Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Digital and Gradient Refractive Index Planar Optics by Nanoimprinting Mesoporous Silicon

We report the realization of digital and gradient index flat-optics and planar waveguides using the ‘nanoimprinting refractive index’ (NIRI) technique applied to mesoporous silicon. This technique combines the distinct optical and mechanical metamaterial qualities of mesoporous silicon, including its widely tunable effective refractive index and ability to undergo plastic deformation with a near zero Poisson ratio. Nanoimprinting with premastered and reusable stamps containing analog or digital features enables the continuous or discontinuous patterning of refractive index with high contrast Δn ≥ 0.8 and subwavelength resolution. Using NIRI we experimentally demonstrate a wavefront shaping flat microlens array operating in the visible (405–635 nm) and mesoporous silicon and silica waveguides operating near 1310 nm. This study demonstrates the viability of patterning arbitrary refractive index distributions, n(x,y), on the surface of a chip while circumventing the challenges and limitations of top-down lithographic techniques – thus opening a low-cost and scalable approach for the realization of advanced planar optical technologies.

36 MATERIALS SCIENCE↗

Sub‐5 nm Intermetallic Nanoparticles Confined in Mesoporous Silica Wells for Selective Hydrogenation of Acetylene to Ethylene

Abstract We report the synthesis and catalytic application of intermetallic PtSn nanoparticles confined in MSWs (Mesoporous Silica Wells) in the semi‐hydrogenation of acetylene. Platinum nanoparticles with a size of 2.9 nm supported on amine‐functionalized ∼180 nm silica spheres were enmeshed in a mesoporous silica shell. After the addition of tin via a polyol synthesis method, we obtained the final PtSn x @MSW (x=0.30, 0.50, 0.70, 1.0 and 2.0). Owing to the mesoporous encapsulation the sub‐5 nm bimetallic particles are shown to be monodisperse and well protected against aggregation on the silica sphere even under high‐temperature treatment conditions. In the gas phase semi‐hydrogenation of acetylene, the PtSn@MSW with Sn/Pt molar ratios equal to or greater than one displayed higher selectivity to ethylene. Meanwhile, increasing Sn content decreases acetylene conversion. The intermetallic PtSn@MSW catalysts also displayed long‐term stability and regenerability due to the confined environment provided by MSW.

Maligal‐Ganesh, Raghu V.↗

Ultrasmall Cu Nanoparticles Supported on Crystalline, Mesoporous ZnO for Selective CO 2 Hydrogenation

Converting CO 2 to value-added chemicals, e. g., CH 3 OH, is highly desirable in terms of the carbon cycling while reducing CO 2 emission from fossil fuel combustion. Cu-based nanocatalysts are among the most efficient for selective CO 2 -to-CH 3 OH transformation; this conversion, however, suffers from low reactivity especially in the thermodynamically favored low temperature range. We herein report ultrasmall copper (Cu) nanocatalysts supported on crystalline, mesoporous zinc oxide nanoplate (Cu@mZnO) with notable activity and selectivity of CO 2 -to-CH 3 OH in the low temperature range of 200–250 °C. Cu@mZnO nanoplates are prepared based on the crystal-crystal transition of mixed Cu and Zn basic carbonates to mesoporous metal oxides and subsequent hydrogen reduction. Under the nanoconfinement of mesopores in crystalline ZnO frameworks, ultrasmall Cu nanoparticles with an average diameter of 2.5 nm are produced. Cu@mZnO catalysts have a peak CH 3 OH formation rate of 1.13 mol h −1 per 1 kg under ambient pressure at 246 °C, about 25 °C lower as compared to that of the benchmark catalyst of Cu−Zn−Al oxides. In conclusion, our new synthetic strategy sheds some valuable insights into the design of porous catalysts for the important conversion of CO 2 -to-CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Response of Mesoporous Silicon to Adsorbants with Nitro Groups

