Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid moderator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Oscillatory burning of solid propellants including gas phase time lag.

An analysis has been performed for oscillatory burning of solid propellants including gas phase time lag. The gaseous flame is assumed to be premixed and laminar with a one-step overall chemical reaction. The propellant is assumed to decompose according to the Arrenhius Law, with no condensed phase reaction. With this model, strong gas phase resonance has been found in certain cases at the characteristic gas-phase frequencies, but the peaking of the acoustic admittance is in the direction favoring the damping of pressure waves. At still higher frequencies, moderate wave-amplifying ability was found. The limit of low frequency response obtained previously by Denison and Baum was recovered, and the limitations of the quasi-steady theory were investigated.

T'Ien, J. S.↗
NASA NTRS1988

Shuttle rocket booster computational fluid dynamics

Additional results and a revised and improved computer program listing from the shuttle rocket booster computational fluid dynamics formulations are presented. Numerical calculations for the flame zone of solid propellants are carried out using the Galerkin finite elements, with perturbations expanded to the zeroth, first, and second orders. The results indicate that amplification of oscillatory motions does indeed prevail in high frequency regions. For the second order system, the trend is similar to the first order system for low frequencies, but instabilities may appear at frequencies lower than those of the first order system. The most significant effect of the second order system is that the admittance is extremely oscillatory between moderately high frequency ranges.

Chung, T. J.↗
NASA NTRS1956

Low-speed cascade investigation of loaded leading-edge compressor blades

Six percent thick NACA 63-series compressor-blade sections having a loaded leading-edge A4K6 mean line have been investigated systematically in a two-dimensional porous-wall cascade over a range of Reynolds numbers from 160,000 to 385,000. Blades cambered to have isolated-airfoil lift coefficients of 0.6, 1.2, 1.8, and 2.4 were tested over the usable angle-of-attack range at inlet-air angles of 30 degrees, 45 degrees, and 60 degrees and solidities of 1.0 and 1.5. A comparison with data of NACA RM L51G31, shows that the angle-of-attack operating range is 2 degrees to 4 degrees less than the range for the uniformly loaded section; however, the wake losses near design angle of attack are slightly lower than those for the uniformly loaded section. Except for highly cambered blades at high inlet angles, the 63-(C s oA4K6)06 compressor-blade sections are capable of more efficient operation for moderate-speed subsonic compressors at design angle of attack than are the 65-(C s oa10)10 or the 65-(c s oA2I8b)10 compressor-blade sections. In contrast to the other sections, the loaded leading-edge sections are capable of operating efficiently at the lower Reynolds numbers.

Emery, James C↗
DOE OSTI2021

Self-Healing, Improved Efficiency Solid State Rechargeable Li/I 2 Based Battery

Solid state electrolytes are receiving significant interest due to the prospect of improved safety, however, addressing the incidence and consequence of internal short circuits remains an important issue. In this study, a battery based on a LiI-LiI(HPN) 2 solid state electrolyte demonstrated self-healing after internal shorting where the cells recovered and continued to cycle effectively. The functional rechargeable electrochemistry of the self-forming Li/I 2 -based battery was investigated through interfacial modification by inclusion of Li metal (at the negative interface), and/or fabricated carbon nanotube substrates at the positive interface. A cell design with lithium metal at the negative and a carbon substrate at the positive interface produced Coulombic efficiencies > 90% over 60 cycles. Finally, the beneficial effects of moderately elevated temperature were established where a 10 °C temperature increase led to ~5× lower resistance.

25 ENERGY STORAGE↗
DOE OSTI2025

Electrically Reconfigurable Liquid Metal Nanophotonic Platform for Color Display and Imaging

Dynamically tunable optical materials and device architectures are essential for future photonic technologies, yet conventional solid metals lack the intrinsic tunability required for advanced functionalities. Gallium-based liquid metals (LMs) present an appealing alternative thanks to their distinctive mechanical and optical properties; however, their practical integration in tunable photonic elements remains largely unexplored. Here, in this study, an electrochemically controlled nanophotonic platform is demonstrated that integrates a dynamically reconfigurable LM ground plane with gold nanoantenna arrays within a microfluidic system, enabling precise and reversible modulation of optical resonances across the visible to mid-infrared spectral ranges. By employing moderate operational voltages (1.5–3.0 V), real-time tuning of high-resolution structural color patterns is achieved through nanoscale control of the interfacial gap between the LM and Au nanoantennas. This innovative platform facilitates electrically programmable, high-contrast color patterns suitable for dynamic optical displays, secure anti-counterfeiting labels, and imaging applications. Additionally, this platform enables tunable mid-infrared spectral responses, which may be utilized for chemical and biological sensing applications. This versatile integrated LM-based nanophotonic platform opens new paths toward multifunctional, actively tunable/reconfigurable photonic device and system technologies.

