SEARCH · Engineering Papers

Results for “needs assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Instrumentation Working Group Summary

The Instrumentation Working Group compiled a summary of measurement techniques applicable to gas turbine engine aerosol precursors and particulates. An assessment was made of the limits, accuracy, applicability, and technology readiness of the various techniques. Despite advances made in emissions characterization of aircraft engines, uncertainties still exist in the mechanisms by which aerosols and particulates are produced in the near-field engine exhaust. To adequately assess current understanding of the formation of sulfuric acid aerosols in the exhaust plumes of gas turbine engines, measurements are required to determine the degree and importance of sulfur oxidation in the turbine and at the engine exit. Ideally, concentrations of all sulfur species would be acquired, with emphasis on SO2 and SO3. Numerous options exist for extractive and non-extractive measurement of SO2 at the engine exit, most of which are well developed. SO2 measurements should be performed first to place an upper bound on the percentage of SO2 oxidation. If extractive and non-extractive techniques indicate that a large amount of the fuel sulfur is not detected as SO2, then efforts are needed to improve techniques for SO3 measurements. Additional work will be required to account for the fuel sulfur in the engine exhaust. Chemical Ionization Mass Spectrometry (CI-MS) measurements need to be pursued, although a careful assessment needs to be made of the sampling line impact on the extracted sample composition. Efforts should also be placed on implementing non-intrusive techniques and extending their capabilities by maximizing exhaust coverage for line-of-sight measurements, as well as development of 2-D techniques, where feasible. Recommendations were made to continue engine exit and combustor measurements of particulates. Particulate measurements should include particle size distribution, mass fraction, hydration properties, and volatile fraction. However, methods to ensure that unaltered samples are obtained need to be developed. Particulate speciation was also assigned a high priority for quantifying the fractions of carbon soot, PAH, refractory materials, metals, sulfates, and nitrates. High priority was also placed on performing a comparison of particle sizing instruments. Concern was expressed by the workshop attendees who routinely make particulate measurements about the variation in number density measured during in-flight tests by different instruments. In some cases, measurements performed by different groups of researchers during the same flight tests showed an order of magnitude variation. Second priority was assigned to measuring concentrations of odd hydrogen and oxidizing species. Since OH, HO2, H2O2, and O are extremely reactive, non-extractive measurements are recommended. A combination of absorption and fluorescence is anticipated to be effective for OH measurements in the combustor and at the engine exit. Extractive measurements of HO2 have been made in the stratosphere, where the ambient level of OH is relatively low. Use of techniques that convert HO2 to OH for combustor and engine exit measurements needs to be evaluated, since the ratio of HO2/OH may be 1% or less at both the combustor and engine exit. CI-MS might be a viable option for H2O2, subject to sampling line conversion issues. However, H2O2 is a low priority oxidizing species in the combustor and at the engine exit. Two candidates for atomic oxygen measurements are Resonance Enhanced Multi-Photon Ionization (REMPI) and Laser-Induced Fluorescence (LIF). Particulate measurement by simultaneous extractive and non-extractive techniques was given equal priority to the oxidizer measurements. Concern was expressed over the ability of typical ground test sampling lines to deliver an unaltered sample to a remotely located instrument. It was suggested that the sampling probe and line losses be checked out by attempting measurements using an optical or non-extractive technique immediately upstream of the sampling probe. This is a possible application for Laser Induced Incandescence (LII) as a check on the volume fraction of soot. Optical measurements of size distribution are not well developed for ultrafine particles less than about 20 nm in diameter, so a non-extractive technique for particulate size distribution cannot be recommended without further development. Carbon dioxide measurements need to be made to complement other extractive measurement techniques. CO2 measurements enable conversion of other species concentrations to emission indices. Carbon monoxide, which acts as a sink for oxidizing species, should be measured using non-extractive techniques. CO can be rapidly converted to CO2 in extractive probes, and a comparison between extractive and non-extractive measurements should be performed. Development of non-extractive techniques would help to assess the degree of CO conversion, and might be needed to improve the concentration measurement accuracy. Measurements of NO(x) will continue to be critical due to the role of NO and NO2 in atmospheric chemistry, and their influence on atmospheric ozone. Time-resolved measurements of temperature, velocity, and species concentrations were included on the list of desired measurement. Thermocouples are typically adequate for engine exit measurements. PIV and LDV are well established for obtaining velocity profiles. The techniques are listed in the accompanying table; are divided into extractive and non-extractive techniques. Efforts were made to include a measurement uncertainty for each technique. An assessment of the technology readiness was included.

