Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Tubular titanium oxide/reduced graphene oxide-sulfur composite for improved performance of lithium sulfur batteries

Lithium sulfur (LiS) batteries are promising alternatives to conventional Li-ion batteries in terms of specific capacity and energy. But, the technical challenges raised from the soluble polysulfide (PS) in organic electrolyte deter their implementation in practical applications. Nanoengineered structure and chemical adsorptive materials hold great promise in mitigating the PS migration problem. We develop a tubular titanium oxide (TiO 2 )/reduced graphene oxide (rGO) composite structure (TG) as a sulfur hosting material for constructing better performed LiS batteries. The TG/sulfur cathode (TG/S) is able to deliver ~1200 mAh g -1 specific capacity with stable operation for over 550 cycles. Moreover, the TG/S composite cathode shows stable Coulombic efficiencies of over ~95% at various C rates, which are ~10% higher than those of the rGO/sulfur (G/S) counterparts. The superior electrochemical performances of TG/S could be ascribed to the synergistic effects between the conductive rGO support and the physically/chemically absorptive TiO 2 , that is, the spatial tubular structure of TiO 2 provides intimate contact and physical confinement for sulfur, while the polar TiO 2 in TG/S shows strong chemical interaction towards the sulfur species.

25 ENERGY STORAGE↗

Improved Performance of GaInNAs Solar Cells Grown by Molecular-Beam Epitaxy Using Increased Growth Rate Instead of Surfactants

GaInNAs is potentially useful for increasing the conversion efficiency of multijunction solar cells if low photocurrents and photovoltages can be increased. Wide-depletion width devices generate significant photocurrents using an n-i-p structure grown by molecular-beam epitaxy, but these wide depletion widths are only realized in a region of parameter space that leads to rough surface morphologies. Surfactants are effective at reducing the surface roughness, but lead to increased defect densities and changes in the net acceptor or donor concentration. Here, we show that increasing the growth rate of GaInNAs solar cells leads to smooth surfaces without the use of a surfactant, even at high In compositions and substrate temperatures. No degradation in material quality is observed when increasing the growth rate from 1.5 to 3.0 {micro}m/h, but a shunt resistance does appear for the high-growth-rate samples. This shunt is attributed to increased spitting of the Ga cell, leading to an increase in the oval defect density, at the higher effusion cell temperatures used to achieve high growth rates. As with the case of Bi in GaInNAs, increased growth rates also appear to increase the net donor concentration, but it is not clear if these effects have the same cause.

14 SOLAR ENERGY↗

Improved performance of dye-sensitized solar cells with surface-treated TiO{sub 2} as a photoelectrode

We report on the effects of surface-modified TiO{sub 2} on the performance of dye-sensitized solar cells (DSSCs). TiO{sub 2} surface was modified with Na{sub 2}CO{sub 3} via a simple dip coating process and the modified TiO{sub 2} was applied to photoelectrodes of DSSCs. By dipping of TiO{sub 2} layer into aqueous Na{sub 2}CO{sub 3} solution, the DSSC showed a power conversion efficiency of 9.98%, compared to that (7.75%) of the reference device without surface treatment. The UV–vis absorption spectra, the impedance spectra and the dark current studies revealed that the increase of all parameters was attributed to the enhanced dye adsorption, the prolonged electron lifetime and the reduced interfacial resistance.

36 MATERIALS SCIENCE↗

Investigation on improved performance of Erbium doped TiO2 nanowire based UV detector

Highlights: • PL study showed the removal of oxygen defects of TiO{sub 2} material after Er doping. • Superior photosensitivity was obtained for Er:TiO{sub 2} NW based detector. • Detectivity and NEP were calculated for both undoped and doped detectors. • Photoswitching was observed for Er:TiO{sub 2} NW detector at 350 nm of wavelength. - Abstract: Undoped TiO{sub 2} and Erbium doped TiO{sub 2} nanowires (Er:TiO{sub 2} NWs) were synthesized on respective thin films using e-beam cum glancing angle deposition technique onto n-type silicon substrates. The length of the NWs was ∼182 nm as calculated from field emission gun scanning electron microscopy images. Transmission electron microscopy showed an average NW length of 173 nm. Polycrystalline nature of both samples was obtained from the selected area electron diffraction analysis as well as from the X-ray diffraction (XRD) analysis. Energy dispersive X-ray spectroscopy and variation in the grain size (calculated from XRD) confirmed the doping of Erbium in case of Er:TiO{sub 2} NWs. Increased absorption, as well as enhanced bandgap, was observed for Er:TiO{sub 2} NWs compared to the undoped TiO{sub 2} NWs. Superior device performance in terms of detectivity, sensitivity and photoswitching was obtained for Er:TiO{sub 2} NWs as compared to the undoped TiO{sub 2} NWs in the UV region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Friction behavior of a multi-interface system and improved performance by AlMgB 14 –TiB 2 –C and diamond-like-carbon coatings

We investigated friction behavior of a bearing system with two interfaces involved: a roller component experiencing rolling–sliding interaction against twin cylinders under point contacts while simultaneously undergoing pure sliding interaction against a socket under a conformal contact. Lubrication modeling predicted a strong correlation between the roller's rolling condition and the system's friction behavior. Experimental observations first validated the analytical predictions using steel and iron components. Diamond-like-carbon (DLC) coating and AlMgB 14 –TiB 2 coating with a carbon topcoat (BAMC) were then applied to the roller and twin cylinders, respectively. In conclusion, testing and analysis results suggest that the coatings effectively decreased the slip ratio for the roller–cylinder contact and the sliding friction at both bearing interfaces and, as a result, significantly reduced the system frictional torque.

42 ENGINEERING↗