Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulator study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A simulation study exploring the effects of sensor spatial resolution on estimates of cloud cover from satellites.

Investigation of the effects of sensor spatial resolution on estimating the amount of clouds covering the earth by simulating various cloud distributions and sizes, and measuring the known cloud amount with resolution of different sizes using a cloud-no cloud threshold technique often applied in automatic data processing. Cloud amount statistics have been tabulated for a three-orders-of-magnitude range in the ratio (R) of areal cloud size to areal resolution size for seven cloud amounts between 6 and 90%. Three different cloud patterns were used. These were 1) a regularly spaced pattern of homogeneous dots arranged in rows and columns (to simulate cloud streets), 2) a randomly spaced pattern of the same dots (to simulate randomly oriented cumulus clouds), and 3) a heterogeneous cloud size distribution irregularly spaced (to simulate a view of different cloud types and sizes). Two cloud amount estimation techniques were tested. Cloud amounts of 100% (method 1) and 50% (method 2) were assigned to partially filled resolution elements. Using criteria applicable to some studies carried out in the past, it is shown that cloud amount estimations can be in error by as much as 86 and 38%, respectively, for the two methods. Nomograms have been developed which subtantially improve the estimate of the true cloud cover for R less than 100, provided that R can be determined.

Shenk, W. E.↗

In-flight simulation studies at the NASA Dryden Flight Research Facility

Since the late 1950's, the National Aeronautics and Space Administration's Dryden Flight Research Facility has found in-flight simulation to be an invaluable tool. In-flight simulation has been used to address a wide variety of flying qualities questions, including low-lift-to-drag ratio approach characteristics for vehicles like the X-15, the lifting bodies, and the Space Shuttle; the effects of time delays on controllability of aircraft with digital flight-control systems, the causes and cures of pilot-induced oscillation in a variety of aircraft, and flight-control systems for such diverse aircraft as the X-15 and the X-29. In-flight simulation has also been used to anticipate problems and to avoid them and to solve problems once they appear. Presented here is an account of the in-flight simulation at the Dryden Flight Research Facility and some discussion. An extensive bibliography is included.

Shafer, Mary F.↗

In-flight simulation studies at the NASA Dryden Flight Research Facility

Since the late 1950's the National Aeronautics and Space Administration's Dryden Flight Research Facility has found in-flight simulation to be an invaluable tool. In-flight simulation has been used to address a wide variety of flying qualities questions, including low lift-to-drag ratio approach characteristics for vehicles like the X-15, the lifting bodies, and the space shuttle; the effects of time delays on controllability of aircraft with digital flight control systems; the causes and cures of pilot-induced oscillation in a variety of aircraft; and flight control systems for such diverse aircraft as the X-15 and the X-29. In-flight simulation has also been used to anticipate problems, avoid them, and solve problems once they appear. This paper presents an account of the in-flight simulation at the Dryden Flight Research Facility and some discussion. An extensive bibliography is included.

Shafer, Mary F.↗

Simulator study of conventional general aviation instrument displays in path-following tasks with emphasis on pilot-induced oscillations

A study of the use of conventional general aviation instruments by general aviation pilots in a six degree of freedom, fixed base simulator was conducted. The tasks performed were tracking a VOR radial and making an ILS approach to landing. A special feature of the tests was that the sensitivity of the displacement indicating instruments (the RMI, CDI, and HSI) was kept constant at values corresponding to 5 n. mi. and 1.25 n. mi. from the station. Both statistical and pilot model analyses of the data were made. The results show that performance in path following improved with increases in display sensitivity up to the highest sensitivity tested. At this maximum test sensitivity, which corresponds to the sensitivity existing at 1.25 n. mi. for the ILS glide slope transmitter, tracking accuracy was no better than it was at 5 n. mi. from the station and the pilot aircraft system exhibited a marked reduction in damping. In some cases, a pilot induced, long period unstable oscillation occurred.