Zaller, Michelle↗

NASA NTRS1975

Historical aspects of technology assessment

The historical developments which have brought about changes in the way technology is viewed are discussed. These include: (1) the broadening through the centuries of the social context for technological change and assessment; (2) the growing need since the Industrial Revolution for assessment; (3) the recent deepening awareness of the impacts of technology; (4) the development of social and communal responsibility for technology, and (5) the current growth in the assessment capability.

Kranzberg, M.↗

NASA NTRS2008

The Effect of Reaction Control System Thruster Plume Impingement on Orion Service Module Solar Array Power Production

NASA's new Orion Crew Exploration Vehicle has geometry that orients the reaction control system (RCS) thrusters such that they can impinge upon the surface of Orion's solar array wings (SAW). Plume impingement can cause Paschen discharge, chemical contamination, thermal loading, erosion, and force loading on the SAW surface, especially when the SAWs are in a worst-case orientation (pointed 45 towards the aft end of the vehicle). Preliminary plume impingement assessment methods were needed to determine whether in-depth, timeconsuming calculations were required to assess power loss. Simple methods for assessing power loss as a result of these anomalies were developed to determine whether plume impingement induced power losses were below the assumed contamination loss budget of 2 percent. This paper details the methods that were developed and applies them to Orion's worst-case orientation.

Bury, Kristen M.↗

NASA NTRSDate not supplied

Economic Impact Assessments (EIA) of application of GEOGLOWS in Ecuador: Data Gaps, Limitations and Recommendations

In 2022, the United Nations launched the Early Warnings for All (EW4ALL) Program to establish global early warning systems by 2027. To assess the impact of the substantial $3.1 billion annual investment over five years, EW4ALL will consider factors that will require national coordination for the data needed for these assessments. In 2023, Ecuador was identified as one of the world's most climate-vulnerable countries, emphasizing the need to enhance its early warning systems. In 2020, the SERVIR Amazonia hub implemented the GEOGLOWS streamflow forecast service in collaboration with Ecuador's national meteorological agency (INAMHI). GEOGloWS provides 15-day ensemble forecasts and 80 years of historical streamflow data for every river worldwide through a free web service. The World Meteorological Organization has recognized this initiative as essential in contributing to the UN's call to ensure an 'Early Warning for All' by 2027. In 2023, as part of NASA's continuous efforts to fund research for Policy-Relevant Implementations, an economic impact assessment (EIA) was performed to understand the potential socioeconomic benefits of Early streamflow predictions in Ecuador using the GEOGLOWS service. Preliminary findings highlighted that gaps remain in effectively integrating socioeconomic and Earth observation (EO) data to capture the total value of these predictions. Implementing GEOGLOWS has led to valuable hydrological forecasts; however, the total economic benefits have yet to be documented. This study addresses the gaps and makes recommendations for future work that should focus on capturing the socio-economic benefits and costs associated with these forecasts, including their impact on decision-making at national and local levels. Despite the daily use of GEOGLOWS by key figures, including the President of Ecuador, the need for comprehensive recommendations and assessments is urgent.

Reetwika Basu↗

NASA NTRS2015

Directed Research in Bone Discipline: Refining Previous Research Observations for Space Medicine

