SEARCH · Engineering Papers

Results for “reverse rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Regeneration of Active Surface Alloys during Cyclic Oxidation and Reduction: Oxidation of H 2 on Pd/Ag(111)

The surface morphology and composition of a catalyst during excursions between oxidizing and reducing conditions can change substantially, especially in bimetallic alloys. Both thermodynamic and kinetic factors play a role in determining the properties of alloy surfaces where the active phase may be a metastable state. Previously, Ag oxide reduction was shown to be dramatically enhanced when Pd is on the surface; however, Pd is more stable when dissolved in Ag, raising the question as to whether a highly active Pd surface state will persist over multiple reaction cycles—a requirement for catalytic function. Experiments herein demonstrate that the enhanced chemical functionality due to the presence of Pd on the surface is retained, based on the enhanced rate of silver oxide reduction over multiple oxidation/reduction cycles for a Pd/Ag(111) model. Repeated oxidation and reduction promote PdAg alloying and reversible structural and compositional changes are detected using X-ray photoelectron spectroscopy. Furthermore, this study establishes that metastable phases can persist in reactive processes on surfaces, indicating their potential in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Local Modulation of Single-Atomic Mn Sites for Enhanced Ambient Ammonia Electrosynthesis

Rationally tuning the local structures of single-atomic active sites for the electrocatalytic N 2 reduction reaction (NRR) remains an urgent but worthwhile research topic. Herein, we accomplish the local modulation of single-atomic Mn sites and construct single Mn–O 3 N 1 sites anchored on porous carbon (Mn–O 3 N 1 /PC) by delicately controlling the Mn–O bonding conditions. Furthermore, the constructed structures are confirmed via the combination of atomic-scale imaging, Raman spectroscopy, synchrotron radiation-based soft and hard X-ray absorption spectroscopies, and X-ray photoelectron spectroscopy. The Mn–O 3 N 1 /PC catalyst yields an NH 3 yield rate of 66.41 μg h –1 mg cat. –1 (corresponding to 1.56 mg h –1 mg Mn –1 ) at -0.35 V versus reversible hydrogen electrode, which is about four times that on the control Mn–N 4 /PC catalyst. The enhanced NRR performance is ascribed to its unique geometry and electronic structures, which not only facilitate the adsorption and activation of the N 2 molecule but also lower the free energy change of the potential-determining step.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Dynamic response of 17-4 stainless steel as a function of manufacturing method and heat treatment

We present a series of plate-impact experiments on 17-4 stainless steel to study the effect of manufacturing method and heat treatment on the Hugoniot elastic limit (HEL), Hugoniot, phase transformation stress, and spallation strength. Two traditional manufacturing methods were considered, wrought processing and casting, as well as two additive manufacturing methods, laser powder-bed fusion (LPBF) and wire-fed electron beam (EBAM). For both LPBF and EBAM 17-4 stainless steel variants, two billets were printed, enabling the application of two unique heat treatments. The HEL stress depended heavily on the thermal history, with the HEL increasing after the formation of Cu-rich precipitates via heat treatment. The Hugoniot response both below and above the phase transition was unaffected by the manufacturing method or heat treatment. The phase transition stress depended heavily on the thermal history, with its variation being attributed to the presence of various microstructural features. This is supported by a marked increase in the phase transition stress after precipitation hardening. These results suggest that the notion of the phase transition stress being dictated by bulk composition is an oversimplification and the stress fields generated by the meso-scale structure are a dominant force. The spallation strength was lower in the cast material compared to all other 17-4 stainless steel variants due to the presence of brittle δ-ferrite inclusions. Additionally, a drop in the tensile strain-rate was observed in the spallation response above the phase transition stress, which was hypothesized to stem from the kinetics of the reversion to the low-pressure phase during spall.

