SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ripple adder reduces the number of logic circuits required to preform binary addition and subtraction. The adder uses dual input and delayed output flip-flops in one register. The contents of this register are summed with those of a standard register through conventional AND/gates.
DC to DC HF converter using two synchronized complementary converters to minimize ripple and filtering problems
Simple circuit provides two different dc output voltages from an ac source. It employs a full-wave rectifier connected to two passive branches from which the separate dc voltages are taken. The outputs have low ripple and good voltage regulation.
Frequency-to-analog converter has a fast response time and a low ripple. The circuit uses a frequency-to-pulse converter which provides two pulse trains, both at the same frequency as that of the input signal, but with a 10 microsecond difference between the trains.
Variable duration pulse integrator design for integrating pulse duration modulated pulses with elimination of ripple content
Coning motion can prevent photographic and TV cameras and other oriented spacecraft experiments from maintaining a steady scan, and it can introduce a ripple in the high-gain communication system. Nutation dampers are used to remove this type of spacecraft instability. The first nutation damper flown in a missile for the stabilization of the gyroscope consisted of a hollow ring that was partially filled with mercury, and the sloshing of the mercury dissipated the nutational energy. A similar mercury-ring damper was used in the Pioneer 1 lunar probe in 1958 and became the first nutation damper to be used in space. Since then many types of nutation dampers have been designed for spin-stabilized spacecraft ranging in size from small scientific satellites to large space stations.
A high torque rotary actuator was designed, fabricated and tested. Exacting requirements were placed on performance and physical characteristics of the actuator, particularly in the area of stiffness, backlash, torque ripple, power and size and weight. A brushless dc motor was designed utilizing rare earth magnets to meet power and weight requirements. A 26-to-1 planetary roller gear transmission was selected to best meet overall requirements. The transmission utilizes parallel gear and roller paths to minimize backlash and breakaway torque.
A review is given of information obtained in recent years concerning the effects on sonic-boom signatures of departures of the atmosphere from a perfectly stratified time invariant model. These effects include the observed random variations in boom overpressures from those expected for a stratified atmosphere, the anomalously large and variable rise times, and the occurrence of spiked or rounded waveforms rather than the characteristic N waves. The extent of the variability in data recorded during actual flight tests is summarized in the form of histograms, representing experimentally obtained probability density functions. The physical mechanisms believed to be responsible for the variations and the anomalous features in the signatures are described. These include refraction and subsequent wavefront rippling by turbulence, the possible focusing or defocusing of rays, the formation of caustics, and the phenomenon of wavefront folding, diffraction, and scattering. Recent statistical theories of shock propagation through a turbulent atmosphere proposed by Crow, George and Plotkin, Pierce, Horning, and others are reviewed.
Use of extensions of the existing theory of magnetospheric convection to describe the dynamics of the plasmasphere and the variation in the plasmapause location. The equatorial local time plane is divided into three separate and physically distinct regions, the bulge region, the nightside region, and the dayside region, corresponding to local times of 1500 to 2200 hrs, 2200 to 0600 hrs, and 0600 to 1500 hrs, respectively. The characteristics predicted by the model in the bulge region are: presence of the bulge at dusk, 1/R to the 4th power radial dependence of plasma concentration, and large fluctuations in plasma density at the plasmapause and plasma detachment. In the nightside region the predicted characteristics are: rapid response to magnetic activity changes, formative region for plasmasphere ripples, and the formative region for the dayside plasmapause location. The model also predicts the dayside plasmasphere characteristics, such as the slow response to magnetic activity changes, and filling of the plasmasphere from the ionosphere, including the formation of a 'double plasmapause.'
The work is reported on laser operation in a vacuum, and the theoretical response of active scattering particle spectrometers (ASPS). The theoretical considerations connected with the thermal, interferometric and electrical problems that influence laser operation under vacuum conditions are discussed along with the scattering signal pulses with high frequency ripple content which were observed while operating the ASPS.
During the Mariner 9 extended mission the recession of the north polar ice caps was monitored for 130 days. The edge of the cap displayed a peculiar polygonal outline during most of this period. Regional topographic control is suggested as the most likely cause of the polygonality. Whereas densely cratered terrain dominates the south polar region, moderately cratered plains underlie the polar deposits in the north polar region. The mottled cratered plains have been mantled by light deposits located in annular rings south of 70 N. The erosional boundaries between these deposits and the subjacent cratered plains are gradational, show no local topographic relief, and display a spiral serrated circumpolar pattern suggesting eolian erosion. Smooth plains and 'etch-pitted' plains underlie the central polar layered deposits in both polar regions. In addition, these plains have one other morphological variant in the north. Here they display a pattern of very coherent ripple-like waveforms varying in wavelength from several hundred meters to a few kilometers.
