Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interactive materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Net lithium deposition and dominant self-sputtering in lithium tokamak experiment-β with a liquid lithium wall

We observed enhanced net lithium deposition and lithium erosion, possibly dominated by physical sputtering of lithium by lithium-ion bombardment, on the outer plasma-facing surface in the Lithium Tokamak eXperiment-β (LTX-β) during liquid lithium wall operations. Silicon crystal samples with micro-trenches (30 μm × 30 μm × 2–7 μm deep) were exposed to hydrogen plasmas in LTX-β for solid and liquid lithium wall operations. Post-mortem analysis using X-ray photoelectron spectroscopy combined with argon ion sputtering measured net lithium deposition of 8.2 or 21 nm on the silicon crystal surface exposed for ~ 50 repeated shots of ~ 50-ms hydrogen plasma discharges during the liquid lithium wall operations at a vessel temperature of 475 K. Energy dispersive X-ray spectroscopy measured oxygen concentration patterns on the micro-trench floors, which were due to oxidized lithium deposition. Using the inhomogeneous oxygen concentration pattern caused by an ion-shadowing effect associated with the micro-trench’s geometric structure, we determined a polar incident ion direction of 68.4 ± 1.6° referenced to the surface normal direction. This observation was well-explained by the hypothesis that self-sputtering of Li was a dominant lithium erosion source in addition to lithium sputtering by hydrogen bombardment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Tungsten erosion during L-mode discharges in the DIII-D SAS-VW divertor

A series of L-mode plasma discharges was performed in the DIII-D tokamak to assess the impact of outer strike point (OSP) position and toroidal magnetic field direction on erosion and core contamination potential of the recently-installed, tungsten-coated Small Angle Slot (SAS-VW) divertor. In one discharge, in-slot emission spectroscopy measured an<48 % increase in the W gross erosion rate when the OSP was moved 3 cm outwards, away from the V-shaped vertex of the slot divertor. However, the effective W yield (erosion rate divided by the incident D flux) was, overall, insensitive to changes in OSP location. Consistently low estimates of the effective W yield based on measurements taken a few cm outwards from the vertex suggest potentially significant C surface contamination. No W emission signal was detected when orienting the toroidal magnetic field such that the ion B×∇B drift direction is pointed away from the X-point. However, measurements of W content in the plasma core for both toroidal magnetic field directions suggest the presence of additional, unmeasured sources of erosion. The difference in the measured core W density with OSP position is much greater than the difference in the measured erosion rates, which may suggest that the leakage of eroded impurities out of the divertor is governed primarily through the parallel ion temperature gradient and friction forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Innovative laser-based methods for monitoring fuel retention in ITER

This paper addresses the challenge of tritium inventory management in ITER and future fusion reactors, highlighting the importance of accurate tritium measurement and its spatial distribution within the vacuum vessel. Given ITER’s operational constraints, especially the limit on tritium retention, precise measurement is essential for both safety and regulatory compliance. To tackle these questions, the paper presents the T-monitor diagnostic system developed by Forschungszentrum Jülich, which uses Laser-Induced Desorption (LID) in combination with Diagnostic Residual Gas Analysis (DRGA) to measure hydrogen isotope concentrations on the surface of divertor tiles. The system integrates a high-power laser, advanced optical components, and a Fast Scanning Mirror Unit (FSMU) for accurate laser spot positioning with rapid response. Designed to measure in situ tritium retention, the diagnostic provides high-resolution spatial mapping, vital for evaluating detritiation strategies. The laser heating process increases the divertor surface temperature to 1600 K within the laser spot, promoting hydrogen isotope desorption. Accurate measurements require the precise control of laser parameters, including pulse duration and spot size, with a target relative accuracy of 20%. The optical design includes both in-vessel and ex-vessel components, such as durable high-reflectivity mirrors made of gold and copper, selected not only for their infrared performance but also for their transmission of visible wavelengths for observation purposes. To protect optical components from contamination, a pneumatic shutter is used.

Hydrogen isotopes↗
DOE OSTI2026

Testing of spark plasma sintered porous tungsten under neon glow discharge cleaning conditions in LTX-β

This paper demonstrates that tungsten (W) based powder reconstituted Plasma Facing Components (PFCs) can be treated in situ in a fusion reactor to remove W oxide and carbon (C) contamination. Doing so should ease the challenge of using these materials in a Capillary Porous System (CPS) with lithium (Li) by enabling better wetting and less contamination of the Li by the underlying CPS. Most powder reconstituted materials including 3D printed and sintered PFCs suffer from a high surface contamination from oxides and surface C, which complicates their use with liquid Li, a primary PFC candidate. Spark plasma sintered porous W samples were fabricated to be used as a CPS with liquid Li. The samples were characterized in terms of morphology and surface chemistry. Analysis confirms a high C and oxygen (O) contamination. We present the results of exposing this type of CPS to Glow Discharge Cleaning (GDC) cycles in the Lithium Tokamak Experiment-β (LTX-β). The sample was exposed to neon (Ne) GDC in the midplane of the low-field side of LTX-β and analyzed in vacuo with Temperature Programmed Desorption (TPD) and Secondary Ion Mass Spectrometry (SIMS) to investigate the effects the Ne GDC had on the chemical composition of the sample. The combination of Ne GDC with rapid heating as done in TPD was successful in reducing the W oxides and removing the C contamination.