Compressive stress↗

DOE OSTI2023

Growth of titania and tin oxide from Ti 2 SnC via rapid thermal oxidation in air for lithium-ion battery application

Herein, we report the synthesis of TiO 2 –SnO 2 –C/carbide hybrid electrode materials for Li-ion batteries (LIBs) via two different methods of controlled oxidation of layered Ti 2 SnC. The material was partially oxidized in an open-air furnace (OAF) or using a rapid thermal annealing (RTA) approach to obtain the desired TiO 2 –SnO 2 –C/carbide hybrid material; the carbide phase encompassed both residual Ti 2 SnC and TiC as a reaction product. We tested the oxidized materials as an anode in a half cell to investigate their electrochemical performance in LIBs. Analysis of the various oxidation conditions indicated the highest initial lithiation capacity of 838 mAh/g at 100 mA/g for the sample oxidized in the OAF at 700°C for 1 h. Still, the delithiation capacity dropped to 427 mAh/g and faded over cycling. Long-term cycling demonstrated that the RTA sample treated at 800°C for 30 s was the most efficient, as it demonstrated a reversible capacity of around 270 mAh/g after 150 cycles, as well as a specific capacity of about 150 mAh/g under high cycling rate (2000 mA/g). Given the materials’ promising performance, this processing method could likely be applied to many other members of the MAX family, with a wide range of energy storage applications.

25 ENERGY STORAGE↗

DOE OSTI2021

ZEB1 induces non-small cell lung cancer development by targeting microRNA-320a to increase the expression of RAD51AP1

Lung cancer is the most prevalent cancer worldwide, with its mortality rate reported to be in millions annually; one of the two subtypes is non-small cell lung cancer (NSCLC). In this study, we investigated the interactions and expressions of zinc finger E-box binding homeobox 1 (ZEB1), microRNA-320a (miR-320a) and RAD51-associated protein 1 (RAD51AP1) in NSCLC tissues to determine the roles of ZEB1 in regulation of miR-320a and RAD51AP1 in the development and metastasis of NSCLC. First, the expression levels of miR-320a and ZEB1 were quantified in NSCLC tissues and cells. Transfection assay was conducted to identify the effects of miR-320a on the progression of NSCLC cells. The interaction of miR-320a with ZEB1 and RAD51AP1 was predicted and verified using dual-luciferase reporter gene assay and chromatin immunoprecipitation assay. Finally, subcutaneous xenograft tumors of 6-week mice and metastatic model tumors of 8-week mice were established to further explore the in vivo effect of miR-320a/ZEB1/RAD51AP1 on NSCLC. The findings revealed a lower expression of miR-320a in NSCLC tissues and cells, while this result was reversed regarding ZEB1 expression. ZEB1 suppressed miR-320a expression and upregulation of miR-320a resulted in the reduction of proliferation, invasion and metastasis rate of NSCLC cells, and promoted NSCLC cell apoptosis. ZEB1 promoted the expression of RAD51AP1 via inhibition of miR-320a, promoting tumor growth in vivo. ZEB1 transcriptionally inhibited the expression of miR-320a and upregulated the expression of RAD51AP1, thereby promoting metastasis in NSCLC.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

A layered Prussian blue analogue as fast-charging negative electrode material for lithium-ion batteries

The simultaneous achievement of fast-charging and high specific capacity remains a critical challenge for lithium-ion battery negative electrodes. Here we report a layered manganese-based Prussian blue analogue, synthesized through vacancy control and subsequent thermal transformation. As a conversion-type negative electrode, this material exhibits high-rate performance, delivering a specific capacity of 510 mAh g −1 at a specific current of 8 A g −1 , and operates at a moderate average voltage of approximately 1.2 V vs. Li/Li + , which mitigates lithium plating risks. This high-rate capability stems from the analogue’s specific linkage configurations, which facilitate a high content of active transition metal and strong Li+ adsorption at nitrogen sites. The high transition metal content enables a high reversible capacity, while strong Li + adsorption promotes an efficient initial crystalline-to-amorphous transformation. This process induces dynamically reversible component migration during subsequent cycling, thereby enhancing conversion reaction kinetics. Our findings provide insights into the application of Prussian blue analogues as fast-charging negative electrode materials. The development of fast-charging and high-capacity negative electrodes is critical for advanced lithium-ion batteries. Here, authors use a vacancy engineering strategy to develop a layered Prussian blue analogue with competitive rate capability, delivering a specific capacity of 510 mAh g −1 at a specific current of 8 A g −1 .

