Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rail”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Comparing Cetane Number Measurement Methods

Cetane number is one of the most important fuel performance metrics for mixing controlled compression-ignition “diesel” engines, quantifying a fuel’s propensity for autoignition when injected into end-of-compression-type temperature and pressure conditions. The historical default and referee method on a Cooperative Fuel Research (CFR) engine configured with indirect fuel injection and variable compression ratio is cetane number (CN) rating. A subject fuel is evaluated against primary reference fuel blends, with heptamethylnonane defining a low-reactivity endpoint of CN = 15 and hexadecane defining a high-reactivity endpoint of CN = 100. While the CN scale covers the range from zero (0) to 100, typical testing is in the range of 30 to 65 CN. Alternatively, several constant-volume combustion chamber (CVCC)-based cetane rating devices have been developed to rate fuels with an equivalent derived cetane number (DCN) or indicated cetane number (ICN). These devices measure ignition delay for fuel injected into a fixed volume of high-temperature and high-pressure air to simulate end-of-compression-type conditions. In this study, a range of novel fuel compounds are evaluated across three CVCC methods: the Ignition Quality Tester (IQT), Fuel Ignition Tester (FIT), and Advanced Fuel Ignition Delay Analyzer (AFIDA). Resulting DCNs and ICNs are compared for fuels within the normal diesel fuel range of reactivity, as well as very high (~100) and very low DCNs/ICNs (~5). Distinct differences between results from various devices are discussed. This is important to consider because some new, high-efficiency advanced compression-ignition (CI) engine combustion strategies operate with more kinetically controlled distributed combustion as opposed to mixing controlled diffusion flames. These advanced combustion strategies may benefit from new fuel chemistries, but current rating methods of CN, DCN, and ICN may not fully describe their performance. In addition, recent evidence suggests ignition delay in modern on-road diesel engines with high-pressure common rail fuel injection systems may no longer directly correlate to traditional CN fuel ratings. Simulated end-of-compression conditions are compared for CN, DCN, and ICN and discussed in the context of modern diesel engines to provide additional insight. Results highlight the potential need for revised and/or multiple fuel test conditions to measure fuel performance for advanced CI strategies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

LuSEE-night power distribution system design

The Lunar Surface Electromagnetic Experiment at Night (LuSEE-Night) is a low-frequency, 0.5 to 50 MHz, radio experiment on the radio-quiet far side of the Moon. The instrument will be launched by NASA Commercial Lunar Payload Services in 2026. The LuSEE-Night instrument core is composed of a radio frequency spectrometer (SPT) processing signals from four antennas, the Data Controller Board (DCB), low electromagnetic interference (EMI) Picket Fence Power Supply (PFPS), and Power Distribution Unit (PDU). The battery powers the instrument during the lunar night and stores energy harvested by the solar panel array during the lunar day. The battery charging is controlled by the Power Conditioning and Distribution Unit (PCDU). The unregulated power is supplied either by the SpaceCraft (S/C) or the battery and gets distributed to the PFPS, communication radio, heaters, and deployables through the PDU. The PFPS generates all regulated low-voltage rails using switching regulation synchronized to the LuSEE-Night clock, which ensures self-generated EMI will be confined to well-defined frequency bins. Here, we discussed the unregulated power distribution system architecture and functionality. The PDU engineering and flight modules are developed and characterized to confirm compliance with LuSEE-Night requirements. At the time of writing, all power subsystem components have been integrated into the payload.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

A DNA molecular printer capable of programmable positioning and patterning in two dimensions

Nanoscale manipulation and patterning usually require costly and sensitive top-down techniques such as those used in scanning probe microscopies or in semiconductor lithography. DNA nanotechnology enables exploration of bottom-up fabrication and has previously been used to design self-assembling components capable of linear and rotary motion. In this work, we combine three independently controllable DNA origami linear actuators to create a nanoscale robotic printer. The two-axis positioning mechanism comprises a moveable gantry, running on parallel rails, threading a mobile sleeve. We show that the device is capable of reversibly positioning a write head over a canvas through the addition of signaling oligonucleotides. We demonstrate “write” functionality by using the head to catalyze a local DNA strand–exchange reaction, selectively modifying pixels on a canvas. Furthermore, this work demonstrates the power of DNA nanotechnology for creating nanoscale robotic components and could find application in surface manufacturing, biophysical studies, and templated chemistry.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Agent-Based Simulation Model for Analyzing Multimodal Transportation of CO2 for CCUS

The overarching goal of this work is to determine how the United States can avoid being constrained by transportation limitations as the CCUS process evolves to a full gigaton-level system. The model is data-driven, open to CO2 supply and demand points defined as input data, and designed to allow for transportation on waterways, rail, or pipeline.

