Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “protective layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Corrosion of novel reactive silver ink and commercial silver-based metallizations in diluted acetic acid

Silver-based metallizations in photovoltaic modules are susceptible to corrosion by acetic acid generated in ethylene vinyl acetate encapsulated modules, resulting in power losses over time. Here, three silver-based metallizations are exposed to diluted acetic acid, in concentrations representative of that found in field-exposed modules. Compositional, morphological, and structural changes of the metallizations are studied over 3000 h of exposure to diluted acetic acid using Raman spectroscopy mapping, X-ray diffraction, and scanning electron microscopy. The three metallizations studied are: 1) a commercial high-temperature fire-through Ag paste, commonly used for Si diffused junction solar cells; 2) a commercial low-temperature paste normally used for silicon heterojunction cells; and 3) a novel low-temperature reactive silver ink shown to be suitable for photovoltaic applications. We find distinct corrosion rates for the high-temperature silver paste and reactive silver ink in the presence of diluted acetic acid. However, the low-temperature silver paste appears to be more corrosion resistant, likely due to a polymer layer that protects the silver particles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fragmentation of photovoltaic backsheets after accelerated weathering exposure

The backsheet of a photovoltaic (PV) module functions primarily to provide safe operation through electrical insulation and protect the interior from environmental exposure. For most applications, backsheets consist of opaque, but highly reflective, films that protect inner layers from degradation from ultraviolet (UV) light. Backsheets can fail if they delaminate or form cracks under strain. In a PV module, the maximum strains that can be applied are only on the order of a few percent. The greatest strains are likely to be highly localized around topographical features. Therefore, to assess the likelihood of a crack being initiated in a backsheet, we apply small amplitude strains to backsheet films under microscopic examination using a laser scanning confocal microscope. Furthermore, this allows us to monitor both the depth and density of cracks as well as the onset strain. Here we perform these measurements after exposure to UV light.

14 SOLAR ENERGY↗
DOE OSTI2023

Effects of Ball Milling on the Electrochemical Capacity and Interfacial Stability of Li 2 MnO 3 Cathode Materials

The cycling mechanism of Li 2 MnO 3 cathode materials synthesized by conventional solid-state methods at high temperatures (800-900 °C) has been intensively investigated. Previous studies showed that CO 2 and O 2 gas evolution accounts for most of the charge capacity, followed by some Mn reduction during discharge. In this work, we analyze the effects of ball milling on the structure, surface contaminant, and electrochemical capacity of Li 2 MnO 3 cathode material, with or without a graphitic fluoride (C-F) additive. At the same time, C-F is added to form a protective coating layer that reduces unwanted reactions with the electrolyte during later electrochemical cycling. We find that the C-F ball-milled material shows Li 2 MnO 3 /LiMnO 2 composite phases, while the purely ball-milled material shows a single Li 2 MnO 3 phase. Furthermore, we characterize surface species and gas evolution during the first cycle, which reveals the decomposition of Li 2 CO 3 and the carbonate electrolyte during the first charge, especially during the high potential region (>4.4 V), and the electrochemical reduction of only a small fraction of the evolved gas on the first discharge (<2.75 V). The appearance further demonstrates the repetitive nature of this process during charge and disappearance during discharge of Mn 2p 3/2 X-ray photoelectron spectroscopy (XPS) spectra signals during the first two cycles. These processes result in first discharge specific capacities of only 155 and 170 mAh/g after first charge specific capacities of 210 and 320 mAh/g for the pure ball-milled and ball-milled with C-F materials, respectively. These studies demonstrate the interfacial instability introduced by ball milling. However, the electrochemical capacity is significantly increased, necessitating further investigation to determine whether ball milling can activate Mn-containing cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Predicted Fracture Tendency of Naturally Occurring Aluminum Surface Coatings under Tensile Loading

