Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Study of Cathode Gas Diffusion Architecture for Improved Oxygen Transport in Hydroxide Exchange Membrane Fuel Cells

The high pH environment in hydroxide exchange membrane fuel cells (HEMFCs) has the potential to reach lower costs than the current proton exchange membrane fuel cells (PEMFCs), the incumbent technology. A significant difference between HEMFCs and PEMFCs is the location of water production within the cell. In PEMFCs, the water is produced on the cathode, limiting oxygen transport. In HEMFCs, the water is produced on the anode where the fuel is pure hydrogen. This allows the cathode to be optimized for oxygen transport without the presence of excess liquid water. Limiting current analysis, a technique previously used in PEMFCs, is adopted in HEMFCs to evaluate the oxygen mass transport resistances for different sections of the cathode. Through elimination of the microporous layer (MPL), gas diffusion layer (GDL), and traditional flow field and using porous nickel foam for gas distribution, the transport resistance at an operating condition of 150 kPa(g) and with the cell temperature at 80 °C was decreased from 112 s m −1 to 48 s m −1 , effectively halved. The optimal configuration for performance was found with Ni foam and a GDL, eliminating the MPL and traditional flow field, which vastly improved oxygen transport while maintaining adequate electrical contact with the cathode catalyst layer.

25 ENERGY STORAGE↗
DOE OSTI2026

Ambient ion focusing from a field-free region to a detector: enhanced signal for explosives and drug detection with mass spectrometry

This study demonstrates ion focusing at ambient pressure and increased ion signal by creating a voltage gradient from a field-free region to a detector, thereby improving the detection of chemicals, such as explosives and drugs. At ambient pressure, ion loss and resulting signal reduction pose challenges that limit detection sensitivity in analytical instruments. Techniques to increase sensitivity, such as atmospheric flow tube-mass spectrometry (AFT-MS), extend ion-molecule reaction times but result in significant overall ion loss due to diffusion. Ion manipulation techniques, though challenging at ambient pressure, can mitigate these losses by concentrating ions toward the detector inlet. Using SIMION, ion trajectories were modeled with a voltage gradient applied between a flow tube and a detector, revealing ion focusing at ambient pressure. Experimental verification with an atmospheric flow tube employed both mass spectrometry and Faraday plate detectors to measure ion beam profiles across varying flow rates, tube diameters, and voltage gradients. Application of a voltage gradient effectively directed ions to the axial center of the flow tube, narrowed ion beam width, and increased signal intensity by 5 to 10 times compared to conditions without a voltage gradient. This ion focusing approach shows promise for improving sensitivity in ambient-pressure instruments. This technique has the potential to enhance detection levels in security and forensic applications, with particular benefits for field-portable devices used at checkpoints to identify explosives and drugs.

ambient pressure↗
DOE OSTI2021

Quantitative Measurement of Li-Ion Concentration and Diffusivity in Solid-State Electrolyte

Here, we present a quantitative method to measure the concentration and diffusivity of Li ion in a solid-state electrolyte with nanoscale depth resolution. We designed a standard sample with different depths of trenches and used time-of-flight secondary ion mass spectroscopy, inductively coupled plasma optical emission spectroscopy, three-dimensional (3D) optical microscopy, and electrochemical strain microscopy to obtain effective Li-ion concentration and the corresponding diffusivity as a function of depth. As a result, we verified the dependence of electromechanical strain induced by ionic oscillation on mobile-ion concentration. We also showed the diffusivity change as a function of effective concentration and discussed the difference in diffusivity near the surface and inside the bulk. Our method can be widely used for electromechanical strain in various ionic conductors, rendering our technique universal for quantitative analysis of ionic dynamics at a multiscale.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Kaon Femtoscopy with Lévy-Stable Sources from $\sqrt{s_{NN}}$ = 200 GeV Au+Au Collisions at RHIC

