Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Morphology and mixing of black carbon particles collected in central California during the CARES field study

Aerosol absorption is strongly dependent on the internal heterogeneity (mixing state) and morphology of individual particles containing black carbon (BC) and other non-absorbing species. Here, we examine an extensive microscopic data set collected in the California Central Valley during the CARES 2010 field campaign. During a period of high photochemical activity and pollution buildup, the particle mixing state and morphology were characterized using scanning transmission X-ray microscopy (STXM) at the carbon K-edge. Observations of compacted BC core morphologies and thick organic coatings at both urban and rural sites provide evidence of the aged nature of particles, highlighting the importance of highly aged particles at urban sites during periods of high photochemical activity. Based on the observation of thick coatings and more convex BC inclusion morphology, either the aging was rapid or the contribution of fresh BC emissions at the urban site was relatively small compared to background concentrations. Most particles were observed to have the BC inclusion close to the center of the host. However, host particles containing inorganic rich inclusions had the BC inclusion closer to the edge of the particle. Furthermore, these measurements of BC morphology and mixing state provide important constraints for the morphological effects on BC optical properties expected in aged urban plumes.

54 ENVIRONMENTAL SCIENCES↗

Martian fresh crater morphology and morphometry - A pre-Viking review

A brief review of Martian crater data is presented and a short summary is provided of Martian fresh crater morphology and morphometry based on pre-Viking information. The pre-Viking Mars missions are considered, taking into account the flyby of Mariner 4 in July 1965, the flyby of Mariner 6 in July 1969, the flyby of Mariner 7 in August 1969, and the insertion of Mariner 9 into a Martian orbit in November 1971. The 7329 photographs of the planet and its moons transmitted by Mariner 9 to earth provide a substantial basis for formulating a large body of data on crater morphometry, morphology, and location. In general, fresh Martian crater morphology follows a diameter-dependent progression. The simplest morphology is found in the smallest craters. The morphology remains essentially constant through diameters of approximately 10 km. Morphologies rapidly become more complex in the diameter range of 10-40 km.

Cintala, M. J.↗

Variations in interior morphology of 15-20 km lunar craters - Implications for a major subsurface discontinuity

Craters vary in morphology as a function of crater diameter, age, and mode of origin. This study concentrates on the morphology of young lunar impact craters within a limited size range. Elimination of morphologic variations generally attributed to crater size or age leaves a small population which should nearly reflect the varying properties of the lunar substrate. The sample consists of 17 craters 15-20 km in diameter with both simple and complex morphologies. While depth/diameter ratios do not obviously differ between mare and highland subsets, apparent depth, rim height, and profile data do differ distinctly. Highland craters tend to be deep, simple, and bowl-shaped. Mare craters tend to be shallow and flat-floored. Rim heights of complex mare craters are typically greater than those of simple craters. Differences of highland and mare crater morphologies are attributed to variations in the thickness of the lunar megaregolith. Highland craters in this size range do not penetrate the megaregolith. The depth and morphology of complex craters are controlled by the discontinuity at the transition from highly brecciated megaregolith to more coherent crystalline material of the upper crust.

De Hon, R. A.↗

The striking near-infrared morphology of the inner region in M100

New optical and near-infrared (NIR) K-band images of the inner 3 kpc region of the nearby Virgo spiral M100 (NGC 4321) display remarkable morphological changes with wavelength. While in the optical the light is dominated by circumnuclear zone of enhanced star formation, the morphological features in the 2.2 micrometer image correspond to a newly discovered kiloparsec-size stellar bar and a pair of leading arms situated inside an ovally shaped region. Analysis of the K image confirms its symmetry: only a very small percentage of the flux, some 5%, is emitted in antisymmetric structures. This indicates that the overall morphology observed in the NIR is dominated by a global density wave. Making a first-order correction for the presence of localized dust extinction in the K light using the I-K image, we find that the observed leading arm morphology is not caused or enhanced but in fact slightly hidden by dust. Possible mechanisms responsible for the optical and NIR morphology are discussed, and tests are proposed to discriminate between them. Our dynamical conclusions are supported with an evolutionary stellar population model reproducing the observed optical and NIR colors in a number of star-forming zones. We argue that the observed morphology is compatible with the presence of a pair of inner Lindblad resonances in the region and show this explicitly in an accompanying paper by detailed numerical modeling. The phenomena observed in NGC 4321 may provide insight into physical process leading to central activity in galaxies.

