Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sharp features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Sharp and Tunable Crystal/Fano-Type Resonances Enabled by Out-of-Plane Dipolar Coupling in Plasmonic Nanopatch Arrays

Tuning resonance lineshapes of plasmonic structures is essential to create customized media with compelling optical properties for optimized light–matter interactions. The diversity of available metals and the variety of design architectures provide a rich portfolio for statically controlling the resonance lineshape. However, dynamic tuning of resonance attributes (e.g., the resonance wavelength and linewidth) are yet to be more expanded, especially when a narrow resonance linewidth is on demand. Here, using a plasmonic nanopatch array, sharp plasmonic crystal (PC) resonances are demonstrated across a wide spectral range of 230 nm, with full-width at half-maximum of only ≈6 nm. The combination of angle-resolved ellipsometry and full-wave simulations shows that diffractive coupling of out-of-plane electric dipoles is the principal contributor in the formation of such sharp PC resonances. In addition, the designed nanopatch PC supports a plasmonic Fabry–Pérot-like resonance that can be interfered with the PC resonance to generate complex Fano-type lineshapes. Finally, the coexistence of tunable resonance features renders the designed structures as a rich platform for applications seeking enhanced light–matter interactions and optical signal processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Emission from quantum-dot high-β microcavities: transition from spontaneous emission to lasing and the effects of superradiant emitter coupling

Measured and calculated results are presented for the emission properties of a new class of emitters operating in the cavity quantum electrodynamics regime. The structures are based on high-finesse GaAs/AlAs micropillar cavities, each with an active medium consisting of a layer of InGaAs quantum dots (QDs) and the distinguishing feature of having a substantial fraction of spontaneous emission channeled into one cavity mode (high β-factor). This paper demonstrates that the usual criterion for lasing with a conventional (low β-factor) cavity, that is, a sharp non-linearity in the input–output curve accompanied by noticeable linewidth narrowing, has to be reinforced by the equal-time second-order photon autocorrelation function to confirm lasing. The article also shows that the equal-time second-order photon autocorrelation function is useful for recognizing superradiance, a manifestation of the correlations possible in high-β microcavities operating with QDs. In terms of consolidating the collected data and identifying the physics underlying laser action, both theory and experiment suggest a sole dependence on intracavity photon number. Evidence for this assertion comes from all our measured and calculated data on emission coherence and fluctuation, for devices ranging from light-emitting diodes (LEDs) and cavity-enhanced LEDs to lasers, lying on the same two curves: one for linewidth narrowing versus intracavity photon number and the other for g( 2 )(0) versus intracavity photon number.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Optical conductivity of layered topological semimetal TaNiTe 5

Here, we present an infrared spectroscopy study of the layered topological semimetal TaNiTe 5 , a material with a quasi-one-dimensional structure and strong in-plane anisotropy. Despite its structural features, infrared reflectivity and electronic transport measurements along the 𝑎 and 𝑐 crystallographic axes show metallic behavior without evidence of reduced dimensionality. Optical conductivity reveals an anisotropic but conventional metallic response with low scattering rates and a single sharp infrared-active phonon mode at 396cm −1 ⁢(49meV). Ab initio calculations closely match the experimental optical data and confirm a three-dimensional electronic structure. Our results demonstrate that TaNiTe 5 behaves as a three-dimensional anisotropic semimetal in its electronic and optical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Ferromagnetic ordered phase of quantum spin ice system Yb{sub 2}Ti{sub 2}O{sub 7} under [001] magnetic field

Measurements of magnetization (M) and specific heat (C) under a [001] magnetic field were carried out on a single crystal of a quantum spin ice system Yb{sub 2}Ti{sub 2}O{sub 7} in order to investigate a feature of the transition occurred at T{sub C} ∼ 0.2 K. As a result of applying the magnetic field μ{sub 0}H < 0.1 T, the C/T − T curve structure and transition temperature barely changed. On the other hand, applying the more than 0.1 T magnetic field, the C/T − T curve structure drastically change from sharp peak structure to broad peak one, and the broad peak temperature of C/T − T curves linearly increases with increasing magnetic field (H). In the magnetic field μ{sub 0}H < 0.1 T, the magnetization drastically increases around T{sub C} ∼ 0.2 K with decreasing T, and a thermal hysteresis loop of the M − T curve is observed. With increasing H, the thermal hysteresis loop of the M − T curves disappears above μ{sub 0}H{sub C} = 0.1 T. We can understand these results, where Yb{sub 2}Ti{sub 2}O{sub 7} exhibits a first-order ferromagnetic transition associated with the latent heat corresponding to the energy of μ{sub 0}H{sub C} = 0.1 T. Basis of the H − T phase diagram along [001] magnetic field, the feature of the transition occurred at T{sub C} ∼ 0.2 K in quantum spin ice system Yb{sub 2}Ti{sub 2}O{sub 7} is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Printability and Overall Cooling Performance of Additively Manufactured Holes With Inlet and Exit Rounding