We demonstrate that the electronic structure of mesoporous silicon is affected by adsorption of nitrobased explosive molecules in a compound-selective manner. This selective response is demonstrated by probing the adsorption of two nitro-based molecular explosives (trinitrotoluene and cyclotrimethylenetrinitramine) and a nonexplosive nitro-based aromatic molecule (nitrotoluene) on mesoporous silicon using soft X-ray spectroscopy. The Si atoms strongly interact with adsorbed molecules to form Si-O and Si-N bonds, as evident from the large shifts in emission energy present in the Si L2,3 X-ray emission spectroscopy (XES) measurements. Furthermore, we find that the energy gap (band gap) of mesoporous silicon changes depending on the adsorbant, as estimated from the Si L2,3 XES and 2p X-ray absorption spectroscopy (XAS) measurements. Our ab initio molecular dynamics calculations of model compounds suggest that these changes are due to spontaneous breaking of the nitro groups upon contacting surface Si atoms. This compound-selective change in electronic structure may provide a powerful tool for the detection and identification of trace quantities of airborne explosive molecules.

Environmental Molecular Sciences Laboratory↗

Nanosized carriers for hydrophobic compounds based on mesoporous silica: synthesis and adsorption properties

MCM-41 type mesoporous silica particles were obtained using a template method in an alkaline medium and cetyltrimethylammonium bromide as a matrix. The structural and adsorption characteristics of the mesoporous material were studied by dynamic light scattering, scanning electron microscopy, low-temperature adsorption—desorption of nitrogen, IR spectroscopy, and simultaneous thermal analysis. It was shown that the obtained mesoporous material possesses high porosity with the specific pore volume in excess of 1 cm{sup 3} g{sup −1}. It was established that the size of silica particles does not exceed 200 nm, which is a value acceptable for the penetration of drugs through cell membranes. The optimal compositions of aqueous dispersions of MCM-41 with minimal sedimentation processes were determined. A drug (indomethacin) was encapsulated into the silica pores using the precipitation method at various temperatures (40 and 60 °C), the quantitative parameters of loading efficiency were calculated. The infl uence of temperature on the encapsulation ability was demonstrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of free-standing high quality mesoporous carbon membranes

Flat-sheet mesoporous carbon membranes with uniform pore size (e.g., 6.4 nm) and controllable thickness were prepared by pyrolysis of polymeric composite films, which were formed by self-assembly of phenolic resin and block copolymer under acidic conditions. Hexamethylenetetramine was selected as a solid cross-linker to control the rheology of polymeric carbon precursors so that the flat-sheet polymeric films could undergo carbonization without deformation, ensuring the preparation of mesoporous carbon membranes on a large scale with high quality. Gas transport properties through these mesoporous carbon membranes are also reported.

36 MATERIALS SCIENCE↗

Soft-Template-Synthesized Mesoporous Carbon for Oral Drug Delivery

Template-synthesized mesoporous carbons were successfully used in in vitro investigations of controlled delivery of three model drugs, captopril, furosemide, and ranitidine hydrochloride. Captopril and furosemide exhibited desorption kinetics over 30 40 h, and ranitidine HCl had a complete release time of 5 10 h. As evident from the slow release kinetics, we contend that our mesoporous carbon is an improved drug-delivery medium compared to state-of-the-art porous silica-based substrates. The mesoporous carbons, synthesized from phloroglucinol and lignin, a synthetic and a sustainable precursor, respectively, exhibit BET surface area of 200 400 m2 g-1 and pore volume of 0.2 0.6 cm3 g-1. The phloroglucinol-based carbon has narrower pore widths and higher pore volume than the lignin-derived counterpart and maintains a longer release time. Numerical modeling of the release kinetics data reveals that the diffusivities of all the drugs from lignin-based carbon media are of equivalent magnitude (10-22 to 10-24 m2 s-1). However, a tailored reduction of pore width in the sorbent reduces the diffusivity of smaller drug molecules (captopril) by an order of magnitude. Thus, engineered pore morphology in our synthesized carbon sorbent, along with its potential to tailor the chemistry of its interaction with sorbet, can be exploited for optimal delivery system of a preferred drug within its therapeutic level and below the level of toxicity.

