Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer composite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Multilayer Coextrusion of Polymer Composites to Develop Organic Capacitors

Multilayer coextrusion is applied to produce a tape containing layers of alternating electrical properties to demonstrate the potential for using coextrusion to manufacture capacitors. To obtain the desired properties, we develop two filled polymer systems, one for conductive layers and one for dielectric layers. We describe numerical models used to help determine the material and processing parameters that impact processing and layer stability. These models help quantify the critical ratios of densities and viscosities of the two layers to maintain stable layers, as well as the effect of increasing the flow rate of one of the two materials. The conducting polymer is based on polystyrene filled with a blend of low-melting-point eutectic metal and nickel particulate filler, as described by Mrozek et al. (2010). The appropriate concentrations of fillers are determined by balancing measured conductivity with processability in a twin screw extruder. Based on results of the numerical models and estimates of the viscosity of emulsions and suspensions, a dielectric layer composed of polystyrene filled with barium titanate is formulated. Despite the fact that the density of the dielectric filler is less than the metallic filler of the conductive phase, as well as rheological measurements that later showed that the dielectric formulation is not an ideal match to the viscosity of the conductive material, the two materials can be successfully coextruded if the flow rates of the two materials are not identical. A measurable capacitance of the layered structure is obtained.

36 MATERIALS SCIENCE↗

Hydrogen bonds enhanced composite polymer electrolyte for high-voltage cathode of solid-state lithium battery

Polymer electrolyte is one of the important components for developing advanced solid-state lithium batteries (SSLBs). However, the narrow electrochemical stability window restricts the practical application with high-voltage cathodes. In this study, a series of composite solid electrolytes (CSEs), possessing both wide electrochemical stability window (up to 5.0 V vs. Li + /Li) and high ionic conductivity (over 1.35×10 -3 S/cm at 25 °C), were reported by integrating SiO 2 nanoparticles into poly(vinyl ethylene carbonate) polymer electrolyte. The enhanced anti-oxidation performances are mainly caused and confirmed by the local intermolecular interactions of hydrogen bonds in CSE. Based on this CSE, the SSLBs with LiCoO 2 cathode present good cycle stability at high voltage, and the capacity retention with 4.5 V cut-off voltage is about 94% after 200 cycles. This work not only proves the importance of intermolecular interactions in CSE, but also provides an effective method for achieving high-energy SSLBs with enhanced interface compatibility between polymer electrolyte and highvoltage cathodes

25 ENERGY STORAGE↗

Carbon nanotube polymer composition and devices

A thin film device and compound having an anode, a cathode, and at least one light emitting layer between the anode and cathode, the at least one light emitting layer having at least one carbon nanotube and a conductive polymer.

36 MATERIALS SCIENCE↗

The effect of polymer-induced attraction on dynamical arrests of polymer composites with bimodal particle size distributions

We explore the flow properties of nanocomposite melts where the particles have bimodal size distributions and experience a weak attraction produced by suspending silica particles in polyethylene glycol melts with a molecular weight of 2000 (PEG2000). The polymer is unentangled and adsorbs to the particle surface. Here, the volume fraction ratio of large particles to total particle volume fraction, R, is systematically varied to study the effects of this polymer-induced attraction on suspension rheology. The maximum volume fraction, Φm, of the particles varies in a nonmonotonic manner of R as demonstrated in studies of the same mixtures when suspended in polyethylene glycol with a molecular weight of 400 (PEG400), where the particles experience excluded volume interactions. The dynamical arrest volume fraction Φx, of nanocomposite melts in PEG2000 monotonically increases with R. In frequency sweep experiments, the plateau elastic modulus is dominated by attractive interactions and increases with the total particle volume fraction, Φc, proportionally with 1/(h2< D >), where < D > is the volume average particle diameter and h is the average particle-particle surface separation. As R is varied, this universal yielding behavior occurs at constant surface separation, h, suggesting that the flow properties of the mixtures can be understood as being equivalent to flow properties of homogeneous particle suspensions experiencing short-range attractions with an extent independent of particle size.