Naturally occurring coatings on aluminum metal, such as its oxide or hydroxide, serve to protect the material from corrosion. Understanding the conditions under which these coatings mechanically fail is therefore expected to be an important aspect of predictive models for aluminum component lifetimes. To this end, we develop and apply a molecular dynamics (MD) modeling framework for conducting tension tests that is capable of isolating factors governing the mechanical strength as a function of coating chemistry, defect morphology, and variables associated with the loading path. We consider two representative materials, including γ-Al 2 O 3 and γ-Al(OH) 3 (i.e., oxide and hydroxide), both of which form readily as aluminum surface coatings. Our results indicate that defects have a significant bearing on the strength of aluminum oxide, with grain boundaries serving to reduce the strain at failure from ε zz = 0.300 to 0.219, relative to perfect single crystal. Our simulations also predict that porosity lowers the elastic stiffness and yield strength of the oxide. Relative to perfect crystal, we find porosity factors of 5%, 10% and 20% decrease the yield stress by 26%, 36% and 53%, respectively. MD predicts that perfect hydroxide and oxide single crystal have respective strains at failure of 0.08 and 0.31 under tensile uniaxial strain loading, and that the corresponding yield stresses are respectively 1.6 and 11.1 GPa. These data indicate that the hydroxide is substantially more susceptible to mechanical failure than the oxide. Our results, coupled with literature findings that indicate hot and humid conditions favor formation of hydroxide and defective oxide coatings, indicate the potential for a complicated dependence of aluminum corrosion susceptibility and stress corrosion cracking on aging history.

36 MATERIALS SCIENCE↗
DOE OSTI2026

How Silica Surface Chemistry Modulates Interfacial Water: Insights from Machine Learning Molecular Dynamics

Controlling water structure and dynamics at silica interfaces are central to a wide range of technologies, including protective oxide layers for solar water splitting and nanoporous membranes. In this work, we develop a machine learning interatomic potential, trained via active learning, to achieve ab initio accuracy for water confined between hydroxylated silica surfaces over a range of silanol coverages and slit widths. We find that partially hydroxylated surfaces (50 and 75% OH) support stronger water−surface hydrogen bonding and more extended interfacial density profiles than fully hydroxylated (100% OH) surfaces, indicating that increasing OH coverage does not necessarily strengthen interfacial hydrogenbond networks. Translational diffusion decreases approximately linearly with slit width and OH coverage, whereas rotational dynamics respond nonlinearly. In particular, at the smallest slit width of 5 Å, 75% OH coverage produces an enhanced local tetrahedral ordered interfacial network that strongly suppresses reorientation, while 100% coverage yields a crowded, disordered interfacial layer that also hinders rotation. In contrast, the 50% OH coverage is sufficiently sparse that it does not markedly alter water structure or dynamics under confinement. These results show that coupled control of pore size and surface chemistry enables nonlinear tuning of interfacial water structure and transport, providing a design strategy for optimizing porous silica for either enhanced interfacial stability and controlled reactivity or rapid and selective transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Time of Flight Secondary Ion Mass Spectrometry for Characterization of Pt-Coated Porous Transport Layers in PEM Water Electrolyzers

Titanium-based porous transport layers (PTLs) and iridium-based catalyst layers (CLs) are two main components of proton exchange membrane water electrolyzers (PEMWEs). PTLs are typically coated with platinum to minimize interfacial losses and to support long-term operation. Optimizing coatings and the PTL-CL interface requires comprehensive characterization. This study establishes time-of-flight secondary ion mass spectrometry (ToF-SIMS) as a valuable technique for PTL characterization, addressing capabilities and limitations related to PTL morphology. A methodology was developed that uses a Cs + sputter beam for dynamic depth profiling, with data collected in both positive-ion (MCs + ) and negative-ion modes to generate depth profiles, 2D ion maps, and 3D ion reconstructions. ToF-SIMS detected relative differences in platinum-layer thickness between samples; these trends were validated by cross-sectional scanning transmission electron microscope (STEM) measurements and flat-titanium substrate controls. Interfacial oxide layers are identified in both ion modes, with enhanced oxide sensitivity in negative mode. The technique’s high sensitivity enables detection of nanometer-scale coatings and trace impurities within the bulk PTL structure. These results provide a methodological framework for analyzing Pt-coated PTLs, with the potential to extend to other components in PEMWEs and other electrolyzer systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Non-fullerene acceptor organic photovoltaics with intrinsic operational lifetimes over 30 years