Imaging↗
DOE OSTI2020

The Transition From Rebound to Bonding in High-Velocity Metallic Microparticle Impacts: Jetting-Associated Power-Law Divergence

A metallic microparticle impacting a metallic substrate with sufficiently high velocity will adhere, assisted by the emergence of jetting—the splash-like extrusion of solid matter at the periphery of the impact. In this work, we compare real-time observations of high-velocity single-microparticle impacts to an elastic–plastic model to develop a more thorough understanding of the transition between the regimes of rebound and bonding. We first extract an effective dynamic yield strength for copper from prior experiments impacting alumina spheres onto copper substrates. We then use this dynamic yield strength to analyze impacts of copper particles on copper substrates. We find that up to moderate impact velocities, impacts and rebound velocities follow a power-law behavior well-predicted on the basis of elastic-perfectly plastic analysis and can be captured well with a single value for the dynamic strength that subsumes many details not explicitly modeled (rate and hardening effects and adiabatic heating). However, the rebound behavior diverges from the power-law at higher impact velocities approaching bonding, where jetting sets on. This divergence is associated with additional lost kinetic energy, which goes into the ejection of the material associated with jetting and into breaking incipient bonds between the particle and substrate. These results further support and develop the idea that jetting facilitates bonding where a critical amount of bond formation is required to effect permanent particle deposition and prevent the particle from rebounding.

36 MATERIALS SCIENCE↗
NASA NTRS1995

Calibrating the broad band X-ray telescope

This paper describes the calibration of the two solid-state Si(Li) X-ray detectors and the X-ray telescopes that flew as part of Goddard Space Flight Center's Broad Band X-Ray Telescope (BBXRT) experiment on board the space shuttle Columbia in 1990 December. During the 9 day shuttle mission, BBXRT performed approximately 150 observations of 82 celestial sources. The content of the archive is summarized here. Although BBXRT had a relatively short life, it stands as a milestone in X-ray astronomy as being the first instrument to offer moderate spectral resolution over a wide bandpass (0.3-12.0 keV). Among other things, this paper discusses the effective area calibration of the instrument, the flux calibration and flux corrections for off-axis observations, the detector background, and optimal background subtraction techniques. The on-axis effective area calibration for the central detector elements was performed using data from the Crab Nebula, while other carefully selected targets were used for calibration of the outer detector elements. The remaining systematic uncertainties in the effective area calibration for point sources observed both on and off axis are generally less than 5%-10%. The energy scale is known to better than 0.5% at 6.0 keV for both detectors. The results presented here have an impact on the calibration of other medium resolution X-ray experiments such as the CCDs on board ASCA (Astro-D) as well as the Advanced X-Ray Astrophysics Facility detectors.

Weaver, K. A.↗
DOE OSTI2022

On the Effects of Aliovalent Substitutions in Thermoelectric Zintl Pnictides. Varied Polyanionic Dimensionality and Complex Structural Transformations–The Case of Sr 3 ZnP 3 vs Sr 3 Al x Zn 1– x P 3

The structures and the transport properties of a novel family of Zintl phosphides and arsenides with the formula AE 3 ZnPn 3 and the solid solutions AE 3 Al x Zn 1–x Pn 3 , AE 3 ZnAs y P 1–y (AE = Sr, Eu; Pn = P, As) are reported. Crystals of nine new phases have been obtained via Pb-flux reactions and used for structural work by means of single-crystal X-ray diffraction methods. The derived orthorhombic structure is without a direct analog, and features unusual structural units, where the Zn atoms are in both distorted tetrahedral and trigonal-planar coordination of pnictogens. Electronic structure calculations reveal moderately wide bandgaps for Sr 3 ZnP 3 and Sr 3 ZnAs 3 , on the order of 0.70 and 0.63 eV, respectively. Electrical transport measurements above room temperature indicate relatively high resistivity values above 500 K (ρ ≈ 4.8 Ω cm and above), but some of the samples exhibit very high Seebeck coefficients, as large as 300 μV/K at 560 K for Sr 3 ZnAs 3 . Aliovalent substitutions in AE 3 ZnPn 3 , achieved by the partial replacement of Zn 2+ with Al 3+ cations promote occupational and positional disorder, which causes structural transformation towards the disordered variant of the Sr 5 Al 2 Sb 6 structure type. Such substitutions also change the dimensionality of the polyanionic sub-lattice in the resulting quaternary AE 3 Al x Zn 1–x Pn 3 phases. Furthermore, preliminary transport property data on the latter reveal nine times lower electrical resistivity (ρ 500 ≈ 0.5 Ω cm) together with a significantly enhanced Seebeck coefficient, αmax ≈ 430 μV/K at 560 K.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Improvements in solid state radiographic converter screens.

