Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reanalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Stratospheric Intrusion-Influenced Ozone Air Quality Exceedences Investigated in MERRA-2

Ozone near the surface is harmful to human health and is a result of the photochemical reaction with both man-made and natural precursor pollutant sources. Therefore, in order to reduce near surface ozone concentrations, communities must reduce anthropogenic pollution sources. However, the injection of stratospheric ozone into the troposphere, known as a stratospheric intrusion, can also lead to concentrations of ground-level ozone exceeding air quality standards. Stratospheric intrusions are dynamical atmospheric features, however, these intrusions have been misrepresented in models and reanalyses until recently, as the features of a stratospheric intrusion are best identified in horizontal resolutions of approximately 50 km or smaller. NASA's Modern-Era Retrospective Analysis for Research and Applications Version-2 (MERRA-2) reanalysis is a publicly-available high-resolution dataset (~50 km) with assimilated ozone that characterizes stratospheric ozone on the same spatiotemporal resolution as the meteorology. We show that stratospheric intrusions that impact surface air quality are well represented in the MERRA-2 reanalysis. This is demonstrated through a case study analysis of stratospheric intrusion events which were identified by the United States Environmental Protection Agency (EPA) to impact surface ozone air quality in spring 2012 in Colorado. The stratospheric intrusions are identified in MERRA-2 by the folding of the dynamical tropopause under the jet stream and subsequent isentropic descent of dry, O3-rich stratospheric air towards the surface where ozone air quality exceedences were observed. The MERRA-2 reanalysis can support air quality agencies for more rapid identification of the impact of stratospheric air on ground-level ozone.

Knowland, K. Emma↗

The Viability of Trajectory Analysis for Diagnosing Dynamical and Chemical Influences on Ozone Concentrations in the UTLS

The viability of trajectory analysis for diagnosing the interplay between chemistry and dynamics is investigated by comparing ozone mixing ratios modelled using air-parcel pathways to values observed along flight tracks during ATTREX (Airborne Tropical TRopopause EXperiment). Trajectories are initiated at the locations of ozone observations and tracked backward in time to their sources at termini of backward trajectories. The modelled values of ozone utilize 3-dimensional analysis fields from WACCM (Whole Atmosphere Community Climate Model) (a chemical-climate model with dynamical fields nudged towards MERRA (Modern-Era Retrospective Analysis and Research Applications) reanalysis) and ERA-interim (product of ECMWF - the European Centre for Medium-Range Weather Forecasts) to determine source mixing ratios with chemical production and loss terms derived from the ozone chemistry used in WACCM. A statistical base of modelled ozone is constructed with 6 trajectory platforms (adiabatic, diabatic, and kinematic forced by ERA-interim and MERRA), two chemical models (WACCM chemistry and no chemistry), and 4 trajectory lengths (5, 10, 20, and 30 days). Linear regression is employed to separate systematic errors from random errors and to characterize the impact of source mixing ratios, path length, vertical motion, and chemistry on modelled ozone errors. Errors in the analysis ozone fields are large, if not dominant, contributors to model error. Random errors are particularly large for point-by-point comparisons, however averaging over 800 km (75 minutes) flight segments substantially reduces random error and exposes systematic errors. Of the two analysis ozone data sets, WACCM, which incorporates detailed chemistry, provides the smaller systematic errors while ERA-interim, which has crude chemistry but assimilates observational data, has the smaller random errors. Of the different trajectory platforms, adiabatic calculations produce the smaller random errors (irrespective of the use of chemistry) but both vertical motion and chemistry are required to optimally reduce systematic errors. These results suggest that meaningful analysis of dynamical and chemical interactions that control ozone mixing ratios are viable on spatial scales larger than a few reanalysis grid spaces, that errors in the analyzed ozone data sets are large but not prohibitively so, and that vertical velocities and heating rates from reanalysis data, while problematic, contain useful information [on the ozone concentrations in the UTLS (Upper Troposphere/Lower Stratosphere)].