Femtoscopy has the capacity to probe the space-time geometry of the particle-emitting source in heavy-ion collisions. In particular, femtoscopy of like-sign kaon pairs may shed light on the origin of non-Gaussianity of the spatial emission probability density. The momentum correlations between like-sign kaon pairs are measured in data recorded by the STAR experiment, from $\sqrt{s_{NN}}$ = 200 GeV Au+Au collisions at RHIC, BNL. Preliminary results hint at the possible existence of non-Gaussian, Lévy-stable sources, with the likely presence of an anomalous diffusion process in the signal for the identically charged kaon pairs so produced. More statistically significant studies at lower centre-of-mass energies may contribute to the search for the critical end point of QCD.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

All-Atom Molecular Dynamics Simulations of the Temperature Response of Densely Grafted Polyelectrolyte Brushes

Water acts a “good” solvent for most polyelectrolyte (PE) systems due to its high dielectric strength. Theoretical and experimental studies have highlighted some remarkably unconventional properties of strongly water-swollen PE brushes such as a reduction in brush height with increase in temperature. However, an understanding of the atomistic-scale response of the grafted PE chains as well as the local arrangement and organization of the brush-supported counterions and water molecules to changes in temperature is missing. Here, we conduct an all-atom molecular dynamics (MD) study to probe the influence of temperature on the “microstructure” of densely grafted, fully ionized polyacrylic acid (PAA) brushes. The atomistic insights obtained from our study shed light on prior experimental observations and elucidate the key role played by changes in hydrogen bonding network in dictating the hydrophilicity of the brushes. In addition to the temperature-mediated reduction in height of the PE brush layer, we study the influence of temperature on several properties of the brush-supported water molecules such as the number distribution and kinetics of water-water and water-PE hydrogen bonds (HBs), mass density, orientational tetrahedral order parameter, and the activation energy associated with the self-diffusion of water. The effect of temperature on the properties of the brush-trapped counterions is also quantified via changes in their solvation structure, counterion-water radial distribution function (RDF), and the translational mobility. Our findings unravel several hitherto unknown phenomena such as the enhanced propensity for attaining PE brush-induced “water-in-salt”-like scenarios at elevated temperatures, and an increase in the activation energy for the self-diffusion of water with increase in the degree of PE brush-induced nanoconfinement (from ‘bulk water’ to ‘sparsely grafted PE brushes’ to ‘densely grafted PE brushes’). Further, we anticipate that this work will be helpful in improving our predictive capabilities of the temperature response of water-swollen PE brushes, which would be instrumental for better design of several PE brush systems used in a multitude of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Deuterium Permeation Through a Self-Supported Palladium-Silver Membrane in Helium Gas Mixtures

Palladium membranes and membrane reactors can separate and purify tritium from impurities in the plasma exhaust processing system for the fusion energy fuel cycle. Membranes can also act as a continuous separation method to remove tritium from helium streams in the breeder blanket tritium extraction system, such as from the purge gas of solid breeders. To investigate the potential of these membranes for these applications, we performed a deuterium permeation campaign with a self-supported palladium-silver (Pd-25Ag wt%) tube of 0.15 m length, 76 µ m wall thickness, and 3.0 mm inner diameter. A gas mixture of 3.95% D 2 and a balance of He was delivered to the inside of the tube and D permeated radially outwards through the membrane into a vacuum chamber. Permeation experiments were conducted at 300 ° C, 350 ° C, 400° C, and 450°C, from 100 to 1000 sccm total flow rate, and with total pressures of 90, 150, 190, and 250 kPa. Further, deuterium permeation was consistently lower than predicted from diffusion-limited permeation models, thus we developed a transport model that included gas-phase mass transfer and surface reactions to model experimental results. The dissociation constant was optimized to fit the developed model to experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