Abstract Organic photovoltaic cells (OPVs) have the potential of becoming a productive renewable energy technology if the requirements of low cost, high efficiency and prolonged lifetime are simultaneously fulfilled. So far, the remaining unfulfilled promise of this technology is its inadequate operational lifetime. Here, we demonstrate that the instability of NFA solar cells arises primarily from chemical changes at organic/inorganic interfaces bounding the bulk heterojunction active region. Encapsulated devices stabilized by additional protective buffer layers as well as the integration of a simple solution processed ultraviolet filtering layer, maintain 94% of their initial efficiency under simulated, 1 sun intensity, AM1.5 G irradiation for 1900 hours at 55 °C. Accelerated aging is also induced by exposure of light illumination intensities up to 27 suns, and operation temperatures as high as 65 °C. An extrapolated intrinsic lifetime of > 5.6 × 10 4 h is obtained, which is equivalent to 30 years outdoor exposure.

14 SOLAR ENERGY↗
DOE OSTI2021

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li⁺-conducting cathode-electrolyte interphase

Ni-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes are investigated to realize high energy density Li ion batteries for long life electric vehicle applications. However, capacity decay and thermal instability due to cathode-electrolyte interfacial degradation remain challenges that require sophisticated surface stabilization methods to address. Here, we propose a strategy, for the first time, to form an artificial Li + -conducting cathode-electrolyte interphase (ALCEI) on the NCM811 cathode surface using a nucleophilic reaction between polysulfides and vinylene carbonate (VC). Furthemore, the as-formed ALCEI layer simultaneously protects the NCM particles from electrolyte corrosion and facilitates Li + ion transport, thus enabling stable and high rate cycling of NCM811. As a result, the ALCEI-modified NCM811 cathode exhibits a high capacity (211.6 mA h g -1 at 0.1C), notable rate capability (134 mA h g -1 at 10C), and superior cycle stability (94.2% over 200 cycles at 1C). These results underscore the use of interfacial engineering in high voltage cathode material development and provide a feasible strategy for stabilizing Ni-rich cathode interfaces in practical Li ion battery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Lasing Below 170 nm Using an Oscillator FEL

The short wavelength operation of free-electron laser (FEL) oscillators is limited by the availability of high-reflectivity, thermally stable, and radiation-resistant FEL mirrors in the VUV wavelength. We report our recent work to extend the shortest lasing wavelength of the oscillator FEL to 168.6 nm using a storage ring FEL. This progress has been made possible by developing a new FEL configuration with substantially reduced undulator harmonic radiation on the FEL mirror, a thermally stable FEL optical cavity, and a new type of high-reflectivity fluoride-based multilayer coating with a protective capping layer. Using these fluoride-based mirrors, we have demonstrated storage ring FEL lasing from 168.6 to 179.7 nm with excellent beam stability. Employing this VUV FEL in Compton scattering, we have produced the first 120 MeV gamma rays at the High Intensity Gamma-ray Source (HIGS). Furthermore, operating the HIGS in this new high-energy region will create many new opportunities for photonuclear physics research, in particular, the low-energy QCD research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Conditions of coherent-phonon excitation in SrMnSb2 films and crystals

Excitation of coherent phonons has the potential to dramatically alter the electronic structure of Dirac and Weyl semimetals, enabling sub-picosecond control of their optical and electronic properties. The Dirac semimetal SrMnSb2 is a candidate for such control, with a coherent-phonon mode that is predicted to close and reopen a gap at the Dirac node. Here, through a series of ultrafast pump-probe experiments, we establish suitable samples and conditions for driving the coherent phonon to high amplitude and attempting to observe the gap’s closure. Films of SrMnSb2 grown by molecular-beam epitaxy are shown to have phononic properties matching those of bulk crystals. We find that the phonon can be strongly excited by pump pulses with wavelength near 1500 nm, which will excite a 30-nm film almost uniformly and will penetrate the arsenic capping layers that protect the films. We find that samples withstand pump pulses of fluence up to 20 mJ/cm2, and we demonstrate the potential for sequences of pulses to amplify the oscillation while suppressing other phonon modes. Armed with our new knowledge of the conditions for exciting the desired coherent phonon, future experiments will be well prepared to measure its motion and to observe phononic control of the Dirac-point gap.