Abstract To improve cooling effectiveness of gas turbine hardware, various film cooling hole shapes have previously been researched. Unique design modifications have recently been made possible through the design freedom allotted by additive manufacturing (AM). As one example, creating a rounded inlet for a film-cooling hole can mitigate separation at the inlet. This study explores various geometric features by exploiting the uses of additive manufacturing for shaped film cooling holes at engine scale. Both printability and cooling performance were evaluated. Resulting from this study, additively manufactured holes with hole inlet and exit rounding were printed with some variations from the design intent (DI). The largest deviations from the design intent occurred from dross roughness features located on the leeward side of the hole inlet. The measured overall effectiveness indicated that an as-built inlet fillet decreased in-hole convection as well as decreased jet mixing compared to the as-built sharp inlet. Including an exit fillet, which prevented an overbuilt diffuser exit, was also found to decrease jet mixing. A particular insight gained from this study is the importance of the convective cooling within the hole to the overall cooling performance. In-hole roughness, which is a result of additive manufacturing, increased convective cooling within the holes but also increased jet mixing as the coolant exited the hole. The increased jet mixing caused low overall effectiveness downstream of injection.

Engineering↗
DOE OSTI2015

Investigations on Ni-Co-Mn-Sn thin films: Effect of substrate temperature and Ar gas pressure on the martensitic transformations and exchange bias properties

We report the effect of substrate temperature (T{sub S}) and Ar gas pressure (P{sub D}) on the martensitic transformations, magnetic and exchange bias (EB) properties in Heusler type Ni-Co-Mn-Sn epitaxial thin films. Martensitic transformation temperatures and EB fields at 5 K were found to increase with increasing T{sub S}. The observed maximum EB value of 320 Oe after field cooling in the film deposited at 650 {sup ∘}C is high among the values reported for Ni-Mn-Sn thin films which is attributed to the coexistence of ferromagnetic (FM) and antiferromagnetic (AF) phases in the martensitic state. In the case of P{sub D} variation, with increase in P{sub D}, martensitic transformation temperatures were increased and a sharp transformation was observed in the film deposited at 0.06 mbar. Magnetization values at 5 K were higher for increasing P{sub D}. These observations are attributed to the compositional shift. EB effect is also present in these films. Microstructural features observed using atomic force microscopy (AFM) shows a fine twinning and reduced precipitation with increase in P{sub D}, which is also confirmed from the scanning electron microscopy (SEM) images. EB effects in both series were confirmed from the training effect. Target ageing effect has been observed in the films deposited before and after ninety days of time interval. This has been confirmed both on substrate temperature and Ar gas pressure variations.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Primordial spikes from wrapped brane inflation

Cosmic inflation driven by branes wrapping the extra dimensions involves Kaluza-Klein (KK) degrees of freedom in addition to the zero-mode position of the brane which plays the role of the inflaton. As the wrapped brane passes by localized sources or features along its inflationary trajectory in the extra dimensional space, the KK modes along the wrapped direction are excited and start to oscillate during inflation. We show that the oscillating KK modes induce parametric resonance for the curvature perturbations, generating sharp signals in the perturbation spectrum. The effective four dimensional picture is a theory where the inflaton couples to the heavy KK modes. The Nambu-Goto action of the brane sources couplings between the inflaton kinetic terms and the KK modes, which trigger significant resonant amplification of the curvature perturbations. We find that the strong resonant effects are localized to narrow wave number ranges, producing spikes in the perturbation spectrum. Investigation of such resonant signals opens up the possibility of probing the extra dimensional space through cosmological observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Influence of TiH{sub 2} on Interfacial Reaction Features Between Cubic Boron Nitride and Cu-Sn-Ti Active Filler Metals

