Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “resistivity measurements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Superconductivity and phase diagrams of CaK(Fe 1- x Mn x ) 4 As 4 single crystals

In order to study the effects of Mn substitution on the superconducting and magnetic ground state of CaKFe 4 As 4 (T c = 35 K), members of the CaK (Fe 1–x Mn x ) 4 As 4 series have been synthesized by high-temperature solution growth in single-crystalline form and characterized by elemental analysis, thermodynamic, and transport measurements. These measurements show that the superconducting transition temperature decreases monotonically and is finally suppressed below 1.8 K as x is increased from 0 to 0.036. For x values greater than 0.016, signatures of a magnetic transition can be detected in both thermodynamic and transport measurements in which kinklike features allow for the determination of the transition temperature T* that increases as Mn substitution increases. Here, a temperature-composition (T–x) phase diagram is constructed, revealing a half-dome of superconductivity with the magnetic transition temperature T* appearing near 26 K for x ~ 0.017 and rising slowly up to 33 K for x ~ 0.036. In addition to the creation of the T–x phase diagram for CaK(Fe 1–x Mn x ) 4 As 4 , specific-heat data are used to track the jump in specific heat at T c ; the CaK(Fe 1–x Mn x ) 4 As 4 data do not follow the scaling of ΔC p with $T$$^{3}_{c}$ as many of the other Fe-based superconducting systems do. These data suggest that, as magnetic pair breaking is present, the jump in C p for a given T c is reduced. Elastoresistivity coefficients 2m 66 and m 11 – m 12 as a function of temperature are also measured. 2m 66 and m 11 – m 12 are qualitatively similar to CaK(Fe 1–x Ni x ) 4 As 4 . This may indicate that the magnetic order in Mn-substituted system may be still the same as CaK(Fe 1–x Mn x ) 4 As 4 . Superconductivity of CaK(Fe 1–x Mn x ) 4 As 4 is also studied as a function of magnetic field. A clear change in H' c2 (T)/T c , where H' c2 (T) is dH' c2 (T)/dT, at x ~ 0.015 is observed and probably is related to change of the Fermi surface due to magnetic order. Coherence lengths and the London penetration depths are also calculated based on H c1 and H c2 data. Coherence lengths as the function of x also show the changes near x = 0.015, again consistent with Fermi-surface changes associated with the magnetic ordering seen for higher-x values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

A-type antiferromagnetic order in semiconducting EuMg 2 Sb 2 single crystals

Eu-based Zintl-phase materials EuA 2 Pn 2 (A = Mg, In, Cd, Zn; Pn = Bi, Sb, As, P) have generated significant recent interest owing to the complex interplay of magnetism and band topology. Here, we investigated the crystallographic, magnetic, and electronic properties of the layered Zintlphase single crystals of EuMg 2 Sb 2 with the trigonal CaAl 2 Si 2 crystal structure (space group $P\bar{3}m1$). Electrical resistivity measurements complemented with angle-resolved photoemission spectroscopy (ARPES) studies and density functional theory (DFT) calculations find an activated behavior with intrinsic conductivity at high temperatures indicating a semiconducting electronic ground state with a narrow energy gap of 370 meV. Magnetic susceptibility and zero-field heat capacity measurements indicate that the compound undergoes antiferromagnetic (AFM) ordering at the Néel temperature T N = 8.0(2) K. Here, zero-field neutron-diffraction measurements reveal that the AFM ordering is A-type where the Eu spins (Eu 2+ , S = 7/2) arranged in ab-plane layers are aligned ferromagnetically in the ab plane and the Eu spins in adjacent layers are aligned antiferromagnetically. Eu-moment reorientation within the ab planes in the trigonal AFM domains associated with a very weak inplane magnetic anisotropy is also evident below T N at low fields < 0.05 T. Although isostructural semimetallic EuMg 2 Bi 2 is reported to host Dirac surface states, the observation of narrow-gap semiconducting behavior in EuMg 2 Sb 2 implies a strong role of spin-orbit coupling (SOC) in tuning the electronic states of these materials. Our DFT studies also suggest, besides the SOC, the more electronegative and smaller Sb than Bi shifts the low-lying conduction bands along the Γ-A direction to higher energy, resulting in an indirect bulk band gap between the Γ and M points for EuMg 2 Sb 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High critical field superconductivity at ambient pressure in MoB 2 stabilized in the P6/mmm structure via Nb substitution

