Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “perturbation analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Substructure Versus Property-Level Dispersed Modes Calculation

This paper calculates the effect of perturbed finite element mass and stiffness values on the eigenvectors and eigenvalues of the finite element model. The structure is perturbed in two ways: at the "subelement" level and at the material property level. In the subelement eigenvalue uncertainty analysis the mass and stiffness of each subelement is perturbed by a factor before being assembled into the global matrices. In the property-level eigenvalue uncertainty analysis all material density and stiffness parameters of the structure are perturbed modified prior to the eigenvalue analysis. The eigenvalue and eigenvector dispersions of each analysis (subelement and property-level) are also calculated using an analytical sensitivity approximation. Two structural models are used to compare these methods: a cantilevered beam model, and a model of the Space Launch System. For each structural model it is shown how well the analytical sensitivity modes approximate the exact modes when the uncertainties are applied at the subelement level and at the property level.

Stewart, Eric C.↗
NASA NTRS1973

A determination of the earth tidal amplitude and phase from the orbital perturbations of the Beacon Explorer C spacecraft

An analysis of the orbital inclination of the Beacon Explorer C spacecraft over a period of nearly five months in 1970 revealed a very clear and distinctive perturbation caused by the earth and ocean tides. The perturbation has a full amplitude of about 1.8 seconds of arc and a period of about 85 days. This amplitude is approximately 15% smaller than would be expected from the solid-earth tide alone and is shifted slightly in phase. The perturbation can be represented almost exactly by a Love number of k sub 2 = 0.245 with a phase lag of 3.2 degrees. The data used were laser range measurements obtained by a NASA Goddard Space Flight Center tracking system in Greenbelt, Maryland.

Smith, D. E.↗
NASA NTRS1977

Updated dispersion analysis for the first Orbital Flight Test (OFT-1) mission

A dispersion analysis considering 3-sigma uncertainties (or perturbations) in platform, vehicle, and environmental parameters was performed for the first orbital flight test (OFT-1) mission. The dispersion analysis is based on the nominal trajectory for the OFT-1 reference flight profile and was performed to determine state vector and performance dispersions (or variations) which result from the indicated 3 sigma uncertainties. The dispersions are determined at major mission events and fixed times from liftoff (time slices). Principal error contributors to the covariance matrix are listed. The dispersion data indicates that the largest position error occurs in the down range component. At main engine cutoff and circularization, the vehicle performance uncertainties are the major contributors to down range error.

Snow, L. S.↗
NASA NTRS1978

Random motion analysis of flexible satellite structures

A singular perturbation formulation is used to study the responses of a flexible satellite when random measurement errors can occur. The random variables, at different instants of time, are assumed to be uncorrelated. Procedures for obtaining maxima and minima are described, and a variation of the linear method is developed for the formal solution of the two-point boundary-value problems represented by the variational equations. Random and deterministic solutions for the structural position coordinates are studied, and an analytic algorithm for treating the force equation of motion is developed. Since the random system indicated by the variational equation will always be asymptotically unstable, any analysis of stability must be based on the deterministic system.

Huang, T. C.↗
NASA NTRS1982

Development of a spinning wave heat engine

A theoretical analysis and an experimental investigation were conducted to assess the feasibility of developing a spinning wave heat engine. Such as engine would utilize a large amplitude traveling acoustic wave rotating around a cylindrica chamber, and it should not suffer from the inefficiency, noise, and intermittent thrust which characterizes pulse jet engines. The objective of this investigation was to determine whether an artificially driven large amplitude spinning transverse wave could induce a steady flow of air through the combustion chamber under cold flow conditions. In the theoretical analysis the Maslen and Moore perturbation technique was extended to study flat cylinders (pancake geometry) with completely open side walls and a central opening. In the parallel experimental study, a test moel was used to determine resonant frequencies and radial pressure distributions, as well as oscillatory and steady flow velocities at the inner and outer peripheries. The experimental frequency was nearly the same as the theoretical acoustic value for a model of the same outer diameter but without a central hole. Although the theoretical analysis did not predict a steady velocity component, simulaneous measurements of hotwire and microphone responses have shown that the spinning wave pumps a mean flow radially outward through the cavity.

Zinn, B. T.↗
NASA NTRS1975

Dispersion analysis for baseline reference mission 1

A dispersion analysis considering 3 sigma uncertainties (or perturbations) in platform, vehicle, and environmental parameters was performed for the baseline reference mission (BRM) 1 of the space shuttle orbiter. The dispersion analysis is based on the nominal trajectory for the BRM 1. State vector and performance dispersions (or variations) which result from the indicated 3 sigma uncertainties were studied. The dispersions were determined at major mission events and fixed times from lift-off (time slices) and the results will be used to evaluate the capability of the vehicle to perform the mission within a 3 sigma level of confidence and to determine flight performance reserves. A computer program is given that was used for dynamic flight simulations of the space shuttle orbiter.