Knapen, J. H.↗

Comparing Galaxy Morphology at Ultraviolet and Optical Wavelengths

We have undertaken an imaging survey of 34 nearby galaxies in far-ultraviolet (FUV, - 1500A) and optical (UBVRI) passbands to characterize galaxy morphology as a function of wavelength. This sample, which includes a range of classical Hubble types from elliptical to irregular with emphasis on spirals at low inclination angle, provides a valuable database for comparison with images of high-z galaxies whose FUV light is redshifted into the optical and, near-infrared bands. Ultraviolet data are from the UIT Astro-2 mission. We present images and surface brightness profiles for each galaxy, and we discuss the wavelength-dependence of morphology for different Hubble types in the context of understanding high-z objects. In general, the dominance of young stars in the FUV produces the patchy appearance of a morphological type later than that inferred from optical images. Prominent rings and circumnuclear star formation regions are clearly evident in FUV images of spirals, while bulges, bars, and old, red stellar disks are faint to invisible at these short wavelengths. However, the magnitude of the change in apparent morphology ranges from dramatic in early-type spirals with prominent optical bulges to slight in late-type spirals and irregulars, in which young stars dominate both the UV and optical emission. Starburst galaxies with centrally concentrated, symmetric bursts display an apparent "E/SO" structure in the FUV, while starbursts associated with rings or mergers produce a peculiar morphology. We briefly discuss the inadequacy of the optically-defined Hubble sequence to describe FUV galaxy images and estimate morphological k-corrections, and we suggest some directions for future research with this dataset.

Stecher, Theodore↗

Analysis of Europan Cycloid Morphology and Implications for Formation Mechanisms

Europa's highly fractured crust has been shown to contain features with a range of differing morphologies. Most lineaments on Europa are believed to have initiated as cracks, although the type of cracking (e.g. tensile vs. shear) remains unclear and may vary for different morphologies. Arcuate lineaments, called cycloids or flexi, have been observed in nearly all imaged regions of Europa and have been modeled as tensile fractures that were initiated in response to diurnal variations in tides. Despite this hypothesis about the formation mechanism, there have been no detailed analyses of the variable morphologies of cycloids. We have examined Galileo images of numerous locations on Europa to develop a catalog of the different morphologies of cycloids. This study focuses on variations in morphology along individual cycloid segments and differences in cusp styles between segments, while illustrating how morphologic evidence can help unravel formation mechanisms. In so doing, we present evidence for cycloid cusps forming due to secondary fracturing during strike-slip sliding on pre-existing cycloid segments.

Marshall, S. T.↗

Application of morphological synthesis for understanding electrode microstructure evolution as a function of applied charge/discharge cycles

Morphological analysis and synthesis operations were employed for analysis of electrode microstructure transformations and evolution accompanying the application of charge/discharge cycles to electrochemical storage systems (batteries). Using state-of-the-art morphological algorithms, it was possible to predict microstructure evolution in porous Si electrodes for Li-ion batteries with sufficient accuracy. Algorithms for image analyses (segmentation, feature extraction, and 3D-reconstructions using 2D-images) were also developed. Altogether, these techniques could be considered supplementary to phase-field mesoscopic approach to microstructure evolution that is based upon clear and definitive changes in the appearance of microstructure. However, unlike in phase-field, the governing equations for morphological approach are geometry-, not physics-based. Similar non-physics based approach to understanding different phenomena was attempted with the introduction of cellular automata. It is anticipated that morphological synthesis and analysis will represent a useful supplementary tool to phase-field and will render assistance to unraveling the underlying microstructure-property relationships. The paper contains data on electrochemical characterization of different electrode materials that was conducted in parallel to morphological study.

25 ENERGY STORAGE↗

Effects of hypergravity on adipose-derived stem cell morphology, mechanical property and proliferation

