Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Quantitative determination of zero-gravity effects on electronic materials processing germanium crystal growth with simultaneous interface demarcation experiment MA-060, section 5

The crystal growth and segregation characteristics of a melt in a directional solidification configuration under near zero g conditions were investigated. The germanium (doped with gallium) system was selected because it was extensively studied on Earth and because it lends itself to a very detailed macroscopic and microscopic characterization. An extensive study was performed of the germanium crystals grown during the Apollo-Soyuz Test Project mission. It was found that single crystal growth was achieved and that the interface demarcation functioned successfully. On the basis of the results obtained to date, there is no indication that convection driven by thermal or surface tension gradients was present in the melt. The gallium segregation, in the absence of gravity, was found to be fundamentally different in its initial and its subsequent stages from that of the ground based tests. None of the existing theoretical models for growth and segregation can account for the observed segregation behavior in the absence of gravity.

Gatos, H. C.↗

Materials processing in Space/Spacelab. FES/VCGS payload critical design review

A 25 mW He-Ne laser holographic recorder for recording the solution growth of triglycine sulfate crystals under low-zero gravity conditions is described. A systems engineering and design analysis, and mechanical and electrical design analyses of the equipmentation are presented. The equipment, fabricated for the Sl-3 flight on the space shuttle, was designed to take 300 holograms (two orthogonal views) on 50-235 film of each growth experiment. Specifications and capabilities for support module mechanical assemblies are lso presented.

Source record↗

Materials processing in space bibliography

Literature dealing with flight experiments utilizing a low gravity environment to elucidate and control various processes or with ground based activities that provide supporting research is listed. Included are Government reports, contractor reports, conference proceedings, and journal articles. Subdivisions of the bibliography include the five categories: crystal growth; metals, alloys, and composites, fluids and transport; glasses and ceramics; and Ultrahigh Vacuum and Containerless Processing Technologies, in addition to a list of patents and a compilation of anonymously authored collections and reports and a cross reference index.

Pentecost, E.↗

Adaptive materials processing

New sensors for both arc welding and resistance spot welding processes were studied. For arc welding, the arc itself is used as the sensor. Minor changes in both composition and geometry of the plasma result in fluctuations in the arc voltage. While the process as currently employed is an off-line system, development of an on-line process controller would be possible once the optimum analysis technique is developed. It has been shown that for resistance spot welding, the dynamic resistance of the weld joint can be correlated to growth of the fusion zone. It is indicated that this technique is not as useful for projection welds as for spot welds.

Eager, T. W.↗

Materials processing in space bibliography, 1983, revised

Flight experiments utilizing a low gravity environment to elucidate and control various processes, or ground based activities that provide supporting research are compiled. Six major categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; glasses and ceramics; ultrahigh vacuum and containerless processing technologies; and combustion are included. A list of patents and appendices providing a compilation of anonymously authored collections and reports and a cross reference index are included.

Pentecost, E.↗

Materials processing in space program tasks

Crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; and ultrahigh vacuum and containerless technologies are discussed.

Pentecost, E.↗

Materials processing in space program tasks-supplement

An overview of the program scope for managers and scientists in industry, university, and government communities is provided. An introductory description of the program, its history, strategy, and overall goals; identification of the organizational structures and people involved; and a description of each research task, together with a list of recent publications are included. The tasks are grouped into six categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; and ultrahigh vacuum and containerless processing technologies; combustion experiments; and experimental technology.

Pentecost, E.↗

Potential means of support for materials processing in space. A history of government support for new technology

Development of a given technology for national defense and large systems developments when the task is too large or risky for entrepreneurs, yet is clearly in the best interest of the nation are discussed. Advanced research to identify areas of interest was completed. Examples of commercial opportunities are the McDonnell-Douglas Corporation purification process for pharmaceutical products and the Microgravity Research Associates process for growing gallium arsenide crystals in space.

Mckannan, E. C.↗

Scientific results from the materials processing in space program

Scientific experiments conducted in a low-gravity environment make it possible to study effects, such as surface tension-driven flows, which are often masked by buoyancy-driven flows. A summary is provided of several early experiments which demonstrate that unwanted convective flows can be effectively suppressed in experiments conducted in orbiting spacecraft. Possible applications of low-G processing are discussed, taking into account Bridgman growth of solid solution alloy-type semiconductors, Bridgman growth of eutectic systems, and float-zone crystal growth. The control of macrosegregation and phase separation in castings is considered, giving attention also to containerless melting and solidification. A description of experiment facilities and opportunities is provided.

Naumann, R.↗

The growth of materials processing in space - A history of government support for new technology

Development of a given technology for national defense and large systems developments when the task is too large or risky for entrepreneurs, yet is clearly in the best interest of the nation are discussed. Advanced research to identify areas of interest was completed. Examples of commercial opportunities are the McDonnell-Douglas Corporation purification process for pharmaceutical products and the Microgravity Research Associates process for growing gallium arsenide crystals in space.