Clark, RobinJ↗
DOE OSTI2023

Multimodal CO2 Transportation Cost Model

This model provides a cost estimate for transporting CO2 via truck or rail in the United States using commercially available equipment and technologies. The model includes an analysis of direct and indirect CO2 emissions to determine costs per net tonne of CO2 transported. Publicly available data and methods published in the peer-reviewed literature are used to the extent possible; references are available at the bottom of the "Calculations" sheet. Upstream (i.e., liquefaction, buffer storage) and downstream (i.e., buffer storage, reconditioning) activities are included in the model of emissions and costs. All capital and operating expenditures are estimated in the "Calculations" sheet. The cost of financing the project is determined in the "FINEX" sheet. All user inputs are done via drop down menus in on the "User Interface" sheet. Summary results are also provided on the "User Interface" sheet.

Myers, CoreyA↗
DOE OSTI2024

MODAQ-BB (Modular Offshore Data Acquisition System - Blackbox) [SWR-24-72]

MODAQ-BB is a compact, rapid deployment data acquisition system that can withstand water depths up to 400m. Codenamed "BlackBox" (or simply BB), since its initial purpose was to track marine assets and record vital data streams that could later be recovered in the event of a mishap - much like a traditional black box used in aviation and shipping, the name has stuck. MODAQ BlackBox is a battery-operable microcontroller platform with internal inertial sensing, GPS, satellite communications, and additional I/O (input/output) support in a depth-rated pressure enclosure. Since BB is self-contained and relatively compact, it can be quickly deployed with minimal effort. The enclosure can be clamped to a tube (such as part of a railing) or mast in a location with unobstructed view of the sky using the available clamp accessory or a common hose clamp. While BB is designed to operate unattended, users can configure what data are uploaded and the frequency of satellite transmissions. Once data are uploaded, they can be relayed to an email distribution list, the MODAQ:Web operational dashboard, or a custom destination. BB has found utility in the National Laboratory of the Rockies' (NLR's) Waterpower projects beyond its original vision and has been configured and successfully deployed in more traditional data-gathering applications where a simple, battery-operated solution was indicated. As part of the MODAQ family, BB fills a space in the spectrum of missions that can be supported that were previously impractical using the traditional MODAQ hardware architecture due to factors such as weight, size, and cost.

Raye, Robert↗
DOE OSTI2026

Dynamic Disruption Resilience in Intermodal Transport Networks: Integrating Flow Weighting and Centrality Measures

Resilient intermodal freight networks are vital for sustaining supply chains amid increasing threats from natural hazards and cyberattacks. Transportation resilience has been widely studied; understanding how random and targeted disruptions affect structural connectivity and functional performance remains a key challenge. To address this, this study evaluates the robustness of the US intermodal freight network, which consists of rail and water modes, using a simulation-based framework that integrates graph-theoretic metrics with flow-weighted centrality measures. Disruption scenarios are examined, including random failures as well as targeted node and edge removals based on static and dynamically updated degree and betweenness centrality. To reflect more realistic conditions, flow-weighted degree centralities (WDC) and partial node degradation are considered. Two resilience indicators are used: (1) the size of the giant connected component to measure structural connectivity; and (2) flow-weighted network efficiency (NE) to assess freight mobility under disruption. The results show that progressively degrading nodes ranked by WDC to 60% of their original functionality causes a sharper decline in normalized NE, for up to approximately 45 affected nodes, than complete failure (100% loss of functionality) applied to nodes targeted by weighted betweenness centrality or selected at random. This highlights how partial degradation of high-tonnage hubs can produce disproportionately large functional losses. The findings emphasize the need for resilience strategies that go beyond network topology to incorporate freight flow dynamics.