Adams, J. J.↗

Simulation study of Type 2 counterstreaming electrons along auroral field lines

The production of counterstreaming electrons associated with parallel fields along auroral field lines is examined through the use of computer simulation. A 2 1/2-dimensional (two spatial and three velocity dimensions) electrostatic particle algorithm and auroral boundary conditions are used to set up a self-consistent V potential structure. The simulation produces signatures of counterstreaming electrons resembling those observed by the Dynamics Explorer 1 satellite. The main signatures are as follows: (1) the phase space contours of the electron distribution function are elongated along the V-parallel axis, and (2) the energy of electrons streaming in the upward direction is comparable to the energy of the accelerated electron beam. The simulation indicates that a portion of the accelerated electron beam is trapped by large amplitude electrostatic waves produced through the two-stream instability. Strong wave-particle interactions then thermalize the trapped electrons to produce suprathermal electrons streaming in the direction opposite to that of the accelerated electron beam. These results suggest a possible mechanism of producing counterstreaming electron fluxes through nonlinear processes of the two-stream instability.

Wagner, J. S.↗

Simulator study of the effect of control-system time delays on the occurrence of pilot-induced oscillations and on pilot tracking performance with a space-shuttle-orbiter configuration

Using a six degree-of-freedom motion-base simulator, the effect of control-system time delays on the occurrence of pilot-induced oscillations (PIO's) on the vehicle handling qualities and on pilot tracking performance for a landing-approach configuration of the Space Shuttle orbiter was studied. A linearized math model was employed which represented a 300-knot orbiter with almost all time delays removed. Additional time delays were then inserted following the pilot's hand-controller signals. Only pitch and roll commands were used for vehicle control. The simulation employed an air to air tracking task as a means of emphasizing PIO tendencies. Two astronauts, two research pilots, and one simulation engineer served as test subjects. Results showed that PIO's occurred when the amount of added time delay approximated that existing for the orbiter configuration flown in the approach and landing tests. Increasing the amount of delay increased PIO occurrences and resulted in degraded tracking performance. Decreasing the amount of time delay eliminated the PIO's.

Riley, D. R.↗

Fixed-base simulator study of the effect of time delays in visual cues on pilot tracking performance

Factors were examined which determine the amount of time delay acceptable in the visual feedback loop in flight simulators. Acceptable time delays are defined as delays which significantly affect neither the results nor the manner in which the subject 'flies' the simulator. The subject tracked a target aircraft as it oscillated sinusoidally in a vertical plane only. The pursuing aircraft was permitted five degrees of freedom. Time delays of from 0.047 to 0.297 second were inserted in the visual feedback loop. A side task was employed to maintain the workload constant and to insure that the pilot was fully occupied during the experiment. Tracking results were obtained for 17 aircraft configurations having different longitudinal short-period characteristics. Results show a positive correlation between improved handling qualities and a longer acceptable time delay.

Queijo, M. J.↗

A Full Mission Simulator Study of Aircrew Performances: the Measurement of Crew Coordination and Decisionmaking Factors and Their Relationships to Flight Task Performances

Sixteen three man crews flew a full mission scenario in an airline flight simulator. A high level of verbal interaction during instances of critical decision making was located. Each crew flew the scenario only once, without prior knowledge of the scenario problem. Following a simulator run and in accord with formal instructions, each of the three crew members independently viewed and commented on a videotape of their performance. Two check pilot observers rated pilot performance across all crews and, following each run, also commented on the video tape of the crew's performance. A linguistic analysis of voice transcript is made to provide assessment of crew coordination and decision making qualities. Measures of crew coordination and decision making factors are correlated with flight task performance measures.