36 MATERIALS SCIENCE↗

Porous polymer networks and ion-exchange media and metal-polymer composites made therefrom

Porous polymeric networks and composite materials comprising metal nanoparticles distributed in the polymeric networks are provided. Also provided are methods for using the polymeric networks and the composite materials in liquid- and vapor-phase waste remediation applications. The porous polymeric networks, are highly porous, three-dimensional structures characterized by high surface areas. The polymeric networks comprise polymers polymerized from aldehydes and phenolic molecules.

36 MATERIALS SCIENCE↗

Porous polymer networks and ion-exchange media and metal-polymer composites made therefrom

Porous polymeric networks and composite materials comprising metal nanoparticles distributed in the polymeric networks are provided. Also provided are methods for using the polymeric networks and the composite materials in liquid- and vapor-phase waste remediation applications. The porous polymeric networks, are highly porous, three-dimensional structures characterized by high surface areas. The polymeric networks comprise polymers polymerized from aldehydes and phenolic molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal oxide-polymer composites

A method of making metal oxide clusters in a single stage by reacting a metal oxide with a substoichiometric amount of an acid in the presence of an oxide particle growth terminator and solubilizer. A method of making a ceramer is also disclosed in which the metal oxide clusters are reacted with a functionalized polymer. The resultant metal oxide clusters and ceramers are also disclosed.

Wellinghoff, Stephen T.↗

Metal oxide-polymer composites

A method of making metal oxide clusters in a single stage by reacting a metal oxide with a substoichiometric amount of an acid in the presence of an oxide particle growth terminator and solubilizer. A method of making a ceramer is also disclosed in which the metal oxide clusters are reacted with a functionalized polymer. The resultant metal oxide clusters and ceramers are also disclosed.

Wellinghoff, Stephen T.↗

Ultrathin, flexible, solid polymer composite electrolyte enabled with aligned nanoporous host for lithium batteries

The urgent need for safer batteries is leading research to all-solid-state lithium-based cells. To achieve energy density comparable to liquid electrolyte-based cells, ultrathin and lightweight solid electrolytes with high ionic conductivity are desired. However, solid electrolytes with comparable thicknesses to commercial polymer electrolyte separators (~10 μm) used in liquid electrolytes remain challenging to make because of the increased risk of short-circuiting the battery. In this work, we report on a polymer–polymer solid-state electrolyte design, demonstrated with an 8.6-μm-thick nanoporous polyimide (PI) film filled with polyethylene oxide/lithium bis(trifluoromethanesulfonyl)imide (PEO/LiTFSI) that can be used as a safe solid polymer electrolyte. The PI film is nonflammable and mechanically strong, preventing batteries from short-circuiting even after more than 1,000 h of cycling, and the vertical channels enhance the ionic conductivity (2.3 × 10 -4 S cm -1 at 30 °C) of the infused polymer electrolyte. Lastly, all-solid-state lithium-ion batteries fabricated with PI/PEO/LiTFSI solid electrolyte show good cycling performance (200 cycles at C/2 rate) at 60 °C and withstand abuse tests such as bending, cutting and nail penetration.

25 ENERGY STORAGE↗

Characterizing Photon Reabsorption in Quantum Dot-Polymer Composites for Use as Displacement Sensors