SDSS-IV MaNGA: The MaNGA Dwarf Galaxy Sample Presentation

We present the MaNGA Dwarf galaxy (MaNDala) Value Added Catalog (VAC), from the final release of the Sloan Digital Sky Survey-IV program. MaNDala consists of 136 randomly selected bright dwarf galaxies with M * < 10 9.1 M ⊙ and M g > -18.5, making it the largest integral field spectroscopy homogeneous sample of dwarf galaxies. We release a photometric analysis of the g, r, and z broadband imaging based on the DESI Legacy Imaging Surveys, as well as a spectroscopic analysis based on the Pipe3D SDSS-IV VAC. Our release includes the surface brightness (SB), geometric parameters, and color profiles, Sérsic fits as well as stellar population properties (such as stellar ages, metallicities, and star formation histories), and emission lines' fluxes within the FOV and the effective radii of the galaxies. We find that the majority of the MaNDala galaxies are star-forming late-type galaxies with $\langle$n Sersic,r $\rangle$ ~ 1.6 that are centrals (central/satellite dichotomy). MaNDala covers a large range of SB values (we find 11 candidate ultra-diffuse galaxies and three compact ones), filling the gap between classical dwarfs and low-mass galaxies in the Kormendy Diagram and in the size–mass/luminosity relation, which seems to flatten at 10 8 < M * /M ⊙ < 10 9 with $\langle$R e,r $\rangle$ ~ 2.7 kpc. A large fraction of MaNDala galaxies formed from an early low-metallicity burst of SF, but also from late SF events from more metal-enriched gas: half of the MaNDala galaxies assembled 50% of their mass at $\langle$z$\rangle$ > 2, while the last 20% was at $\langle$z$\rangle$ < 0.3. Finally, a bending of the sSFR-M * relation at M * ~ 10 9 M ⊙ for the main-sequence galaxies seems to be supported by MaNDala.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Modeling of deposit formation in mesoporous substrates via atomic layer deposition: Insights from pore‐scale simulation

Atomic layer deposition (ALD) has been a promising technique in fabricating membranes and tuning their properties with a precision at the atomic level. Fabrication of zeolitic imidazolate framework (ZIF) membranes using the ligand-induced permselectivation (LIPS) method starts with the formation of an oxide in a mesoporous substrate by ALD and is followed by the transformation of this oxide to ZIF using imidazolate vapor treatment. The objective of the ALD step is to block the mesopores with a thin deposit, that is, one with small penetration depth and small thickness on the top surface of the substrate. Unlike typical ALD on nonporous substrates, where all available sites react per ALD cycle, thin deposit formation in a mesoporous substrate requires that only a small fraction of the available deposition sites (i.e., close to the substrate surface) is subjected to ALD. Consequently, reactant dosing and duration of pulses are important process variables which, together with diffusion and reaction kinetics determine the deposit structure. Quantitative understanding of the interplay of these variables and phenomena can enable the rational design of ALD within mesoporous substrates. Here, we extend our earlier modeling effort considering the coexistence of ALD both inside the pores and on the external surface of the substrate. Finite-volume based models were developed and validated to simulate the two distinct modes of deposition cycle by cycle. The total mass uptake of the substrate with ALD cycles can be predicted using the combined surface deposition and pore reaction–diffusion models as affirmed by in situ quartz crystal microbalance experimental data. The ALD reactor model combined with the deposition model can accurately capture the number of ALD cycles needed to block the pores of the substrate. Based on the model, we designed a modified ALD process and examined the performance of the corresponding LIPS membranes. Furthermore, the present modeling work provides a new understanding of the deposit formation via ALD within mesoporous substrates for a variety of membrane applications.

atomic layer deposition↗
DOE OSTI2020

Critical Practices in Rigorously Assessing the Inherent Activity of Nanoparticle Electrocatalysts