Dual-energy X-ray absorptiometry bone mass density, as a sole index, is an insufficient surrogate for fracture; Clinical Practice Guidelines using bone mass density (both World Health Organization and FRAX) are not specific for complicated subjects such as young, healthy persons following prolonged exposure to skeletal unloading (i.e. an attribute of spaceflight); Research data suggest that spaceflight induces changes to astronaut bones that could be profound, possibly irreversible and unlike age-related bone loss on Earth.; There is a need to objectively assess factors across human physiology that are also influenced by spaceflight (e.g., muscle) that contribute to fracture risk. Some of these objective assessments may require innovative technologies, analyses and modeling.; Astronauts are also exposed to novel situations that may overload their bones highlighting a need integrate biomechanics of physical activities into risk assessments.; As we accumulate data, which reflects the biomechanical competence of bone under specific mechanically-loaded scenarios (even activities of daily living), BONE expects Bone Fracture Module to be more sensitive and/or have less uncertainty in its assessments of fracture probability.; Fracture probability drives the requirement for countermeasures. Level of evidence will unlikely be obtained; hence, the Bone Research and Clinical Advisory Panel (like a Data Safety Monitoring Board) will provide the recommendations.

Sibonga, Jean D.↗

NASA NTRS2012

Global Characterization and Monitoring of Forest Cover Using Landsat Data: Opportunities and Challenges

The compilation of global Landsat data-sets and the ever-lowering costs of computing now make it feasible to monitor the Earth's land cover at Landsat resolutions of 30 m. In this article, we describe the methods to create global products of forest cover and cover change at Landsat resolutions. Nevertheless, there are many challenges in ensuring the creation of high-quality products. And we propose various ways in which the challenges can be overcome. Among the challenges are the need for atmospheric correction, incorrect calibration coefficients in some of the data-sets, the different phenologies between compilations, the need for terrain correction, the lack of consistent reference data for training and accuracy assessment, and the need for highly automated characterization and change detection. We propose and evaluate the creation and use of surface reflectance products, improved selection of scenes to reduce phenological differences, terrain illumination correction, automated training selection, and the use of information extraction procedures robust to errors in training data along with several other issues. At several stages we use Moderate Resolution Spectroradiometer data and products to assist our analysis. A global working prototype product of forest cover and forest cover change is included.

Global↗

NASA NTRS1991

Science requirements and feasibility/design studies of a very-high-altitude aircraft for atmospheric research

The advantages and shortcomings of currently available aircraft for use in very high altitude missions to study such problems as polar ozone or stratosphere-troposphere exchange pose the question of whether to develop advanced aircraft for atmospheric research. To answer this question, NASA conducted a workshop to determine science needs and feasibility/design studies to assess whether and how those needs could be met. It was determined that there was a need for an aircraft that could cruise at an altitude of 30 km with a range of 6,000 miles with vertical profiling down to 10 km and back at remote points and carry a payload of 3,000 lbs.

Russell, Philip B.↗

NASA NTRS1975

Comparison of 70 deg tilt, LBNP, and passive standing as measures of orthostatic tolerance

The present study was performed to assess the reliability of lower body negative pressure (LBNP) as a test of orthostatic tolerance. The need for this assessment arose from the prior observation in this laboratory that some subjects show wide day-to-day variation in heart rate responses to LBNP. The extent of these variations was so great as to raise a serious question as to the value of LBNP as a measure of study-induced alterations (e.g., those produced by bedrest or weightlessness) in orthostatic tolerance. Five healthy volunteers were subjected to a series of tests, consisting of 70 deg tilt, LBNP, and passive standing, on three occasions preceding and three occasions following a 2-week period of bedrest. Study results show that it is possible to subdivide the volunteers into subgroups which show either great or little day-to-day variability in any of the three tests. All three tests revealed bedrest-induced alterations in orthostatic tolerance quite adequately. Of the three tests studied, LBNP most frequently resulted in the largest test-induced heart rate alterations, followed by quiet standing and, finally 70 deg tilt.

Hyatt, K. H.↗

NASA NTRS1981

Relation of NEEDS to OSTA

The NEEDS program was examined, the interfaces between OSTA and NEEDS were identified, and the responsiveness of the NEEDS program to OSTA technological requirements were assessed. Existing and planned NEEDS elements are discussed.