ozone↗

NASA GMAO Integrated Earth System Analysis

An Integrated Earth System Analysis (IESA) is the only possible way to assimilate all the available observations of separate components of the earth system (atmosphere, ocean, cryosphere, land, constituents, etc) into a single consistent Coupled Data Assimilation System (CDAS). The NASA Global Modeling and Assimilation Office (GMAO) is developing an IESA for Reanalysis in an incremental fashion by coupling different components- one at a time, for e.g., the MERRA-2 reanalysis coupled aerosol and meteorological data assimilation systems. Following a similar approach the ocean (including sea-ice) is being coupled to the atmosphere, starting with the air-sea interface. This presentation briefly outlines GMAO's reanalysis road map and summarizes our recent work in that direction.

Akella, Santha↗

The NASA Eulerian Snow on Sea Ice Model (NESOSIM) v1.0: initial model development and analysis

The NASA Eulerian Snow On Sea Ice Model (NESOSIM) is a new, open-source snow budget model that is currentlyconfigured to produce daily estimates of the depth and density of snow on sea ice across the Arctic Ocean throughthe accumulation season. NESOSIM has been developed in a three-dimensional Eulerian framework and includes two(vertical) snow layers and several simple parameterizations (accumulation, wind packing, advection_divergence, blowingsnow lost to leads) to represent key sources and sinks of snow on sea ice. The model is forced with daily inputs of snowfall and near-surface winds (from reanalyses), sea ice concentration (from satellite passive microwave data) and sea ice drift (from satellite feature tracking) during the accumulation season (August through April). In this study, we present the NESOSIM formulation, calibration efforts, sensitivity studies and validation efforts across an Arctic Ocean domain (100 km horizontal resolution). The simulated snow depth and density are calibrated with in situ data collected on drifting ice stations during the 1980s. NESOSIM shows strong agreement with the in situ seasonal cycles of snow depth and density, and shows good (moderate) agreement with the regional snow depth (density) distributions. NESOSIM is run for a contemporary period (2000 to 2015), with the results showing strong sensitivity to the reanalysis derived snowfall forcing data, with the Modern-Era Retrospective analysis for Research and Applications (MERRA) and the Japanese Meteorological Agency 55-year reanalysis (JRA-55) forced snow depths generally higher than ERA-Interim,and the Arctic System Reanalysis (ASR) generally lower. We also generate and force NESOSIM with a consensus "median" daily snowfall dataset from these reanalyses.The results are compared against snow depth estimates derived from NASA's Operation IceBridge (OIB) snow radar data from 2009 to 2015, showing moderate_strong correlations and root mean squared errors of 10 cm depending on the OIB snow depth product analyzed, similar to the comparisons between OIB snow depths and the commonly used modified Warren snow depth climatology. Potential improvements to this initial NESOSIM formulation are discussed in the hopes of improving the accuracy and reliability of these simulated snow depths and densities.

Petty, Alek A.↗

A Global Climatology of Extratropical Transition Part I: Characteristics Across Basins

The authors present a global climatology of tropical cyclones (TCs) that undergo extratropical transition (ET). ET is objectively defined based on a TC's trajectory through the cyclone phase space (CPS), which is calculated using storm tracks from 1979-2017 best-track data and geopotential height fields from reanalysis datasets. Two reanalyses are used and compared for this purpose, the Japanese 55-year Reanalysis and the ECMWF Interim Reanalysis. The results are used to study the seasonal and geographical distributions of storms undergoing ET and inter-basin differences in the statistics of ET occurrence. About 50% of all TCs in the North Atlantic and the Western North Pacific undergo ET. In the southern hemisphere, ET fractions range from about 20% in the South Indian Ocean and the Australian region to 45% in the South Pacific. In the majority of ETs, TCs become thermally asymmetric before forming a cold core. However, a substantial fraction of TCs takes the reverse pathway, developing a cold core before becoming thermally asymmetric. This pathway is most common in the Eastern North Pacific and the North Atlantic. Different ET pathways can be linked to different geographical trajectories and environmental settings. In ETs over warmer sea-surface temperatures, TCs tend to lose their thermal symmetry while still maintaining a warm core. Landfalls by TCs undergoing ET occur 3-4 times per year in the North Atlantic and 7-10 times per year in the Western North Pacific, while coastal regions in the Australian region are affected once every 1-2 years.