Saha, Dipendu↗

Computationally guided synthesis of carbon coated mesoporous silica materials

Mesoporous silica materials (MSMs) are well-suited for biomedical applications due to their unique features, including a large surface area and tunable pore size. To enhance their durability, the small pores in MSMs are filled with carbon precursors and then carbonized to prevent them from interacting with unreacted silicic acid. Here, in this study, we synthesized and healed MSMs using a combination of non-reactive and reactive molecular dynamics (MD) simulations. The non-reactive MD simulation revealed that the self-assembly of Pluronic® L64 polymers in water resulted in nearly 80 % hydrogen bonds between the hydrophilic sections of the micelle and water. In the bond-boosted ReaxFF MD simulations, silicic acid precursors were condensed on the micelle surface, with over 60 % of them leading to the creation of periodic mesoporous silica within the system. Condensation of silicic acid precursors at 300 K with bond-boosting and at 1500 K without it both significantly promoted the polymerization of Si(OH) 4 , with the latter doubling the rate compared to the former. Subsequently, we healed the MSM surface by carbonizing carbon precursors inside an MSM pore. Polyethylene (PE) and high-rank lignite were identified as the most suitable precursors due to their ability to form turbostratic graphene structures. High-rank lignite exhibited the highest carbon conversion ratio to 6-membered rings, closely followed by PE, in the carbon ring formation analysis. Additionally, the production of gases, such as H 2 , increased significantly for PE at both 2200 K and 2600 K, indicating the conversion of a considerable portion of carbon into graphitic or turbostratic structures. The carbonization of PE primarily led to the formation of planar (sp 2 ) structures, while sucrose yielded the least planar structures. Finally, we studied the protective blocking of unreacted silicic acid precursor by considering a PET turbostratic graphene structure in a silica mesopore formed at 2600 K. The trajectory analysis showed that the surface of the silica was effectively coated with PET tar, preventing unreacted silicic acid from interacting with the inner silica pore surface. These findings offer valuable insights into the synthesis and carbonization-based healing processes of MSMs, enhancing their potential for various biomedical applications.

36 MATERIALS SCIENCE↗

Comparative study of bulk and nano-structured mesoporous SnO 2 electrodes on the electrochemical performances for next generation Li rechargeable batteries

For next generation Li-ion batteries, advanced electrode materials with high energy densities are mightily important issue. Since the partial oxidation of Sn with Li 2 O to form SnO x was demonstrated upon delithiation in SnO 2 anode, the additional conversion reaction has contributed that the theoretical capacity of SnO 2 can be extended from 783 to 1494 mAh g -1 . Herein, with the design of additional conversion reaction, we discuss key factors for high electrochemical performances of the SnO 2 anodes through comparative analysis between nano-structured mesoporous SnO 2 and conventional bulk SnO 2 , based on synchrotron radiation-based techniques, quantitative analysis of extended X-ray absorption fine structure spectra, and bond strength calculation. In this way, we demonstrate that the mesoporous SnO 2 has a nano-engineering structure, inducing the facilitated electrochemical reaction and the weak Sn-O bond strength that would have an advantage in the additional conversion reaction as well as a void structure, relieving the severe volume changes during lithiation/delithiation. Consequently, excellent electrochemical performance is obtained in the mesoporous SnO 2 . Furthermore, insight from this research enables important advance in the development of metal oxide-based anode materials by making irreversible reaction reversible, providing a realizable strategy for the design and creation of high-energy storage devices.

25 ENERGY STORAGE↗

Mechanistic insights into structural parameters maximizing energy storage density in Si mesoporous electrodes for Li-ion batteries

Mesoporous Si electrodes have an interesting set of structural parameters, which, when carefully optimized, can lead to ultrahigh energy density Si electrodes for Li-ion batteries. We present here in this paper details of a systematic research leading to the discovery of an “ideal” structure of mesoporous Si electrode, which results in exceptional cracking/damage resistance, while simultaneously having very high specific (>2000 mAh g-1) and total (>1.5 mAh cm-2) capacities for large number of cycles. The electrodes near the “ideal” value of the characteristic structural parameter (the ratio of Si wall thickness to pore diameter) are free from first-cycle capacity degradation, and are efficient in accommodating the volume changes during lithiation by uniformly filling up the porous space between Si walls. Interestingly, these electrodes are also found to be structurally damage-resistant, surviving through many lithiation-delithiation cycles. Using charge-discharge cycling and electron microscopy we show that ideal structure is the key for achieving ultrahigh energy storage density in Si mesoporous electrodes for Li-ion batteries.