Source record↗

NASA NTRS2016

Ice Accretions and Full-Scale Iced Aerodynamic Performance Data for a Two-Dimensional NACA 23012 Airfoil

This report documents the data collected during the large wind tunnel campaigns conducted as part of the SUNSET project (StUdies oN Scaling EffecTs due to ice) also known as the Ice-Accretion Aerodynamics Simulation study: a joint effort by NASA, the Office National d'Etudes et Recherches Aérospatiales (ONERA), and the University of Illinois. These data form a benchmark database of full-scale ice accretions and corresponding ice-contaminated aerodynamic performance data for a two-dimensional (2D) NACA 23012 airfoil. The wider research effort also included an analysis of ice-contaminated aerodynamics that categorized ice accretions by aerodynamic effects and an investigation of subscale, low- Reynolds-number ice-contaminated aerodynamics for the NACA 23012 airfoil. The low-Reynolds-number investigation included an analysis of the geometric fidelity needed to reliably assess aerodynamic effects of airfoil icing using artificial ice shapes. Included herein are records of the ice accreted during campaigns in NASA Glenn Research Center's Icing Research Tunnel (IRT). Two different 2D NACA 23012 airfoil models were used during these campaigns; an 18-in. (45.7-cm) chord (subscale) model and a 72-in. (182.9-cm) chord (full-scale) model. The aircraft icing conditions used during these campaigns were selected from the Federal Aviation Administration's (FAA's) Code of Federal Regulations (CFR) Part 25 Appendix C icing envelopes. The records include the test conditions, photographs of the ice accreted, tracings of the ice, and ice depth measurements. Model coordinates and pressure tap locations are also presented. Also included herein are the data recorded during a wind tunnel campaign conducted in the F1 Subsonic Pressurized Wind Tunnel of ONERA. The F1 tunnel is a pressured, high- Reynolds-number facility that could accommodate the full-scale (72-in. (182.9-cm) chord) 2D NACA 23012 model. Molds were made of the ice accreted during selected test runs of the full-scale model in the IRT. From these molds, castings were made that closely replicated the features of the accreted ice. The castings were then mounted on the full-scale model in the F1 tunnel, and aerodynamic performance measurements were made using model surface pressure taps, the facility force balance system, and a large wake rake designed specifically for these tests. Tests were run over a range of Reynolds and Mach numbers. For each run, the model was rotated over a range of angles-of-attack that included airfoil stall. The benchmark data collected during these campaigns were, and continue to be, used for various purposes. The full-scale data form a unique, ice-accretion and associated aerodynamic performance dataset that can be used as a reference when addressing concerns regarding the use of subscale ice-accretion data to assess full-scale icing effects. Further, the data may be used in the development or enhancement of both ice-accretion prediction codes and computational fluid dynamic codes when applied to study the effects of icing. Finally, as was done in the wider study, the data may be used to help determine the level of geometric fidelity needed for artificial ice used to assess aerodynamic degradation due to aircraft icing. The structured, multifaceted approach used in this research effort provides a unique perspective on the aerodynamic effects of aircraft icing. The data presented in this report are available in electronic form upon formal approval by proper NASA and ONERA authorities.

Addy, Harold E., Jr.↗

NASA NTRS2020

Capabilities Development: From International Space Station and the Moon to Mars

The President of the United States, in signing Space Policy Directive-1, directed the NASA Administrator “to lead an innovative and sustainable program of exploration with commercial and international partners to enable human expansion across the solar system and to bring back to Earth new knowledge and opportunities. Beginning with missions beyond low-Earth orbit (LEO), the United States will lead the return of humans to the Moon for long-term exploration and utilization, followed by human missions to Mars and other destinations.” NASA is charged to land American astronauts on the lunar South Pole in 2024 and to continue a campaign of sustainable lunar surface exploration in order to develop necessary technologies and capabilities to enable initial human missions to Mars. NASA’s lunar surface exploration plans are part of a continuum of activities utilizing platforms in low Earth orbit (LEO), cislunar space, and the lunar surface to demonstrate advanced technologies, advance operations concepts, and develop countermeasures to lessen the impacts of the space environment and long duration exposure on the crew working in space. NASA is using a capability-driven approach to identify critical gaps to be addressed as part of a focused program to reduce risk for future deep space exploration missions building to eventual human missions to the surface of Mars. Teams of discipline experts from across NASA identify capability gaps between the current state of the art and the needs of proposed exploration missions and develop integrated strategies and roadmaps for filling those gaps. These inputs include assessment of platform needs for demonstration and testing of new capabilities. Generally, the International Space Station (ISS) and Gateway are needed for demonstration of capabilities for Mars transit, while Lunar surface activities focus on development of capabilities and operational protocols for Mars surface. This paper discusses the activities required to advance critical exploration capabilities, focusing on selection of demonstration and test location based upon the unique environments and characteristics of the ISS, Gateway, and potential lunar surface assets. The optimal strategy will be a combination of ISS/LEO, Gateway, and lunar surface testing; however, not all capabilities require a deep space exploration missions.