Recently it was discovered that, under elevated pressures, MoB 2 exhibits superconductivity at a critical temperature T c as high as 32 K. The superconductivity appears to develop following a pressure-induced structural transition from the ambient pressure $\text{R}\bar{3}$⁢m structure to an MgB 2 -like P6/mmm structure. This suggests that remarkably high T c values among diborides are not restricted to MgB 2 as previously appeared to be the case, and that similarly high T c values may occur in other diborides if they can be coerced into the MgB 2 structure. In this paper, we show that density functional theory calculations indicate that phonon free energy stabilizes the P6/mmm structure over the $\text{R}\bar{3}$⁢m at high temperatures across the Nb 1–x ⁢Mo x B 2 series. X-ray diffraction confirms that the synthesized Nb-substituted MoB 2 adopts the MgB 2 crystal structure. Finally, high magnetic field electrical resistivity measurements and specific heat measurements demonstrate that Nb x ⁢Mo 1–x⁢ B 2 exhibits superconductivity with T c as high as 8 K and critical fields approaching 6 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Optical conductivity and vibrational spectra of the narrow-gap semiconductor FeGa 3

Intermetallic narrow-gap semiconductors have been intensively explored due to their large thermoelectric power at low temperatures and a possible role of strong electronic correlations in their unusual thermodynamic and transport properties. Here we study the optical spectra and vibrational properties of FeGa 3 . The optical conductivity indicates that FeGa 3 has a direct band gap of ≈ 0.7 eV, consistent with density functional theory (DFT) calculations. Most importantly, we find a substantial spectral weight also below 0.4 eV, which is the energy of the indirect (charge) gap found in resistivity measurements and ab initio calculations. We find that the spectral weight below the gap decreases with increasing temperature, which indicates that it originates from the impurity states and not from the electronic correlations. Interestingly, we did not find any signatures of the impurity states in vibrational spectra. The infrared and Raman vibrational lines are narrow and weakly temperature dependent. The vibrational frequencies are in excellent agreement with our DFT calculations, implying a modest role of electronic correlations. Narrow Mössbauer spectral lines also indicate high crystallinity of the sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Vortex phase diagram of the kagome superconductor CsV 3 ⁢Sb 5

The screening response of the kagome superconductor CsV 3 ⁢Sb 5 was obtained from high-resolution ac mutual inductance measurements. At zero applied magnetic field and low temperatures, we observe no evidence for gapless quasiparticles, while near T c we find evidence for enhanced fluctuations. A rich vortex state appears above H c⁢1 ≈30 Oe, exhibiting successive emergence of vortex phases. For a fixed magnetic field, lowering the temperature below T c⁡ (H) leads to a wide range of vortex liquid state in a landscape of weak pinning potential, which gives rise to an irreversibility line. Further lowering the temperature, we identify the vortex melting line followed by the peak effect manifested in enhanced vortex pinning strength and critical current. Finally, we suggest that such an unusual behavior, where the peak effect region is fully contained within the vortex lattice state below the irreversibility line, is a consequence of the strong anisotropy and weak bulk pinning in CsV 3 ⁢Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Multimodal synchrotron x-ray diffraction across the superconducting transition of Sr 0.1 Bi 2 Se 3

Here, in the doped topological insulator Sr x Bi 2 ⁢Se 3 , a pronounced in-plane twofold symmetry is observed in electronic properties below the superconducting transition temperature T c ~ 3 K, despite the threefold symmetry of the observed $R\overline{3}m$ space group. The axis of twofold symmetry is nominally pinned to one of three rotationally equivalent crystallographic directions and crystallographic strain has been proposed to be the origin of this pinning. We carried out multimodal synchrotron diffraction and resistivity measurements down to and in magnetic fields up to 45 kG on a single crystal of to probe the effect of superconductivity on the crystallographic distortion. Our results indicate that there is no in-plane crystallographic distortion at the level of 1 x 10 -5 associated with the superconducting transition. These results further support the model that the large twofold in-plane anisotropy of superconducting properties of Sr x Bi 2 ⁢Se 3 is not structural in origin, but electronic, namely, it is caused by a nematic superconducting order parameter of E u symmetry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Random-exchange Heisenberg behavior in the electron-doped quasi-one-dimensional spin-1 chain compound AgVP 2 ⁢S 6