Cubic boron nitride (CBN) grains are brazed by Cu-Sn-Ti filler metal in vacuum at 1223 K. Wetting behaviors, reaction layer features, and elemental distribution characteristics have been systematically investigated through scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). The results show that when the TiH{sub 2} content is 5 wt pct, virtually no sharp-edged, partially coated, and uncoated CBN grains can be observed, indicating that adequate wetting could be achieved. Moreover, a continuous reaction layer with uniform thickness (1.30 μm) consisting of TiN, TiB{sub 2}, and TiB is obtained, which indicates that large numbers of TiN, TiB{sub 2}, and TiB compounds could have been formed at the interface. However, when the TiH{sub 2} content exceeds 5 wt pct, the thickness of the reaction layer is no longer significantly expanding and excessive Ti present in the matrix will lower the volume percentage of Cu{sub 3}Sn{sub 1} phase, which will reduce the bonding strength of the brazing samples. Wear tests indicate that the minimum weight loss also occurs at 5 wt pct TiH{sub 2}.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Ultra-sharp plasmonic resonances from monopole optical nanoantenna phased arrays

Diffractively coupled plasmonic resonances possess both ultra-sharp linewidths and giant electric field enhancement around plasmonic nanostructures. They can be applied to create a new generation of sensors, detectors, and nano-optical devices. However, all current designs require stringent index-matching at the resonance condition that limits their applicability. Here, we propose and demonstrate that it is possible to relieve the index-matching requirement and to induce ultra-sharp plasmon resonances in an ordered vertically aligned optical nano-antenna phased array by transforming a dipole resonance to a monopole resonance with a mirror plane. Due to the mirror image effect, the monopole resonance not only retained the dipole features but also enhanced them. The engineered resonances strongly suppressed the radiative decay channel, resulting in a four-order of magnitude enhancement in local electric field and a Q-factor greater than 200.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Ultra-narrow ferromagnetic resonance in organic-based thin films grown via low temperature chemical vapor deposition

We present the growth of thin films of the organic-based ferrimagnetic semiconductor V[TCNE]{sub x} (x ∼ 2, TCNE: tetracyanoethylene) via chemical vapor deposition. Under optimized growth conditions, we observe a significant increase in magnetic homogeneity, as evidenced by a Curie temperature above 600 K and sharp magnetization switching. Further, ferromagnetic resonance studies reveal a single resonance with full width at half maximum linewidth of 1.4 G, comparable to the narrowest lines measured in inorganic magnetic materials and in contrast to previous studies that showed multiple resonance features. These characteristics are promising for the development of high frequency electronic devices that take advantage of the unique properties of this organic-based material, such as the potential for low cost synthesis combined with low temperature and conformal deposition on a wide variety of substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

A Detector for Proton Computed Tomography

Radiation therapy is a widely recognized treatment for cancer. Energetic protons have distinct features that set them apart from photons and make them desirable for cancer therapy as well as medical imaging. The clinical interest in heavy ion therapy is due to the fact that ions deposit almost all of their energy in a sharp peak – the Bragg peak- at the very end of their path. Proton beams can be used to precisely localize a tumor and deliver an exact dose to the tumor with small doses to the surrounding tissue. Proton computed tomography (pCT) provides direct information on the location on the target tumor, and avoids position uncertainty caused by treatment planning based on imaging with X-ray CT. The pCT project goal is to measure and reconstruct the proton relative stopping power distribution directly in situ. To ensure the full advantage of cancer treatment with 200 MeV proton beams, pCT must be realized.

Blazey, G.↗
DOE OSTI2023

Proximate spin liquid and fractionalization in the triangular antiferromagnet KYbSe 2

The Heisenberg triangular-lattice quantum spin liquid and its phase transitions to nearby magnetic orders have received much theoretical attention, but clear experimental manifestations of these states are rare. Here we demonstrate that a spin-half delafossite material, namely, KYbSe 2 , shows close proximity to the triangular-lattice Heisenberg quantum spin liquid. Using neutron scattering, we identify a diffuse continuum with a sharp lower bound within the measured spectra. Applying entanglement witnesses to the data indicates multipartite entanglement spread between its neighbours, and an analysis of its magnetic-exchange couplings reveals close proximity to the theoretical quantum spin-liquid phase. The key features of the data are reproduced by Schwinger boson theory and tensor network calculations with a substantial next-nearest-neighbour coupling. The strength of the dynamical structure factor at the Brillouin-zone K point shows a scaling collapse down to 0.3 K, indicating the existence of a second-order quantum phase transition. Finally, comparing this with previous theoretical work suggests that the proximate phase at a larger next-nearest-neighbour coupling is a gapped $\mathbb{Z}_{2}$ spin liquid, resolving a long-debated issue. Similar content being viewed by others

