Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radiality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Radial Star Formation Histories in 32 Nearby Galaxies

The spatially resolved star formation histories are studied for 32 normal star-forming galaxies drawn from the Spitzer Extended Disk Galaxy Exploration Science survey. At surface brightness sensitivities fainter than 28 mag arcsec{sup −2}, the new optical photometry is deep enough to complement archival ultraviolet and infrared imaging and to explore the properties of the emission well beyond the traditional optical extents of these nearby galaxies. Fits to the spectral energy distributions using a delayed star formation history model indicate a subtle but interesting average radial trend for the spiral galaxies: the inner stellar systems decrease in age with increasing radius, consistent with inside-out disk formation, but the trend reverses in the outermost regions with the stellar age nearly as old as the innermost stars. These results suggest an old stellar outer disk population formed through radial migration and/or the cumulative history of minor mergers and accretions of satellite dwarf galaxies. The subset of S0 galaxies studied here show the opposite trend compared to what is inferred for spirals: characteristic stellar ages that are increasingly older with radius for the inner portions of the galaxies, and increasingly younger stellar ages for the outer portions. This result suggests that either S0 galaxies are not well modeled by a delayed-τ model, and/or that S0 galaxies have a more complicated formation history than spiral galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimate of the Mass and Radial Profile of the Orphan–Chenab Stream's Dwarf-galaxy Progenitor Using MilkyWay@home

We fit the mass and radial profile of the Orphan–Chenab Stream's (OCS) dwarf-galaxy progenitor by using turnoff stars in the Sloan Digital Sky Survey and the Dark Energy Camera to constrain N-body simulations of the OCS progenitor falling into the Milky Way on the 1.5 PetaFLOPS MilkyWay@home distributed supercomputer. We infer the internal structure of the OCS's progenitor under the assumption that it was a spherically symmetric dwarf galaxy composed of a stellar system embedded in an extended dark matter halo. We optimize the evolution time, the baryonic and dark matter scale radii, and the baryonic and dark matter masses of the progenitor using a differential evolution algorithm. The likelihood score for each set of parameters is determined by comparing the simulated tidal stream to the angular distribution of OCS stars observed in the sky. We fit the total mass of the OCS's progenitor to (2.0 ± 0.3) × 10 7 M ⊙ with a mass-to-light ratio of γ = 73.5 ± 10.6 and (1.1 ± 0.2) × 10 6 M ⊙ within 300 pc of its center. Within the progenitor's half-light radius, we estimate a total mass of (4.0 ± 1.0) × 10 5 M ⊙ . We also fit the current sky position of the progenitor's remnant to be (α, δ) = ((166.0 ± 0.9)°, (–11.1 ± 2.5)°) and show that it is gravitationally unbound at the present time. The measured progenitor mass is on the low end of previous measurements and, if confirmed, lowers the mass range of ultrafaint dwarf galaxies. Our optimization assumes a fixed Milky Way potential, OCS orbit, and radial profile for the progenitor, ignoring the impact of the Large Magellanic Cloud.

79 ASTRONOMY AND ASTROPHYSICS↗

Stellar Mergers or Truly Young? Intermediate-age Stars on Highly Radial Orbits in the Milky Way’s Stellar Halo

Reconstructing the mass assembly history of the Milky Way relies on obtaining detailed measurements of the properties of many stars in the galaxy, especially in the stellar halo. One of the most constraining quantities is stellar age, as it can shed light on the accretion time and quenching of star formation in merging satellites. However, obtaining reliable age estimates for large samples of halo stars is difficult. We report published ages of 120 subgiant halo stars with highly radial orbits that likely belong to the debris of the Gaia-Enceladus/Sausage (GES) galaxy. The majority of these halo stars are old, with an age distribution characterized by a median of 11.6 Gyr and a 16th (84th) percentile of 10.5 (12.7) Gyr. However, the distribution is skewed, with a tail of younger stars that span ages down to ~6–9 Gyr. All highly radial halo stars have chemical and kinematic/orbital quantities that associate them with the GES debris. Initial results suggest that these intermediate-age stars are not a product of mass transfer and/or stellar mergers, which can bias their age determination low. If this conclusion is upheld by upcoming spectrophotometric studies, then the presence of these stars will pose an important challenge for constraining the properties of the GES merger and the accretion history of the galaxy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Inference of Experimental Radial Impurity Transport on Alcator C-Mod: Bayesian Parameter Estimation and Model Selection.