The reabsorption of photoluminescence within a medium, an effect known as the inner filter effect (IFE), has been well studied in solutions, but has garnered less attention in regards to solid-state nanocomposites. Photoluminescence from a quantum dot (QD) can selectively excite larger QDs around it resulting in a net red-shift in the reemitted photon. In CdSe/CdS core/shell QD-polymer nanocomposites, we observe a large spectral red-shift of over a third of the line width of the photoluminescence of the nanocomposites over a distance of 100 μm resulting from the IFE. Unlike fluorescent dyes, which do not show a large IFE red-shift, QDs have a component of inhomogeneous broadening that originates from their size distribution and quantum confinement. By controlling the photoluminescence broadening as well as the sample dispersion and concentration, we show that the magnitude of the IFE within the nanocomposite can be tuned. We further demonstrate that this shift can be exploited in order to spectroscopically monitor the vertical displacement of a nanocomposite in a fluorescence microscope. Large energetic shifts in the measured emission with displacement can be maximized, resulting in a displacement sensor with submicrometer resolution. We further show that the composite can be easily attached to biological samples and is able to measure deformations with high temporal and spatial precision.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanical Testing of Innovated Composite Polymer Material for using in Manufacture of Railway Sleepers

Faculty of Engineering at Shoubra has been funded to start a project for manufacturing railway sleepers from plastic wastes and iron slag to replace imported wooden sleepers. In this paper, performance of wooden sleepers in tracks of Egyptian Railways, including high cost and material defects as well as reasons to find out a new sleeper will be presented. Previous studies for using composite materials in manufacturing railway sleepers are illustrated. Mechanical testing has been carried out to determine the important properties of the new mixture; hence results are compared with the minimum requirements of the international railway standards. Linear analysis has been conducted using 3D-SAP2000 software to simulate the actual performance of the proposed sleeper. It is found that the testing results are larger than the required values. Thus; it is concluded that the tested material is effective and adequate to be used in manufacture of railway sleepers.

36 MATERIALS SCIENCE↗

Cascade synthesis of a gold nanoparticle-network polymer composite

In this paper, the multi-step, cascade synthesis of a self-supporting, hierarchically-structured gold nanoparticle hydrogel composite is described. The composite is spontaneously prepared from a non-covalent, lamellar lyotropic mesophase composed of amphiphiles that support the reactive constituents, a mixture of hydroxyl- and acrylate-end-derivatized PEO 117 -PPO 47 -PEO 117 and [AuCl 4 ] - . The reaction sequence begins with the auto-reduction of aqueous [AuCl 4 ] - by PEO 117 -PPO 47 -PEO 117 which leads to both the production of Au NPs and the free radical initiated polymerization and crosslinking of the acrylate endderivatized PEO 117 -PPO 47 -PEO 117 to yield a network polymer. Optical spectroscopy and TEM monitored the reduction of [AuCl 4 ] - , formation of large aggregated Au NPs and oxidative etching into a final state of dispersed, spherical Au NPs. ATR/FT-IR spectroscopy and thermal analysis confirms acrylate crosslinking to yield the polymer network. X-ray scattering (SAXS and WAXS) monitored the evolution of the multilamellar structured mesophase and revealed the presence of semi-crystalline PEO confined within the water layers. The hydrogel could be reversibly swollen without loss of the well-entrained Au NPs with full recovery of composite structure. Finally, optical spectroscopy shows a notable red shift (Δλ~ 45 nm) in the surface plasmon resonance between swollen and contracted states, demonstrating solvent-mediated modulation of the internal NP packing arrangement.

36 MATERIALS SCIENCE↗

Electricity use in big area additive manufacturing of fiber-reinforced polymer composites

In recent years, additive manufacturing (AM), especially large-format additive manufacturing (LFAM), has gained momentum in the manufacturing industry. While LFAM offers benefits over conventional manufacturing processes, such as minimizing material waste and providing vast geometric freedom, assessing its sustainability remains challenging due to limited data, particularly on energy consumption. Most existing data pertain to small-scale or desktop AM and are not directly applicable to LFAM. In this study, we conducted real-time measurements of electricity usage for a type of LFAM known as big area additive manufacturing (BAAM), which typically uses fiber-reinforced polymer pellets as feedstock. We collected electricity usage data from fifteen printing jobs over two months in an industrial production setting. These data fill the existing gap and can be reused to enhance the community’s understanding of LFAM electricity usage, support further research, and promote sustainable development in advanced manufacturing technologies.