25 ENERGY STORAGE↗

DOE OSTI2024

Greenhouse gas and dissolved oxygen production and consumption rates associated with Regier et al. (2023)

Tidal inundation along the coastal terrestrial-aquatic interface controls soil and sediment biogeochemistry and gas dynamics. Although a rich literature exist on studies of the influence of tidal waters on the biogeochemistry of coastal ecosystem soils, few studies have experimentally addressed the reverse question: How do soils (or sediments) from different coastal ecosystems influence the biogeochemistry of the tidal waters that inundate them? We conducted short-term microcosm laboratory experiments where seawater was amended with sediments and soils collected across regional gradients of inundation exposure (i.e., frequently to rarely inundated) and measured changes in dissolved oxygen and greenhouse gas concentrations to calculate gas consumption or production rates occurring during seawater exposure to terrestrial materials. This data package contains dissolved oxygen and greenhouse gas data collected during incubation of soils and sediments collected at 18 sites, which were used in the publication Regier et al. (2023) entitled “Coastal inundation regime moderates the short-term effects of sediment and soil additions on seawater oxygen and greenhouse gas dynamics: a microcosm experiment” which is published in Frontiers in Marine Science (DOI: https://doi.org/10.3389/fmars.2023.1308590).---Acknowledging EXCHANGE: General Support and Data Product UseWe ask that users of EXCHANGE data add the following acknowledgement when publishing data in scholarly articles and data repositories:"This research is based on work supported by COMPASS-FME, a multi-institutional project supported by the U.S. Department of Energy, Office of Science, Biological and Environmental Research as part of the Environmental System Science Program."

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Surface Amorphization of Vanadium Dioxide (B) for K-ion Battery

Given the merits of low cost, fast ionic transport in electrolyte, and high operating voltage, potassium ion batteries (PIBs) are promising alternatives to lithium-ion batteries. However, developing suitable electrode materials that can reversibly accommodate large potassium ions is a great challenge. In this paper, guided by density functional theory (DFT) calculations, it is demonstrated that the strategy of interfacial engineering via surface amorphization of VO 2 (B) nanorods (SA-VO 2 ), which results in the formation of a crystalline core/amorphous shell heterostructure, enables superior K + storage performance in terms of large capacity, outstanding rate capability, and long cycle stability working as an anode for PIBs. DFT calculations reveal that the created crystalline/amorphous heterointerface in SA-VO 2 can substantially lower the surface energy, narrow the band gap, and reduce the K + diffusion barrier of VO 2 (B). These conditions enable enhanced K + storage capacity and rapid K + /electron transfer, which result in large capacity and outstanding rate capability. Using in situ X-ray diffraction and in situ transmission electron microscopy complemented by ex situ microscopic and spectroscopic techniques, it is unveiled that the superior cycling stability originates from the excellent phase reversibility with negligible strain response and robust mechanical behavior of SA-VO 2 upon (de)potassiation.

25 ENERGY STORAGE↗

DOE OSTI2026

Kinetic and modeling studies of the mechanism of the dehydrogenation of Mg(BH 4 ) 2 to Mg(B 3 H 8 ) 2

Since its discovery over 15 years ago, the reversible dehydrogenation of Mg(BH 4 ) 2 to Mg(B 3 H 8 ) 2 has remained one of the more intriguing hydrogen-cycling systems. While the mechanism of this reaction has been the subject of a good deal of speculation and computational studies, prior to this work it had not been probed through kinetic studies. Previous reports of the dehydrogenation of Mg(BH 4 ) 2 to Mg(B 3 H 8 ) 2 have not included kinetic studies. The present studies have shown that the dehydrogenation of Mg(BH 4 ) 2 to Mg(B 3 H 8 ) 2 is suppressed by hydrogen pressure indicating that the rate-limiting step in this process involves hydrogen elimination. Computational modeling of kinetic data obtained from monitoring the hydrogen elimination from Mg(BH 4 ) 2 to Mg(B 3 H 8 ) 2 under static vacuum over a range of temperatures supports that the dehydrogenation occurs through a reversible three-step process in which the elimination of hydrogen from the [B 3 H 10 ] − intermediate is rate limiting. A mechanism involving the low energy transfer of neighboring BH3 groups is proposed to account for the formation of [B 3 H 8 ] − at relatively low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Effects of Water Vapor on the Reactivity of Aluminosilicates in Vapor-Phase Propanal Aldol Condensation

