Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifecycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Impacts of phase state and water content on secondary organic aerosol formation and partitioning (Final Technical Report)

Secondary organic aerosols (SOA) account for a major fraction of particulate matter in the atmosphere, affecting climate, air quality, and public health. SOA formation and evolution are highly complex processes involving both chemical reactions and transport of molecules in air, at particle surfaces, and within particles. The state of the matter, or “phase state,” comprising SOA can vary from a liquid, over an amorphous semi-solid, to a glassy solid, depending on chemical composition, water content, relative humidity (RH), and temperature. The occurrence of glassy and amorphous semi-solid states can pose limitations on the rate of transport of molecules, affecting gas-particle interactions and challenging the treatment of SOA in atmospheric models. The objective of this project was to improve fundamental understanding of the interplay of the phase state of particles and water content on the evolution of SOA formation. We have developed a method to estimate the glass transition temperature (T g ) of organic compounds to predict the phase state and viscosity of SOA. This method has been applied to high resolution mass spectrometry data of various types of SOA, achieving a good agreement with viscosity measurements. In addition, the viscosity estimation method was implemented into a regional model CMAQ to simulate diel and seasonal variations of SOA phase state over the U.S. Applying kinetic multilayer modeling, we analyzed laboratory experiments and ARM field measurements (e.g., HI-SCALE) on kinetic limitations of amine uptake. We have also conducted numerical simulations to estimate equilibration timescales of SOA partitioning. Overall, we have evaluated the impacts of phase state and water content on SOA lifecycle that should contribute to reducing the uncertainty of SOA representation in regional climate and air quality predictions. The project has yielded 17 publications, in which DE-SC0018349 is explicitly acknowledged. Please see the list of publications as below, followed by summary of research activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Synergistic Coating-Alloy Development for Harsh Environments

The primary objective of the work was to demonstrate model alloy-coating combinations with: A. Improved oxidation resistance with a barrier coating by at least 2x vs. uncoated alloy; B. Uniform coating on a greater than 100:1 aspect ratio structure; and C. Expected reduction of lifecycle cost of a component of >25% based on customer inputs. All three objectives have been achieved.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Techno-Economic Impact of a Smart Battery Sorting System

Create analytical framework to capture costs and benefits of the automated sorting into battery recycling including the development and deployment of various types of battery recycling technologies such as pyrometallurgical, hydrometallurgical, and direct recycling. Li Industries, Inc. is a Virginia startup company focused on reinventing how lithium-ion batteries (LIBs) are recycled. Li Industries is focused on developing direct LIB recycling and automated battery sorting technologies in order to reduce the environmental impact of the LIB lifecycle. This work is to be conducted in support of the American-Made Challenges Lithium-Ion Battery Recycling Prize. Li Industries and NREL will work together to understand how novel technologies, such as those being developed by Li Industries, can impact the development and economics of the battery recycling industry. This voucher is being used to evaluate the profitability of an automated sorting system developed by Li Industries and the potential effect this increased value could have on the domestic lithium-ion battery (LIB) recycling industries in the United States. NREL has developed the Lithium-Ion Battery Resources Assessment (LIBRA) system dynamics model to project the future viability of the US LIB manufacturing and recycling industries under varying technoeconomic conditions and battery adoption scenarios over the coming decades. Additional logic was added to LIBRA to analyze the role automated sorting of recycling feedstock could play in the buildout of the industry and the impacts it has on the recovery of end-of-life (EOL) battery materials. This report summarizes the outcomes of this modeling analysis in the US context through a series of sensitivity analyses run for a range of values of a given input dimension and compared across the unsorted or automated sorting cases for LIB recycling feedstock. For greater detail on the process and analysis, the researchers are publishing a forthcoming journal article titled Techno-Economic Impact of a Smart Battery Sorting System for Lithium-Ion Battery Recycling and Mineral Recovery in the United States by Weigl, et al. In the event the article is not accepted by any currently seeking publication in academic or industry journal, it may be published by NREL. CRADA benefit to DOE, Participant, and US Taxpayer: assists laboratory in achieving programmatic scope competencies, uses the laboratory's core competencies.