Alteration in specific inertial conditions can lead to changes in morphology, proliferation, mechanical properties and cytoskeleton of cells. In this report, the effects of hypergravity on morphology of Adipose-Derived Stem Cells (ADSCs) are indicated. ADSCs were repeatedly exposed to discontinuous hypergravity conditions of 10 g, 20 g, 40 g and 60 g by utilizing centrifuge (three times of 20 min exposure, with an interval of 40 min at 1 g). Cell morphology in terms of length, width and cell elongation index and cytoskeleton of actin filaments and microtubules were analyzed by image processing. Consistent changes observed in cell elongation index as morphological change. Moreover, cell proliferation was assessed and mechanical properties of cells in case of elastic modulus of cells were evaluated by Atomic Force Microscopy. Increase in proliferation and decrease in elastic modulus of cells are further results of this study. Staining ADSC was done to show changes in cytoskeleton of the cells associated to hypergravity condition specifically in microfilament and microtubule components. After exposing to hypergravity, significant changes were observed in microfilaments and microtubule density as components of cytoskeleton. It was concluded that there could be a relationship between changes in morphology and MFs as the main component of the cells. - Highlights: • Hypergravity (10 g, 20 g, 40 g and 60 g) affects on adipose derived stem cells (ADSCs). • ADSCs after exposure to the hypergravity are more slender. • The height of ADSCs increases in all test groups comparing their control group. • Hypergravity decreases ADSCs modulus of elasticity and cell actin fiber content. • Hypergravity enhances proliferation rate of ADSCs.

60 APPLIED LIFE SCIENCES↗

Topological Frustration as a New Parameter to Tune Morphology Revealed through Exploring the Continuum between A-B-C 3-Arm Star and Linear Triblock Polymers

Block polymers assemble into a variety of phase-separated morphologies based on volume fraction (φ) and interactions (χ) of the respective blocks. The arrangement of three different polymer blocks could either be a 3-arm star, with each block having one terminus attached to a common junction point or a linear A-B-C architecture. A versatile strategy is reported to synthesize a series of well-defined graft polymers that lie along the unexplored continuum between a 3-arm star and an A-B-C linear triblock polymer architecture. Using the technique of single-molecule insertion, precise control over the position of graft arm C along the B chain was achieved. A series of discrete graft polymers (PMMA-b-PS-g-PEO) with fixed φ and prescribed ω values that lie on the continuum between a 3-arm star (ω = 0) and linear triblock polymer (ω = 1) were synthesized. Morphological studies using small-angle X-ray scattering and conventional and energy-filtered transmission electron microscopy reveal the transition between lamellae, perforated lamellae, and cylindrical morphologies with systematic variation in the ω values, a trend attributed to the topological frustration and the associated χ values between the three blocks. Molecular dynamic simulations of coarse-grained models were found to predict phase diagrams that are consistent with the experimentally observed morphologies. Furthermore, our results suggest that changes in ω lead to topological frustration which is an important additional new design parameter that can be used to tune the morphology of multiblock polymers in addition to φ and χ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent Additives: Key Morphology-Directing Agents for Solution-Processed Organic Solar Cells

By affecting film formation during the solution processing, solvent additives can provide fine control of the active layer morphology of organic photovoltaics. As such, solvent additives form a versatile method of experimental control for enhancing organic solar cell device performance. In this review, we provide a brief history of bulk heterojunction organic photovoltaics (OPV) processed from solution and the advent of solvent additives, putting them into context with other morphology directing agents. We present our current understanding of how solvent additives impact various mechanisms of phase separation, enabled by recent advances in morphology characterization by in situ X-ray scattering, absorbance and reflectometry. Indeed, understanding solvent additives’ effects on film formation has allowed them to be applied and combined effectively and synergistically to boost OPV performance. Their success as a morphology control strategy has also prompted the use of solvent additives in related organic semiconductor technologies. Finally, we discuss the role of solvent additives in the development of next-generation OPV active layers. In conclusion, despite concerns over their environmental toxicity and role in photo-instability, solvent additives will likely remain relevant morphological directing agents as research interests evolve toward non-fullerene acceptors, ternary blends and environmentally sustainable solvents.

36 MATERIALS SCIENCE↗

Utilization of the Critic Subnetwork of a Generative Adversarial Network as Detector of Morphological Material Change in Image Data

The resolution of computed tomography (CT) has become high enough to monitor morphological changes due to aging in materials in long-term applications. For this work, we explored the utility of the critic of a generative adversarial network (GAN) to automatically detect such changes. The GAN was trained with images of pristine Pharmatose, which is used as a surrogate energetic material. It is important to note that images of the material with altered morphology were only used during the test phase. The GAN-generated images reproduced the microstructure of Pharmatose well, although some unrealistic particle fusion was seen. Calculated morphological metrics (volume fraction, interfacial line length, and local thickness) for the synthetic images also showed good agreement with the training data, albeit with signs of mode collapse in the interfacial line length. While the critic exposed changes in particle size, it showed limited ability to distinguish images by particle shape. The detection of shape differences was also a more challenging task for the selected morphological metrics that related to energetic material performance. We further tested the critic with images of aged Pharmatose. Subtle changes due to aging are difficult for the human analyst to detect; but both critic and morphological metrics analysis showed image differentiation.