Melanie Bieli↗

The Effects of a 1998 Observing System Change on MERRA-2-Based Ozone Profile Simulations

Model simulations of ozone (O3) driven by meteorological reanalyses are useful for filling observational gaps and interpreting observed O3 variability and trends. However, the transport circulation of reanalysis products is impacted by changes to the observing system (the data assimilated into the reanalyses). We examine the impacts of these changes on simulated O3 from two models, Global Modeling Initiative (GMI) Chemistry Transport Model (GMI CTM) and Modern‐Era Retrospective Analysis for Research Applications version 2 (MERRA‐2) GMI Replay (M2 GMI Replay) simulation, using observations from global ozonesondes (>50,000 profiles) and satellites from 1980 to 2016. Both models are constrained by meteorology from the NASA MERRA‐2 reanalysis, and both use versions of NASA's GMI chemical mechanism. We focus on an observing system change affecting simulated O3 after 1998, associated with the assimilation of temperature and humidity data from new microwave profiling satellites. A large post‐1998 O3 increase, mainly confined to 15–20‐km altitude, of ~10 Dobson units (DU) in midlatitudes occurs in the GMI CTM, worsening the bias compared to observations. In contrast, an increase in M2 GMI Replay simulation O3 of ~10 DU is observed only near −60° latitude, reducing the bias compared to observations. The GMI CTM O3 high biases display a Quasi‐Biennial Oscillation (QBO)‐like periodicity that result from excessive transport from the tropical stratosphere to the midlatitude lower stratosphere during the QBO westerly phase. We quantify O3 discontinuities caused by MERRA‐2 observing system changes and demonstrate how the MERRA‐2 Global Modeling Initiative Replay simulation dampens the effects of these changes and QBO‐driven artifacts on simulated lower stratospheric and total O3. We caution against using simulations driven by a reanalysis to derive multidecadal O3 trends, especially prior to 1998.

Replay↗

Evaluation of long-term Northern Hemisphere snow water equivalent products

Nine gridded Northern Hemisphere snow water equivalent (SWE) products were evaluated as part of the European Space Agency (ESA) Satellite Snow Product Intercomparison and Evaluation Exercise (SnowPEx). Three categories of datasets were assessed: (1) those utilizing some form of reanalysis (the NASA Global Land Data Assimilation System version 2 – GLDAS-2; the European Centre for Medium-Range Weather Forecasts (ECMWF) interim land surface reanalysis – ERA-Interim/Land and ERA5; the NASA Modern-Era Retrospective Analysis for Research and Applications version 1 (MERRA) and version 2 (MERRA-2); the Crocus snow model driven by ERA-Interim meteorology – Crocus); (2) passive microwave remote sensing combined with daily surface snow depth observations (ESA GlobSnow v2.0); and (3) stand-alone passive microwave retrievals (NASA AMSR-E SWE versions 1.0 and 2.0) which do not utilize surface snow observations. Evaluation included validation against independent snow course measurements from Russia, Finland, and Canada and product intercomparison through the calculation of spatial and temporal correlations in SWE anomalies. The stand-alone passive microwave SWE products (AMSR-E v1.0 and v2.0 SWE) exhibit low spatial and temporal correlations to other products and RMSE nearly double the best performing product. Constraining passive microwave retrievals with surface observations (GlobSnow) provides performance comparable to the reanalysis-based products; RMSE over Finland and Russia for all but the AMSR-E products is ∼50 mm or less, with the exception of ERA-Interim/Land over Russia. Using a seven-dataset ensemble that excluded the stand-alone passive microwave products reduced the RMSE by 10 mm (20 %) and increased the correlation from 0.67 to 0.78 compared to any individual product. The overall performance of the best multiproduct combinations is still at the margins of acceptable uncertainty for scientific and operational requirements; only through combined and integrated improvements in remote sensing, modeling, and observations will real progress in SWE product development be achieved.