Description of two different kinds of solid-state radiographic converter screens which have been developed. After briefly reviewing the working principles of the solid-state image converter - a sandwich type structure consisting of a photoconductive layer and an electroluminescent layer with a semiconductive layer and a black layer between them, two different kinds of radiographic converter screens are described - a radiographic amplifier screen that can be used as a substitute for the fluoroscopic screen, and a radiographic storage screen that can be used instead of radiographic films. The construction of both kinds of converters is fundamentally the same, the only difference being in the sensing photoconductive material. The radiographic amplifier screen has a moderately fast response, while the radiographic storage screen displays the image long after the irradiation is stopped.

Szepesi, Z.↗
DOE OSTI2022

Odd-viscosity-induced passivation of Moffatt vortices

Odd viscosity is associated with a number of striking physical phenomena: a disk rotating in a viscous liquid experiences a normal compressive or tensile stress depending on its sense of rotation; chiral active matter interfacial deformations level off in a manner akin to surface tension; and unstable thermocapillary films become stabilized. In this article we show that odd viscosity decreases the size and intensity of Moffatt vortices in a corner formed by a solid substrate and a free interface. The effect is present because odd viscosity creates a normal-stress-induced shear stress at the liquid–gas interface. The new shear stress is out of phase and oppositely directed with respect to the interfacial liquid velocity. It squeezes the vortices and damps their rotation. As a consequence, Moffatt vortices can now be observed with greater facility in an experiment. Odd viscosity also increases the range of corner angles over which Moffatt vortices can be observed, and, in general, it shows a tendency to moderate singular behaviour.

Mechanics↗
DOE OSTI2024

Preparation of Neptunyl and Plutonyl Acetates To Access Nonaqueous Transuranium Coordination Chemistry

Uranyl diacetate dihydrate is a useful reagent for the preparation of uranyl (UO 2 2+ ) coordination complexes, as it is a well-defined stoichiometric compound featuring moderately basic acetates that can facilitate protonolysis reactivity, unlike other anions commonly used in synthetic actinide chemistry such as halides or nitrate. Despite these attractive features, analogous neptunium (Np) and plutonium (Pu) compounds are unknown to date. Here, in this study, a modular synthetic route is reported for accessing stoichiometric neptunyl(VI) and plutonyl(VI) diacetate compounds that can serve as starting materials for transuranic coordination chemistry. The new NpO 2 2+ and PuO 2 2+ complexes, as well as a corresponding molecular UO 2 2+ complex, are isomorphous in the solid state, and in solution show similar solubility properties that facilitate their use in synthesis. In both solid and solution state, the +VI oxidation state (O.S.) is maintained, as demonstrated by vibrational and optical spectroscopy, confirming that acetate anions stabilize the oxidizing, high-valent +VI states of Np and Pu as they do for the more stable U(VI). All three acetate salts readily react with a model diprotic ligand, affording incorporation of U(VI), Np(VI), and Pu(VI) cores into molecular coordination compounds that occurs concomitantly with elimination of acetic acid; the new complexes are high-valent, yet overall charge neutral, facilitating entry into nonaqueous chemistry by rational synthesis. Computational studies reveal that the dianionic ligand framework assists in stabilizing the +VI O.S. via donation to the 5f shells of the actinides, highlighting the potential usefulness of protonolysis reactivity toward preparation of stabilized high-valent transuranic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Rare Earth Garnet Selective Emitter