Capillary porous system↗
DOE OSTI2025

Revealing and Engineering Assembly Pathways of 3D DNA Origami Crystals

Recent developments in nanomaterial self-assembly demonstrate the capability to create tailored nanostructures by engineering both the binding coordination and specificity of interactions between material subunits. DNA origami frames allow for the design and fabrication of a broad variety of ordered 3D nanoscale architectures through self-assembly, facilitated by frame-to-frame bonds with designable strength and specificity. While the bond design is critical to lattice formation, the assembly process itself is often dependent on a thermal pathway. Highly ordered nanoscale frameworks, assembled from DNA frames, are predominantly crystallized through thermal annealing pathways that typically follow a “slow” cooling approach, with experiments on the time scale of days yielding DNA origami crystals in the range of 1−10 μm. This extended assembly time scale hinders the study of crystal formation pathways, necessitating a deeper understanding of factors governing successful annealing. Lack of insight into time scale also presents a practical limitation for material fabrication. Here, we investigate key factors affecting lattice assembly pathways and demonstrate that precise engineering of assembly conditions greatly reduces assembly times by up to nearly 2 orders of magnitude. We evaluate the nucleation and growth of crystals via optical and electron microscopy, and small-angle X-ray scattering techniques, mapping the time−temperature-transformation of superlattices from the melt through single-crystal optical tracking. The results show that origami frame assembly can be described by classical nucleation and growth theory, which can, in turn, be used to prescribe the growth of the crystals. Lastly, these findings are applied to demonstrate thermal pathway-dependent assembly, forming distinct assemblies based on different thermal annealing profiles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elucidating the Roles of Local and Nonlocal Rate Enhancement Mechanisms in Plasmonic Catalysis

Plasmonic metal nanoparticles (e.g., Ag, Au, and Cu) constitute a class of materials that interact with light via the excitation of localized surface plasmon resonance (LSPR). Numerous studies have reported substantial enhancements in the rates of chemical reactions on illuminated plasmonic nanoparticle catalysts compared to corresponding systems in the absence of illumination. There are two mechanisms that have been proposed to explain the LSPR-induced chemical reactivity. One mechanism assumes a local plasmon-induced hot charge-carrier-mediated activation of the reactants, while the other assumes an LSPR-induced equilibrium heating of the catalyst, which leads to energy transfer to and chemical reaction of the adsorbed reactants. Here, in this contribution, we developed a setup amenable to accurate in situ catalyst temperature and kinetic reaction rate measurements. We employed this setup to study the LSPR-induced rate enhancement in a case study of the CO oxidation reaction on plasmonic, monometallic Ag nanoparticle catalysts supported on α-Al 2 O 3 . We explored various Ag loadings and clustering levels. Our data show that the equilibrium heating of the catalyst cannot fully explain the illumination-induced plasmonic rate enhancements. This is the case even for high loading and clustering of Ag nanoparticles, where the equilibrium heating significantly increases. Based on the analysis, we propose that local effects, related to the plasmon-induced activation of adsorbates (reactants) via electronic excitation of the reactant or photothermal heating of the reactants that is highly localized to the individual nanoparticles, play a critical role in driving LSPR-induced chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Miscibility of rock and ice in the interiors of water worlds

Abstract Super-Earths and sub-Neptunes are the most common planet types in our galaxy. A subset of these planets is predicted to be water worlds, bodies that are rich in water and poor in hydrogen gas. The interior structures of water worlds have been assumed to consist of water surrounding a rocky mantle and iron core. In small planets, water and rock form distinct layers with limited incorporation of water into silicate phases, but these materials may interact differently during the growth and evolution of water worlds due to greater interior pressures and temperatures. Here, we use density functional molecular dynamics (DFT-MD) simulations to study the miscibility and interactions of enstatite (MgSiO 3 ), a major end-member silicate phase, and water (H 2 O) at extreme conditions in water world interiors. We explore pressures ranging from 30 to 120 GPa and temperatures from 500 to 8000 K. Our results demonstrate that enstatite and water are miscible in all proportions if the temperature exceeds the melting point of MgSiO 3 . Furthermore, we performed smoothed particle hydrodynamics simulations to demonstrate that the conditions necessary for rock-water miscibility are reached during giant impacts between water-rich bodies of 0.7–4.7 Earth masses. Our simulations lead to water worlds that include a mixed layer of rock and water.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Laser-induced fluorescence measurements of ion fluctuations in electron and ion presheaths