Kuhn, A. E.↗
NASA NTRS1986

Thigmomorphogenesis: anatomical, morphological and mechanical analysis of genetically different sibs of Pinus taeda in response to mechanical perturbation

Twenty-three open pollinated families (half-sibs) and four controlled pollinated families (full-sibs) of Pinus taeda L. (loblolly pine) were grown in a greenhouse and analyzed for changes induced by mechanical perturbation (MP). These changes included inhibition of stem and needle elongation, bracing of branch nodes, and increased radial growth in the direction of the MP. Inhibition of stem elongation was the least variable feature measured. Leaf extension and stem diameter were highly variable between half-sibs. MP induced increased drag in greenhouse grown P. taeda in wind-tunnel tests. In P. taeda, MP induced decreased flexibility and increased elasticity and plasticity of the stem. The increased radial growth of the stems overrode the increase in elasticity, resulting in an overall decrease in flexibility. MP trees had a higher rupture point than non-MP controls. Increased radial growth is a result of more rapid cell divisions of the vascular cambium, resulting in increased numbers of tracheids. The decreased leader growth is partly due to a decreased tracheid length in response to MP.

Non-NASA Center↗
NASA NTRS1986

Mars Observer orbital accuracy analysis

Attention is given to the orbital accuracy of the Mars Observer (MO) spacecraft throughout its 687 days of mapping (scheduled to commence in 1991). The MO's short period and near circular orbit necessitate a multiorbit analysis in which the spacecraft's motion is strongly perturbed by the local and global gravity field of Mars. This analysis attests to the feasibility of achieving an orbital position accuracy at the level of 2-3 km within the data interval. It is found that Very Long Baseline Interferometric data can rectify a situation in which the position accuracy degrades significantly.

Esposito, P. B.↗
NASA NTRS1975

Dispersion analysis for baseline reference mission 3A using powered explicit guidance

A dispersion analysis considering 3 sigma uncertainties (or perturbations) in platform, vehicle, and environmental parameters was performed for baseline reference mission 3A. Powered explicit guidance (PEG) was used to develop closed loop steering commands for this dispersion analysis. The nominal profile for the dispersion analysis is identical to the nominal profile of Reference 1 ascent trajectory with the exception that generalized linear tangent (GLT) guidance is used in Reference 1. Nominal trajectory differences which result from using PEG instead of GLT were determined and dispersion data were developed using PEG for comparison with similar data developed using GLT guidance.

Snow, L. S.↗
NASA NTRS1974

Ground-state energies of simple metals

A structural expansion for the static ground-state energy of a simple metal is derived. Two methods are presented, one an approach based on single-particle band structure which treats the electron gas as a nonlinear dielectric, the other a more general many-particle analysis using finite-temperature perturbation theory. The two methods are compared, and it is shown in detail how band-structure effects, Fermi-surface distortions, and chemical-potential shifts affect the total energy. These are of special interest in corrections to the total energy beyond third order in the electron-ion interaction and hence to systems where differences in energies for various crystal structures are exceptionally small. Preliminary calculations using these methods for the zero-temperature thermodynamic functions of atomic hydrogen are reported.

Hammerberg, J.↗
NASA NTRS1987

A finite difference-time domain technique for modeling narrow apertures in conducting scatterers

The finite difference-time domain (FDTD) technique has proven to be a valuable tool for the calculation of the transient and steady state scattering characteristics of relatively complex scatterer and source configurations. In spite of its usefulness, it exhibits serious deficiencies when used to analyze geometries that contain fine detail. An FDTD technique is described that utilizes Babinet's principle to decouple the regions on both sides of the aperture. The result is an FDTD technique that is capable of modeling apertures that are much smaller than the spatial grid used in the analysis and yet is not perturbed by numerical noise when used in the 'scattered field' mode. Numerical results are presented that show the field penetration through cavity-backed apertures that are much smaller than the spatial grid used during the solution.

Demarest, Kenneth R.↗
NASA NTRS1985

Cellular interface morphologies in directional solidification. III - The effects of heat transfer and solid diffusivity

The shape and stability of two-dimensional finite-amplitude cellular interfaces arising during directional solidification are compared for several solidification models that account differently for latent heat released at the interface, unequal thermal conductivities of melt and solid, and solute diffusivity in the solid. Finite-element analysis and computer-implemented perturbation methods are used to analyze the families of steadily growing cellular forms that evolve from the planar state. In all models a secondary bifurcation between different families of finite-amplitude cells exists that halves the spatial wavelength of the stable interface. The quantitative location of this transition is very dependent on the details of the model. Large amounts of solute diffusion in the solid retard the growth of large-amplitude cells.