Recent theoretical work suggests that a pair-density wave superconducting state can be realized by doping a one-dimensional spin-1 chain. Here, we report the physical properties of single crystals of Mg x Ag 1–x VP 2 S 6 [x = 0, x = 0.017(6), x = 0.067(8), and 0.098(11)] prepared by solid-state synthesis. Single-crystal x-ray-diffraction measurements confirm that Mg 2+ is substituting for Ag + to electron dope the V 3+ zigzag chains. Magnetization measurements reveal that electron doping breaks up the V 3+ chains, resulting in unpaired spins at the chain ends. The Mg x Ag 1–x VP 2 S 6 series is consistent with random-exchange Heisenberg antiferromagnetic chain behavior and can be well described by the exchange-coupled pair model at low temperatures. As a result, transport measurements show Mg x Ag 1–x VP 2 S 6 remains insulating in the range 0 ≤ x ≤ 0.098(11), with the band gap decreasing to ~ 0.2 eV at x = 0.098(11).

1-dimensional spin chains↗
DOE OSTI2021

Capping layer influence and isotropic in-plane upper critical field of the superconductivity at the FeSe / SrTiO 3 interface

Understanding the superconductivity at the interface of FeSe/SrTiO 3 is a problem of great contemporary interest due to the significant increase in critical temperature (T c ) compared to that of bulk FeSe, as well as the possibility of an unconventional pairing mechanism and topological superconductivity. We report a study of the influence of a capping layer on superconductivity in thin films of FeSe grown on SrTiO 3 using molecular beam epitaxy. We used in vacuo four-probe electrical resistance measurements and ex situ magnetotransport measurements to examine the effect of three capping layers that provide distinct charge transfer into FeSe: insulating FeTe, nonmetallic Te, and metallic Zr. Our results show that FeTe provides an optimal cap that barely influences the inherent T c found in pristine FeSe/SrTiO 3 , while the transfer of holes from a nonmetallic Te cap completely suppresses superconductivity and leads to insulating behavior. Finally, we used ex situ magnetoresistance measurements in FeTe capped FeSe films to extract the angular dependence of the in-plane upper critical magnetic field. Our observations reveal an almost isotropic in-plane upper critical field, providing insight into the symmetry and pairing mechanism of high-temperature superconductivity in FeSe.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tuning the flat bands of the kagome metal CoSn with Fe, In, or Ni doping

We report CoSn is a Pauli paramagnet with relatively flat d bands centered about 100 meV below the Fermi energy, E F . Single crystals of CoSn lightly doped with Fe, In, or Ni are investigated using x-ray and neutron scattering, magnetic susceptibility and magnetization, AC susceptibility, specific heat, and resistivity measurements. Within the rigid-band approximation, hole doping with a few percent of Fe or In should move the flat bands closer to E F , whereas electron doping with Ni should move the flat bands further away from E F . We provide evidence that this indeed occurs. Fe and In doping drive CoSn toward magnetism, while Ni doping suppresses CoSn's already weak magnetic response. The resulting ground state is different for Fe versus In doping. For Fe-doped crystals, Co 1-x Fe x Sn, with 0.02< x <0.27, the magnetic and specific-heat data are consistent with the formation of a spin glass, with a glass temperature, T g , ranging from 1 K for x = 0.02 to 10 K for x = 0.27. Powder and single-crystal neutron diffraction found no evidence of long-range magnetic order below T g for samples with x ≈ 0.17. For In-doped crystals, CoSn 1-y In y , both the magnetic susceptibility and the Sommerfeld coefficient, γ, increase substantially relative to pure CoSn, but with no clear indication of a magnetic transition for 0.05< y <0.2. CoSn crystals doped with Ni (Co 0.93 Ni 0.07 Sn) have a significantly smaller magnetic susceptibility and γ than pure CoSn, consistent with flat bands further from E F .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Differences in the resistive and thermodynamic properties of the single crystalline chiral superconductor candidate SrPtAs

The locally noncentrosymmetric superconductor SrPtAs is proposed to host a topological chiral d-wave state, but experimental reports have been limited to polycrystalline samples. Here we report the synthesis of single crystalline SrPtAs grown from Pb flux. SrPtAs crystallizes in the hexagonal space group P⁢6 3 /mmc with lattice parameters a=4.2445⁢(4) Å and c=8.9513⁢(18) Å. Additionally, magnetic susceptibility and electrical resistivity measurements reveal a superconducting transition at T c ~2.2 K, in agreement with previous reports on polycrystalline samples. Surprisingly, heat capacity data show only a small bulk transition at 0.7 K. We discuss the possible origins of the discrepancy between the various measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Structural transition and anisotropic magnetism in disordered Zintl phase Eu 7 Ga 6 Sb 8

