Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The evolution of seafloor venting from hydrate-sealed gas reservoirs

Here we use 3D seismic data to show that three rows of seafloor gas mounds can be traced downward to leak points that lie at the hydrate-gas contact within three individual dipping coarse-grained sand bodies in the Terrebonne Basin, Walker Ridge block 313, northern Gulf of Mexico. We predict the overpressure within the sand bodies by assuming that the gas pressure at the vent points equal the least principal stress. We interpret that free gas accumulates at the base of the hydrate stability zone, trapped by the overlying sand which has a high methane hydrate saturation. The free gas accumulates until the gas pressure at the base of the hydrate stability zone reaches the least principal stress in the overlying mudrock, whereupon hydraulic fractures form and fluids are vented to the surface. The warm rising fluids and perhaps localized exothermic formation of hydrate raise the local salinity and temperature. This process progressively shifts the base of the hydrate stability zone to shallower depths and dissociates the hydrate seal within the sand, which creates new leak points and results in the observed migration of the seafloor vents. Within the southwest corner of the Terrebonne Basin, this process has repeated multiple times within the Blue, Orange, and Green sands. Here this study shows how the hydrate stability zone can influence the location of fluid expulsion and in turn be affected by the warm, rising, saline fluids sealed by hydrate.

58 GEOSCIENCES↗
DOE OSTI2023

Economic and operational investigation of CO 2 sequestration through enhanced oil recovery in unconventional reservoirs in Colorado, USA

The ongoing CCUS commercial projects are highly relied on the support of government incentives due to massive capital investment. Here, this study analyzes the economics of carbon capture utilization and sequestration (CCUS) projects, shows a state-wide CCUS deployment exercise, followed by simulation results of enhanced oil recovery (EOR) based CO 2 storage in unconventional reservoirs. The comprehensive economic analysis of capture, transportation, sequestration costs, enhanced 45Q tax credits, and EOR revenue implies the practicality of CO 2 -EOR to offset the high CCUS costs. With the economics understanding, we study the top CO 2 sources, existing CO 2 pipelines, and sequestration sinks in the state of Colorado, USA. This paper next presents results from EOR simulation in one section of the unconventional Denver-Julesburg (DJ) Basin Niobrara and Codell reservoirs. The simulation model is based on a geological static model, incorporated with hydraulic fracture stimulation, history matched to production, and calibrated to the microseismic and time-lapse surface seismic data. The CO 2 -EOR simulation results show that oil production can be increased and more CO 2 stored with: a longer primary production period; the presence of a shut-in period; higher injection rates; and multi-well injectors. The modeling results show that about 7–10 Mscf of CO 2 will be stored when recovering 1 stb of EOR oil. By adding the enhanced oil revenue and the carbon credits together, it is estimated that the most economic case can generate $\$13$ MM when oil price is assumed to be $\$80$/stb, and the EOR oil revenue is 3.4 times greater than that generated from 45Q incentives. It corresponds to the scenario that a five-year primary production is followed by CO 2 injection into four wells with the sequence of injection (4 MMscf/day for 6 months), shut-in (6 months) and production (12 months). The best practices in this study will provide valuable insights for similar CCUS projects in other unconventional fields. Furthermore, this study defines a term named “Carbon Neutrality Index (CNI)” by comparing the amount of CO 2 stored with that burned by EOR oil. The CNI value of 0 indicates the enhanced oil is carbon neutral; a negative CNI value implies there is a net reduction in carbon emission. The 4-year huff-n-puff (HnP) simulation leads to a positive CNI value, indicating that the EOR oil generated in this process is not carbon neutral yet.