Accurate activity measurements for electrocatalytic materials are the backbone of impactful electrocatalyst research. Inherent to accurate measurements is the correct accounting of the active catalyst sites and the design of experiments to ensure that these sites are participating in the measured reaction. Improvements in electrocatalyst activity for fuel cell reactions (hydrogen oxidation and oxygen reduction) are essential for the widespread adoption of this carbon-neutral energy source. Activities for these half-reactions can be reported in a variety of ways including specific activities, mass activities, volumetric activities, and half-wave potentials. These values are traditionally measured with a rotating disk electrode (RDE) in which the electrocatalyst is supported on a porous active layer film attached to the RDE. To accurately measure electrocatalyst activity with an RDE, two major sources of errors must be addressed: (i) accurate electrochemical surface area (ECSA) quantification and (ii) fast diffusion of reactants through the active layer film. In this contribution, we first aim to detail through RDE experiments and mass transport modeling the potential errors that can be observed when these factors are not properly addressed. We then present recommendations and discuss techniques for properly constructing electrocatalyst thin films and characterizing the ECSA on monometallic and novel alloy electrocatalysts. These practices, when adopted, ensure greater confidence and reliability in reports of electrocatalyst activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The dark matter diffused supernova neutrino background

We consider neutrinos scattering off Milky Way dark matter and the impact of this scattering on supernovae neutrinos. This can take the form of attenuation on the initial flux of neutrinos and a time-delayed flux of scattered neutrinos. Considering dark matter masses above 100 MeV and past Milky Way supernovae, we find this time-delayed flux is nearly constant in time. We call this flux the Dark Matter Diffused Supernova Neutrino Background (DMDSNB), and use Super-K limits on the Diffuse Supernova Neutrino Background (DSNB) flux to set limits on the dark matter-neutrino scattering cross section. We find σ DM-ν /m DM ≲ 2.4 × 10 -24 cm 2 /GeV for m DM ≳ 1 GeV, which is the strongest bound to date on dark matter-neutrino scatterings at MeV energies, and stronger than bounds set from SN1987A neutrino attenuation by an order of magnitude. We end by discussing how the DMDSNB could be distinguished from the DSNB.

dark matter theory↗
DOE OSTI2020

Lyapunov and Clearing Timescales in Planetary Chaotic Zones

Debris disks in planetary systems are known to possess gaps “opened” by planets in their close-to-coorbital neighborhoods; the gaps are free from low-mass material such as planetesimals. We consider the escape process of the initially zero-eccentric particles from the gap zone in a scenario consisting of two basic consequent stages: (1) the particle orbit's eccentricity is inflated, while its specific energy is relatively constant, and (2) the particle orbit's semimajor axis is inflated, while its specific angular momentum is relatively constant. During the first stage, the chaotic transport (diffusion) proceeds along the “staircase” of (p + 1):p (with integer p ≫ 1) overlapping particle–planet resonances, and during the second stage, it proceeds along the p:1 particle–planet resonance staircase. A specialized two-dimensional area-preserving map (a “tokamap” version) is derived to describe the first stage, while a multiharmonic Kepler map theory is used to describe the second stage. We derive the μ (mass parameter) scaling for the clearing timescale in the planetary chaotic zone. At small μ, it turns out to be inverse-quadratic in μ. The μ scaling for the Lyapunov timescale inside the gap is also derived. The derived scalings are in qualitative agreement with available numerical-experimental data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Measurement of gas-concentration-driven permeation for the examination of permeability, solubility, and diffusivity in varying materials

This manuscript describes the development and operation of an apparatus for the measurement of steady-state and transient gas permeation through different types of solid materials with varying geometries. It is capable of operation from 293 K to 673 K and could theoretically be used with any non-corrosive gas or a mix of gases, although only hydrogen isotopes are used in the current study. A quadrupole mass spectrometer is used to measure permeation fluxes as low as 1011 molecules/s. This unique test setup allows for the simultaneous measurement of diffusivity, solubility, and permeability. Furthermore, varying the pressure in the fore-sample volume allows for tests of Sievert’s law and can give information on surface effects.