42 ENGINEERING↗
DOE OSTI2023

Assessment of design and location of an active prechamber igniter to enable mixing-controlled combustion of ethanol in heavy-duty engines

Here, this numerical study focuses on assessing the key design parameters of interest for use of an active prechamber igniter as an ignition assistance device to enable mixing-controlled combustion (MCC) of ethanol (E100) in a heavy-duty Caterpillar C9.3B engine. Computational fluid dynamic (CFD) simulations of a baseline diesel and prechamber retrofitted C9.3B at a gross indicated mean effective pressure (IMEPg) of 5 bar and 1800 rpm are carried out using CONVERGE. In particular, the sizing of the prechamber volume, sizing of total orifice cross sectional area (orifice diameter), and location of the prechamber relative to a centrally mounted common rail direct injector are varied to discern the appropriate operational and design characteristics to achieve robust ignition assistance at the selected conditions. Simulation results indicate that use of an active prechamber igniter with E100 as a standalone fuel source can replicate ignition delays and thermal efficiencies similar to diesel combustion at the same engine boundary conditions, thus not requiring any changes to the engine’s air handling system. Igniter mounting location, orifice sizing, and jet targeting were found to have the strongest influence on ignition assistance with preference toward larger orifice diameters that appropriately located heating contributions in near vicinity to the direct injector.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

EGS Collab Experiment 2: Continuous Broadband Seismic Waveform Data

Two broadband seismometers were installed on the 4100 level and recorded for the duration of EGS Collab Experiment #2. Inspired by published data from similar instruments installed in the Aspo Hard Rock Lab, these long-period instruments aimed to measure the tilting of the drift in response to the injection of fluid into the testbed. One instrument was installed underneath the wellheads in Site A (aka the "battery" alcove) and the other was installed along the east wall of the drift, south of Site B. Due to the feet of gravel (ballast) laid along the floor of the drift, we were unable to anchor the sensors directly to the rock. As a result, the coupling of the sensors to the experiment rock volume is likely poor. In addition, there are a number of noise sources that complicate the interpretation of the data. For example, sensor BBB is installed adjacent (within 3 ft) to the rail line that runs towards the Ross shaft. Trains (motors) run along this line almost daily and produce a large signal in these data. Careful extraction of periods of interest, as well as filtering for specific signals, is necessary. The sensors are Nanometrics Trillium Compact Posthole seismometers, sensitive down to 120 seconds period. They were installed as close to the drift wall and as deep as we could manually excavate (only about 1 ft or so). The holes were leveled with sand and the sensors were placed on a paver before backfilling with sand. The hole was then covered by a bucket filled with insulation to improve the sensor's isolation from daily temperature variations, which are minor but present due to drift ventilation from the surface. Data were recorded on Nanometrics Centaur digitizers at 100 Hz. The full response information is available in the StationXML file provided here, or by querying the sensors through the IRIS DMC (see links below). These instruments were provided free of charge through the IRIS PASSCAL instrument center. The network code is XP and the station codes are BBA and BBB. The waveform data can be queried through the IRIS FDSN server using any method the user likes. One convenient option is to use the Obspy python package: https://docs.obspy.org/packages/obspy.clients.fdsn.html

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Atlanta—1991 Household Interview Survey

The Atlanta Regional Commission conducted a Household Travel Survey in 1991 to capture the reality of the locale, including infrastructure improvements—such as new highways, rail, and housing developments—additional households, income, trip chaining, and telecommuting, as well as other typical demographic characteristics. The survey collected demographic, socioeconomic, and travel information on work and non-work travel behavior. Travel data includes trip generation, trip distribution, and modal choice for 3,626 households that completed a travel log.

1Hz data↗
DOE OSTI2026

Onboard/Origin-Destination Survey - Phoenix - 2015

Valley Metro conducted an on-board transit survey during spring 2015. This project gathered updated travel behavior data from transit users that encompassed all rail and bus fixed-route services in the Phoenix metropolitan planning area. The study’s goal was to compile statistically accurate information about transit riders and how they use the transit system.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Transit Rider/Travel Behavior Inventory Survey - Minneapolis-St. Paul Metro - 2005

The survey was an on-board survey of transit riders on all regular route services for bus and light-rail in the Minneapolis-Saint Paul metropolitan area. The primary purpose of the study was to gather the data needed to update the mode choice models that are an integral component of the regional travel forecast model maintained by the Metropolitan Council, the metropolitan planning organization for the Minneapolis-Saint Paul metropolitan area. The survey instrument focused on identifying characteristics of the trip taken by each transit rider, including origin, destination, trip purpose, and mode of access. The survey also collected relevant socioeconomic and demographic information.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