36 MATERIALS SCIENCE↗

A Systematic Review of Protocols for the Three-Dimensional Morphologic Assessment of Abdominal Aortic Aneurysms Using Computed Tomographic Angiography

The morphology of infrarenal abdominal aortic aneurysms (AAAs) directly influences the perioperative outcome and long-term durability of endovascular aneurysm repair. A variety of methods have been proposed for the characterization of AAA morphology using reconstructed three-dimensional (3D) computed tomography (CT) images. At present, there is lack of consensus as to which of these methods is most applicable to clinical practice or research. The purpose of this review was to evaluate existing protocols that used 3D CT images in the assessment of various aspects of AAA morphology. An electronic search was performed, from January 1996 to the end of October 2010, using the Embase and Medline databases. The literature review conformed to PRISMA statement standards. The literature search identified 604 articles, of which 31 studies met inclusion criteria. Only 15 of 31 studies objectively assessed reproducibility. Existing published protocols were insufficient to define a single evidence-based methodology for preoperative assessment of AAA morphology. Further development and expert consensus are required to establish a standardized and validated protocol to determine precisely how morphology relates to outcomes after endovascular aneurysm repair.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment

Experimental work has been done to determine changes in the particle shape of portlandite grown in the presence of different ions. To quantify the experimentally observed changes in morphology a new analysis tool was developed, allowing the calculation of the relative surface energies of the crystal facets. The observed morphology in the presence of chlorides and nitrates was facetted particles of a similar shape, the addition of sulfates leads to hexagonal platelet morphology and the addition of silicates leads to the formation of large irregular aggregates. In addition to the experimental work, the surfaces of portlandite were studied with atomistic simulation techniques. The empirical force field used has first been validated. The equilibrium morphology of portlandite in vacuum and in water was then calculated. The results indicate that the presence of water stabilizes the [20.3] surface and changes the morphology. This is consistent with the experimental observation of [20.3] surfaces.

36 MATERIALS SCIENCE↗

Synthesis of morphology-controllable mesoporous Co{sub 3}O{sub 4} and CeO{sub 2}

Recently, extensive works have been devoted to the morphology control of mesoporous materials with respect to their use in various applications. In this paper, we used two kinds of mesoporous silica, SBA-15 rods and spheres as hard templates to synthesize morphology-controllable mesoporous metal oxides. By carefully controlling the loading of metal precursors in the mesopores of the hard template, mesoporous Co{sub 3}O{sub 4} and CeO{sub 2} with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were conveniently obtained. The structural properties of these materials were characterized by XRD, BET, SEM and TEM. In addition, it is found that the differences observed in the textural properties of the two mesoporous metal oxides nanocasted from the same template can be attributed to the properties of metal precursors and the interaction between metal oxide and SiO{sub 2}. Thus-obtained mesoporous metal oxides with such special morphologies may have a potential application in the field of environmental catalytic oxidation. - Graphical Abstract: Mesoporous Co{sub 3}O{sub 4} and CeO{sub 2} with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were synthesized by nanocasting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Damage morphology study of high cycle fatigued as-cast Mg–3.0Nd–0.2Zn–Zr (wt.%) alloy

Laser scanning confocal microscopy (LSCM) and Electron back-scattered diffraction (EBSD) were applied to the study of surface morphology variation of as-cast Mg–3.0Nd–0.2Zn–Zr (NZ30K) (wt.%) alloy under tension-compression fatigue test at room temperature. Two kinds of typical damage morphologies were observed in fatigued NZ30K alloy: One was parallel lines on basal planes led by the cumulation of basal slips, called persistent slip markings (PSMs), and the other was lens shaped, thicker and in less density, led by the formation of twinning. The surface fatigue damage morphology evolution was analyzed in a statistical way. The influences of stress amplitude and grain orientation on fatigue deformation mechanisms were discussed and the non-uniform deformation among grains and the PSMs, within twinning were described quantitatively. - Highlights: • Fatigue morphology evolution was studied by Laser Scanning Confocal Microscopy. • 3D morphology of persistent slip markings and twins was characterized. • Non-uniform deformation among grains, the PSMs and twins were quantified. • Initiations of fatigue crack were clearly investigated.