25 ENERGY STORAGE↗

Synthesis, characterization, and near-infrared luminescent properties of the ternary thulium complex covalently bonded to mesoporous MCM-41

The crystal structure of a ternary Tm(DBM){sub 3}phen complex (DBM=dibenzoylmethane; phen=1, 10-phenanthroline) and the synthesis of hybrid mesoporous material in which the complex covalently bonded to mesoporous MCM-41 are reported. Crystal data: Tm(DBM){sub 3}phen C{sub 59}H{sub 47}N{sub 2}O{sub 7}Tm, monoclinic, P21/c, a=19.3216(12) A, b=10.6691(7) A, c=23.0165(15) A, {alpha}=90 deg., {beta}=91.6330(10) deg., {gamma}=90 deg., V=4742.8(5) A{sup 3}, Z=4. The properties of the Tm(DBM){sub 3}phen complex and the corresponding hybrid mesoporous material [Tm(DBM){sub 3}phen-MCM-41] have been studied. The results reveal that the Tm(DBM){sub 3}phen complex is successfully covalently bonded to MCM-41. Both Tm(DBM){sub 3}phen complex and Tm(DBM){sub 3}phen-MCM-41 display typical near-infrared (NIR) luminescence upon excitation at the maximum absorption of the ligands, which contributes to the efficient energy transfer from the ligands to the Tm{sup 3+} ion, an antenna effect. The full width at half maximum (FWHM) centered at 1474 nm in the emission spectrum of Tm(DBM){sub 3}phen-MCM-41 is 110 nm, which is the potential candidate of broadening amplification band from C band (1530-1560 nm) to S{sup +} band (1450-1480 nm) in optical area. - Graphical abstract: The crystal structure of Tm(DBM){sub 3}phen complex (DBM=dibenzoylmethane; phen=1, 10-phenanthroline). The complex is successfully covalently bonded to MCM-41 (Tm(DBM){sub 3}phen-MCM-41). After ligand-mediated excitation, the emission spectrum of Tm(DBM){sub 3}phen-MCM-41 shows the bands 802 and 1474 nm. The FWHM of the 1474-nm band for Tm(DBM){sub 3}phen-MCM-41 is 110 nm, such a broad spectrum enables a wide gain bandwidth for optical amplification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanism for the formation of tin oxide nanoparticles and nanowires inside the mesopores of SBA-15

The formation of polycrystalline tin oxide nanoparticles (NP) and nanowires was investigated using nanocasting approach included solid-liquid strategy for insertion of SnCl{sub 2} precursor and SBA-15 silica as a hard template. HR-TEM and XRD revealed that during the thermal treatment in air 5 nm tin oxide NP with well defined Cassiterite structure were formed inside the SBA-15 matrix mesopores at 250 deg. C. After air calcination at 700 deg. C the NP assembled inside the SBA-15 mesopores as polycrystalline nanorods with different orientation of atomic layers in jointed nanocrystals. It was found that the structure silanols of silica matrix play a vital role in creating the tin oxide NP at low temperature. The pure tin chloride heated in air at 250 deg. C did not react with oxygen to yield tin oxide. Tin oxide NP were also formed during the thermal treatment of the tin chloride loaded SBA-15 in helium atmosphere at 250 deg. C. Hence, it is well evident that silanols present in the silica matrix not only increase the wetting of tin chloride over the surface of SBA-15 favoring its penetration to the matrix pores, but also react with hydrated tin chloride according to the proposed scheme to give tin oxide inside the mesopores. It was confirmed by XRD, N{sub 2}-adsorption, TGA-DSC and FTIR spectra. This phenomenon was further corroborated by detecting the inhibition of SnO{sub 2} NP formation at 250 deg. C after inserting the tin precursor to SBA-15 with reduced silanols concentration partially grafted with tin chloride. - Graphical abstract: The mechanism of formation of polycrystalline tin oxide nanoparticles (NP) and nanowires was investigated using nanocasting approach included solid-liquid strategy for insertion of SnCl{sub 2} precursor and SBA-15 silica as a hard template. It was found that the structure silanols of silica matrix play a vital role in creating the tin oxide NP during thermal treatment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Drug delivery from hydrophobic-modified mesoporous silicas: Control via modification level and site-selective modification