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2012

THE FERMI BUBBLES. I. POSSIBLE EVIDENCE FOR RECENT AGN JET ACTIVITY IN THE GALAXY

The Fermi Gamma-ray Space Telescope reveals two large gamma-ray bubbles in the Galaxy, which extend about 50 Degree-Sign ({approx}10 kpc) above and below the Galactic center (GC) and are symmetric about the Galactic plane. Using axisymmetric hydrodynamic simulations with a self-consistent treatment of the dynamical cosmic ray (CR)-gas interaction, we show that the bubbles can be created with a recent active galactic nucleus (AGN) jet activity about 1-3 Myr ago, which was active for a duration of {approx}0.1-0.5 Myr. The bipolar jets were ejected into the Galactic halo along the rotation axis of the Galaxy. Near the GC, the jets must be moderately light with a typical density contrast 0.001 {approx}< {eta} {approx}< 0.1 relative to the ambient hot gas. The jets are energetically dominated by kinetic energy, and overpressured with either CR or thermal pressure which induces lateral jet expansion, creating fat CR bubbles as observed. The sharp edges of the bubbles imply that CR diffusion across the bubble surface is strongly suppressed. The jet activity induces a strong shock, which heats and compresses the ambient gas in the Galactic halo, potentially explaining the ROSAT X-ray shell features surrounding the bubbles. The Fermi bubbles provide plausible evidence for a recent powerful AGN jet activity in our Galaxy, providing new insights into the origin of the halo CR population and the channel through which massive black holes in disk galaxies release feedback energy during their growth.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Effect of Cu substitution on the magnetic and dielectric properties of La{sub 2}NiMnO{sub 6}

In the continuation of our previous work [Biswal et al., J. Appl. Phys. 115, 194106 (2014)] of biphasic La{sub 2}NiMnO{sub 6} (LNM) prepared via sol-gel technique, here we are reporting the effect of Cu substitution at Ni site of LNM. The powder x-ray diffraction results of La{sub 2}Ni{sub 1−x}Cu{sub x}MnO{sub 6} (x = 0, 0.05, 0.1) confirm the biphasic nature (Pbnm + R-3c) for all samples along with increasing R-3c phase with Cu content in the sample. The temperature variation of magnetization (M) plot shows sharp ferromagnetic transitions of R-3c phase at 285 K, 278 K, and 270 K (obtained from dM/dT plot) and that of Pbnm phase at 165 K, 145 K, and 145 K for x = 0, 0.05, and 0.1, respectively. Weak antiferromagnetic type feature at 25 K (x = 0), is getting pronounced with Cu content in the sample and is now seen at 32 K and 266 K (for x = 0.05) and 32K and 257 K (for x = 0.1). Fitting of Curie-Weiss law in the paramagnetic region of χ{sup −1} vs T plot results slightly lower values of corresponding T{sub c}'s of R-3 c phase (277 K, 270 K, and 260 K), thus manifesting possibility of Griffiths like singularity. The onset temperature of Griffiths singularity occurs at 295 K (x = 0) and 281 K (x = 0.05 and 0.1), such that 295–277 K in x = 0, 281–270 K in x = 0.05, and 281–260 K in x = 0.1 sample is in Griffith's phase. Temperature dependent dielectric constant (ε{sub r}) shows usual step-like transitions with corresponding relaxation peaks in the dielectric loss (D) part. Cu substitution in LNM makes the entire dielectric plot shifts towards lower temperature such that high temperature plateau of step transition becomes evident. The peaks in dielectric loss for all compositions are found to obey Arrhenius law with activation energies 237 meV, 207 meV, and 180 meV for x = 0, 0.05, and 0.1, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Improved filters for angular filter refractometry