36 MATERIALS SCIENCE↗

Crystallization and morphology of mordenite zeolite influenced by various parameters in organic-free synthesis

Research highlights: {yields} Seed, gel composition and silicon source affect the crystallization process of MOR. {yields} Seed, gel composition and silicon source influence the morphology of MOR. {yields} Low silica concentration results in MOR with high c/b aspect ratio. {yields} Novel nano fiber-like MOR with c/b aspect ratio of 89 was organic-free synthesized. {yields} The morphology of MOR influences its mesopore property and thermal stability. -- Abstract: A series of mordenite zeolites with different morphologies were synthesized via a facile organic-free hydrothermal route, and characterized by X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectrometer and N{sub 2} adsorption-desorption techniques. Influences of synthetic parameters, including seed crystal, silicon precursor, SiO{sub 2}/Al{sub 2}O{sub 3}, Na{sub 2}O/SiO{sub 2} and H{sub 2}O/SiO{sub 2}, on mordenite crystallization were investigated systematically. It was found that mordenite zeolites with various morphologies, such as fiber-like, rod-like, prism-like and needle-like ones could be synthesized in control. Especially, novel nano fiber-like MOR crystals with high c/b aspect ratio were prepared from low silica concentration system, which was manipulated by using small initial SiO{sub 2}/Al{sub 2}O{sub 3} ratio, large H{sub 2}O/SiO{sub 2} and silicon source with slow dissolution rate. Moreover, mordenite samples with various morphologies exhibited different mesopore property and thermal stability.

36 MATERIALS SCIENCE↗

The impact of K{sup +} content on the structural transformations and morphological changes during the thermal treatment of α-MnO{sub 2} nanorods

Highlights: ► The acidic treatment considerably shortened the α-MnO{sub 2} nanorods. ► α-MnO{sub 2} nanorods with higher potassium contents undergo to the structural changes at higher temperatures. ► Up to 500 °C no structural and morpholigcal changes are observed. -- Abstract: The effect of heat treatment on the structure and morphology of α-MnO{sub 2} nanorods with different potassium contents was investigated. These nanorods, prepared by ion exchange, were thermally treated at 500, 800, 1000 and 1100 °C, and characterized with X-ray diffraction and electron microscopy. The structure and morphology of the starting sample remained preserved up to 500 °C. The first structural and morphological changes were observed when α-MnO{sub 2} nanorods with different potassium contents were heated at 800 °C. The sample with the highest potassium content decomposed only partially to α-Mn{sub 2}O{sub 3}, while the decomposition of the α-MnO{sub 2} to α-Mn{sub 2}O{sub 3} was complete in the sample with the lowest potassium content. Morphologically, both samples were composed of nanorods and grains. When the temperature was increased to 1000 and 1100 °C, both the structure and morphology changed: the α-MnO{sub 2} nanorods completely decomposed to Mn{sub 3}O{sub 4} grains. The acidic media in which the ion exchange took place shortened the α-MnO{sub 2} nanorods.

36 MATERIALS SCIENCE↗

Analysis of growth kinetics and impact of NH{sub 3} on the morphology evolution of hexagonal-prism shaped Y{sub 4}O(OH){sub 9}NO{sub 3}/Y{sub 2}O{sub 3} single crystals

Highlights: • Tailored the morphology of Y{sub 4}O(OH){sub 9}NO{sub 3}and Y{sub 2}O{sub 3} crystals using different electrolytes by hydrothermal method. • Role of NH{sub 3} in the formation of hexagonal prism like morphology. • Time dependent experiments to study the growth process and formation of hexagonal prisms. - Abstract: The effect of NH{sub 3} on the morphology evolution of single crystalline hexagonal-prism like Y{sub 4}O(OH){sub 9}NO{sub 3} and Y{sub 2}O{sub 3} has been systematically investigated, as a function of reaction time, by using a combination of powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). Rational control over the morphology has been achieved by the choice of suitable electrolytes like NaNO{sub 3}, KNO{sub 3}, NH{sub 4}NO{sub 3}, KCl and NH{sub 4}Cl in the presence of NH{sub 4}OH. We report that the cross-sectional geometry of hydrothermally grown one-dimensional Y{sub 4}O(OH){sub 9}NO{sub 3} crystals can be tuned from spherical to hexagonal-prism like shape by introducing a particular reagent like NH{sub 4}NO{sub 3} in the presence of NH{sub 4}OH. An ‘oriented attachment’ mediated growth process takes place along with the ‘dissolution-recrystallization’ route which eventually resulted in the generation of the single crystals with hexagonal-prism like morphology.

36 MATERIALS SCIENCE↗