Dimethylsilyl (DMS) modified mesoporous silicas were successfully prepared via co-condensation and post-grafting modification methods. The post-grafting modification was carried out by the reaction of the as-synthesized MCM-41 material (before CTAB removal) with diethoxydimethylsinale (DEDMS). N{sub 2} adsorption-desorption and {sup 29}Si MAS NMR characterization demonstrated that different amount of DMS groups were successfully incorporated into the co-condensation modified samples, and the functional DMS groups were placed selectively on the pore openings and external pore surfaces in the post-grafting modified samples. Subsequently, the controlled drug delivery properties from the resulting DMS-modified mesoporous silicas were investigated in detail. The drug adsorption experiments showed that the adsorption capacities were mainly depended on the content of silanol group (CSG) in the corresponding carriers. The in vitro tests exhibited that the incorporation of DMS groups greatly retarded the ibuprofen release rate. Moreover, the ibuprofen release profiles could be well modulated by varying DMS modification levels and site-selective distribution of functional groups in mesoporous carriers. - The distribution of DMS groups on the pore surfaces of the mesostructures strongly affects the drug release rate. The P-M41-1 and the P-M41-2 possess the close DMS modification levels as the C-M41-10, but the ibuprofen release rates from the P-M41-1 and P-M41-2 are much slower than that from the C-M41-10.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and photocatalytic activity of co-doped mesoporous TiO{sub 2} on Brij98/CTAB composite surfactant template

Using composite surfactant templates, polyoxyethylene (20) oleyl ether (Brij98) and cetyl trimethyl ammonium bromide (CTAB), as structure-directing agents, N and La co-doped mesoporous TiO{sub 2} complex photocatalysts were synthesized successfully. The micromorphology of co-doped mesoporous TiO{sub 2} samples was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FT-IR), energy-dispersive X-ray spectrometer (EDS) and N{sub 2} adsorption-desorption measurements. The results indicated that the complex photocatalyst prepared with a molar ratio of Brij98:CTAB=1:1 showed a uniform pore size of ca. 7 nm and a high specific surface area (S{sub BET}) of 279.0 m{sup 2} g{sup -1}, and exhibited the highest photocatalytic activity for degradation of papermaking wastewater under ultra-violet light irradiation. The chemical oxygen demand (CODc{sub r}) percent degradation was about 73% in 12 h and chroma percent degradation was 100% in 8 h. - Graphical abstract: CODc{sub r} percent degradation of papermaking wastewater is about 73% after 12 h over the co-doped mesoporous TiO{sub 2} prepared with a molar ratio of Brij98:CTAB=1:1.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chemical synthesis of mesoporous CuO from a single precursor: Structural, optical and electrical properties

We report a simple method for growing photoluminescent mesoporous CuO nanoparticles by a chemical route, using the single precursor technique. The final products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), N{sub 2} adsorption-desorption isotherm, UV-vis absorption spectroscopy, photoluminescence (PL) spectroscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Hall measurements. Structural analysis reveals that the average pore diameter of the as-prepared CuO is about 38.8 A and it comes with an average surface area of 66.63 m{sup 2}/g. N{sub 2}-sorption analysis shows that the resulting isotherm as type IV; which is the characteristic of mesoporous materials. The average crystal diameter, as derived from the XRD data analysis is found to be about 20 nm. FESEM measurement reveals that the material is composed of cubic nanoparticles. The UV-vis spectrum of the material shows significant amount of blue-shift in the band gap energy (E{sub g}), due to the quantum confinement effect exerted by the nanocrystals. The Raman study of the CuO nanostructures also indicates the high crystalline nature of the material. From the positive sign of Hall coefficient, the p-type conduction nature of the deposited film is established. The film was found to show high magnetoresistance, which is in the order of 10{sup 5} {Omega}. - Graphical abstract: FESEM image of the mesoporous CuO prepared from Cu(OOCPh){sub 2}Lut{sub 2} complex.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The electrochemical performance of ordered mesoporous carbon/nickel compounds composite material for supercapacitor