Northern Hemisphere snow water equivalent (SWE) pr↗

Effect of Rain-Adjusted Satellite Sea Surface Salinity on ENSO Predictions from the GMAO S2S Forecast System

ENSO has a significant impact on climate variability throughout the world and so has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of altimetry and in situ data lead to improved short-term forecasts of the coupled system. However, few studies have focused on improving the near-surface density/mixing through assimilation of satellite sea surface salinity (SSS). For expediency, most projects that do assimilate SSS do so as if these data were observed at the top model layer instead of at the surface. In rainy regions where buoyant water sits as a fresh lens at the surface, this assumption is likely invalid. Therefore, we adjust SSS so that it more accurately represents the salinity at the first model layer. The Rain Impact Model (RIM) uses a simple diffusion model to determine the near surface salinity gradient (i.e., 1 cm to 5 m). Satellite SSS data are modified using this near-surface salinity gradient, so the salinity values are now valid at the first model layer (we call this SSS@5m). We assess the impact of satellite SSS observations for near-surface dynamics within ocean reanalyses and how these impact dynamical ENSO forecasts using the NASA GMAO S2S coupled system. For all reanalysis experiments, all available along-track sea level and in situ observations are assimilated for 2011 to 2020 using the LETKF scheme (Penny et al., 2013). One reanalysis assimilates Aquarius /SMAP SSS as before. An additional reanalysis is performed assimilating the SSS@5m data. Validation statistics are compared for experiments that assimilate SSS (sub-optimally as before) versus the SSS@5m. We also compare results of coupled forecasts that are initialized from these reanalyses in spring. For all but the big La Niña in 2017, all NINO3.4 forecasts were improved by using the RIM. We will show that improved SSS estimates upgrades density and near-surface mixing leading to more accurate coupled air/sea interaction and better forecasts.

ENSO↗

Surface Shortwave Radiative Fluxes Derived from the U.S. Air Force Cloud Depiction Forecast System World-Wide Merged Cloud Analysis

We present a global-scale evaluation of surface shortwave (SW↓) radiative fluxes as derived with cloud amount information from the U.S. Air Force (USAF) Cloud Depiction Forecast System (CDFS) II World-Wide Merged Cloud Analysis (WWMCA) and implemented in the framework of the NASA Land Information System (LIS). Evaluation of this product is done against ground observations, a satellite-based product from the Moderate Resolution Imaging Spectroradiometer (MODIS), and several reanalysis outputs. While the LIS/USAF product tends to overestimate the SW↓ fluxes when compared to ground observations and satellite estimates, its performance is comparable or better than the following reanalysis products: ERA5, CFSR, and MERRA-2. Results are presented using all available observations over the globe and independently for several regional domains of interest. When evaluated against ground observations over the globe, the bias in the LIS/USAF product at daily time scale was about 9.34 W m −2 and the RMS was 29.20 W m −2 while over the United States the bias was about 10.65 W m −2 and the RMS was 35.31 W m −2 . The sample sizes used were not uniform over the different regions, and the quality of both ground truth and the outputs of the other products may vary regionally. It is important to note that the LIS/USAF is a near-real-time (NRT) product of interest for potential users and as such fills a need that is not met by most products. Due to latency issues, the level of observational inputs in the NRT product is less than in the reanalysis data.

Cloud radiative effects↗

Springtime SEA Air Is Consistently Both Smoky and Humid, but This Relationship (and Its Radiative Effects) Varies Spatially and Seasonally