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. We find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent radial turbine research at the NASA Lewis Research Center

The high efficiencies of small radial turbines led to their application in space power systems and numerous APU and shaft power engines. Experimental and analytical work associated with these systems included examination of blade-shroud clearance, blade loading, and exit diffuser design. Results indicate high efficiency over a wide range of specific speed and also insensitivity to clearance and blade loading in the radial part of the rotor. The exit diffuser investigation indicated that a conventional conical outer wall may not provide the velocity variation consistent with minimum overall diffuser loss.

Rohlik, H. E.↗

Effects of radial and circumferential inlet velocity profile distortions on performance of a short-length double-annular ram induction combustor

Inlet air velocity profile tests were conducted on a full-scale short-length 102-centimeter-diameter annual combustor designed for advanced gas turbine engine applications. The inlet profiles studied include radial distortions that were center peaked, and tip peaked, as well as a circumferential distortion which was center peaked for one-third of the circumference and flat for the other two-thirds. An increase in combustor pressure loss was the most significant effect of the radial air velocity distortions. With the circumferential distortion, exit temperature pattern factor doubled when compared to a flat velocity profile.

Schultz, D. F.↗

The three-dimensional steady radial expansion of a viscous gas from a sonic source into a vacuum.

The three-dimensional steady radial expansion of a viscous, heat-conducting, compressible fluid from a spherical sonic source into a vacuum is analyzed using the Navier-Stokes equations as a basis. It is assumed that the model fluid is a perfect gas having constant specific heats, a constant Prandtl number of order unity, and viscosity coefficients varying as a power of the absolute temperature. Limiting forms for the flow variable solutions are studied for the Reynolds number based on the sonic source conditions, going to infinity and the Newtonian parameter both fixed and going to zero. For the case of the viscosity-temperature exponent between .5 and 1, it is shown that the velocity as well as the pressure approach zero as the radial distance goes to infinity. The formulations of the distinct regions that span the domain extending from the sonic source to the vacuum are presented.

Bush, W. B.↗

Idealized model for the radial gradient of modulated cosmic rays.

Development of a conceptually idealized model for interpreting existing and future measurements of the radial gradient of modulated cosmic rays in the limit that deceleration and convection effects become comparable. The proposed model assumes that the modulated spectrum consists of two idealized regions: at low energy, below some critical transition energy T sub c, a region where the shape of the spectrum is assumed to be determined wholly by a balance between convection and deceleration effects; and, at higher energies, above T sub c, a region where the magnitude and shape of the spectrum are taken to be those given by the usual convection-diffusion modulation. The application of this model, invoking some straightforward assumptions about the behavior of T sub c, suggests that the radial gradient in the regime where deceleration processes are dominant may be related to the spectral index of the unmodulated spectrum at the energy T sub c and to the absolute level of modulation. This is in contrast to the gradient at high energies, above T sub c, which is related only to local interplanetary characteristics through convection and diffusion.

O'Gallagher, J. J.↗

Recent radial turbine research at the NASA Lewis Research Center.

The major results obtained in several recent experimental programs on small radial inflow turbines for space applications are presented and discussed. Specifically, experimental and analytical work associated with these systems that has included examination of blade-shroud clearance, blade loading, and exit diffuser design, is considered. Results indicate high efficiency over a wide range of specific speed, and also insensitivity to clearance and blade loading in the radial part of the rotor. The exit diffuser investigation indicated that a conventional conical outer wall may not provide the velocity variation consistent with minimum overall diffuser loss.

Rohlik, H. E.↗

Micrometeorite craters on lunar glass particles - The relationship between radial fracture zones and spall zones.

Discussion of the microimpact-crater morphology observed by scanning electron microscopy on a glass bead (nearly 580 microns in maximum diameter) recovered from zone A of the Luna 16 sample. The microcrater has a diameter of approximately 200 microns and a centrally located melted region or pit that is slightly elevated above the surrounding area. Around the pit is a radial fracture zone half of which has spalled off. The spall zone is more than half again as large as the radial fracture zone.

Glass, B. P.↗

Convective envelopes and radial pulsation of massive red supergiants.