Rai, Manita↗
DOE OSTI2024

Is Ba 3 In 2 O 6 a high- T c superconductor?

It has been suggested that Ba 3 In 2 O 6 might be a high-Tc superconductor. Experimental investigation of the properties of Ba 3 In 2 O 6 was long inhibited by its instability in air. Recently epitaxial Ba 3 In 2 O 6 with a protective capping layer was demonstrated, which finally allows its electronic characterization. The optical bandgap of Ba3In2O6 is determined to be 2.99 eV in-the (001) plane and 2.83 eV along the c-axis direction by spectroscopic ellipsometry. First-principles calculations were carried out, yielding a result in good agreement with the experimental value. Various dopants were explored to induce (super-)conductivity in this otherwise insulating material. Neither A- nor B-site doping proved successful. The underlying reason is predominately the formation of oxygen interstitials as revealed by scanning transmission electron microscopy and first-principles calculations. Additional efforts to induce superconductivity were investigated, including surface alkali doping, optical pumping, and hydrogen reduction. To probe liquid-ion gating, Ba 3 In 2 O 6 was successfully grown epitaxially on an epitaxial SrRuO 3 bottom electrode. So far none of these efforts induced superconductivity in Ba 3 In 2 O 6 , leaving the answer to the initial question of whether Ba 3 In 2 O 6 is a high-T c superconductor to be 'no' thus far.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Quantum Computing with Majorana Kramers Pairs

Here, we propose a universal gate set acting on a qubit formed by the degenerate ground states of a Coulomb-blockaded time-reversal invariant topological superconductor island with spatially separated Majorana Kramers pairs: the “Majorana Kramers qubit.” All gate operations are implemented by coupling the Majorana Kramers pairs to conventional superconducting leads. Interestingly, in such an all-superconducting device, the energy gap of the leads provides another layer of protection from quasiparticle poisoning independent of the island charging energy. Moreover, the absence of strong magnetic fields—which typically reduce the superconducting gap size of the island—suggests a unique robustness of our qubit to quasiparticle poisoning due to thermal excitations. Consequently, the Majorana Kramers qubit should benefit from prolonged coherence times and may provide an alternative route to a Majorana-based quantum computer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

BACKFLIP: Identification of Materials and Changes Upon Aging of Emerging Fluoropolymer-Free and Industry-Benchmark PV Backsheets

Extending lifetimes of photovoltaic (PV) modules and decreasing manufacturing and decommissioning costs are motivating research of novel PV module backsheet materials. Backsheet integrity is critical to the safety and performance of a PV module, however, the polymeric materials are often vulnerable to environmental degradation. The long-term durability of emerging polyolefin (PO) materials is being examined to inform regarding the possible replacement of laminated backsheets containing polyethylene terephthalate (PET) cores and fluoropolymer protective inner/outer layers. This study compares traditional PET-based backsheets with novel, co-extruded, and recyclable PO-based backsheets after being subjected to hygrometric and UV photolytic accelerated weathering. A large set of characterization methods will compare physical, chemical, structural, mechanical, and insulating properties of these backsheets and the resulting mini-module (MiMo) PV performances. The study of chemical composition, glass- and phase-transition temperatures, degree of crystallinity, and crystalline structure are described here.