03 NATURAL GAS↗
DOE OSTI2021

Magmatic, hydrothermal and ore element transfer processes of the southeastern Archean Superior Province implied from electrical resistivity structure

Although magmatic- and metamorphic- derived fluids are widely recognized mineralizing agents, the role of crustal architecture in defining source and sink zones within the middle to lower crust and upper mantle of ancient orogens remains enigmatic. The globally largest and best-preserved Archean greenstone belts lie in the Superior Province, Canada. They provide an ideal location to investigate the influence of igneous construction and subsequent syn-deformational plutonism and metamorphism on the localization of metal-rich melts and fluids throughout the crustal column. Integration of three-dimensional magnetotelluric modelling and seismic reflection sections across the Abitibi subprovince reveals details of a 'whole-of-crust' magmatic and hydrothermal system. East-west low resistivity structures broadly underlie the surface traces of the major deformation zones that are host to significant gold endowment (>200 Moz), while mid-crustal cross trends suggest mineralized fluids flowed along 'pipes' within fault planes. Most low resistivity structures are inferred to represent domains containing interconnected zones of graphite and/or sulfide. Furthermore, these delineate relict mantle source/transit domains and crustal pathways enriched by the flow of magmas or metamorphic fluids genetically related to a late-stage pulse of ore-bearing magmatism, possibly as a result of slab break-off or delamination. Using the combined MT and seismic data, we develop a 3-D crustal-scale model which highlights how evolving orogenic architecture-controlled mass transfer and metallogenic processes developed.

58 GEOSCIENCES↗
DOE OSTI2020

Coupled Time-Lapse Full-Waveform Inversion for Subsurface Flow Problems Using Intrusive Automatic Differentiation

We describe a novel framework for estimating subsurface properties, such as rock permeability and porosity, from time-lapse observed seismic data by coupling full-waveform inversion (FWI), subsurface flow processes, and rock physics models. For the inverse modeling, we handle the back propagation of gradients by an intrusive automatic differentiation strategy that offers three levels of user control: (1) At the wave physics level, we adopted the discrete adjoint method in order to use our existing high-performance FWI code; (2) at the rock physics level, we used built-in automatic differentiation operators from the TensorFlow backend; (3) at the flow physics level, we implemented customized partial differential equation (PDE) operators for the multiphase flow equations. The three-level coupled inversion strategy strikes a good balance between computational efficiency and programming efforts, and when the gradients are chained together, it constitutes a coupled inverse system. Our numerical experiments demonstrate that the three-level coupled inverse problem is superior in terms of accuracy to a traditional decoupled inversion strategy. Additionally, our method is able to simultaneously invert for parameters in empirical relationships such as the rock physics models. Our proposed inverted model can be used for reservoir performance prediction and reservoir management/optimization purposes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Post‐Perovskite Transition in Fe‐ and Al‐Bearing Bridgmanite: Effects on Seismic Observables

Abstract The primary phase of the Earth’s lower mantle, (Al, Fe)‐bearing bridgmanite, transitions to the post‐perovskite (PPv) phase at Earth’s deep mantle conditions. Despite extensive experimental and ab initio investigations, there are still important aspects of this transformation that need clarification. Here, we address this transition in (Al 3+ , Fe 3+ )‐, (Al 3+ )‐, (Fe 2+ )‐, and (Fe 3+ )‐bearing bridgmanite using ab initio calculations and validate our results against experiments on similar compositions. Consistent with experiments, our results show that the onset transition pressure and the width of the two‐phase region depend distinctly on the chemical composition: (a) Fe 3+ ‐, Al 3+ ‐, or (Al 3+ , Fe 3+ )‐alloying increases the transition pressure, while Fe 2+ ‐alloying has the opposite effect; (b) in the absence of coexisting phases, the pressure‐depth range of the Pv‐PPv transition is likely too broad to cause a sharp D” discontinuity (<30 km); (c) the average Clapeyron slope of the two‐phase regions are consistent with previous measurements, calculations in MgSiO 3 , and inferences from seismic data. In addition, (d) we observe a softening of the bulk modulus in the two‐phase region. The consistency between our results and experiments gives us the confidence to proceed and examine this transition in aggregates with different compositions computationally, which will be fundamental for resolving the most likely chemical composition of the D" region by analyses of tomographic images.