25 ENERGY STORAGE↗
DOE OSTI2021

Towards a New Supply Chain Cybersecurity Risk Analysis Technique

Supply chain cyber-attacks, such as the SolarWinds Orion attack, are occurring with greater frequency. These attacks compromise a digital device before it is sent to customers, bypassing traditional security controls to remain persistent and undetected in operational environments. While supply chain attacks are prevalent, methods for analyzing the risk of these attacks are currently unavailable. This paper proposes new supply chain cyber-attack difficulty and risk metrics to evaluate the relative risk of an attack throughout the supply chain lifecycle. Difficulty metrics for each stakeholder in a digital device’s supply chain (e.g., hardware manufacturing, firmware development, software development, storage, and distribution entities) are calculated using scores from cybersecurity maturity questionnaires in a Bayesian Network leaky Noisy-MAX model. These difficulty metrics are then used to calculate an overall supply chain cyber-attack risk. Vulnerability and recoverability metrics are also proposed to evaluate the relative stakeholder influence in the attack risk. These proposed relative risk metrics enable continuous supply chain monitoring, provide decision-makers with information necessary for improved supplier selection, and help drive improvements in the cybersecurity posture of the stakeholders in their supply chain.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

High Energy Systems for Transforming CO 2 to Valuable Products (Final Report)

The objective of this project is to develop the Direct E-Beam Synthesis (DEBS) process that uses high-energy electron beams (E-Beam) to break chemical bonds. This allows the production of valuable chemicals, such as acetic acid, methanol, and carbon monoxide, at relatively low severity (pressure near one atmosphere and temperatures <150°C) from near-pure CO 2 captured from a pulverized coal-fired power plant and methane, imported as natural gas. Creating such valuable products will offset the cost of carbon capture and storage. Through this project, we have designed, constructed, and operated an E-Beam reactor to examine the feasibility of performing dry reforming reaction without a catalyst using only DEBS. We have verified the production of syngas with 1:1 H2:CO ratio and calculated that the energy cost for conversion is about 5.2 eV/molecule of product for dry reforming reaction which is similar to the energy cost for conversion using conventional thermochemical conversion but under significantly milder conditions (room temperature and atmospheric pressure). We have performed a technoeconomic analysis (TEA) to estimate the total capital requirement and the cost of production for a 99.4 MMSCFD syngas production plant via non-catalytic Direct E-Beam Synthesis (DEBS) technology utilizing a high-energy electron beam (E-Beam) accelerator. No assumption is made for syngas utilization downstream, and the incoming reactants are pure CO 2 from carbon capture (assumed to be at zero cost) and natural gas. The Total As-Spent Cost (TASC) was calculated to be $\$242.5$ million, resulting in a levelized cost of syngas (LCOS) of $\$175.84$/tonne (metric) at a natural gas price of $\$6.24$/MMBTU1. The cost of syngas is primarily determined by the price of natural gas. If the cost of the CO 2 feedstock is assumed to be non-zero, then the price of the CO 2 feed also heavily influences the levelized cost of syngas. The potential impact on the cost of electricity from syngas revenue is significant. Following DOE NETL’s guidance, a lifecycle analysis (LCA) was conducted to compare the cradle-to-gate life cycle emissions of GTI Energy’s novel Direct E-Beam Synthesis (DEBS) process that produces syngas via the reaction of methane and carbon dioxide to the emissions of a state-of-the-art Steam Methane Reforming (SMR) process that also produces syngas via the reaction of methane and steam. The DEBS process results in less GHG emissions than SMR (with CO product as the basis of comparison). openLCA was used for the LCA and the results show that the total global warming potential (GWP) of DEBS is 0.981 kg CO 2 e per kg CO product, while the SMR process has a global warming potential of 2.573 kg CO 2 e per kg CO product. The ratio of the GWP of the proposed product system to the comparison product system is 0.381. This percent change is 61.9% lower GWP than SMR.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Novel Modular Electrocatalytic Processing for Simultaneous Conversion of Carbon Dioxide and Wet Shale Gas into Valuable Products (Final Report)