Single crystals of the Zintl compound Eu 7 Ga 6 Sb 8 were synthesized using a Ga-Sb flux. We report the temperature (T) and magnetic field (H) dependence of the magnetic susceptibility (χ), magnetization (M), resistivity (ρ), specific heat (C), and thermal expansion (α). We also report high-resolution powder x-ray diffraction data that support a structural phase transition with accompanying signatures seen in C(T), ρ(T), and α(T). We find Eu 7 Ga 6 Sb 8 exhibits antiferromagnetic ordering at T N1 = 9.0 K from anomalies seen in χ(T), C(T), and α(T), as well as a potential reorientation of Eu 2+ spins at T N2 = 7.5 K and T N3 = 7.2 K. In conclusion, density functional theory calculations predict Eu 7 Ga 6 Sb 8 to be semiconducting; however, electrical resistivity measurements show bad-metal behavior that indicates the presence of disorder.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Atomic structure and formation mechanism of a newly discovered charge density wave in the m = 2 monophosphate tungsten bronze

The m = 2 member of the monophosphate tungsten bronze family had been thought to be the only one without an electronic instability at low temperature. In this paper, we report the discovery of a charge density wave phase in this compound, with a transition temperature of 290 K and an incommensurate modulation vector q = 0.245b* + ξc*, which reaches a lock-in with a commensurate vector at 130 K. The presence of this new phase is confirmed by diffraction and resistivity measurements. Pre-transitional dynamics are investigated using diffuse and inelastic X-ray scattering, revealing a clear Kohn anomaly. We analyze both structural and electronic contributions to the phase transition, providing a comprehensive picture of the mechanism driving this newly identified instability.

Minelli, Arianna [ORNL] (ORCID:0000000283103712)↗
DOE OSTI2019

SOI-MEMS Bulk Piezoresistive Displacement Sensor: A Comparative Study of Readout Circuits

Performance of several readout circuits, when applied to a MEMS-based bulk piezoresistive displacement sensor is compared in this study. The sensor comprises a pair of tilted clamped-guided silicon beams whose bulk piezoresistivity is used for displacement sensing. Wheatstone half-bridge, constant-voltage, and constant-current circuits are implemented to measure resistance changes of this sensor. We report full characterization of the sensor with these circuits and explore the sensor’s important characteristics such as linearity, bandwidth, and noise. The results reveal that the constant-current circuit provides the highest sensitivity at equal-power bias condition. Here, we find that the resolution of the sensor is degraded from 1.6 nm with the Wheatstone half-bridge and constant-voltage circuits to about 4.2 nm with the constant-current configuration. In the frequency domain, the sensor captures the full dynamics of the MEMS nanopositioner up to 20 kHz with all readout circuits.

42 ENGINEERING↗
DOE OSTI2021

Copper Electrode on Flexible Substrate by Intense Pulsed Light Sintering of Microsized Copper Particles

Metal electrodes deposited in a grid pattern onto flexible polymer substrates have been shown to be a viable alternative to replace indium tin oxide (ITO) as the transparent anode for organic photovoltaics. copper may be a better alternative in terms of cost and stability for large area low-cost solar modules, specifically on roll-to-roll platforms. These customized electrode patterns can be fabricated from copper nanoparticles through various printing techniques applicable to solution phase processing. The Intense Pulsed Light (IPL) technique has been used to sinter copper nanoparticles (~100nm) to fabricate conductive copper electrodes on flexible polymer substrates. However, compared to nanosized (~100 nm) copper particles, microsized (~2 um) copper is much cheaper. In this work, microsized (~2 um) copper is used to produce high conductive copper inks. The conductivity of the print can be adjusted through the use of surfactant. IPL sintering was optimized to obtain high conductivity copper films. In conclusion, several microscopic and electrical spectroscopic characterization techniques such as scanning electron microscopy (SEM), x-ray diffraction (XRD), 4-point probe resistivity measurements were employed to characterize the copper electrodes.