Murphy, M. R.↗

Ground Simulator Studies of a Nonlinear Linkage in a Power Control System

An investigation was made to determine the characteristics of a nonlinear linkage installed in a power control system incorporated in a ground simulator. The nonlinear linkage provided for increased control-stick motion for relatively small simulator response at control motions near neutral. The quality of the control system was rated on the ease and precision with which various tracking tasks were performed by the pilots who operated the simulator. The results obtained with the nonlinear linkage installed in the control system were compared with those obtained by using the normal linear control system. Several combinations of nonlinearity of the linkage were tested for various dynamic characteristics of the simulator. It was found that the pilots were able to track almost as well with the nonlinear linkage installed as with the normal system. All of the pilots were of the opinion, however, that the nonlinearity was an undesirable feature in the control system because of the apparent lack of simulator response through the neutral range of the linkage where relatively large stick deflections could be made with very little simulator motion. The results showed that increased lag between the target and chair position, higher stick-force levels, and uneven stick forces due to the dynamics of the linkage were general characteristics of all the nonlinear linkage conditions tested. It was also found that for cases of low simulator damping, rapid control motions caused considerably higher overshoots when the nonlinear linkage was installed than were obtained for the normal linear control system. These characteristics were considered to be sufficiently undesirable to out-weigh the advantages to be gained from the use of a nonlinear linkage in the control system of an airplane.

Assadourian, Arthur↗

Vibration simulator studies for the development of passenger ride comfort criteria

A test program to determine the total discomfort associated with vehicle vibration is described. The program utilizes a three-degree-of-freedom vibration simulator to determine the effects of multifrequency and multiaxis vibration inputs. The approach to multifrequency vibration includes a separate consideration of the discomfort associated with each frequency component or band of the total spectrum and a subsequent empirical weighting of the discomfort components of these frequency bands when in various random combinations. The results are in the form of equal discomfort curves that specify the discomfort associated with discrete frequencies between 1 and 30 Hz and different acceleration levels. These results provide detailed information of the human discomfort response to increases in acceleration level for each frequency investigated. More importantly, the results provide a method for adding the discomfort associated with separate frequencies to give a total typification of the discomfort of a random spectrum of vibration.

Dempsey, T. K.↗

Simulation studies of the influence of sea-surface temperature anomalies on the Sahelian circulation and rainfall

An investigation was conducted to find out if sea surface temperature (SST) - African rainfall relationships could be simulated in a global climate model (GCM). If indeed that were possible, researchers generated useful diagnostics that can enable them to understand the physical mechanisms which lead to rainfall fluctuations over Africa in response to sea surface temperature anomalies over global ocean.

Sud, Y. C.↗

Steepening of parallel propagating hydromagnetic waves into magnetic pulsations - A simulation study

The steepening mechanism of parallel propagating low-frequency MHD-like waves observed upstream of the earth's quasi-parallel bow shock has been investigated by means of electromagnetic hybrid simulations. It is shown that an ion beam through the resonant electromagnetic ion/ion instability excites large-amplitude waves, which consequently pitch angle scatter, decelerate, and eventually magnetically trap beam ions in regions where the wave amplitudes are largest. As a result, the beam ions become bunched in both space and gyrophase. As these higher-density, nongyrotropic beam segments are formed, the hydromagnetic waves rapidly steepen, resulting in magnetic pulsations, with properties generally in agreement with observations. This steepening process operates on the scale of the linear growth time of the resonant ion/ion instability. Many of the pulsations generated by this mechanism are left-hand polarized in the spacecraft frame.

Akimoto, K.↗

Ground Simulator Studies of the Effects of Valve Friction, Stick Friction, Flexibility, and Backwash on Power Control System Quality

Report presents results of tests made on a power control system by means of a ground simulator to determine the effects of various combinations of valve friction and stick friction on the ability of the pilot to control the system. Various friction conditions were simulated with a rigid control system, a flexible system, and a rigid system having some backlash. For the tests, the period and damping of the simulated airplane were held constant.