Angular filter refractometry is an optical diagnostic that measures the absolute contours of a line-integrated density gradient by placing a filter with alternating opaque and transparent zones in the focal plane of a probe beam, which produce corresponding alternating light and dark regions in the image plane. Identifying transitions between these regions with specific zones on the angular filter (AF) allows the line-integrated density to be determined, but the sign of the density gradient at each transition is degenerate and must be broken using other information about the object plasma. Additional features from diffraction in the filter plane often complicate data analysis. Here, in this paper, we present an improved AF design that uses a stochastic pixel pattern with a sinusoidal radial profile to minimize unwanted diffraction effects in the image caused by the sharp edges of the filter bands. We also present a technique in which a pair of AFs with different patterns on two branches of the same probe beam can be used to break the density gradient degeneracy. Both techniques are demonstrated using a synthetic diagnostic and data collected on the OMEGA EP (extended performance) laser.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Field-Driven Dynamics of Magnetic Hopfions

Herein, we present micromagnetic simulations on resonant spin wave modes of magnetic Hopfions up to 15 GHz driven by external magnetic fields. A sharp transition is found around 32 mT coinciding with a transition from Hopfions to magnetic torons. Furthermore, the modes exhibit characteristic amplitudes in frequency space accompanied by unique localization patterns in real space, and are found to be robust to damping around topological features, particularly vortex lines in Hopfions and Bloch points in torons. The marked differences in spin wave spectra between Hopfions, torons and target skyrmions can serve as fingerprints in future experimental validation studies of these novel 3d topological spin textures.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Sensitivity of inertial confinement fusion hot spot properties to the deuterium-tritium fuel adiabat

We determine the dependence of key Inertial Confinement Fusion (ICF) hot spot simulation properties on the deuterium-tritium fuel adiabat, here modified by addition of energy to the cold shell. Variation of this parameter reduces the simulation to experiment discrepancy in some, but not all, experimentally inferred quantities. Using simulations with radiation drives tuned to match experimental shots N120321 and N120405 from the National Ignition Campaign (NIC), we carry out sets of simulations with varying amounts of added entropy and examine the sensitivities of important experimental quantities. Neutron yields, burn widths, hot spot densities, and pressures follow a trend approaching their experimentally inferred quantities. Ion temperatures and areal densities are sensitive to the adiabat changes, but do not necessarily converge to their experimental quantities with the added entropy. This suggests that a modification to the simulation adiabat is one of, but not the only explanation of the observed simulation to experiment discrepancies. In addition, we use a theoretical model to predict 3D mix and observe a slight trend toward less mixing as the entropy is enhanced. Instantaneous quantities are assessed at the time of maximum neutron production, determined dynamically within each simulation. These trends contribute to ICF science, as an effort to understand the NIC simulation to experiment discrepancy, and in their relation to the high foot experiments, which features a higher adiabat in the experimental design and an improved neutron yield in the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Solar Thermoelectricity via Advanced Latent Heat Storage: A Cost-Effective Small-Scale CSP Application

We are developing a novel concentrating solar electricity-generating technology that is both modular and dispatchable. Solar ThermoElectricity via Advanced Latent heat Storage (STEALS) uses concentrated solar flux to generate high-temperature thermal energy, which directly converts to electricity via thermoelectric generators (TEGs), stored within a phase-change material (PCM) for electricity generation at a later time, or both allowing for simultaneous charging of the PCM and electricity generation. STEALS has inherent features that drive its cost-competitive scale to be much smaller than current commercial concentrating solar power (CSP) plants. Most obvious is modularity of the solid-state TEG, which favors smaller scales in the kilowatt range as compared to CSP steam turbines, which are minimally 50 MWe for commercial power plants. Here, we present techno-economic and market analyses that show STEALS can be a cost-effective electricity-generating technology with particular appeal to small-scale microgrid applications. We evaluated levelized cost of energy (LCOE) for STEALS and for a comparable photovoltaic (PV) system with battery storage. For STEALS, we estimated capital costs and the LCOE as functions of the type of PCM including the use of recycled aluminum alloys, and evaluated the cost tradeoffs between plasma spray coatings and solution-based boron coatings that are applied to the wetted surfaces of the PCM subsystem. We developed a probabilistic cost model that accounts for uncertainties in the cost and performance inputs to the LCOE estimation. Our probabilistic model estimated LCOE for a 100-kWe STEALS system that had 5 hours of thermal storage and 8-10 hours of total daily power generation. For these cases, the solar multiple for the heliostat field varied between 1.12 and 1.5. We identified microgrids as a likely market for the STEALS system. We characterized microgrid markets in terms of nominal power, dispatchability, geographic location, and customer type, and specified additional features for STEALS that are needed to meet the needs of this growing power market.

14 SOLAR ENERGY↗