SEARCH · Engineering Papers

Results for “met”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Development of a computer-aided procedure for the national program of inspection of dams

An effort was undertaken to determine the utility of ERTS-1 MSS data, together with automatic data processing (ADP) techniques, to detect and locate surface water, and transfer the related technology to the Texas Water Rights Commission (TWRC). A test site was selected, ERTS-1 MSS and ancillary data obtained, and existent ADP classification programs applied. During the course of this effort a linear discriminant function was developed. The results were evaluated for potential candidates for a transferable procedure. A computer-aided technique using a linear discriminant function was selected and recommended, for inclusion in an operational system, which met detection and location criteria. Specifically, evaluation of the selected computer-aided procedure for the test site resulted in the detection of 100 percent of areas of surface water 10 acres or greater in areal extent and the geographic location of areas classified as water to a positional accuracy of 1000 feet or closer. The procedure was recommended for inclusion in an operational computer-aided procedure for transfer to TWRC.

Source record↗

NASA NTRS1974

Robust design of dynamic observers

The two (identity) observer realizations z = Mz + Ky and z = transpose of Az + transpose of K(y - transpose of Cz), respectively called the open loop and closed loop realizations, for the linear system x = Ax, y = Cx are analyzed with respect to the requirement of robustness; i.e., the requirement that the observer continue to regulate the error x - z satisfactorily despite small variations in the observer parameters from the projected design values. The results show that the open loop realization is never robust, that robustness requires a closed loop implementation, and that the closed loop realization is robust with respect to small perturbations in the gains transpose of K if and only if the observer can be built to contain an exact replica of the unstable and underdamped dynamics of the system being observed. These results clarify the stringent accuracy requirements on both models and hardware that must be met before an observer can be considered for use in a control system.

Bhattacharyya, S. P.↗

NASA NTRS1974

Deployable reflector design for Ku-band operation

A project was conducted to extend the deployable antenna technology state-of-the art through the design, analysis, construction, and testing of a lightweight, high surface tolerance, 12.5 foot diameter reflector for Ku-band operation. The applicability of the reflector design to the Tracking and Data Relay Satellite (TDRS) program was one requirement to be met. A documentary of the total program is presented. The performance requirements used to guide and constrain the design are discussed. The radio frequency, structural/dynamic, and thermal performance results are reported. Appendices are used to provide test data and detailed fabrication drawings of the reflector.

Tankersley, B. C.↗

NASA NTRS1974

Space processing applications payload equipment study. Volume 2E: Commercial equipment utility

Examination of commercial equipment technologies revealed that the functional performance requirements of space processing equipment could generally be met by state-of-the-art design practices. Thus, an apparatus could be evolved from a standard item or derived by custom design using present technologies. About 15 percent of the equipment needed has no analogous commercial base of derivation and requires special development. This equipment is involved primarily with contactless heating and position control. The derivation of payloads using commercial equipment sources provides a broad and potentially cost-effective base upon which to draw. The derivation of payload equipment from commercial technologies poses other issues beyond that of the identifiable functional performance, but preliminary results on testing of selected equipment testing appear quite favorable. During this phase of the SPA study, several aspects of commercial equipment utility were assessed and considered. These included safety, packaging and structural, power conditioning (electrical/electronic), thermal and materials of construction.

Smith, A. G.↗

NASA NTRS1973

Shuttle active thermal control system development testing. Volume 3: Modular radiator system test data correlation with thermal model

Results are presented of an analysis which compares the performance predictions of a thermal model of a multi-panel modular radiator system with thermal vacuum test data. Comparisons between measured and predicted individual panel outlet temperatures and pressure drops and system outlet temperatures have been made over the full range of heat loads, environments and plumbing arrangements expected for the shuttle radiators. Both two sided and one sided radiation have been included. The model predictions show excellent agreement with the test data for the maximum design conditions of high load and hot environment. Predictions under minimum design conditions of low load-cold environments indicate good agreement with the measured data, but evaluation of low load predictions should consider the possibility of parallel flow instabilities due to main system freezing. Performance predictions under intermediate conditions in which the majority of the flow is not in either the main or prime system are adequate although model improvements in this area may be desired. The primary modeling objective of providing an analytical technique for performance predictions of a multi-panel radiator system under the design conditions has been met.