Aluminosilicate materials have been extensively studied as efficient aldol catalysts for C-C coupling reactions due to their acidic nature, high surface area, thermal stability, and porous structure. This work investigated the impact of water vapor pressure on the catalytic reactivity of aluminosilicates for the aldol condensation of propanal to 2-methyl-2-pentenal (MP). The catalytic performance of amorphous SiO2-Al2O3 (A-Si-Al) and aluminated MCM-41 (Al-MCM-41) for the vapor-phase aldol condensation of propanal was evaluated at 200 degrees C as a function of vapor-phase water content at atmospheric pressure. Our findings demonstrate that co-feeding low water vapor pressures (1-18 kPa) with propanal enhances the rates of MP production at 200 degrees C on A-Si-Al. Conversely, water vapor pressures of 25 kPa result in a decrease in aldol dimer formation rates. The rate of MP production evaluated on Al-MCM-41 also increased in the presence of 5 kPa water compared to anhydrous conditions. Propylamine temperature-programmed desorption analyses revealed an increase in Bronsted acid site density when both catalysts were exposed to water, which likely accounts for the observed enhancement in aldol condensation reactivity under hydrous conditions. Reversibility testing of the water vapor effect under reaction conditions, combined with X-ray diffraction analysis of fresh, spent, and regenerated catalysts, revealed no structural changes in either aluminosilicate upon exposure to water or reaction conditions. The rates of aldol condensation and the impact of water vapor were highly consistent across both materials, suggesting that zeolite crystallinity has minimal influence on the catalytic performance.

acid catalysts↗

DOE OSTI2020

Thermal Activation of a Copper-Loaded Covalent Organic Framework for Near-Ambient Temperature Hydrogen Storage and Delivery

Copper(II) formate is efficiently incorporated into the pores of a 2D imine-based covalent organic framework (COF) via coordination with the phenol and imine groups. The coordinated metal ion is then reduced to Cu(I) with a thermal treatment that evolves CO 2 . After loading with hydrogen gas, the majority of H 2 desorbs from the coordinatively saturated Cu(II) COF at temperatures < -100 degrees C. However, the activated Cu(I) COF retains adsorbed H 2 above room temperature. Adsorption/desorption of H 2 was highly reversible. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) strongly supports a molecular hydrogen interaction with Cu(I). A Kissinger analysis of variable ramp rate desorption experiments estimates the enthalpy of H 2 desorption from Cu(I) at 15 kJ mol -1 . The results represent an advance toward practical H 2 storage and delivery in a lightweight, stable, and highly versatile material.

08 HYDROGEN↗

DOE OSTI2025

Solvent Dynamics in Gel Polymer Electrolytes for Lithium–Sulfur Batteries

Li−sulfur (Li−S) batteries are promising as the next-generation energy storage technology but face challenges due to sluggish sulfur redox reaction (SRR) kinetics and a sulfur shuttling effect. While many studies have explored polycaprolactone (PCL)-based gel polymer electrolytes (GPEs) to address these issues, the influence of solvent properties, including dielectric constant (ϵ) and donor and acceptor numbers (DN and AN), remain unexplored despite their critical impact on performance and full-scale implementation. This study systematically compares three distinct electrolytes, dimethoxyethane (DME), dimethyl sulfoxide (DMSO), and tetraethylene glycol dimethyl ether (TEGDME)-paired with PCL, to correlate the varied solvent properties and their effects on the physical properties of the GPE, in terms of Li + transport and solvation, and polysulfide’s confinement. Among them, the DME-based GPE, with an intermediate DN, exhibited the lowest crystallinity (2.31%), highest ionic conductivity (7.49 mS/cm), and high Li + transference number (0.77). As a result, it achieved a specific capacity of 795 mAh/g sulfur and an average Coulombic efficiency of 97.5% after 120 cycles at C/5, outperforming its competitors. Operando Raman and UV−vis spectroscopy confirmed that PCL effectively confines long-chain polysulfides within its network, mitigating the shuttle effect and facilitating reversible polysulfide conversion. These findings demonstrate that GPEs with moderate DN values and balanced ϵ significantly enhance stability, extend cycle life, and improve rate performance for Li−S batteries. This work provides valuable insights into the design of advanced electrolyte systems for practical energy storage applications.