mini-module↗
DOE OSTI2024

Sac1 links phosphoinositide turnover to cryptococcal virulence

Cryptococcus neoformans is an environmentally acquired fungal pathogen that causes over 140,000 deaths per year. Cryptococcal infection occurs when infectious particles are deposited into the lung, where they encounter host phagocytic cells. C. neoformans may be engulfed by these phagocytes, an important step of infection that leads to outcomes ranging from termination of infection to cryptococcal dissemination. To study this critical process, we screened approximately 4,700 cryptococcal gene deletion mutants for altered uptake, using primary mouse and human phagocytic cells. Among the hits of these two screens, we identified 93 mutants with perturbed uptake in both systems, as well as others with differences in uptake by only one cell type. We further screened the hits for changes in thickness of the capsule, a protective polysaccharide layer around the cell which is an important cryptococcal virulence factor. The combination of our three screens yielded 45 mutants, including one lacking the phosphatidylinositol-4-phosphate phosphatase Sac1. In this work, we implicate Sac1 in both host cell uptake and capsule production. We found that sac1 mutants exhibit lipid trafficking defects, reductions in secretory system function, and changes in capsule size and composition. Many of these changes occur specifically in tissue culture media, highlighting the role of Sac1 phosphatase activity in responding to the stress of host-like conditions. Overall, these findings show how genome-scale screening can identify cellular factors that contribute to our understanding of cryptococcal biology and demonstrate the role of Sac1 in determining fungal virulence.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Novel Lightweight, Low-Cost Heliostat for Concentrating Solar Power (SBIR Phase I Final Report)

The overall goal of this Department of Energy (DOE) SBIR Phase I project was to demonstrate the feasibility of the L.Garde, Inc. heliostat mirror facet for use in concentrated solar power applications. Prior to this Phase I project, L.Garde, Inc. developed a design for a lightweight and low cost mirror facet and successfully fabricated small scale (0.667 m 2 ) with a mirror surface flatness of 0.7 mrad. Therefore, the focus of the Phase I effort was to (1) demonstrate scalability by fabricating larger size mirrors while retaining the same mirror surface flatness, (2) demonstrate the design can withstand operating environment conditions through field testing, and (3) perform cost analysis to show the heliostat mirror facet design can meet DoE goals of < 12 kg/m2 and <$30/m 2 . During the Phase I project, L.Garde successfully fabricated large area (1.395 m 2 ) heliostat mirror facets, with a mass per unit area of 8 kg/m 2 and a cost of $29.80/m 2 . Surface flatness measurements (using contact probe technique) were performed on the mirror surface and results showed a flatness of 0.68 mrad, which were in agreement with previously fabricated small scale mirror facets. Slope error measurements was also performed on the mirror surface and results showed a slope error of 0.77 mrad which also was in agreement with previously fabricated small scale mirror facets. One large area mirror facet was subjected to a three (3) month field test. Surface flatness and slope error measurements were performed on the mirror surface after the field test and results were 0.663 mrad and 0.58 mrad respectively. The large scale heliostat mirror facets were also subjected to accelerated aging. However, during this exposure we observed failure due to the breaking of the mirror facets. Further investigation into the source of the failure showed that the mirror component alone showed signs of degradation during the same accelerated aging test. We believe that moisture ingress is occurring when subjected to high humidity, leading to buildup of water with the layers of protective paints and resulting in mirror breakage when water expands in freezing conditions. In order to mitigate or eliminate this issue, a new weatherproofing strategy may be implemented or a new mirror component may be used that is able to survive accelerated aging conditions.

14 SOLAR ENERGY↗
DOE OSTI2023

HydroGEN Seedling: Monolithically Integrated Thin Film/Silicon Tandem Photoelectrodes for High-Efficiency and Stable Photoelectrochemical Water Splitting

In this project, we propose to develop monolithically integrated Si-based tandem photoelectrodes to achieve both high solar-to-hydrogen (STH) efficiency (>15%) and long-term stability (>1,000 hours) in spontaneous water splitting systems. The proposed tandem devices consist of a Ta 3 N 5 , BCTSSe, or In 0.5 Ga 0.5 N top junction, which has a bandgap of ~1.7-2.0 eV and can split the solar spectrum with the Si bottom junction. Ta 3 N 5 , BCTSSe, and InGaN will be grown/deposited on a low-resistivity nanowire tunnel junction on Si substrates using atomic layer deposition (ALD), sputtering, and molecular beam epitaxy (MBE), respectively. Both n and p-type Si solar wafers will be utilized, which can serve as the photoanode or photocathode, respectively. We will use N-rich GaN ultrathin passivation layers to protect photoelectrodes from corrosion and oxidation.

