primeval galaxies

The appearance of protogalaxies expected by current theories of structure formation is discussed. A review of when and how galaxies form is given, and the results of two numerical simulations of inhomogeneous galaxy formation are presented. These models are used to predict the abundance of primeval galaxies in observational surveys.

Baron, E.↗

DeMAID: A Design Manager's Aide for Intelligent Decomposition user's guide

A design problem is viewed as a complex system divisible into modules. Before the design of a complex system can begin, the couplings among modules and the presence of iterative loops is determined. This is important because the design manager must know how to group the modules into subsystems and how to assign subsystems to design teams so that changes in one subsystem will have predictable effects on other subsystems. Determining these subsystems is not an easy, straightforward process and often important couplings are overlooked. Moreover, the planning task must be repeated as new information become available or as the design specifications change. The purpose of this research is to develop a knowledge-based tool called the Design Manager's Aide for Intelligent Decomposition (DeMAID) to act as an intelligent advisor for the design manager. DeMaid identifies the subsystems of a complex design problem, orders them into a well-structured format, and marks the couplings among the subsystems to facilitate the use of multilevel tools. DeMAID also provides the design manager with the capability of examining the trade-offs between sequential and parallel processing. This type of approach could lead to a substantial savings or organizing and displaying a complex problem as a sequence of subsystems easily divisible among design teams. This report serves as a User's Guide for the program.

Rogers, James L.↗

Properties of mantles on cometary nuclei

The formation, structure, and properties of dusty mantles on cometary nuclei are investigated using various theoretical arguments and experimental data. It is shown how the growth of the mantle is affected by the varying thermal conductivity and how an initial chemically undifferentiated surface layer changes into a mechanically rather weak, less than 10 to the 7th dyn /sq cm, mantle which then strengthens to reach values of the order of 10 to the 8th dyn/sq cm. Organic CHON decomposition products may lower the porosity below the expected value of about 0.5 and lead to an increase of the surface temperature. They may also further strengthen the overall bonding of the mantle.

Smoluchowski, R.↗

Cosmological velocity correlations - Observations and model predictions

By applying the present simple statistics for two-point cosmological peculiar velocity-correlation measurements to the actual data sets of the Local Supercluster spiral galaxy of Aaronson et al. (1982) and the elliptical galaxy sample of Burstein et al. (1987), as well as to the velocity field predicted by the distribution of IRAS galaxies, a coherence length of 1100-1600 km/sec is obtained. Coherence length is defined as that separation at which the correlations drop to half their zero-lag value. These results are compared with predictions from two models of large-scale structure formation: that of cold dark matter and that of baryon isocurvature proposed by Peebles (1980). N-body simulations of these models are performed to check the linear theory predictions and measure sampling fluctuations.

Gorski, Krzysztof M.↗

Non-Gaussian microwave background fluctuations from nonlinear gravitational effects

Whether the statistics of primordial fluctuations for structure formation are Gaussian or otherwise may be determined if the Cosmic Background Explorer (COBE) Satellite makes a detection of the cosmic microwave-background temperature anisotropy delta T(sub CMB)/T(sub CMB). Non-Gaussian fluctuations may be generated in the chaotic inflationary model if two scalar fields interact nonlinearly with gravity. Theoretical contour maps are calculated for the resulting Sachs-Wolfe temperature fluctuations at large angular scales (greater than 3 degrees). In the long-wavelength approximation, one can confidently determine the nonlinear evolution of quantum noise with gravity during the inflationary epoch because: (1) different spatial points are no longer in causal contact; and (2) quantum gravity corrections are typically small-- it is sufficient to model the system using classical random fields. If the potential for two scalar fields V(phi sub 1, phi sub 2) possesses a sharp feature, then non-Gaussian fluctuations may arise. An explicit model is given where cold spots in delta T(sub CMB)/T(sub CMB) maps are suppressed as compared to the Gaussian case. The fluctuations are essentially scale-invariant.

Salopek, D. S.↗

Exact hierarchical clustering in one dimension

The present adhesion model-based one-dimensional simulations of gravitational clustering have yielded bound-object catalogs applicable in tests of analytical approaches to cosmological structure formation. Attention is given to Press-Schechter (1974) type functions, as well as to their density peak-theory modifications and the two-point correlation function estimated from peak theory. The extent to which individual collapsed-object locations can be predicted by linear theory is significant only for objects of near-characteristic nonlinear mass.

Williams, B. G.↗

Implications of abundance measurements of the intracluster medium

The potential implications of future measurements of the heavy-element abundances in intracluster gas are considered in the framework of the cold-dark-matter scenario of structure formation in the early universe (Blumenthal et al., 1984). Particular attention is given to the correlation between the M(gas)/M(stellar) ratio and the gas temperature in groups and clusters of galaxies found by Jones et al. (1989) and its relationship to the efficiency of galaxy formation. Quantitative predictions for the correlation between Fe abundance and gas temperature are presented in graphs and discussed in detail.

Forman, W.↗

Non scale-invariant density perturbations from chaotic extended inflation

Chaotic inflation is analyzed in the frame of scalar-tensor theories of gravity. Fluctuations in the energy density arise from quantum fluctuations of the Brans-Dicke field and of the inflation field. The spectrum of perturbations is studied for a class of models: it is non scale-invarient and, for certain values of the parameters, it has a peak. If the peak appears at astrophysically interesting scales, it may help to reconcile the Cold Dark Matter scenario for structure formation with large scale observations.

Mollerach, Silvia↗

Cosmological texture is incompatible with Planck-scale physics

Nambu-Goldstone modes are sensitive to the effects of physics at energies comparable to the scale of spontaneous symmetry breaking. We show that as a consequence of this the global texture proposal for structure formation requires rather severe assumptions about the nature of physics at the Planck scale.

Holman, Richard↗

Anisotropies of the cosmic microwave background in nonstandard cold dark matter models

Small angular scale cosmic microwave anisotropies in flat, vacuum-dominated, cold dark matter cosmological models which fit large-scale structure observations and are consistent with a high value for the Hubble constant are reexamined. New predictions for CDM models in which the large-scale power is boosted via a high baryon content and low H(0) are presented. Both classes of models are consistent with current limits: an improvement in sensitivity by a factor of about 3 for experiments which probe angular scales between 7 arcmin and 1 deg is required, in the absence of very early reionization, to test boosted CDM models for large-scale structure formation.

Vittorio, Nicola↗