A series of high performance ordered mesoporous carbon/nickel compounds composites have been synthesized by a combination of incipient wetness impregnation and hydrothermal method for the first time. X-ray diffraction (XRD), N{sub 2} adsorption/desorption isotherms and transmission electron microscopy (TEM) are used to characterize the composites derived at the hydrothermal temperature of 125, 150, 175, 200, 250, 275 and 300 {sup o}C. The formation of nanosized nickel compounds, fully inside the mesopore system, was confirmed with XRD and TEM. An N{sub 2} adsorption/desorption isotherms measurements still revealed mesoporosity for the host/guest compounds. It is noteworthy that an OMC/nickel nitrate hydroxide hydrate composite (OMCN-150) exhibits more excellent performance. Based on the various hydrothermal temperatures of the composite, the capacitance of an OMCN-150 delivering the best electrochemical performance is about 2.4 (5 mV s{sup -1}) and 1.5 (50 mV s{sup -1}) times of the pristine OMC. The capacitance retention of an OMCN-150 is 96.1%, which indicates that the electrochemical performance of the supercapacitor is improved greatly, and represents novel research and significant advances in the field of electrode composite materials for supercapacitor. -- Graphical abstract: A series of high performance nickel compound/ordered mesoporous carbon composites were synthesized by a combination of incipient wetness impregnation and hydrothermal method for the first time. Display Omitted

36 MATERIALS SCIENCE↗

Periodic mesoporous organosilicas with co-existence of diurea and sulfanilamide as an effective drug delivery carrier

In this article we report the synthesis of new periodic mesoporous organosilicas (PMOs) with the co-existence of diurea and sulfanilamide-bridged organosilica that are potentially useful for controlled drug release system. The materials possess hexagonal pores with a high degree of uniformity and show long-range order as confirmed by the measurements of small-angle X-ray scattering (SAXS), N{sub 2} adsorption isotherms, and transmission electron microscopy(TEM). FT-IR and solid state {sup 29}Si MAS and {sup 13}C CP MAS NMR spectroscopic analyses proved that the bridging groups in the framework are not cleaved and covalently attached in the walls of the PMOs. It was found that the organic functionality could be introduced in a maximum of 10 mol% with respect to the total silicon content and be thermally stable up to 230 {sup o}C. The synthesized materials were shown to be particularly suitable for adsorption and desorption of hydrophilic/hydrophobic drugs from a phosphate buffer solution at pH 7.4. -- Graphical Abstract: We report the synthesis of new periodic mesoporous organosilicas (PMOs) with the co-existence of diurea and sulfanilamide-bridged organosilica that are potentially useful for controlled drug release system. Display Omitted Highlights: {yields} Synthesis of new periodic mesoporous organosilicas (PMOs) with the co-existence of diurea and sulfanilamide-bridged organosilica that are potentially useful for controlled drug release system. {yields} The organic functionality could be introduced in a maximum of 10 mol% with respect to the total silicon content and be thermally stable up to 230 {sup o}C. {yields} The synthesized materials were shown to be particularly suitable for adsorption and desorption of hydrophilic/hydrophobic drugs from a phosphate buffer solution at pH 7.4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stepwise synthesis, characterization, and electrochemical properties of ordered mesoporous carbons containing well-dispersed Pt nanoparticles using a functionalized template route

A stepwise method is described for the accurately controlled growth of Pt nanoparticles supported on ordered mesoporous carbons (Pt-OMC) by the nanocasting of carbon and metal precursors in the pore channels of mesoporous silicas functionalized with Si-H groups. Results obtained from N{sub 2} adsorption/desorption isotherms and transmission electron microscopy showed well-dispersed Pt nanoparticles (2-3 nm) on Pt-OMC with high surface area (837 m{sup 2} g{sup -1}) and regular pore channels (2.9 nm), which facilitate reactant/product diffusion. X-ray diffraction and X-ray photoelectron spectroscopy indicated that Pt nanoparticles in the Pt-OMC sample were mostly present in the metallic form of a face-centered cubic (fcc) crystalline structure. The Pt-OMC catalyst was found to have superior electrocatalytic properties during oxygen reduction reaction as compared to typical commercial electrocatalysts. - Graphical abstract: A novel procedure has been developed to synthesize ordered carbon mesoporous carbons (OMC) containing well-dispersed and highly electrocatalytic Pt nanoparticles (Pt-OMC) for oxygen reduction reaction. Highlights: > A novel method to incorporate nanosized Pt particles on nanostructure carbons. > Functionalized silica templates were used to control size and distribution of Pt nanoparticles. > Electrochemical measurements of oxygen reduction demonstrated high catalytic activity compared to common commercial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