Phillips, M. A.↗

NASA NTRS1974

Statistical summary of air quality data for metropolitian Cleveland, Ohio, 1967 - 1972: Total suspended particulates, nitrogen dioxide, and sulfur dioxide

Air-quality data for metropolitan Cleveland, Ohio, from 1967 through 1972 were collated and statistically analyzed. Total suspended particulates (TSP) departed from lognormal distribution in 1972. Nitrogen dioxide and sulfur dioxide, departed significantly from lognormal distributions in 1972. In Cleveland the Ohio standards were not met. However, the data indicate a general improvement in air quality. Unusually high precipitation (43% above the average in 1972) may be responsible in lowering these values from the 1971 levels. The mean values of TSP, NO2, and SO2 are 104, 191, and 83 microgram/cu m respectively.

King, R. B.↗

NASA NTRS1973

Space Shuttle Orbiter engine main combustion chamber cooling and life

A reusable life requirement of 100 missions is met by controlling the combustion chamber hot-gas wall temperature and strain levels. Maximum life, maximum performance, and minimum engine weight are attained through a descriptive parametric assessment of the regenerative cooling circuit, combustor length, contraction area ratio, and coolant passage geometry. Life is categorized by low-cycle fatigue and creep-stress rupture. Relationships are developed to determine the impact of heat transfer rate, thermal strain level, and geometric influence parameters on life. It is empirically shown that a throat heat flux of 100 Btu/sq in./sec can be accommodated.

Cook, R. T.↗

NASA NTRS1974

Testing of models of VVH particle sources and propagation

For comparisons between theoretical and observed charge spectra of VVH particles to be meaningful, at least two conditions must be met. First, charge resolution must be adequate to separate important groups of nuclei, and there should be no significant systematic errors in the charge scale developed. Second, there must be adequate rejection of slower particles of smaller Z, which have been observed in several flights. Within these conditions, it has been shown that observed features of the charge spectrum are not accidents of the analysis but reflect real variations in the relative abundances that must be explained by any successful model.

Blanford, G. E., Jr.↗

NASA NTRS1974

Use of channel electron multipliers as secondary standard detectors at EUV wavelengths

The procedures available for photometric calibration at extreme ultraviolet (EUV) wavelengths are outlined and the requirements for a secondary standard EUV photomultiplier defined. The performance of a number of commercially available channel electron multipliers over the 304-1350-A wavelength range is described, and their suitability for use as secondary standards is discussed in detail. Although none of the multipliers evaluated fully met the requirements for a secondary standard, it proved possible to calibrate absolutely a Mullard cone channel over the required wavelength range to an accuracy of plus or minus 9% and to employ it as a secondary standard in the calibration of a series of sounding rocket spectrometers.

Timothy, J. G.↗

NASA NTRS1974

Thermal design and analyses of Skylab multipurpose furnace and experiments

The Skylab multipurpose electric furnace was designed to accommodate eleven different materials processing experiments with their respective thermal requirements and constraints. Extensive prototype and ground-based tests were carried out and detailed thermal analyses were performed to ensure that these requirements and constraints are met. The basic features of the multipurpose electric furnace and the eleven experimental cartridges are outlined. The design and development problems encountered and the solutions to these problems are discussed. The analytical techniques used for thermal design and analyses are described.

Chi, J. W. H.↗

NASA NTRS1974

LST and instrument considerations

In order that the LST meet its scientific objectives and also be a National Astronomical Space Facility during the 1980's and 1990's, broad requirements have been levied by the scientific community. These scientific requirements can be directly translated into design requirements and specifications for the scientific instruments. The instrument ensemble design must be consistent with a 15-year operational lifetime. Downtime for major repair/refurbishment or instrument updating must be minimized. The overall efficiency and performance of the instruments should be maximized. Modularization of instruments and instrument subsystems, some degree of on-orbit servicing (both repair and replacement), on-axis location, minimizing the number of reflections within instruments, minimizing polarization effects, and simultaneous operation of the F/24 camera with other instruments, are just a few of the design guidelines and specifications which can and will be met in order that these broader scientific requirements be satisfied.-

Levin, G. M.↗

NASA NTRS1974

Orbit determination strategy and results for the Pioneer 10 Jupiter mission

Pioneer 10 is the first earth-based vehicle to encounter Jupiter and occult its moon, Io. In contributing to the success of the mission, the Orbit Determination Group evaluated the effects of the dominant error sources on the spacecraft's computed orbit and devised an encounter strategy minimizing the effects of these error sources. The encounter results indicated that: (1) errors in the satellite model played a very important role in the accuracy of the computed orbit, (2) encounter strategy was sound, (3) all mission objectives were met, and (4) Jupiter-Saturn mission for Pioneer 11 is within the navigation capability.