Young, Katherine T. (ORCID:0000000285845576)↗
DOE OSTI2024

Micro-Quantification of Helium-3 and Helium-4 in TPBAR Components

This report documents the method development for measuring helium isotopes in micrometer-sized samples of tritium producing burnable absorption rod (TPBAR) components. Helium isotopes were measured as a tracer for tritium, which decays to 3 He with a half-life of 12.33 years. Getter and cladding materials from the TPBARs were analyzed, as they are designed to trap tritium. Therefore, constraining the diffusivity of tritium through these materials is of key importance. To first establish the reliability of the noble gas mass spectrometer, a reference gas with a relative 4 He/ 3 He ratio of 1000 was pre-mixed. This standard was measured several times to ensure measurements were reproducible. Unirradiated and irradiated getter and cladding samples of TPBARs were cut into 1-100 µm 3 cubes and analyzed for 3 He and 4 He content. The unirradiated materials had helium content equal to or less than that of the measured instrument background. Irradiated cladding also had instrument background levels of helium while irradiated getters had elevated levels of 3 He, interpreted to be the decay product of tritium. No diffusion of 4 He was observed in any of these materials, however, indicating that the 3 He detected in the irradiated getter was produced in situ after tritium diffusion and decay. These findings validate this method as a way to trace tritium diffusion in reactor materials.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Solid‐State Reaction Heterogeneity During Calcination of Lithium‐Ion Battery Cathode

Abstract During solid‐state calcination, with increasing temperature, materials undergo complex phase transitions with heterogeneous solid‐state reactions and mass transport. Precise control of the calcination chemistry is therefore crucial for synthesizing state‐of‐the‐art Ni‐rich layered oxides (LiNi 1‐x‐y Co x Mn y O 2 , NRNCM) as cathode materials for lithium‐ion batteries. Although the battery performance depends on the chemical heterogeneity during NRNCM calcination, it has not yet been elucidated. Herein, through synchrotron‐based X‐ray, mass spectrometry microscopy, and structural analyses, it is revealed that the temperature‐dependent reaction kinetics, the diffusivity of solid‐state lithium sources, and the ambient oxygen control the local chemical compositions of the reaction intermediates within a calcined particle. Additionally, it is found that the variations in the reducing power of the transition metals (i.e., Ni, Co, and Mn) determine the local structures at the nanoscale. The investigation of the reaction mechanism via imaging analysis provides valuable information for tuning the calcination chemistry and developing high‐energy/power density lithium‐ion batteries.

Chemistry↗
DOE OSTI2023

Characterizing the Impact of Oligomerization on Redox Flow Cell Performance

Abstract Redox flow batteries (RFBs) are hindered by complex failure modes, particularly crossover through the membrane, resulting in capacity fade and reduced cycling efficiencies. Redox‐active oligomers (RAOs) have recently been proposed for mitigating this phenomenon while maintaining sufficient transport properties; however, to date, few studies have quantified how the chemical and electrochemical properties of RAOs influence their performance in redox flow cells. Here, we demonstrate that oligomeric derivatives of 2,2,6,6‐tetramethylpiperidine 1‐oxyl (TEMPO) exhibit lower diffusivities than the monomeric species but retain facile charge transfer characteristics. The size‐dependent variations in mass transport rates directly translate to differences in flow cell polarization and symmetric cycling performance. Post‐mortem analyses reveal that oligomerization does not meaningfully alter decay processes as evinced by similar capacity fade across all species. Broadly, these findings corroborate and extend upon previously developed relationships between molecular size, electrochemical properties, and flow cell performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ultra diffuse galaxies in the MATLAS low-to-moderate density fields