Boggs, Kathleen Gallagher↗

NASA NTRS1999

Multimodal Preception and Multicriterion Control of Nested Systems: A Functional Visual Assessment Test for Human Health Maintenance and Countermeasure Evaluation - 3

Our theoretical and empirical research on the whole-body coordination during locomotion led to a Phase 1 SBIR grant from NASA JSC. The purpose of the SBIR grant was to design an innovative system for evaluating eye-head-trunk coordination during whole-body perturbations that are characteristic of locomotion. The approach we used to satisfy the Phase 1 objectives was based on a structured methodology for the development of human-systems technology. Accordingly the project was broken down into a number of tasks and subtasks. In sequence, the major tasks were: (1) identify needs for functional assessment of visual acuity under conditions involving whole-body perturbation within the NASA Space Medical Monitoring and Countermeasures (SMMaC) program and in other related markets; (2) analyze the needs into the causes and symptoms of impaired visual acuity under conditions involving whole-body perturbation; (3) translate the analyzed needs into technology requirements for the Functional Visual Assessment Test (FVAT); (4) identify candidate technology solutions and implementations of FVAT; and (5) prioritize and select technology solutions. The work conducted in these tasks is described in this final volume of the series on Multimodal Perception and Multicriterion Control of Nested Systems. While prior volumes (1 and 2) in the series focus on theoretical foundations and novel data-analytic techniques, this volume addresses technology that is necessary for minimally intrusive data collection and near-real-time data analysis and display.

Riccio, Gary E.↗

NASA NTRS2009

Developing a Model-based Capability to Analyze Requirements for the Climate Observing System

Models are foundational for estimating states of the earth's climate system, both as tools to extrapolate information in time and space, and as observation 'operators' used to relate what is analyzed and predicted to what is observed. Expanding the simulation approach further, observing system simulation experiments (OSSEs) are designed to mimic the complete process of analyzing the climate state by replacing real observations with entirely simulated ones determined from a model-based depiction of nature. OSSEs provide a framework to 'fly' simulated satellite instruments through a synthetic atmosphere and investigate the trade-spaces of measurements for various satellite configurations and sampling strategies, and assess their measurement impact on modeling and forecasting capabilities. Such a tool is a crucial but as yet unfulfilled need for future mission selection and design. The components of a state-of-the-art OSSE system are being assembled at the Global Modeling and Assimilation Office (GMAO, Code 610.1) at NASA/GSFC, leveraging on the GMAO's existing modeling and data assimilation infrastructure for numerical weather prediction (NWP). The OSSE framework is based on the GMAO's Goddard Earth Observing System atmospheric general circulation model, version 5 (GEOS-5) and the Gridpoint Statistical Interpolation (GSI) observational analysis scheme, combined with the Goddard Chemistry, Aerosol, Radiation, and Transport (GOCART) model developed by the Atmospheric Chemistry and Dynamics Branch (Code 613.3). This system is an evolving, key component of Goddard's planned development of an Integrated Earth System Analysis (IESA) capability, which will bring together into a single, fully interactive system Goddard's modeling and assimilation efforts in atmosphere, ocean and chemistry and aerosols to provide a comprehensive analysis and prediction system for weather and climate In addition to providing a state-of-the-art capability for assimilating current observation types, GEOS-5, and the future IESA, provide the capability to identify the need for, and assess the potential impact of, future observing systems under consideration for improving weather and climate prediction.