25 ENERGY STORAGE↗

DOE OSTI2019

Observing the colloidal stability of iron oxide nanoparticles in situ

Colloidal processes such as nucleation, growth, ripening, and dissolution are fundamental to the synthesis and application of engineered nanoparticles, as well as numerous natural systems. In nanocolloids consisting of a dispersion of nanoparticles in solution, colloidal stability is in?uenced by factors including the particle surface facet and capping layer, and local temperature, chemistry, and acidity. In this paper, we investigate colloidal stability through the real-time manipulation of nanoparticles using in situ liquid cell Scanning Transmission Electron Microscopy (STEM). In a distribution of uniform iron oxide nanoparticles, we use the electron beam to precisely control the local chemistry of the solution and observe the critical role that surface chemistry plays in nanoparticle stability. By functionalizing the nanoparticle surfaces with charged amino acids and peptides, stability can be tuned to promote dissolution, growth, or agglomeration, either permanently or reversibly. STEM imaging is used to quantify kinetics of individual nanoparticles subject to local variations in chemistry. These measurements of dissolution and growth rates of iron oxide nanoparticles provide insights into nanoparticle stability relevant to synthesis and functionalization for biomedical applications.

Hufschmid, Ryan D.↗

DOE OSTI2021

Particle charge distributions in the effluent of a flow-through atmospheric pressure low temperature plasma

Atmospheric pressure low-temperature plasmas are often utilized to perform particle synthesis, treatment, and removal. It is well-known that dust particles are highly negatively charged in these plasmas; however, little is known about dust particle charging behavior as particles leave the plasma volume and pass through the spatial afterglow region. In this work, monodisperse particles of various sizes and work functions were introduced into an atmospheric pressure radiofrequency capacitively coupled flow-through plasma. Dust particle electrical mobility distributions downstream of the flow-through plasma were measured utilizing a differential mobility analyzer in conjunction with a condensation particle counter at various gas flow velocities. Charge distributions were determined from the measured electrical mobility distributions. Experiments confirm that particles become less negatively charged, and even net-positively charged after leaving the plasma volume, with a distribution that follows a shifted Boltzmann charge distribution. Additionally, particle charge in the effluent of the flow-through plasma is negligibly dependent on work function but highly size and flow velocity dependent. Larger particles were shown to have a higher magnitude of charge under all studied conditions; however, particle polarity was switchable by varying gas flow velocity. The charging dynamics were simulated utilizing a constant number Monte Carlo model that accounts for electron temperature decay and the transition from ambipolar to free diffusion of electrons and ions in the spatial afterglow. Simulation results also suggest that, at the same flow velocity, larger particles obtain a greater magnitude of charge, negative or positive. Furthermore, the decrease in electron mobility and the difference between ion and electron convective loss rates create an ion-rich region in the plasma effluent that promotes ion–particle collisions and drives particle charge removal and even reversal of polarity. Larger particles more favorably collide with energetic species in these environments, which results in higher charge states.

atmospheric pressure low temperature plasma↗

DOE OSTI2024

Discovering neutrino tridents at the Large Hadron Collider

Neutrino trident production of dilepton pairs is well recognized as a sensitive probe of both electroweak physics and physics beyond the Standard Model. Although a rare process, it could be significantly boosted by such new physics, and it also allows the electroweak theory to be tested in a new regime. We demonstrate that the forward neutrino physics program at the Large Hadron Collider offers a promising opportunity to measure for the first time, dimuon neutrino tridents with a statistical significance exceeding 5 σ , improving on the previous claims at the ∼ 3 σ level by the CHARM-II and CCFR collaborations while accounting for additional backgrounds later identified by the NuTeV collaboration. We present predictions for various proposed experiments and outline a specific experimental strategy to identify the signal and mitigate backgrounds, based on “reverse tracking” dimuon pairs in the FASER ν 2 detector. We also discuss prospects for constraining beyond Standard Model contributions to neutrino trident rates at high energies. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2019

Posttranslational Methylation of Arginine in Methyl Coenzyme M Reductase Has a Profound Impact on both Methanogenesis and Growth of Methanococcus maripaludis