ecology↗

The granular and polymer composite nature of kerogen-rich shale

In the past decade, mechanical, physical, and chemical characterization of reservoir shale rocks, such as the Woodford shale, which is kerogen-rich shale (KRS), has moved toward micro- and nanoscale testing and analyses. Nanoindentation equipment is now widely used in many industrial and university laboratories to measure shale anisotropic Young’s moduli, kerogen stiffness, plastic yield parameters, and other isotropic and anisotropic poromechanical and viscoelastic properties. However, to date, failure analyses of KRS and the effects of organic components on the tensile strength have not been observed or measured at the micro- or nanoscales. In this study, preserved kerogen-rich Woodford shale samples manufactured in micro-beam and micro-pillar geometries were mechanically tested and brought to failure in tension and compression, respectively. These tests were conducted in situ using a nanoindenter inside a scanning electron microscope (SEM). The load versus displacement curves of prismatic micro-cantilever beams were analyzed in light of high-resolution images collected during tensile fracture initiation, propagation, and ultimately sample failure. The micro-pillar geometries were subjected to a uniaxial compressive load and were also brought to failure while capturing measurements of stress and strain. It was found that, within just a few hundred microns of the KRS microcantilever beams, both brittle and ductile failure modes were observed. In the ductile plastic domain, strain-softening and strain-hardening behaviors were identified and characterized. These were not due to confining stress variations, but due to the volume of the organic matter and the way it is interlaced with the shale minerals in and around the failure planes. The tensile strength characteristics and the large modulus of toughness of kerogen, which is a cross-linked polymer, definitely weigh heavily in our engineering field applications, such as hydraulic fracking, which is a Mode I tensile fracture opening and propagation phenomenon. This practice demands that, due to the complex composite nature of KRS, mechanical characterization be not only for unconfined compressive strength but also for unconfined tensile strength and moduli of ruptures. At the end of this study, the need for nanometer scale mechanical characterization of KRS will become apparent. Furthermore, these nano- and micro-scale shale failure tests reinforce our previous understanding of the heterogeneous composite nature of Woodford KRS and its complex behavior, as well as other source shale reservoir formations.

58 GEOSCIENCES↗

Effective conductivity of particulate polymer composite electrolytes using random resistor network method

The effective DC conductivity of particulate composite electrolytes was obtained by solving electrostatics equations using random resistors network method in three dimensions. The composite structure was considered to consist of three phases: matrix, particulate filler, and conductive shell that surrounded each particle; each phase possessing a different conductivity. Different particle size distributions were generated using Monte Carlo simulations. Unlike effective medium formulations, it was shown that the random resistors network method was able to predict percolation thresholds for the effective composite conductivity. It was found that the mean particle radius has a higher influence on the effective composite conductivity compared to the effect of type of the particle size distributions that were considered. The effect of the shell thickness on the composite conductivity has been investigated. It was found that the conductivity enhancement due to the presence of the conductive shell phase becomes less evident as the shell thickness increases.

36 MATERIALS SCIENCE↗

Collection, release, and detection of analytes with polymer composite sampling materials

A unique fiber core sampler composition, related systems, and techniques for designing, making, and using the same are described. The sampler is used to interface with existing field instrumentation, such as Ion Mobility Spectrometer (IMS) equipment. Desired sampler characteristics include its: stiffness/flexibility; thermal mass and conductivity; specific heat; trace substance collection/release dependability, sensitivity and repeatability; thickness; reusability; durability; stability for thermal cleaning; and the like. In one form the sampler has a glass fiber core with a thickness less than 0.3 millimeter that is coated with a polymer including one or more of: polymeric organofluorine, polyimide, polyamide, PolyBenzlmidazole (PBI), PolyDiMethylSiloxane (PDMS), sulfonated tetrafluoroethylene (PFSA) and Poly(2,6-diphenyl-p-phenylene Oxide) (PPPO). Multiple polymer coatings with the same or different polymer types may be included, core/substrate surface functionalization utilized, and/or the core/substrate may be at partially filled with thermally conductive particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