14 SOLAR ENERGY↗
DOE OSTI2024

Rapid Characterization and Statistical Analysis of High-Volume Field-Harvested Photovoltaic Connectors

Photovoltaic (PV) installations heavily depend on connectors for efficient module and string interconnections without requiring skilled labor. Yet this seemingly innocuous component of PV systems is a leading cause of module failures, multiple high-profile fires, and lawsuits in the PV industry. This work aims to answer critical questions regarding why connectors fail and the contributing factors to their failure. The study involves collecting and analyzing more than 17,000 field-harvested connectors from various solar installations across the United States. The vast dataset, which includes connector metadata, visual inspections, and resistance measurements, provides unprecedented insight into the state of health of PV connectors across the US, including the geographic locations, connector types, and installation practices most prone to failures. The work presented here describes a novel rapid characterization method for processing large numbers of connectors and is supported by parallel forensic analysis to discern the root causes of failures as well as a levelized cost of lifetime model to determine the economic ramifications of connector failure. Ultimately, the findings may inform PV developers about the best practices to extend connector longevity and lead to more resilient and reliable PV systems.

connectors↗
DOE OSTI2023

Melt-grown semi-insulating Mn:β-Ga 2 O 3 single crystals exhibiting unique visible absorptions and luminescence

In this study, several acceptor dopants have been explored in β-Ga 2 O 3 to produce semi-insulating substrates and epitaxial films. Fe and Mg make up the majority of research thus far; however, other transition metals provide potential alternatives for optimized performance. β-Ga 2 O 3 bulk single crystals were grown by the Czochralski and vertical gradient freeze methods with a nominal dopant concentration of 0.25 at. % Mn. Ultraviolet-visible-near infrared spectroscopy and photoluminescence revealed polarization- and orientation-dependent optical absorptions (pleochroism) coupled with an orange luminescence. All samples were electrically insulating, on the order of 10 9 –10 11 ohm cm at room temperature, indicative of acceptor doping. Actual dopant concentrations of the intentionally doped transition metal and background impurities were determined via glow discharge mass spectrometry, indicating the macroscale segregation behavior. High-temperature resistivity measurements indicated an experimental acceptor level of 1.7 ± 0.2 eV. Hydrogenation of samples resulted in an increase in the orange luminescence and O–H stretching modes observable in the infrared spectrum. Density functional theory calculations were performed to determine the likely site-occupancy and acceptor level of Mn in the bandgap.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nematicity and competing orders in superconducting magic-angle graphene

Strongly interacting electrons in solid-state systems often display multiple broken symmetries in the ground state. The interplay between different order parameters can give rise to a rich phase diagram. We report on the identification of intertwined phases with broken rotational symmetry in magic-angle twisted bilayer graphene (TBG). Using transverse resistance measurements, we find a strongly anisotropic phase located in a “wedge” above the underdoped region of the superconducting dome. Upon its crossing with the superconducting dome, a reduction of the critical temperature is observed. Furthermore, the superconducting state exhibits an anisotropic response to a direction-dependent in-plane magnetic field, revealing nematic ordering across the entire superconducting dome. These results indicate that nematic fluctuations might play an important role in the low-temperature phases of magic-angle TBG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Quantifying Percolated Triple Phase Boundary Density and Its Effects on Anodic Polarization in Ni-Infiltrated Ni/YSZ SOFC Anodes

Increasing the density of percolated triple phase boundaries (TPBs) by infiltrating nanoscale electrocatalysts can improve the performance of solid oxide fuel cell (SOFC) anodes. However, the complex microstructure of these infiltrated nanocatalysts creates challenges in quantifying their role in anode performance improvements. In this research, scanning electron microscopy of fractured cross-sections of a Ni-nanocatalyst infiltrated anodic symmetric cell along with three-dimensional (3-D) reconstruction of the same anode have been used to quantify the changes in percolated TPB densities due to infiltration. This change in percolated TPB density has been compared to the improvement in anode activation polarization resistance measured by electrochemical impedance spectroscopy (EIS). It was found that increased TPB densities only partially accounted for the measured performance improvement. Distribution of relaxation times (DRT) analyses showed that a reduction in the time constants of the catalytic processes in the anode also play a role, suggesting that the added nanoscale percolated TPB boundaries are more electrochemically active as compared to the cermet TPB boundaries.

25 ENERGY STORAGE↗