Brown, B Porter↗

Simulation studies of plasma waves in the electron foreshock - The generation of downshifted oscillations

The generation of waves with frequencies downshifted from the plasma frequency, as observed in the electron foreshock, is analyzed by particle simulation. Wave excitation differs fundamentally from the familiar excitation of the plasma eigenmodes by a gentle bump-on-tail electron distribution. Beam modes are destabilized by resonant interaction with bulk electrons, provided the beam velocity spread is very small. These modes are stabilized, starting with the higher frequencies, as the beam is broadened and slowed down by the interaction with the wave spectrum. Initially a very cold beam is also capable of exciting frequencies considerably above the plasma frequency, but such oscillations are quickly stabilized. Low-frequency modes persist for a long time, until the bump in the electron distribution is completely 'ironed' out. This diffusion process also is quite different from the familiar case of well-separated beam and bulk electrons. A quantitative analysis of these processes is carried out.

Dum, C. T.↗

An MHD simulation study of the poloidal mode field line resonance in the Earth's dipole magnetosphere

The poloidal mode field line resonance in the Earth's dipole magnetic field is investigated using cold plasma ideal MHD simulations in dipole geometry. In order to excite the poloidal mode resonance, we use either an initial or a continuous velocity perturbation to drive the system. The perturbation is localized at magnetic shell L = 7 with plasma flow in the radial direction (electric field component in the azimuthal direction). It is found that with the initial perturbation alone, no polodial mode resonance can be obtained and the initially localized perturbation spreads out across all magnetic L shells. With the continuous perturbation, oscillating near the poloidal resonance frequency, a global-scale poloidal cavity mode can be obtained. For the first time, a localized guided poloidal mode resonance is obtained when a radial component of electric field is added to the initial perturbation such that the curl of the electric field is everywhere perpendicular to the background dipole magnetic field. During the localized poloidal resonance, plasma vortices parallel/antiparallel to the background dipole magnetic field B(sub 0). This circular flow, elongated radially, results in twisting of magnetic field flux tubes, which, in turn, leads to the slowdown of the circular plasma flow and reversal of the plasma vortices. The energy associated with the localized poloidal resonance is conserved as it shifts back and forth between the oscillating plasma vortices and the alternately twisted magnetic flux tubes. In the simulations the eigenfunctions associated with the localized poloidal resonance are grid-scale singular functions. This result indicates that ideal MHD is inadequate to describe the underlying problem and nonideal MHD effects are needed for mode broadening.

Ding, D. Q.↗

A Piloted Simulation Study of Advanced Controls and Displays for General Aviation Airplanes

A decoupled, fly-by-wire control system combined with a pictorial head-up display has been developed and evaluated on a piloted simulator. The test subjects used in the evaluation were primarily non-pilots who were given no training or practice before the data runs. Despite their lack of experience and training, all of the test subjects were able to complete a complex piloting task on their very first run. The piloting task was performed in reduced visibility conditions and consisted of a continuous series of common maneuvers beginning with a takeoff and ending with a landing. Severe upsets from turbulence and emergency situations such as engine failure were not simulated. Quantitative qualitative data are presented to illustrate the large improvements in subject performance when using the advanced controls and displays compared to the conventional ones.

Eric C. Stewart↗

Simulator study of the effect of visual-motion time delays on pilot tracking performance with an audio side task

The effect of time delay was determined in the visual and motion cues in a flight simulator on pilot performance in tracking a target aircraft that was oscillating sinusoidally in altitude only. An audio side task was used to assure the subject was fully occupied at all times. The results indicate that, within the test grid employed, about the same acceptable time delay (250 msec) was obtained for a single aircraft (fighter type) by each of two subjects for both fixed-base and motion-base conditions. Acceptable time delay is defined as the largest amount of delay that can be inserted simultaneously into the visual and motion cues before performance degradation occurs. A statistical analysis of the data was made to establish this value of time delay. Audio side task provided quantitative data that documented the subject's work level.

Riley, D. R.↗