08 HYDROGEN↗
DOE OSTI2024

AOI [1] Advanced Manufacturing of Ceramic Anchors with Embedded Sensors for Process and Health Monitoring of Coal Boilers

Researchers at West Virginia University (WVU) developed methods to fabricate and test ceramic anchors with an embedded sensor technology for monitoring the health and processing conditions within pulverized coal (PC) and fluidized-bed combustion (FBC) boiler systems. The technology included the development of advanced manufacturing processes for 2D/3D printing electroceramic (conductive ceramic) sensor designs within the ceramic anchor microstructure during the manufacturing process. This advanced manufacturing process would allow for the precise control of local microstructure and composition in order to engineer layer-by-layer any protective and electrically active materials within the refractory anchor. This 3D printing technology would permit the rapid and controlled design of the refractory microstructure and embedded sensor design throughout the volume of the ceramic anchor. The work also included a method to interconnect the sensors to boiler shell through the anchor clamp, where the sensor signals will be processed by low-power electronics and transmitted wirelessly to a central processing hub. The end-goal of the program was to produce a ceramic anchor sensor system which would be ready for implementation within a coal boiler, and/or other similar refractory liner systems (such as that in the glass and metal manufacturing areas). The project objectives were to: 1) Define the chemical and microstructural stability, in addition to the electrical properties, of oxide and non-oxide ceramic composites to be embedded within the ceramic anchor compositions that may operate up to 1400ºC; 2) Develop and implement the 2D/3D printing technology to pattern and control the microstructure of the ceramic anchor and embedded sensor circuits; 3) Develop an interconnect technology which will permit easy installation of the ceramic anchors and signal collection at the boiler shell; 4) Develop low power analog electronics and wireless communication hardware to efficiently collect the sensor signal at each processing unit and transmit data to a central hub for data analysis; 5) Demonstrate the smart ceramic anchor system for temperature and liner fracture within a high-temperature processing unit, such as a boiler furnace or glass melting furnace floor/wall liner.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Adapting Traditional Hazards Analysis Methods to Address Cyber Risks

Traditional hazards analysis (HA) methods, originally developed to address physical and operational risks, often fall short when it comes to identifying and mitigating cyber threats. These cyber threats pose unique and evolving risks to critical infrastructure and industrial control systems (ICS). This report explores the integration of Cyber-Informed Engineering (CIE) principles into existing HA methods to enhance their ability to address cyber-induced risks. CIE provides organizations with a practical, cost-effective approach to closing the gap between traditional HA methods and the need for cyber risk mitigation. By leveraging existing safety processes and controls, CIE allows users to examine and mitigate cyber vulnerabilities without overhauling existing HA methods. This report identifies areas where HA and CIE naturally align and where their approaches diverge. It emphasizes how CIE principles can be used to adapt HA methods, broadening their scope to include cyber risks and enabling the mitigation of cyber- induced impacts alongside traditional hazards and failure scenarios. This report examines how CIE can be applied across various HA methods—such as Hazard and Operability Studies (HAZOP), Probabilistic Risk Assessment (PRA), Failure Modes and Effects Analysis (FMEA), Systems-Theoretic Process Analysis (STPA), Hazard and Consequence Analysis for Digital Systems (HAZCADS), and Layers of Protection Analysis (LOPA). It provides strategies for integrating CIE to strengthen the identification, assessment, and mitigation of cyber-induced risks. The findings offer a structured entry point for organizations to embed CIE concepts into hazards and safety analyses, as well as broader engineering processes, ultimately supporting the design and operation of a more resilient infrastructure.

42 ENGINEERING↗