Recent advances in deep dedicated imaging surveys over the past decade have uncovered a surprisingly large number of extremely faint low surface brightness galaxies with large physical sizes called ultra diffuse galaxies (UDGs) in clusters and, more recently, in lower density environments. As part of the Mass Assembly of early-Type GaLAxies with their fine Structures (MATLAS) survey, a deep imaging large program at the Canada-France-Hawaii Telescope (CFHT), our team has identified 2210 dwarf galaxies, 59 (~3%) of which qualify as UDGs. Averaging over the survey area, we find ~0.4 UDG per square degree. They are found in a range of low to moderate density environments, although 61% of the sample fall within the virial radii of groups. Based on a detailed analysis of their photometric and structural properties, we find that the MATLAS UDGs do not show significant differences from the traditional dwarfs, except from the predefined size and surface brightness cut. Their median color is as red as the one measured in galaxy clusters, albeit with a narrower color range. The majority of the UDGs are visually classified as dwarf ellipticals with log stellar masses of ~6.5 – 8.7. The fraction of nucleated UDGs (~34%) is roughly the same as the nucleated fraction of the traditional dwarfs. Only five (~8%) UDGs show signs of tidal disruption and only two are tidal dwarf galaxy candidates. A study of globular cluster (GC) candidates selected in the CFHT images finds no evidence of a higher GC specific frequency S N for UDGs than for classical dwarfs, contrary to what is found in most clusters. The UDG halo-to-stellar mass ratio distribution, as estimated from the GC counts, peaks at roughly the same value as for the traditional dwarfs, but spans the smaller range of ~10 – 2000. Finally, we interpret these results to mean that the large majority of the field-to-group UDGs do not have a different formation scenario than traditional dwarfs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Investigations on a fuzzy process: effect of diffusion on calibration and particle identification in Liquid Argon Time Projection Chambers

Ionization electron diffusion in Liquid Argon Time Projection Chambers (LArTPCs) has typically been considered at the detector design stage, but little attention has been given to its effects on calibration and particle identification. We use a GEANT4-based simulation to study how diffusion impacts these techniques, and give consideration to how this effect is simulated. We find that diffusion can cause a drift-dependent bias to both the median and Most Probable Value (MPV) of dQ/dx distributions. The bias is estimated to be ~2.5% (median) and ~5.0% (MPV) for typical maximum drift times in currently running LArTPCs before adding detector specific considerations such as electric field non-uniformities. This information indicates that these metrics should not be used for calibration without care, contrary to the conventional wisdom. The impact of diffusion on the ability of LArTPCs to separate muons and protons is small, and not expected to pose any problems in future detectors. Diffusion may however be a significant source of systematic uncertainty when separating particles of more similar masses (muons and pions, kaons and protons). Separation of such populations may be improved by implementation of a drift-time dependent particle identification.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Two-dimensional simulations of internal gravity waves in a $\mathrm{5M_⊙}$ zero-age-main-sequence model

Main-sequence intermediate-mass stars present a radiative envelope that supports internal gravity waves (IGWs). Excited at the boundary with the convective core, IGWs propagate towards the stellar surface and are suspected to impact physical processes such as rotation and chemical mixing. Using the fully compressible time-implicit code MUSIC, we study IGWs in two-dimensional simulations of a zero-age-main-sequence 5 solar mass star model up to 91 percent of the stellar radius with different luminosity and radiative diffusivity enhancements. Our results show that low-frequency waves excited by core convection are strongly impacted by radiative effects as they propagate. This impact depends on the radial profile of radiative diffusivity which increases by almost 5 orders of magnitude between the centre of the star and the top of the simulation domain. In the upper layers of the simulation domain, we observe an increase of the temperature. Our study suggests that this is due to heat added in these layers by IGWs damped by radiative diffusion. We show that non-linear effects linked to large amplitude IGWs may be relevant just above the convective core. Both these effects are intensified by the artificial enhancement of the luminosity and radiative diffusivity, with enhancement factors up to 10 4 times the realistic values. Our results also highlight that direct comparison between numerical simulations with enhanced luminosity and observations must be made with caution. Finally, our work suggests that thermal effects linked to the damping of IGWs could have a non-negligible impact on stellar structure.

79 ASTRONOMY AND ASTROPHYSICS↗