This report examines solid oxide electrolyzer cell (SOEC) technology as an alternative process for the manufacture of carbon monoxide (CO) and the separation of ethane (C 2 H 6 ) from wet natural gas (WNG). SOEC cathodes for the electrochemical reduction of carbon dioxide (CO 2 ) to CO and SOEC anodes for the selective electrochemical oxidation of C 2 H 6 to ethylene (C 2 H 4 ) are described and presented. Lifecycle and techno-economic analyses (LCA and TEA) utilizing SOEC technology for the production of CO are also reported.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

NRAP Recommended Practices for Containment Assurance and Leakage Risk Quantification

This report presents recommendations for quantitatively assessing and managing leakage risk and effective containment assurance at geologic carbon storage (GCS) sites, amidst uncertainty in site characteristics and performance. These recommended practices are a product of the U.S. Department of Energy’s (DOE) Office of Fossil Energy and Carbon Management’s National Risk Assessment Partnership (NRAP)—a multi-year collaborative research effort of Lawrence Berkeley National Laboratory, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, National Energy Technology Laboratory, and Pacific Northwest National Laboratory. These recommended practices are organized as a set of conceptual workflows that correspond with the stages of the GCS project lifecycle. They consider aspects of site characterization, quantification of potential leakage, assessing the spatial extent of potential environmental impacts, optimizing monitoring design for detection of potential leakage, evaluation of concordance between monitored and forecasted reservoir response, assessing conformance with expected/accepted performance, and determination of the timeline over which risk of impactful leakage can be expected to abate. These conceptual workflows are intended to aid stakeholders in making risk management decisions at GCS sites and to support development of sound, risk-based justifications for characterizing the subsurface, defining area of potential leakage impact, designing site monitoring plans, selecting leakage risk management/mitigation alternatives, and estimating site closure timelines.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Storing Co 2 in Built Infrastructure: Co 2 Carbonation of Precast Concrete Products

The overall objective of the proposed study was to advance the technical understanding of CO 2 incorporation into novel cementitious materials for the development of high value products that provide a net reduction in carbon emissions. This project combined two primary phases of research that addressed technical barriers related to (i) optimizing CO 2 storage capability of cementitious materials, (ii) evaluating and enhancing physical properties of novel carbonated materials, and (iii) assessing the reductions in life cycle CO 2 emissions attributed to CO 2 carbonation of precast cementitious materials. Engineered cementitious composites (ECC) are a class of highly ductile concrete composites that have been shown to be very durable when used in the built environment. CO 2 carbonation of ECC was examined in this study and it was found that precast ECC specimens could sequester up to 35% CO 2 by cement mass after 24 hours of curing at a CO 2 pressure of 0.5 MPa and 23°C and had a strain capacity of 3%. Carbonation conditions were optimized at the bench-scale and then utilized to create full-scale CO 2 -cured ECC railroad ties that were field tested on a train track. Rail ties were selected for this initial assessment of CO 2 storage in precast concrete materials due to the large market for concrete ties in the railroad industry. Although the full-scale rail ties passed all of the required American Railway Engineering and Maintenance-of-Way Association qualifying mechanical tests, on-track testing of the CO 2 -cured ECC rail ties was unsuccessful due to fiber alignment in the ECC the during the rail tie casting process which prevented the material from achieving the expected level of strain capacity. This result highlights the challenge in scaling up bench-scale processes to full-scale product manufacturing and requires additional investigation into the casting process of large-scale infrastructure elements using ECC combined with carbonation curing. Life cycle assessment of a CO 2 -cured ECC rail tie versus a traditional concrete rail tie indicates that the ECC tie can have lifecycle carbon savings of between 11% and 51% depending on how much longer its useful lifetime is compared to traditional concrete rail ties. Both carbon and cost savings are driven by a reduction in the need to replace broken rail ties, so the key factor is the extent to which a CO 2 -cured ECC rail tie will have increased lifetime durability compared to alternative rail ties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Shear Assisted Processing and Extrusion (ShAPE) of Lightweight Automotive Components (CRADA 418)