Geochemistry & Geophysics↗
DOE OSTI2022

Structural Characterization of a Toppling Rock Slab From Array-Based Ambient Vibration Measurements and Numerical Modal Analysis

Accurate assessments of the internal structure and boundary conditions of unstable rock slopes are imperative for evaluating landslide hazard scenarios. However, instability characterization at depth remains challenging and is often limited by costly or invasive subsurface investigations. Here, we develop a new approach coupling array-based ambient vibration modal analysis and numerical modeling to improve structural characterization of rock slope instabilities at depth. We used ambient noise cross-correlation on 4 hr of seismic data recorded by an array of 30 nodal geophones at a 500-m-long toppling rock slab in Utah, USA to identify modal frequencies between 0.8 and 3.5 Hz and derive modal displacements. We show that transverse and longitudinal bending modes span the length of the instability, indicating an interconnected slab. Further, statistical comparison of field results with outputs from >1,000 finite element models with varying boundary conditions showed that the instability depth varies between 40–70 and 10–20 m in the middle and lateral regions, respectively. Our approach yields new information on the structural conditions of rock cliff and column instabilities at depth, which is not easily obtained by other means but is imperative for change detection monitoring and improved hazard assessments.

58 GEOSCIENCES↗
DOE OSTI2023

Examining Infrasound Propagation at High Spatial Resolution Using a Nodal Seismic Array

Infrasound—acoustic waves in the atmosphere below 20 Hz—is a useful monitoring tool. Topography and atmospheric structure strongly control infrasound propagation, and at common source–receiver distances neither of these effects can be ignored when quantitative source constraints are sought. Detailed spatial measurements of the infrasound wavefield would inform propagation models and improve source estimates. However, the “large-N” deployment strategy now well-known in seismology has not yet been realized for infrasound studies. Here, we use the 900-node seismic array from the 2014 Imaging Magma Under St. Helens (iMUSH) experiment as a proxy for a large-N infrasound network, by leveraging acoustic–seismic coupled arrivals. The active-source component of iMUSH consisted of 23 shallowly buried explosions around Mount Saint Helens volcano; these explosions produced epicentral infrasound recorded on the nodes. We find that the bulk presence of ground-coupled infrasound on the nodes is controlled by wind noise and source–receiver distance, with observed arrivals for eight explosions. Explosions with the most extensive coupling produce complex spatial waveform patterns across the array. These patterns are related to both topographic and atmospheric propagation effects, as well as spatially variable site (coupling) effects. We compare our observations to simple topographic diffraction and high-resolution wind advection models, and full-wave numerical simulations. We find strong spatial correlations between (a) coupled arrival strength and modeled topographic obstruction and (b) coupled arrival time and along-path winds. Our seismoacoustic analyses and results are applicable to other existing and future nodal seismic data sets and can expand the utility of such deployments.

58 GEOSCIENCES↗
DOE OSTI2025

Thermoelastic Properties of Iron-Rich Ringwoodite and the Deep Mantle Aerotherm of Mars

The Martian mantle is considered to have a higher Fe/Mg ratio than the Earth's mantle. Ringwoodite, γ-(Mg,Fe) 2 SiO 4 , is likely the dominant polymorph of olivine in the core-mantle boundary (CMB) region of Mars. We synthesized anhydrous iron-rich ringwoodite with molar Mg/(Mg + Fe) = 0.44 and determined its thermal equation of state up to 35 GPa and 750 K by synchrotron X-ray diffraction. Using a third order Birch-Murnaghan equation of state, we obtain K T0 = 182 (3) GPa, K' = 4.6 (2), and α 0 = 3.18 (6) × 10 -5 K -1 . Using these results and an updated mineralogical model with an iron-rich composition of Mg/(Mg + Fe) = 0.75 for the Martian mantle, we estimate ~1900 K for the temperature of the D1000 seismic discontinuity inside Mars. The resulting adiabat predicts a warm aerotherm, which could explain the presence of partial melt at the CMB of Mars recently detected with seismic data from the 2019 InSight mission.