Thin film Ho-YAG and Er-YAG emitters with a platinum substrate exhibit high spectral emittance in the emission band (epsilon(sub lambda) approx. = 0.75, sup 4)|(sub 15/2) - (sup 4)|(sub 13/2),for Er-YAG and epsilon(sub lambda) approx. = 0.65, (sup 5)|(sub 7) - (sup 5)|(sub 8) for Ho-YAG) at 1500 K. In addition, low out-of-band spectral emittance, epsilon(sub lambda) less than 0.2, suggest these materials would be excellent candidates for high efficiency selective emitters in thermophotovoltaic (TPV) systems operating at moderate temperatures (1200-1500 K). Spectral emittance measurements of the thin films were made (1.2 less than lambda less than 3.0 microns) and compared to the theoretical emittances calculated using measured values of the spectral extinction coefficient. In this paper we present the results for a new class of rare earth ion selective emitters. These emitters are thin sections (less than 1 mm) of yttrium aluminum garnet (YAG) single crystal with a rare earth substitutional impurity. Selective emitters in the near IR are of special interest for thermophotovoltaic (TPV) energy conversion. The most promising solid selective emitters for use in a TPV system are rare earth oxides. Early spectral emittance work on rare earth oxides showed strong emission bands in the infrared (0.9 - 3 microns). However, the emittance outside the emission band was also significant and the efficiency of these emitters was low. Recent improvements in efficiency have been made with emitters fabricated from fine (5 - 10 microns) rare earth oxide fibers similar to the Welsbach mantle used in gas lanterns. However, the rare earth garnet emitters are more rugged than the mantle type emitters. A thin film selective emitter on a low emissivity substrate such as gold, platinum etc., is rugged and easily adapted to a wide variety of thermal sources. The garnet structure and its many subgroups have been successfully used as hosts for rare earth ions, introduced as substitutional impurities, in the development of solid state laser crystals. Doping, dependent on the particular ion and crystal structure, may be as high as 100 at. % (complete substitution of yttrium ion with the rare earth ion). These materials have high melting points, 1940 C for YAG (Yttrium Aluminum Garnet), and low emissivity in the near infrared making them excellent candidates for a thin film selective emitter. As previously stated, the spectral emittance of a rare earth emitter is characterized by one or more well defined emission bands. Outside the emission band the emittance(absorptance) is much lower. Therefore, it is expected that emission outside the band for a thin film selective emitter will be dominated by the emitter substrate. For an efficient emitter (power in the emission band/total emitted power) the substrate must have low emittance, epsilon(sub S). This paper presents normal spectral emittance, epsilon(sub lambda), measurements of holmium(Ho) and erbium (Er) doped YAG thin film selective emitters at (1500 K), and compares those results with the theoretical spectral emittance.

Lowe, Roland A.↗
NASA NTRS1968

Analytical and experimental studies of the steady state combustion mechanism of solid propellants

Our present state of understanding of the steady-state combustion mechanisms of solid propellants is reviewed. Attention is focused principally on heterogeneous propellants. Both experimental and theoretical work is discussed. The recent advances considered include studies of linear pyrolysis of propellant constituents, deflagration of exothermic oxidizers, combustion of oxidizer spheres in gaseous fuels, porous-bed combustion, reactions between gaseous fuel and gaseous oxidizer components, metal combustion, propellant strand burning, rocket motor combustion and microcinematographic experimentation. A theoretical analysis of a model of homogeneous propellant combustion is outlined in detail, with special emphasis placed on surface gasification laws and on flammability limits in nonadiabatic systems. Low pressure, moderate pressure, plateau and high pressure domains of combustion are identified for ammonium perchlorate composite propellants. It is concluded that a better foundation for investigating composite propellant combustion properties is available for ammonium perchlorate than for any other oxidizer. Avenues for potentially fruitful future research are recommended.

M Barrère↗
NASA NTRS1995

The average X-ray/gamma-ray spectra of Seyfert galaxies from Ginga and OSSE and the origin of the cosmic X-ray background