Catalyzing the key step for anaerobic production and/or oxidation of methane and likely other short-chain alkanes, methyl coenzyme M reductase (Mcr) and its homologs play a key role in the global carbon cycle. The McrA subunit possesses up to five conserved posttranslational modifications (PTMs) at its active site. It was previously suggested that methanogenesis marker protein 10 (Mmp10) could play an important role in methanogenesis. To systematically examine its physiological role, in this work, mmpX (locus tag MMP1554), the gene encoding Mmp10 in Methanococcus maripaludis, was deleted with a new genetic tool, resulting in the complete loss of the 5-C-(S)-methylarginine PTM of residue 275 in the McrA subunit. When the ΔmmpX mutant was complemented with the wild-type gene expressed by either a strong or a weak promoter, methylation was fully restored. Compared to the parental strain, maximal rates of methane formation by whole cells were reduced by 40 to 60% in the ΔmmpX mutant. The reduction in activity was fully reversed by the complement with the strong promoter. Site-directed mutagenesis of mmpX resulted in a differential loss of arginine methylation among the mutants in vivo, suggesting that activities of Mmp10 directly modulated methylation. R 275 was present in a highly conserved PXRR 275 (A/S)R(G/A) signature sequence in McrAs. The only other protein in M. maripaludis containing a similar sequence was not methylated, suggesting that Mmp10 is specific for McrA. In conclusion, Mmp10 modulates the methyl-Arg PTM on McrA in a highly specific manner, which has a profound impact on Mcr activity.

03 NATURAL GAS↗

DOE OSTI2025

Investigation of design principles for metal-binding and conductive protein assemblies

Throughout the lifetime of this initiative, including renewals, we focused on understanding the fundamental principles of protein-protein interface design that enable predictable and modular spatial and kinetic control of multi-component protein self-assembly in 1D, 2D, and 3D, including the interface with inorganic materials, small molecules, and metal ions. We designed individual protein components that bind specific metal ions, including REEs and transport ions across lipid membranes. We created helical 1D filaments of repeating units with programmed periodicity, pitch, and multi-component environmentally responsive self-assembling protein fibers. We showed that these filaments reversibly assemble and disassemble under specific pH conditions and created end-specific caps that independently tune the balance of attachment and detachment rates at each terminus of the filament. Using similar filaments, we succeeded in binding arrays of heme and chlorophyll molecules and assembling patterned helical coatings around carbon nanotubes in efforts to create de novo conductive nanowires. By arraying REE binding sites in a large circular tandem array with a repeat protein-based cyclic oligomer, we created a molecular scaffold for superradiance and paramagnetic quantum sensing. We created a range of one-component and two-component self-assembling 2D arrays and showed that when designed to engage cell receptors, these arrays can control cell behavior from outside the cell signal to inside the cell. We designed helical repeat proteins with variable lengths displaying charged residues in a pattern matched to the cation lattice of mica. achieved a range of ordered states with an epitaxial match to the underlying crystal lattice. We further applied the learned principles of protein-induced biomineralization to design proteins with an interface lattice matching CaCO 3 and guide the formation of specific crystal forms of CaCO 3 from solution, a significant advance toward the global need to manage carbon. In all cases of mineral lattice matching and biomineralization, we followed assembly using molecularly resolved in situ AFM imaging and extracted information about assembly pathways and energetics, applying deep learning to quantify the dynamics of protein self-organization. We developed techniques for using dynamic metal-dependent interfaces on protein nanopores for discriminatively sensing dilute REEs in solution and demonstrated the use of strong metal-binding interfaces to drive nanocage disassembly for conditional nanocompartmentalization applications. This grant supported 11 people, including Asim Bera, Evans Brackenbrough, Andrew Borst, Nikita Hanikel, Timothy Huddy, Emily Joyce, Alex Young-Seug Kang, Ryan Kibler, Joshua Morris Lubner, Harley Pyles, and Shuai Zhang. The research effort culminated in the production of published papers and theses. Electronic Thesis/Dissertation are distributed by ProQuest/UMI Dissertation Publishing and made available on an open access basis through UW Libraries ResearchWorks Service.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Discovering neutrino tridents at the Large Hadron Collider

Neutrino trident production of di-lepton pairs is well recognized as a sensitive probe of both electroweak physics and physics beyond the Standard Model. Although a rare process, it could be significantly boosted by such new physics, and it also allows the electroweak theory to be tested in a new regime. We demonstrate that the forward neutrino physics program at the Large Hadron Collider offers a promising opportunity to measure for the first time, dimuon neutrino tridents with a statistical significance exceeding $5\sigma$. We present predictions for various proposed experiments and outline a specific experimental strategy to identify the signal and mitigate backgrounds, based on "reverse tracking" dimuon pairs in the FASER$\nu$2 detector. We also discuss prospects for constraining beyond Standard Model contributions to neutrino trident rates at high energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