Computer simulation is used to calculate the time-domain waveform of standard T-pulse-and-bar test signal distorted in passing through an FM television system. The simulator includes flat or preemphasized systems and requires specification of the RF predetection filter characteristics. The predetection filters are modeled with frequency-symmetric Chebyshev (0.1-db ripple) and Butterworth filters. The computer was used to calculate distorted output signals for sixty-four different specified systems, and the output waveforms are plotted for all sixty-four. Comparison of the plotted graphs indicates that a Chebyshev predetection filter of four poles causes slightly more signal distortion than a corresponding Butterworth filter and the signal distortion increases as the number of poles increases. An increase in the peak deviation also increases signal distortion. Distortion also increases with the addition of preemphasis.
The basic operational characteristics of dc-to-dc converters are analyzed along with the basic physical characteristics of power converters. A simple class of dc-to-dc power converters are chosen which could satisfy any set of operating requirements, and three different controlling methods in this class are described in detail. Necessary conditions for the stability of these converters are measured through analog computer simulation whose curves are related to other operational characteristics, such as ripple and regulation. Further research is suggested for the solution of absolute stability and efficient physical design of this class of power converters.
An algorithm is proposed for generating sequences of Chebyshev series which are the best approximations of an astronomical ephemeris in the sense of Chebyshev over large intervals of time. The criterion for a polynomial approximation of a function to be the best polynomial approximation of the function is that the error function present certain rippling characteristics as described by Remez (1957). General features of the program in PL/1 are described.
The basic operational characteristics of dc-to-dc converters are analyzed. The basic physical characteristics of power converters are identified. A simple class of dc-to-dc power converters is chosen which could satisfy any set of operating requirements. Three different controlling methods in this class are described in detail. Necessary conditions for the stability of these converters are measured through analog computer simulation. These curves are related to other operational characteristics, such as ripple and regulation. Finally, further research is suggested for the solution of the physical design of absolutely stable, reliable, and efficient power converters of this class.
Solid-state, electronically scanned, linear detector arrays are now available which can be used in a pushbroom scan mode imaging system for high-resolution multispectral earth resource survey applications. These arrays provide high performance in the visible to near-IR region. Two performance criteria must be assessed in the choice of a detector array: signal-to-noise ratio and spectral response. Consideration of diffraction limitations shows that optics size cannot be significantly reduced by using very low-noise detectors. The required spectral response for a viable detector array should not have spectral ripples that cause a low-level, but significant, error in the detected effective reflectance of the target.
The activities at the Venus Station (DSS 13) and the Microwave Test Facility, both operated by the Development Support Group, during the 6-month period ending October 15, 1975, were discussed and progress noted. Successful remote operation of the Venus Station from Pasadena during a pulsar observing track was described, along with significant tracking of the planet Venus in an interferometric planetary radar mode. Completion of the first phase of the demonstration of long-distance (1.6-km) transmission of microwave power was reported, with an RF-to-dc conversion efficiency of better than 80% and 30 kW of dc recovered. Routine transmission of clock synchronization signals to the overseas complexes with 64-m antenna stations was also discussed, and extensive analysis of a reported problem with the DSS 14 HV dc power supply which resulted in excessive ripple voltage interfering with transmitter operation was described.
The Metals Melting Skylab Experiment consisted of selectively melting, in sequence, three rotating discs made of aluminum alloy, stainless steel, and tantalum alloy. For comparison, three other discs of the same three materials were similarly melted or welded on the ground. The power source of the melting was an electron beam unit. Results are presented which support the concept that the major difference between ground base and Skylab samples (i.e., large elongated grains in ground base samples versus nearly equiaxed and equal sized grains in Skylab samples) can be explained on the basis of constitutional supercooling, and not on the basis of surface phenomena. Microstructural observations on the weld samples and present explanations for some of these observations are examined. In particular, ripples and their implications to weld solidification were studied. Evidence of pronounced copper segregation in the Skylab A1 weld samples, and the tantalum samples studied, indicates a weld microhardness (and hence strength) that is uniformly higher than the ground base results, which is in agreement with previous predictions. Photographs are shown of the microstructure of the various alloys.