Shear Assisted Processing and Extrusion (ShAPE) was developed to manufacture non-circular multicell profiles from secondary aluminum. This was accomplished by integrating a porthole die approach within the rotating ShAPE process. Complexity of the profile geometry was deliberately advanced over the course of the project from round to square, to asymmetric trapezoidal, to two-cell asymmetric trapezoidal. Aluminum alloy 6063 in the form of briquettes (compacted shreddings and engineered machining chips) and castings from pre-consumer industrial scrap were utilized as the feedstock. Tensile properties were shown to exceed the ASTM minimum standard and ASM typical values with the best results reaching yield strength = 247 ± 10 MPa, ultimate tensile strength = 271 ± 10 MPa, and uniform elongation = 16.5 ± 2.4%. These values were achieved for porthole extrusion using unhomogenized castings made from 100% aluminum 6063 industrial scrap. The ability to extrude unhomogenized billet was made possible by in situ conversion of plate-like β-type Fe-rich intermetallics to more extrudable needle-like α-type which is not possible with conventional extrusion. By eliminating the need to dilute iron with primary aluminum during the recycling process, savings of >90% on lifecycle carbon footprint and >50% on embedded energy could ultimately result in lower cost, more environmentally friendly, automotive components.

42 ENGINEERING↗
DOE OSTI2023

Novel Modular Electrocatalytic Processing for Simultaneous Conversion of Carbon Dioxide and Wet Shale Gas into Valuable Products

This report examines solid oxide electrolyzer cell (SOEC) technology as an alternative process for the manufacture of carbon monoxide (CO) and the separation of ethane (C 2 H 6 ) from wet natural gas (WNG). SOEC cathodes for the electrochemical reduction of carbon dioxide (CO 2 ) to CO and SOEC anodes for the selective electrochemical oxidation of C 2 H 6 to ethylene (C 2 H 4 ) are described and presented. Lifecycle and techno-economic analyses (LCA and TEA) utilizing SOEC technology for the production of CO are also reported.

03 NATURAL GAS↗
DOE OSTI2023

Manufacturing Demonstration Facility: Development and Evaluation of Hybrid Manufacturing Toolpaths

The integration of additive manufacturing (AM) capabilities on Computer Numerical Control (CNC) systems allows for the expansion of additive manufacturing to a wide range of part and tool repair operations. This multi-tasking integration, termed hybrid manufacturing, has been researched by others in the past, and Autodesk has been critical in developing process planning and toolpath algorithms for hybrid systems. Objectives and Tasks: Hybrid manufacturing systems enable both additive and subtractive capabilities in a single manufacturing workcell. These systems have the potential to impact a variety of industries, including the tool and die industry due to their repair, refurbishment, and complex geometry manufacturing capabilities. While there has been significant development of toolpath planning for both subtractive and additive processes independently, there has been little, if any, development of hybrid toolpath planning to integrate both processes during the manufacturing design and toolpath generation stage of a product’s lifecycle. Furthermore, additive toolpath planning has been limited to planar manufacturing, but this limitation could be overcome as hybrid CNC machines have multi-axis control. The objectives of this research include: - Development and demonstration of independent three-, four-, and five-axis toolpath generation algorithms for both additive and subtractive processes, and - Development, demonstration, and integration of three-, four-, and five-axis hybrid process planning and toolpath generation algorithms for hybrid additive and subtractive processes. The team will leverage the widely used Autodesk Fusion 360 product design and manufacturing (CAD/CAM) platform to achieve these objectives. Autodesk will provide the expertise in CAD tools, as well as access to their new CAD/CAM manufacturing tools (3-, 4-, and 5-axis milling, additive toolpath generation). ORNL will provide expertise in additive manufacturing toolpath generation, process planning, and manufacturing validation. By the end of the program, the team will have developed and validated multi-axis milling, additive manufacturing, and hybrid manufacturing on an industrial hybrid CNC system (Mazak 500-VC).

42 ENGINEERING↗
DOE OSTI2023

A Detonator Design Guide and Knowledge Capture System [Slides]

Engineering design--good design--is a blend of engineering and science; this is especially true for of explosive detonator design. Detonators are complex components with interrelated mechanical, electrical, and chemical attributes, all of which must be balanced to achieve a robust and reliable, working whole. This design guide presents an integrated, lifecycle approach to the design process, bringing together engineering design with science, emphasizing elegance and subtlety in the design process.