Wong, S. K.↗

NASA NTRS1974

Lower atmosphere composition and temperature experiment

Description of an optical design evolved as a result of such a unique set of experiment requirements as: high spatial and spectral resolution, the need to scan object space in both elevation and azimuth, and tight size and weight limitations dictated by typical spacecraft constraints. All of these requirements are shown to have been met in an optical system that has been built, tested, and flown under extremely tight schedule and cost constraints.

Williamson, W. R.↗

NASA NTRS1974

MSFC Skylab corollary experiment systems mission evaluation

Evaluations are presented of the performances of corollary experiment hardware developed by the George C. Marshall Space Flight Center and operated during the three manned Skylab missions. Also presented are assessments of the functional adequacy of the experiment hardware and its supporting systems, and indications are given as to the degrees by which experiment constraints and interfaces were met. It is shown that most of the corollary experiment hardware performed satisfactorily and within design specifications.

Source record↗

NASA NTRS1974

Water survey of Canada: Application for use of ERTS-A for retransmission of water resources data

The author has identified the following significant results. Water resources data including water level, water velocity, precipitation, air temperature, ice condition, DCP battery voltage, and water stage recorder clock operation have been transmitted from remote areas in Canada using the ERTS Data Collection System. The Data Collection Platforms have met all requirements. The suitability of satellite retransmission as a means of obtaining data from remote areas has been demonstrated. The present network of 9 Data Collection Platforms will be expanded to 28 to develop a quasi-operational network.

Halliday, R. A.↗

NASA NTRS1974

The cost of noise reduction in commercial tilt rotor aircraft

The relationship between direct operating cost (DOC) and departure noise annoyance was developed for commercial tilt rotor aircraft. This was accomplished by generating a series of tilt rotor aircraft designs to meet various noise goals at minimum DOC. These vehicles were spaced across the spectrum of possible noise levels from completely unconstrained to the quietest vehicle that could be designed within the study ground rules. A group of optimization parameters were varied to find the minimum DOC while other inputs were held constant and some external constraints were met. This basic variation was then extended to different aircraft sizes and technology time frames. It was concluded that reducing noise annoyance by designing for lower rotor tip speeds is a very promising avenue for future research and development. It appears that the cost of halving the annoyance compared to an unconstrained design is insignificant and the cost of halving the annoyance again is small.

Faulkner, H. B.↗

NASA NTRS1975

Water survey of Canada: Application for use of ERTS-A for retransmission of water resources data

The author has identified the following significant results. Water resources data including water level, water velocity, precipitation, air temperature, ice-out indicator, data collection platform battery check and water stage recorder clock operation have been transmitted from remote areas in Canada using the ERTS Data Collection System. The system has met all requirements. The suitability of satellite retransmission has been demonstrated. The present network will be expanded to 28 in 1975.

Halliday, R. A.↗

NASA NTRS1975

USDI DCS technical support: Mississippi Test Facility

The objective of the technical support effort is to provide hardware and data processing support to DCS users so that application of the system may be simply and effectively implemented. Technical support at Mississippi Test Facility (MTF) is concerned primarily with on-site hardware. The first objective of the DCP hardware support was to assure that standard measuring apparatus and techniques used by the USGS could be adapted to the DCS. The second objective was to try to standardize the miscellaneous variety of parameters into a standard instrument set. The third objective was to provide the necessary accessories to simplify the use and complement the capabilities of the DCP. The standard USGS sites have been interfaced and are presently operating. These sites are stream gauge, ground water level and line operated quality of water. Evapotranspiration, meteorological and battery operated quality of water sites are planned for near future DCP operation. Three accessories which are under test or development are the Chu antenna, solar power supply and add-on memory. The DCP has proven to be relatively easy to interface with many monitors. The large antenna is awkward to install and transport. The DCS has met the original requirements well; it has and is proving that an operation, satellite-based data collection system is feasible.

Preble, D. M.↗