A grid of convective envelope models covering a wide range of astrophysical parameters has been constructed for M-type supergiants with the help of theoretical evolutionary tracks, mixing-length theory, and the inclusion of hydrogen and helium ionization zones. Linear adiabatic pulsation theory has been used to obtain the first four normal modes of radial pulsation for all the models. All the convective envelopes are found to be dynamically stable. The theoretical pulsation calculations confirm that the primary observed period in variable M-type supergiants is probably due to the fundamental mode of radial pulsation.

Stothers, R.↗

A simple, radially correlated ground state wavefunction for two electron atoms.

A one parameter function is presented as an approximation to the ground state wavefunction of the two electron radial hamiltonian. The parameter may be fixed by a nonvariational criterion. The resulting expectation value of the radial hamiltonian differs from its exact eigenvalue by about 2 parts in 3000 for helium while the 'local energy' never differs by more than 10% from the exact value over the entire r1-r2 plane. The cases Z = 1 and Z = 3 are also investigated.

Altick, P. L.↗

Improved photographic prints with a linear radial transmission filter

Linear Radial Transmission Filter (LRTF) is easy to use and yet results in prints which depict more information contained in negative than can be shown by direct printing. LRTF is optical-quality filter which has maximum transmission in center and linear drop in transmission radially out from center.

Weinstein, L. M.↗

Fore and aft elastic response characteristics of size 34x9.9, type 7, 14 ply-rated aircraft tires of bias ply, bias belted, and radial belted design

An investigation was conducted to determine the fore-and-aft elastic response characteristics of aircraft tires of bias ply, bias-belted, and radial-belted design. The investigation consisted of: (1)static and rolling tests, (2)a statistical analysis which related the measured tire elastic characteristics to variations in the vertical load, inflation pressure, braking force and/or tire vertical deflection, and (3) a semi-empirical analysis which related the tire elastic behavior to measured wheel slippage during a steady-state braking. The results of this investigation indicate that the bias-belted tire has the largest spring constant value for most loading conditions and the radial-belted tire has the smallest spring constant value.

Tanner, J. A.↗

Radial gradients of galactic cosmic ray protons and helium nuclei

Variation of the cosmic ray intensity as a function away from the sun and its radial derivative is studied by plotting satellite cosmic ray measurements against sea level neutron monitor data. Results show that the solar modulation cavity extends well beyond 2 AU and that irregularities in the sun's magnetic field are carried outward radially by the solar wind, thus sweeping low energy cosmic rays out of the solar system and at the same time cooling cosmic rays reaching the earth.

Teegarden, B. J.↗

Interplanetary radial gradients of galactic cosmic ray protons and helium nuclei - Pioneer 8 and 9 measurements from 0.75 to 1.10 AU.

We report measurements of the radial interplanetary cosmic ray gradient made with cosmic ray instruments aboard the Pioneer 8 and 9 spacecraft. The time period covered in these studies is from January 1968 to June 1969. During this time, the radial separation of these two spacecraft varied from 0.75 to 1.10 AU from the sun. This study includes detailed measurements of the differential spectra and gradients of protons and helium nuclei from 2 to 1200 Mev/nucleon. The differential gradient for each species is observed to go through a broad maximum of about 50%/AU at energies corresponding to about 1 BV rigidity, decreasing at both lower and higher rigidities. The proton and helium nuclei gradients are small down to the lowest energies we measure.-

Webber, W. R.↗

The elastic layer with a cylindrical hole subjected to a nonuniform axisymmetric radial displacement.

A problem in the linear theory of elasticity is considered wherein a layer with a circular cylindrical hole is subjected to a nonuniform axisymmetric radial displacement. The solution utilizes Navier's equations of elasticity which are solved by means of extended Hankel transforms. A special case in which the radial displacement is a linear function of the axial coordinate is presented. Numerical results are given in graphical form for the case when hole radius and layer thickness are equal. The inversion integrals were evaluated numerically using Longman's technique for computing infinite integrals of oscillatory functions.

Grissom, D. S.↗

Ultrasonic scanner for radial and flat panels

An ultrasonic scanning mechanism is described that scans panels of honeycomb construction or with welded seams. It incorporates a device which by simple adjustment is adapted to scan either a flat panel or a radial panel. The supporting structure takes the form of a pair of spaced rails. An immersion tank is positioned between the rails and below their level. A work holder is mounted in the tank and is adapted to hold the flat or radial panel. A traveling bridge is movable along the rails and a carriage is mounted on the bridge.

Spencer, R. L.↗