42 ENGINEERING↗
DOE OSTI2023

Deploying Extended Reality (XR) for Digital Operations and Maintenance (O&M) at the Mechanisms Engineering Test Loop (METL)

This report documents the preliminary efforts to digitize operation and maintenance (O&M) activities for the Mechanisms Engineering Test Loop (METL). METL became operational in September 2018 with the mission to provide an ecosystem for Advanced Reactor Development (ARD). METLs flagship facility’s primary purpose is conducting small to intermediate scale tests for Sodium Fast Reactors (SFR). Its resemblance to commercial SFR’s intermediate heat transport system, prototypic operating conditions, and industrial construction practices/materials provides the overarching benefit of establishing a proving ground for emerging operations and maintenance (O&M) activities such as incorporating Extended Reality (XR) applications throughout the program lifecycle.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Oak Ridge National Laboratory Security by Design: A Plant Design and Component-Based Approach to Technical Solutions to Insider and Outsider Threat

Security costs for nuclear reactors have been shown to rise over the lifecycle of a nuclear facility as new threats, security weaknesses, and the generic threat profile of the plant location change over time. This paper conducts a review of the technological gaps that currently exist in Security by Design (SeBD) based on the literature available and attempts to close those gaps through proposing technological constructs and processes that can integrate safety and security in the design process of a plant, with a primary focus on SMR technology. Under the new modular and mass manufacturing regime, where plant designs attempt to reduce costs with potential economies of scale and modular construction, the current SeBD definitions focusing on state level regulators are not considered adequate since the licensing stage is often too late in the design process to integrate the true cost savings of SeBD. Thus, this paper attempts to remedy the current logic in order to allow for continuous implementation of security alongside the development of the safety concept for the plant. If adopted within the design process the establishment of this type of technology will allow for a technological ecosystem to evolve that will imbed security concepts into the physical design of the components of the plant.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Unique nanotechnology converts carbon dioxide to valuable products

Carbon capture and management are increasing challenges associated with global warming. Current commercial-scale carbon dioxide (CO 2 ) capture technologies are associated with a heavy economic penalty – they require at least one-third of the plant’s steam and power to operate. The objective of this project was to develop and test an innovative nanotechnology that can utilize CO 2 , from coal-based power systems or other industrial sources, as the primary feedstock to produce commercially valuable products to potentially offset the cost of CO 2 capture. The scope of this project includes conversion of CO 2 to nanomaterials using two unique amino acids in synthetic flue gases and the completion of a process design and techno-economic and lifecycle analyses to demonstrate the economic feasibility and environmental impact of the developed technology. The International Energy Agency predicts that fossil fuels will continue to play a significant role in meeting global energy demand. The goal of the research is to lead to an affordable and transformational CO 2 capture and reuse technology that will reduce the release of CO 2 thereby reducing global climate variability and its enormous impact on our daily lives.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Restoration Hydro: A Watershed Approach to Standard Modular New Hydropower