Mckannan, E. C.↗

Task description for the 1983 catalog of tasks for the materials processing in space program

Ground based research necessary to establish all of the optimum experimental conditions required to accomplish the best possible electrophoretic separation of human kidney cell fractions which produce urokinase, gravulocyte stimulating factor, or erythropoietin was carried out. This overall effort includes: (1) development of optimum buffer systems, (2) viability tests, (3) ground based research on electrophoretic mobilities, (4) development of standard cells, standard cell culture methods, and standard urokinase assay procedures, (5) acquisition of the ground control data to be compared with results using cells returned from the electrophoretic separations carried out in microgravity, and (6) ground based research on the electrophoretic mobilities of suspended pituitary cells.

Pentecost, E.↗

Materials processing in space - Review of the early experiments

Basic research performed to study various aspects of fluid behavior in a microgravity environment during the first two decades of spaceflight is described. The uniqueness of space was recognized in the 1950s as a place where buoyancy-driven convective flows and sedimentation would effectively be absent. The conditions were favorable for experiments in crystal growth, alloy solidification, combustion, thermocapillary flows, electroosmotic flows, Stefan flows, Soret diffusion, and solidification processes. Pre-Skylab NASA drop tower experiments and Apollo 14 and 17 experiments made in preparation for Skylab are described. Skylab welding and brazing, crystal growth, metallurgy and liquid float zone trials and Apollo-Soyuz crystal growth, electrophoresis and metallurgical experiments are summarized. SPAR rocket trials along similar lines are also outlined.

Naumann, Robert J.↗

Multicolor pyrometer for materials processing in space

The program goals are to design, construct, and program a prototype imaging pyrometer capable of measuring the temperature distribution across the surface of a moving object suspended in space. The approach is to utilize an optical system which operates at short wavelengths compared to the peak of the blackbody spectrum for the temperature range of interest, thus minimizing errors associated with a lack of knowledge about heated sample emissivity. An analysis of the system's temperature measurement capability based on the camera's responsivity was performed and bound to be satisfactory. Details for the evolving optical design and the progress towards construction of a working model are discussed. Details of the algorithm developed for selecting the optimum colors to be used by the pyrometer are reported. Though final selection of the colors will have to await a final design of the optical system, results using a preliminary optical design are presented.

Frish, Michael↗

Mass transfer across combustion gas thermal boundary layers - Power production and materials processing implications

The effects of Soret diffusion (for vapors) and thermophoresis (for particles) are illustrated using recent optical experiments and boundary layer computations. Mass transfer rate augmentations of up to a factor of 1000 were observed and predicted for submicron-particle capture by cooled solid surfaces, while mass transfer suppressions of more than 10 to the -10th-fold were predicted for 'overheated' surfaces. It is noted that the results obtained are of interest in connection with such technological applications as fly-ash capture in power generation equipment and glass droplet deposition in optical-waveguide manufacture.

Rosner, D. E.↗

Development of a shuttle recovery Commercial Materials Processing in Space (CMPS) program

The work performed has covered the following tasks: update commercial users requirements; assess availability of carriers and facilities; shuttle availability assessment; development of optimum accommodations plan; and payload documentation requirements assessment. The results from the first four tasks are presented. To update commercial user requirements, contacts were made with the JEA and CCDS partners to obtain copies of their most recent official flight requests. From these requests the commercial partners' short and long range plans for flight dates, flight frequency, experiment hardware and carriers was determined. A 34 by 44 inch chart was completed to give a snapshot view of the progress of commercialization in space. Further, an assessment was made of the availability of carriers and facilities. Both existing carriers and those under development were identified for use by the commercial partners. A data base was compiled to show the capabilities of the carriers. A shuttle availability assessment was performed using the primary and secondary shuttle manifests released by NASA. Analysis of the manifest produced a flight-by-flight list of flight opportunities available to commercial users. Using inputs from the first three tasks, an Optimum Accommodations Plan was developed. The Accommodation Plan shows the commercial users manifested by flight, the experiment flown, the carrier used and complete list of commercial users that could not be manifested in each calendar year.

Source record↗

Desirable limits of accelerative forces in a space-based materials processing facility

There are three categories of accelerations to be encountered on orbiting spacecraft: (1) quasi-steady accelerations, caused by atmospheric drag or by gravity gradients, 10(exp -6) to 10(exp -7) g sub o; (2) transient accelerations, caused by movements of the astronauts, mass translocations, landing and departure of other spacecraft, etc.; and (3) oscillary accelerations, caused by running machinery (fans, pumps, generators). Steady accelerations cause continuing displacements; transients cause time-limited displacements. The important aspect is the area under the acceleration curve, measured over a certain time interval. Note that this quantity is not equivalent to a velocity because of friction effects. Transient motions are probably less important than steady accelerations because they only produce constant displacements. If the accelerative forces were not equal and opposite, the displacement would increase with time. A steady acceleration will produce an increasing velocity of a particle, but eventually an equilibrium value will be reached where drag and acceleration forces are equal. From then on, the velocity will remain constant, and the displacement will increase linearly with time.

Naumann, Robert J.↗