The atmosphere over the southeast Atlantic Ocean (SEA) sees a consistent springtime biomass burning (BB) smoke from widespread agricultural fires on the African continent. This smoke layer is initially lofted high in a continental mixed layer (~5-6km) and is then transported westward in the free troposphere, where it overlies and ultimately mixes into the SEA stratocumulus-topped oceanic boundary layer. Coincident with this smoke is an elevated humidity signal which is present from the time a given airmass is over the continental source region. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) was a NASA Earth Venture Suborbital mission with the goal of measuring aerosol, cloud, and atmospheric properties over this region during three deployments in September 2016, August 2017, and October 2018. A previous study discussed the spatial characteristics of the water vapor-BB plume observations in the September 2016 flight data and their degree of agreement with several atmospheric reanalyses and models. In the present work, we first discuss atmospheric chemistry, structure, and aerosol results from all three ORACLES deployments to place these results in a broader seasonal context. Despite the differing locations and season of each deployment, we show that there continues to be good agreement between the airborne ORACLES dataset and large-scale reanalyses, specifically the ECMWF ERA5 and CAMS reanalyses. Other reanalyses (specifically NASA's MERRA-2) preserved the observed correlation between meteorology and biomass burning conditions, but, as was seen for 2016, was frequently displaced spatially relative to the observations. The CAMS reanalysis performs better with water vapor than with CO. Results comparing CAMS column AOD to the field measurements show slight overestimates, consistent with previous analysis, but the good relationship observed between AOD and inlet-based aerosol extinction demonstrates this metric's utility to broader studies. The good ERA5/CAMS/ORACLES agreement allows us to next examine the multi-year seasonal patterns and trends beyond the three ORACLES deployment periods. Looking at seven years of reanalysis data for the BB season, we find distinct variations between each month/deployment in terms of vertical smoke distribution and correlation to atmospheric specific humidity, due to changing conditions through the BB season. Using k-means clustering of these climatological reanalysis, we identify six canonical atmospheric profile types of varying total atmospheric humidity and vertical structure and describe their changing incidence spatially and throughout the season, and six analogous profile types for carbon monoxide, allowing us to characterize the atmospheric structure of both vapor and BB over time throughout the SEA region. This classification will allow for a more complete analysis of the broader radiative and dynamical effects of humid aerosols overlying stratocumulus clouds.

Kristina Marie Myers Pistone↗

Using Dual-Regression to Produce 16-Day Average AIRS Soundings

Temperature and humidity profiles are needed to estimate surface radiation budget. The Clouds and the Earth’s Radiant Energy System (CERES) team uses temperature and humidity profiles from a reanalysis product produced by NASA’s Global Modeling and Assimilation Office for surface irradiance computations. Biases and drifts in temperature and humidity profiles in the reanalysis product result in biases and drifts in surface irradiances computed with them. One approach to correct biases and drifts in temperature and humidity profile is to use satellite observations, similar to assimilating instantaneous spectral radiances to correct modeled temperature and humidity profiles. In this work, we use mean spectral radiances to test the possibility of understanding biases in reanalysis mean temperature and humidity profiles. Specifically, we use 16-day mean Atmospheric Infrared Sounder (AIRS) radiances and only use clear-sky spectral radiances with a viewing zenith angle nadir to near-nadir. We use the dual-regression method (Smith et al. 2012) to test whether temperature and humidity profiles retrieved from the 16-day mean spectral radiances agree with the average of temperature and humidity profiles derived from instantaneous spectral radiances. When daytime and nighttime spectral radiances are averaged separately and daytime and nighttime retrievals are performed separately, temperature and humidity profiles derived from the mean spectral radiances agree well with mean temperature and humidity profiles derived from instantaneous spectral radiances. The agreement improves when clouds are further screened to compute 16-day mean clear-sky spectral radiances.

Anthony DiNorscia↗

Improving Ocean Reanalyses and ENSO Forecasts By Assimilation of Rain Corrected Satellite Sea Surface Salinity Using the GMAO S2S Forecast System