58 GEOSCIENCES↗
DOE OSTI2023

Dating submarine landslides using the transient response of gas hydrate stability

Abstract Submarine landslides are prevalent on the modern-day seafloor, yet an elusive problem is constraining the timing of past slope failure. We present a novel age-dating technique based on perturbations to underlying gas hydrate stability caused by slide-impacted seafloor changes. Using three-dimensional (3-D) seismic data, we mapped an irregular bottom simulating reflection (BSR) underneath a submarine landslide in the Orca Basin, Gulf of Mexico. The irregular BSR mimics the pre-slide seafloor geometry rather than the modern bathymetry. Therefore, we suggest that the gas hydrate stability zone (GHSZ) is still adjusting to the post-slide sediment temperature. We applied transient conductive heat-flow modeling to constrain the response of the GHSZ to the slope failure, which yielded a most likely age of ca. 8 ka, demonstrating that gas hydrate can respond to landslides even on multimillennial time scales. We further provide a generalized analytical solution that can be used to remotely date submarine slides in the absence of traditional dating techniques.

Geology↗
DOE OSTI2022

VelocityGAN

VelocityGAN is a software to solve subsurface imaging problems. It leverages a generative adversarial network to model the correspondence from seismic data to subsurface velocity structures.

Lin, Youzuo↗
DOE OSTI2022

InversionNet

InversionNet is a software to solve subsurface imaging problems. It leverages a convolutional neural network with an encoder-decoder structure to model the correspondence from seismic data to subsurface velocity structures.

Lin, Youzuo↗
DOE OSTI2025

Seismic H2: Version 1.0

Seismic-H2 is an integrated software package for geological hydrogen reservoir simulation, optimization, and leakage monitoring. The package includes multiple components: (1) code used for modeling seismic wave propagation in 3D heterogeneous elastic media based on finite-difference method to support detection of geological hydrogen storage reservoir leakage; (2) 3D reservoir simulations of leaks from an underground reservoir and 3D simulations of saline aquifers and depleted gas reservoirs; (3) seismic monitoring costs of passive and active seismic monitoring required for UHS; (4) rock physics calculations and interpolations for converting the reservoir simulations from part (2) into the elastic media models in part (1); (5) pre-processing seismic data; and lastly (6), a GUI interface that combines these different components.

Creasy, Neala↗
DOE OSTI2022

Estimating SHmax azimuth with P sources and vertical geophones: Use P-P reflection amplitudes or use SV-P reflection times?

We compared two methods for extracting the azimuth of maximum horizontal stress (SHmax) from 3D land-based seismic data generated by a P source and recorded with vertical geophones. In the first method, we used the direct-SV mode that is produced by all land-based P sources. P sources generate SV illumination that radiates in all azimuth directions from a source station and creates SV-P reflections that are recorded by vertical geophones. Unless stratigraphy has steep dip, SV-P raypaths recorded by vertical geophones are the reverse of P-SV raypaths recorded by horizontal geophones. Thus, SV-P data provide the same S-wave sensitivity to stress fields as popular P-SV data do. In the second method, we retrieved P-P reflections and then performed an amplitude-variation-with-azimuth (AVA) analysis of the amplitude-gradient behavior of P-P reflection wavelets. We did this analysis in narrow azimuth corridors to determine the gradient of reflection-wavelet amplitudes as a function of azimuth. This P-P AVA amplitude-gradient method has been of great interest in the reflection seismology community since it was introduced in the late 1990s. Each of these methods, AVA analysis of the gradient of P-P reflection amplitudes and azimuth-dependent arrival times of SV-P reflections, can be used to determine the azimuth of SHmax stress. We compare the results of the two methods with ground truth measurements of SHmax azimuth at a CO 2 sequestration site in the Michigan Basin. SHmax azimuths were determined from P-P and SV-P data at three major boundaries at depths of approximately 3500 ft (1067 m), 5500 ft (1676 m), and 7500 ft (2286 m). Two estimates of SHmax azimuth (one using SV-P data and one using P-P data) were made at each stacking bin inside a 24 mi 2 (62 km 2 ) image space. The result was approximately 98,000 estimates of SHmax azimuth across each of these three boundaries for each of these two prediction strategies. Histogram displays of PP AVA gradient estimates had peaks at correct azimuths of SHmax at all three depths, but the spread of the distributions widened with depth and split into two peaks at the deepest boundary. In contrast, each histogram of SHmax azimuth predicted by azimuth-dependent SV-P traveltimes had a single, definitive peak that was positioned at the correct SHmax azimuth at all three boundary depths.