Gelaro, Ronald↗

NASA NTRS2010

Random Vibrations

Ares I Zonal Random vibration environments due to acoustic impingement and combustion processes are develop for liftoff, ascent and reentry. Random Vibration test criteria for Ares I Upper Stage pyrotechnic components are developed by enveloping the applicable zonal environments where each component is located. Random vibration tests will be conducted to assure that these components will survive and function appropriately after exposure to the expected vibration environments. Methodology: Random Vibration test criteria for Ares I Upper Stage pyrotechnic components were desired that would envelope all the applicable environments where each component was located. Applicable Ares I Vehicle drawings and design information needed to be assessed to determine the location(s) for each component on the Ares I Upper Stage. Design and test criteria needed to be developed by plotting and enveloping the applicable environments using Microsoft Excel Spreadsheet Software and documenting them in a report Using Microsoft Word Processing Software. Conclusion: Random vibration liftoff, ascent, and green run design & test criteria for the Upper Stage Pyrotechnic Components were developed by using Microsoft Excel to envelope zonal environments applicable to each component. Results were transferred from Excel into a report using Microsoft Word. After the report is reviewed and edited by my mentor it will be submitted for publication as an attachment to a memorandum. Pyrotechnic component designers will extract criteria from my report for incorporation into the design and test specifications for components. Eventually the hardware will be tested to the environments I developed to assure that the components will survive and function appropriately after exposure to the expected vibration environments.

Messaro. Semma↗

NASA NTRS1984

An integrated GIS/remote sensing data base in North Cache soil conservation district, Utah: A pilot project for the Utah Department of Agriculture's RIMS (Resource Inventory and Monitoring System)

A basic geographic information system (GIS) for the North Cache Soil Conservation District (SCD) was sought for selected resource problems. Since the resource management issues in the North Cache SCD are very complex, it is not feasible in the initial phase to generate all the physical, socioeconomic, and political baseline data needed for resolving all management issues. A selection of critical varables becomes essential. Thus, there are foud specific objectives: (1) assess resource management needs and determine which resource factors ae most fundamental for building a beginning data base; (2) evaluate the variety of data gathering and analysis techniques for the resource factors selected; (3) incorporate the resulting data into a useful and efficient digital data base; and (4) demonstrate the application of the data base to selected real world resoource management issues.

Wheeler, D. J.↗

NASA NTRS2015

Assessing the Amazon Cloud Suitability for CLARREO's Computational Needs

In this document we compare the performance of the Amazon Web Services (AWS), also known as Amazon Cloud, with the CLARREO (Climate Absolute Radiance and Refractivity Observatory) cluster and assess its suitability for computational needs of the CLARREO mission. A benchmark executable to process one month and one year of PARASOL (Polarization and Anistropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar) data was used. With the optimal AWS configuration, adequate data-processing times, comparable to the CLARREO cluster, were found. The assessment of alternatives to the CLARREO cluster continues and several options, such as a NASA-based cluster, are being considered.

Goldin, Daniel↗

NASA NTRS2021

Gaps List KSC Space Crop Production Project Scientist: Interview Evaluation

The Space Crop Production (SCP) Program at the NASA Kennedy Space Center (KSC) is aimed at achieving nutrient supplementation and moving towards caloric independence from Earth by growing crops for astronauts. However, growing crops outside of Earth’s orbit creates many new challenges. The KCS SCP Project Scientists have developed a method of organizing these challenges, called the Gaps List. This Gaps List is a dynamic, taxonomically arranged list of missing knowledge and technologies needed to reach production goals. The purpose of this evaluation was to assess the effectiveness and current research coverage of the Gaps List by using it to document KSC SCP Program research. It was determined that there are several needs within the SCP Program that are not being met, as well as, many deficiencies within the Gaps List. Gaps involving hardware were largely unrecognized by both the KSC researchers and the funding sources that would typically support them. The KSC SCP Project will require more engineering and physical sciences support to fill those gaps. The Gaps List was found to be out of date and in need of rearrangement. A recommendation from this review was that the Gaps List be reassessed at regular intervals to ensure all gaps, and relevant research topics are included. To better understand the gaps within the list, any assessment needs to include a measure of priority, dependency, and breadth. These measures may be included within or alongside the current taxonomical arrangement of the Gaps List.

Chloe Sophia Alexander↗

NASA NTRSDate not supplied

Gaps List KSC Space Crop Production Project Scientist: Interview Evaluation

Chloe S. Alexander↗