During the past years, we have seen that the La Nina to El Nino transition has had a significant global socio-economic impact and so has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of satellite altimetry and subsurface temperature and salinity from (mostly) Argo help to improve the initialization of the thermocline, while satellite Sea Surface Temperature (SST) aids in constraining surface heat-fluxes, leading to improved subseasonal to seasonal forecasts of the coupled system. However, few studies have focused on improving the fresh-water flux and near-surface density and mixing through assimilation of satellite sea surface salinity (SSS). For expediency, the few ocean models that do assimilate SSS bias-correct the satellite SSS data to normalize towards the near-surface Argo data. However, in rainy regions, where buoyant water sits as a fresh lens at the surface, this assumption is likely inadequate. In previous work, we have shown that adjusting SSS data to bulk salinity (Sb) using the Rain Impact Model (RIM) of Santos-Garcia et al., 2014 has improved the near-surface density and mixed layer depth, leading to deeper thermocline and improved the NINO3.4 SST forecasts. Now we utilize the Soil Moisture/Ocean Salinity, Rain Corrected (SMOS_RC) SSS product provided by the Centre Aval de Traitement des données SMOS (CATDS CPDC) to represent the Sb more accurately at first model layer (in our case 5 m). Rather than using a diffusivity model as with RIM, SMOS_RC relies on an observed relationship between the spatial heterogeneity of SMOS SSS and instantaneous rain rate (RR) (Supply et al., 2020). In order to test the impact of SMOS_RC versus SMOS, we compare two reanalyses over the period 2014 to 2021. For both reanalysis experiments, all available along-track absolute dynamic topography and in situ observations are assimilated using the LETKF scheme (Penny et al., 2013). One reanalysis additionally assimilates SMOS SSS data as is (i.e., with the fresh bias), and a separate reanalysis is performed assimilating the SMOS_RC data. We assess the impact for near-surface and subsurface dynamics within ocean reanalyses by validating against observations and explore how SSS assimilation (SMOS versus SMOS_RC) impacts dynamical ENSO forecasts using the NASA GMAO Sub-seasonal to Seasonal coupled forecast system (GEOS S2S-3, Molod et al., 2020, Hackert et al., 2023). We will show that improved SSS estimates and near-surface density and mixing led to more accurate coupled air/sea interaction and better ENSO forecasts.

Eric Hackert↗

Applied Uses of MERRA Reanalyses: Current and Future Prospects

During the initial planning of the Modern Era Retrospective-analysis for Research and Applications (MERRA), the project was envisioned to become a tool for applied sciences and decision makers, as well as weather and climate research. MERRA was the first reanalysis to provide data at 1 hourly frequencies. After discussions with wind energy users, 50m above the surface winds were included in the data collection to begin to represent the environment at the turbine height. MERRA-2 was the first reanalysis to include interactive and assimilated aerosols. From these, PM 1, 2.5 and 10 records have been computed and contribute to the climate and health sector. The US Center for Disease Control is accessing MERRA-2 data for comparison along with their health data. MERRA-2 Extreme Indices have been computed from the high frequency data (e.g. precipitation maxima, heat waves and fire weather). These have been used to characterize the changing extremes in the United States and around the globe as well as the weather associated with the extremes. The next-generation, MERRA-21C, includes increased resolution (25km) and continues to provide innovative Earth system data. For example, a boundary layer collection will provide constant height level data starting at 100m, continuing up to 4000m. This will provide detailed information about the boundary layer processes that greatly affect the biosphere. Chemical tracers for constituents are included in the system. The ensemble data assimilation is run with 32 members, and the variance for critical variables are stored. We will explore the use of this variance as one measure of uncertainty relevant for applied uses, which has not been included in any MERRA reanalysis. We will discuss use case scenarios developed to engage with the energy and financial sectors, to better understand their needs for climate data. Prospects for further downscaling of reanalyses will also be explored.

Michael Bosilovich↗

Incremental Learning for Passive Microwave Precipitation Retrievals using Advanced Technology Microwave Sounder