We have obtained the first average 2-500 keV spectra of Seyfert galaxies, using the data from Ginga and Compton Gamma-Ray Observatory's (CGRO) Oriented Scintillation Spectrometer Experiment (OSSE). Our sample contains three classes of objects with markedly different spectra: radio-quiet Seyfert 1's and 2's, and radio-loud Seyfert 1's. The average radio-quiet Seyfert 1 spectrum is well-fitted by a power law continuum with the energy spectral index alpha approximately equals 0.9, a Compton reflection component corresponding to a approximately 2 pi covering solid angle, and ionized absorption. There is a high-energy cutoff in the incident power law continuum: the e-folding energy is E(sub c) approximately equals 0.6(sup +0.8 sub -0.3) MeV. The simplest model that describes this spectrum is Comptonization in a relativistic optically-thin thermal corona above the surface of an accretion disk. Radio-quiet Seyfert 2's show strong netural absorption, and there is an indication that their X-ray power laws are intrinsically harder. Finally, the radio-loud Seyfert spectrum has alpha approximately equals 0.7, moderate neutral absorption E(sub C) = 0.4(sup +0.7 sub -0.2) MeV, and no or little Compton reflection. This is incompatible with the radio-quiet Seyfert 1 spectrum, and probably indicating that the X-rays are beamed away from the accretion disk in these objects. The average spectra of Seyferts integrated over redshift with a power-law evolution can explain the hard X-ray spectrum of the cosmic background.

Zdziarski, Andrzej A.↗
DOE OSTI2025

Insights into the Complexation of Actinides by Diethylenetriaminepentaacetic Acid from Characterization of the Americium(III) Complex

Diethylenetriaminepentaacetic acid (DTPA) is a frequently used chelator in the nuclear and medical industries, especially for the complexation of trivalent actinides. However, structural data on these complexes in the solid-state have long remained elusive. Herein, a detailed structural analysis of the presented crystal structures of [C(NH 2 ) 3 ] 4 [Nd(DTPA)] 2 · n H 2 O and [C(NH 2 ) 3 ] 4 [Am(DTPA)] 2 · n H 2 O, where [C(NH 2 ) 3 ] + is guanidinium, details the subtle differences in the Lewis acidity between a lanthanide/actinide pair of similar ionic sizes. Contractions in nitrogen–metal bond lengths between neodymium(III) and americium(III) were observed, while the metal–oxygen bonds remained relatively consistent, highlighting the marginal favorability for actinide complexation over the lanthanides with moderately soft N-donors. Spectroscopic analysis shows significant splitting of many transitions and relatively strong electronic interactions with traditionally low-intensity transitions in the americium complex, as is demonstrated in the 7 F 0 → 7 F 5 transitions. Pressure-induced spectroscopic analysis showed surprisingly little effect on the americium complex, with 5 f →5 f transitions either not shifting or marginally shifting from 2 to 3 nm at 11.93 ± 0.06 GPa─atypical of a soft, N-donor americium complex under pressure. Finally, large voids occupied by water molecules in between the complexes within the crystal structure may be responsible for the lack of pressure response in the 5 f →5 f transitions.

absorption spectroscopy↗
DOE OSTI2024

Statistical Relations among Solid Precipitation, Atmospheric Moisture and Cloud Parameters in the Arctic

Observations collected during cold-season precipitation periods at Utquagvik, Alaska and at the multidisciplinary drifting observatory for the study of Arctic climate (MOSAiC) are used to statistically analyze the relations among the atmospheric water cycle parameters including the columnar supercooled liquid and ice amounts (expressed as liquid-water and ice-water paths, i.e., LWP and IWP), the integrated water vapor (IWV) and the near-surface snowfall rate. Data come from radar and radiometer-based retrievals and from optical precipitation sensors. While the correlation between snowfall rate and LWP is rather weak, correlation coefficients between radar-derived snowfall rate and IWP are high (~0.8), which is explained, in part, by the generally low LWP/IWP ratios during significant precipitation. Correlation coefficients between snowfall rate and IWV are moderate (~0.45). Correlations are generally weaker if snowfall is estimated by optical sensors, which is, in part, due to blowing snow. Correlation coefficients between near-surface temperature and snowfall rates are low (r < 0.3). The results from the Alaska and MOSAiC sites are generally similar. These results are not very sensitive to the amount of time averaging (e.g., 15 min averaging versus daily averages). Observationally based relations among the water cycle parameters are informative about atmospheric moisture conversion processes and can be used for model evaluations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The microscopic mechanism of bulk melting of ice

We study the initial stages of homogeneous melting of a hexagonal ice crystal at coexistence and at moderate superheating. Our trajectory-based computer simulation approach provides a comprehensive picture of the events that lead to melting, from the initial accumulation of 5+7 defects, via the formation of L-D and interstitial-vacancy pairs, to the formation of a liquid nucleus. Of the different types of defects that we observe to be involved in melting, a particular kind of 5+7 type defect (type 5) plays a prominent role as it often forms prior to the formation of the initial liquid nucleus and close to the site where the nucleus forms. Hence, like other solids, ice homogeneously melts via the prior accumulation of defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