Ungar, Lyle H.↗
NASA NTRS2018

Insight and Evidence Motivating the Simplification of Dual-Analysis Hybrid Systems into Single-Analysis Hybrid Systems

Many hybrid data assimilation systems currently used for NWP employ some form of dual-analysis system approach. Typically a hybrid variational analysis is responsible for creating initial conditions for high-resolution forecasts, and an ensemble analysis system is responsible for creating sample perturbations used to form the flow-dependent part of the background error covariance required in the hybrid analysis component. In many of these, the two analysis components employ different methodologies, e.g., variational and ensemble Kalman filter. In such cases, it is not uncommon to have observations treated rather differently between the two analyses components; recentering of the ensemble analysis around the hybrid analysis is used to compensated for such differences. Furthermore, in many cases, the hybrid variational high-resolution system implements some type of four-dimensional approach, whereas the underlying ensemble system relies on a three-dimensional approach, which again introduces discrepancies in the overall system. Connected to these is the expectation that one can reliably estimate observation impact on forecasts issued from hybrid analyses by using an ensemble approach based on the underlying ensemble strategy of dual-analysis systems. Just the realization that the ensemble analysis makes substantially different use of observations as compared to their hybrid counterpart should serve as enough evidence of the implausibility of such expectation. This presentation assembles numerous anecdotal evidence to illustrate the fact that hybrid dual-analysis systems must, at the very minimum, strive for consistent use of the observations in both analysis sub-components. Simpler than that, this work suggests that hybrid systems can reliably be constructed without the need to employ a dual-analysis approach. In practice, the idea of relying on a single analysis system is appealing from a cost-maintenance perspective. More generally, single-analysis systems avoid contradictions such as having to choose one sub-component to generate performance diagnostics to another, possibly not fully consistent, component.

Todling, Ricardo↗
NASA NTRS1984

One-impulse targeting strategy for longitudinal drift control of geosynchronous spacecraft subject to tesseral harmonics and luni-solar gravity perturbations

Kamel's (1973) East-West Stationkeeping Analysis is extended and an algorithm is presented that targets the geosynchronous spacecraft to the ideal initial conditions starting from any given relative longitude deviation within a given tolerance deadband in order to repeat the ideal longitudinal drift cycle that results in the longest possible period of time between maneuvers. The motion description takes into account the perturbations introduced by earth's tesseral harmonics and by the luni-solar gravity, assuming a near-circular orbit that requires only the control of orbital energy to repeat the ideal drift cycle via a single impulsive velocity change. The location of the maneuver along the orbit is such that the post-Delta-V eccentricity is always minimized.

Kechichian, J. A.↗
NASA NTRS1956

Analysis of Laminar Incompressible Flow on Semiporous Channels

Perturbation solutions for laminar incompressible flow in semiporous and fully porous channels are compared. The perturbation parameter measures the amount of suction or blowing at the porous wall. The velocity profile and the wall friction parameter are more affected by suction or blowing for the semiporous channel than for the fully porous channel. For blowing through the wall, the pressure decreases in channel direction for both channels; with sufficiently high suction rates, the analysis showed that the pressure rises in flow direction for the fully porous channel.

PIPES↗
NASA NTRSDate not supplied

Linearized Frequency-Domain Gust Analysis and Adjoint-Based Sensitivities

Gust analysis is added to a linearized frequency-domain method in FUN3D, a NASA computational fluid dynamics solver. The method linearizes about a nonlinear static equilibrium condition and is therefore appropriate for problems with small perturbations such as transonic stochastic gust analysis. In addition to the gust analysis, adjoint-based sensitivities of stochastic gust constraints are implemented for multidisciplinary design optimization. The linearized frequency-domain gust model and adjoint-based sensitivities are described and verified. The method is applied to an optimization for mass minimization of the AGARD 445.6 wing subject to a stochastic gust constraint limiting the displacement of the wing tip.

Aeroelasticity↗
NASA NTRS2020

Designing an Optimal Ensemble Strategy for GMAO S2S Forecast System

The NASA Global Modeling and Assimilation Office (GMAO) Sub-seasonal to Seasonal (S2S) prediction system is being readied for a major upgrade. An important factor in successful extended range forecasting is the definition of the ensemble. Our overall strategy is to run a relatively large ensemble of about 40 members up to 3 months (focusing on the sub-seasonal forecast problem), after which we sub-sample the ensemble, and continue the forecast with about 10 members (up to 12 months). Here we present the results of our testing of various ways to generate the initial perturbations and the validation of a stratified sampling approach for choosing the members of the smaller ensemble. For the initialization of the ensemble we propose a combination of lagged and burst initial conditions. To generate perturbations for the burst ensemble members we used scaled differences of pairs of analysis states (chosen randomly from the corresponding season) separated by 1-10 days. We consider perturbing separately the atmosphere and the ocean, or both. By varying the separation times between the analysis states, we are able to produce perturbations that resemble well-known modes of variability. Focusing on the ENSO SST indices, we found that all types of perturbations are important for the ensemble spread with, however, considerable differences in the timing of the impacts on spread for the atmospheric and oceanic perturbations.Our initial (larger) ensemble size was determined so as to maximize the skill of predicting some of the leading modes of boreal winter atmospheric modes (namely the NAO, PNA and AO). Since it is not feasible for us to run with the larger ensemble beyond about 3 months, we employ a stratified sampling procedure that identifies the emerging directions of error growth to subset the ensemble. By comparing the results from the stratified ensemble with that of the randomly sampled ensemble of the same size, we find that the former provides substantially better estimates the mean of the original large ensemble.

Borovikov, Anna↗