The objectives of FOA DE- FOA-0001836- “Standard Modular Hydropower” included designing a standardized, modular, and environmentally compatible hydropower schematic for implementation in greenfield sites that generate up to 10 MW of capacity. Utilizing funds competitively awarded under DOE’s Water Power Technologies Office, the Natel Energy team developed a concept for modular new stream reach (NSR) hydropower that incorporates multi species upstream and downstream fish passage, improved river channel connectivity, and recreational modules. The in-stream design of the collective modules minimized site specific design and maximized the opportunities for modularity. Financial data was also presented using actual costs from regional suppliers, with figures provided in 2022 dollars. While the project team did not address potential permitting process improvements, the site selection criteria did consider established barriers to hydropower development such as tribal and preserved lands, interconnection proximity, and endangered species to exclude or deprioritize. The project’s design schematic met the objectives of the FOA, and presented a unique solution that targets alluvial pockets as natural features for sustainable development. Natel’s concept also incorporated the company's fish-safe Restoration Hydro Turbine for safe downstream passage, while featuring a rock arch that integrates fish passage, water, recreation, and grade control modules (including sediment). Alignment with the Department of Energy Office of Energy Efficiency and Renewable Energy (EERE) “Innovative Design Concepts for Standard Modular Hydropower and Pumped-Storage Hydropower” Program: According to the Hydropower Vision (DOE, 2016), approximately 16 GW of hydropower growth is possible with the development of technology solutions that balance efficiency, economics, and environmental sustainability. The desired outcome of the SMH program is transformational innovation specifically in the site identification, conceptual, and detailed design phases of technology development lifecycles (DOE, 2018). In developing the SMH design schematic, the team aimed to address the opportunities outlined in the Vision through an inverted design philosophy; rather than singularly prioritizing efficiency and power production, the team focused on integrating hydropower with restoration of degraded streams to optimal ecosystem function and provision of exceptional recreation value as design criteria. To achieve this, Restoration Hydro incorporates the principles of nature-based engineering (WWAP, 2018) and biomimicry (Biomimicry NL.) to strategically deploy complementary combinations of permanent, semi-permanent, and ephemeral low-head structures - such as natural and engineered log jams - that harness geomorphological and hydrological processes at the landscape-scale. Primary applications of Restoration Hydro include: 1) restoration of degraded watersheds’ natural ecological function and enhancement of hydrological connectivity; and 2) creation of associated co-benefits to hydro production, including increased groundwater recharge, improved sediment transport and management, improved water security and water quality. Restoration Hydro projects build upon proven watershed restoration engineering techniques by integrating hydropower turbines into low-head structures using innovative and evolving civil works concepts that facilitate fish and sediment passage, and in some cases create additional revenue-generating recreational opportunities. Powering low-head structures creates a directly monetizable layer of economic value in the form of flexible, reliable, renewable energy on top of the already high-value water, environmental and recreational benefits of watershed and river restoration. The approach aims to create a virtuous, self-reinforcing cycle whereby Restoration Hydro projects support the scaling of ecosystem restoration activities, creating a water-energy-carbon multiplier effect that, through the principles of adaptive change management: 1) improves the resilience of landscapes and downstream population centers for changing hydrological cycles; 2) creates a reliable energy resource that facilitates the integration of intermittent renewable power sources into grids; and 3) supports climate change mitigation through grid decarbonization and enhanced ecosystem carbon capture and retention.

13 HYDRO ENERGY↗
DOE OSTI2023

Hazard and Operability Study for the Ammonia Fuel Systems at the National Transportation Research Center

Oak Ridge National Laboratory’s (ORNL’s) Buildings and Transportation Science Division (BTSD) plans to operate research engines fueled by ammonia in two engine test cells at the National Transportation Research Center (NTRC). A scientific need has recently emerged to evaluate the suitability of liquid anhydrous ammonia as a low-lifecycle-carbon fuel source for difficult-to-electrify transportation sectors, including the marine sector. Therefore, BTSD plans to install an ammonia storage and delivery system to 2360 HVC engine research labs L125 (Cell 3) and L111 (Cell 7) capable of delivering 35 and 75 lb/h, respectively. These laboratories are specifically designed to allow for engine and fuels research and development, and they have existing safety systems for mitigating risks associated with toxics and flammables. Anhydrous ammonia is toxic and flammable, and the system will use relatively large quantities compared with standard gas bottles. Ammonia is one of the most widely produced chemicals in the world, and the hazards associated with toxicity and flammability are well understood. Ammonia storage for use in engine research at NTRC is anticipated to take the form of an ammonia tank with capacity of 1,000 water gallons; this quantity will remain below the threshold quantity of 10,000 lb (~2,000 gal) used both by the US Environmental Protection Agency for reporting under the Emergency Planning and Community Right to Know Act and for Risk Management Program requirements, and also by the US Occupational Safety and Health Administration for Process Safety Management requirements. ORNL’s Environmental Protection Services Division was also consulted to verify that the quantities of ammonia anticipated to be used would be in compliance with environmental regulations. The Environmental Protection Services Division staff confirmed that the anticipated quantities fall below ORNL’s permit thresholds. However, because of the hazards associated with anhydrous ammonia, the quantities to be used, and the limited experience with similar quantities of ammonia at ORNL, BTSD decided to perform a hazard and operability (HazOp) study on the ammonia storage and delivery system.

33 ADVANCED PROPULSION SYSTEMS↗