Geochemistry & Geophysics↗
DOE OSTI2024

Mechanisms for Microseismicity Occurrence Due to CO 2 Injection at Decatur, Illinois: A Coupled Multiphase Flow and Geomechanics Perspective

Here, we numerically investigate the mechanisms that resulted in induced seismicity occurrence associated with CO 2 injection at the Illinois Basin–Decatur Project (IBDP). We build a geologically consistent model that honors key stratigraphic horizons and 3D fault surfaces interpreted using surface seismic data and microseismicity locations. We populate our model with reservoir and geomechanical properties estimated using well-log and core data. We then performed coupled multiphase flow and geomechanics modeling to investigate the impact of CO 2 injection on fault stability using the Coulomb failure criteria. We calibrate our flow model using measured reservoir pressure during the CO 2 injection phase. Our model results show that pore-pressure diffusion along faults connecting the injection interval to the basement is essential to explain the destabilization of the regions where microseismicity occurred, and that poroelastic stresses alone would result in stabilization of those regions. Slip tendency analysis indicates that, due to their orientations with respect to the maximum horizontal stress direction, the faults where the microseismicity occurred were very close to failure prior to injection. These model results highlight the importance of accurate subsurface fault characterization for CO 2 sequestration operations.

58 GEOSCIENCES↗
DOE OSTI2021

Analysis of Seismic Signals Generated by Vehicle Traffic with Application to Derivation of Subsurface Q-Values

Correct identification and modeling of anthropogenic sources of ground motion are of considerable importance for many studies, including detection of small earthquakes and imaging seismic properties below the surface. Here, to understand signals generated by common vehicle traffic, we use seismic data recorded by closely spaced geophones normal to roads at two sites on San Jacinto fault zone. To quantify the spatiotemporal and frequency variations of the recorded ground motions, we develop a simple analytical solution accounting for propagation and attenuation of surface waves. The model reproduces well-observed bell-shaped spectrograms of car signals recorded by geophones close to roads, and it can be used to estimate frequency-dependent Q-values of the subsurface materials. The data analysis indicates Q-values of 3–40, for frequencies up to 150 Hz for road-receiver paths at the two examined sites. The derived Q-values are consistent with attenuation factors of surface waves previously obtained with other methods. The analytical results and analysis procedure provide a highly efficient method for deriving Q-values of shallow subsurface materials.

58 GEOSCIENCES↗
DOE OSTI2025

Array-Based Seismic Measurements of OSIRIS-REx’s Re-Entry

The return home of the OSIRIS-REx spacecraft in September 2023 marked only the fifth time that an artificial object entered the Earth’s atmosphere at interplanetary velocities. Although rare, such events serve as valuable analogs for natural meteoroid re-entries; enabling study of hypersonic dynamics, shock wave generation, and acoustic-to-seismic coupling. Here, in this study, we report on the signatures recorded by a dense (100 m scale) 11-station array located almost directly underneath the capsule’s point of peak atmospheric heating in northern Nevada. Seismic data are presented, which allow inferences to be made about the shape of the shock wave’s footprint on the surface, the capsule’s trajectory, and its flight parameters.

58 GEOSCIENCES↗
DOE OSTI2020

Waveform Modeling and Simulation for Crustal Phases [Slides]

Goals for this project are to: numerically simulate wave propagation in layered crustal models with laterally-varying structure; Investigate seismic phases Pg and Pn; help understand the variability and complexity of these phases in recorded seismic data; and Use wavefield movies and "wavepaths" to suggest improvements for SALSA3D crustal tomography. In this presentation I will outline progress that has been made to date in an effort to modify a community research modeling code ("simulator")into a tool which can be used by GNDD researchers to study the effect of varying crustal velocity on wavefield propagation.

58 GEOSCIENCES↗