Spaceborne passive microwave (PMW) radiometry is central to global precipitation monitoring, yet retrieval uncertainties remain substantial, particularly for cross-track sounders whose variable footprints and channel configurations are optimized for atmospheric temperature and moisture profiling rather than precipitation. Consequently, existing operational products often exhibit angular-dependent biases, limited effective swath utilization, unrealistic rainfall probability distributions, and systematic misclassification of precipitation phase. These limitations are further compounded by the scarcity of globally accurate and representative precipitation observations, as training data from the Dual-frequency Precipitation Radar (DPR) and the Cloud Profiling Radar (CPR) are spatially sparse, lack uniform global coverage, and exhibit heterogeneous error characteristics across precipitation regimes. To address these challenges, this study presents a supervised retrieval algorithm that incrementally trains an ensemble of extreme gradient-boosted decision trees by augmenting base learners with pre-training on reanalysis data and post-training on coincident DPR and CPR observations matched with the Advanced Technology Microwave Sounder (ATMS). By transferring prior information from reanalysis to posterior constraints from radar observations and adopting a sequential detection–estimation strategy for precipitation phase and rate retrieval, the proposed approach yields retrievals across the full ATMS swath that are largely free from persistent deficiencies in current Global Precipitation Measurement (GPM) passive microwave operational products. In particular, the method resolves bimodal artifacts in rainfall retrievals and mitigates systematic high-latitude snowfall biases, including overestimation across the Arctic and underestimation across the Antarctic. Validation against independent Multi-Radar Multi-Sensor (MRMS) data over the Contiguous United States (CONUS) further demonstrates improved performance in precipitation phase detection and rate estimation relative to both reanalysis and current GPM PMW products.

Mahyar Garshasbi↗

A Synopsis of AIRS Global-Mean Clear-Sky Radiance Trends From 2003 to 2020

Atmospheric Infrared Sounder (AIRS) aboard the National Aeronautics and Space Administration (NASA) Aqua satellite has been operating since September 2002. Its information content, superb instrument performance, and dense sampling pattern make the AIRS radiances an invaluable data set for climate studies. The trends of global-mean, nadir-view, clear-sky AIRS radiances from 2003 to 2020 are studied here, together with the counterparts of synthetic radiances based on two reanalyzes, European Centre for Medium-Range Weather Forecasts Reanalysis V5 (ECMWF ERA5) and NASA Goddard Earth Observing System V5.4.1 (GEOS-5.4.1; a reanalysis product without assimilation of hyperspectral radiances such as AIRS). The AIRS observation shows statistically significant negative trends in most of its CO2 channels, positive but non-significant trends in the channels over the window regions, and statistically significant positive trends in some of its H2O channels. The best agreements between observed and simulated radiance trends are seen over the CO2 tropospheric channels, while the observed and simulated trends over the CO2 stratospheric channels are opposite. ERA5 results largely agree with the AIRS observation over the H2O channels. The comparison in the H2O channels helps reveal a data continuity issue in the GEOS-5.4.1. Contributions from individual variables to the radiance trends are also assessed by performing separate simulations. This study provides the first synopsis of the global-mean trend of AIRS radiances over all its thermal-IR channels.

CO2↗

An exact zooming method for finite element analyses

An exact zooming technique which employs static condensation and exact structural reanalysis methods was developed. Successive application of static condensation reduces the system to one that is only associated with the degrees of freedom (dof) of the original model. Application of an exact static reanalysis technique permits the displacements at the dof of the original model that are contained in the zoomed portion of the structure to be obtained first. The response external to the zoom, as well as the response of additional dof within various levels of zooming, is computed. With the triangular factor of the stiffness matrix of the original system available, this approach involves only the solution of a system of equations of small order.

Hirai, I.↗

An improved search for large-scale convection cells in the solar atmosphere

A reanalysis of Mount Wilson solar velocity observations was made to search for giant cellular patterns. The reanalysis avoids several errors made in a previous search. No cells are detected with sensitivity of 3 to 12 m/s depending upon wavenumber. The observed amplitudes do not conflict with recent model predictions.

Labonte, B. J.↗

Stress constraints in optimality criteria design

Procedures described emphasize the processing of stress constraints within optimality criteria designs for low structural weight with stress and compliance constraints. Prescreening criteria are used to partition stress constraints into either potentially active primary sets or passive secondary sets that require minimal processing. Side constraint boundaries for passive constraints are derived by projections from design histories to modify conventional stress-ratio boundaries. Other procedures described apply partial structural modification reanalysis to design variable groups to correct stress constraint violations of unfeasible designs. Sample problem results show effective design convergence and, in particular, advantages for reanalysis in obtaining lower feasible design weights.

Levy, R.↗