Electrostatic flow-driven instabilities have been predicted in the presheath region of low-temperature plasmas for both ion and electron rich sheaths. The ion-acoustic fluctuations that arise from these instabilities can influence transport through an enhanced collision rate. In this work, ion fluctuation spectra were measured using laser-induced fluorescence (LIF) in the presheath region for both sheath polarities. Furthermore, the non-invasive nature of LIF compared to that of probes is particularly valuable for these measurements because the sheath and presheath around a probe may generate their own flow-driven instabilities, which obscure the measurement. Measurements were made using a recently implemented field programmable gate array-based system able to measure ion fluctuation spectra up to 1 MHz using a two-point correlation function technique. Narrow bandwidth ion fluctuations were observed near 0:46 f pi (460 kHz) for both sheath polarities, where f pi is the ion plasma frequency. The observed fluctuations were significantly stronger in the electron sheath case and were observed over a larger volume of plasma. Fluctuations were measured in the ion sheath case at locations far enough from the sheath that linear theory predicts stability, suggesting that ion-acoustic instabilities generated in the relatively small unstable region near the boundary reflect from the sheath and perturb a much larger volume of the plasma. This is expected to affect probes with both ion and electron rich sheaths, meaning any dc biased probe may effectively act as an ion-acoustic wave antenna. These measurements are consistent with the recent theory and particle-in-cell results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Epitaxial Er-doped Y 2 O 3 on silicon for quantum coherent devices

Rare-earth ions have incomplete 4f shells and possess narrow optical intra-4f transitions due to shielding from electrons in the 5s and 5p orbitals, making them good candidates for solid-state optical quantum memory. The emission of Er 3+ in the telecom C-band (1530 nm – 1565 nm) makes it especially attractive for this application. In order to build practical, scalable devices, the REI needs to be embedded in a non-interacting host material, preferably one that can be integrated with silicon. In this paper, we show that Er 3+ can be isovalently incorporated into epitaxial Y 2 O 3 thin films on Si (111). We report on the synthesis of epitaxial, single-crystalline Er:Y 2 O 3 on Si with a narrow inhomogeneous linewidth in the photoluminescence spectra, 5.1 GHz (<100 mK) and an optical excited state lifetime of 8.1 ms. The choice of Y 2 O 3 was driven by its low nuclear spin and small lattice mismatch with Si. Using photoluminescence (PL) and electron paramagnetic resonance, we show that Er 3+ substitutes for Y in the crystal lattice. The role of interfacial SiO x , diffusion of silicon into the film, and the effect of buffer layers on inhomogeneous PL linewidth are examined. We also find that the linewidth decreased monotonically with film thickness but surprisingly exhibits no correlation with the film crystalline quality as measured by the x-ray rocking curve scans suggesting other factors at play that limit the inhomogeneous broadening in Y 2 O 3 films.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Langmuir probe system in the Wendelstein 7-X test divertor

Here, the design and evaluation of the Langmuir probe system used in the first divertor operation phase of Wendelstein 7-X is described. The probes are integrated into the target plates and have individually facetted surfaces to keep the angle of incidence of the magnetic field within an appropriate range for different magnetic configurations. Multiple models for the derivation of plasma parameters from current–voltage characteristics are introduced. These are analyzed with regard to their assumptions and limitations, generalized, and adapted to our use case. A detailed comparison is made to determine the most suitable model. It is found that the choice of model has a large impact, for example, resulting in a change in the inferred temperatures of up to a factor two. This evaluation is implemented in a Bayesian modeling framework and automated to allow for joint analysis with other diagnostics and a replacement of ad hoc assumptions. We rigorously treat parameter uncertainties, revealing strong correlations between them. General and flexible model formulations permit an expansion to additional effects.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Three-dimensional cross-field flows at the plasma-material interface in an oblique magnetic field

This article describes experimental evidence that the magnetic presheath is a fully three-dimensional structure modified by ion–neutral collisions. Velocity distributions of both ions and neutrals, obtained via laser-induced fluorescence, show that cross field ion drifts do not result from entrainment of ions in a flowing neutral background. Ion flows parallel to E x B arise and accelerate to as much as 0.2c s within several ion gyroradii of the boundary surface, where c s is the sound speed. Within measurement resolution, the onset of the E x B aligned flow occurs at the same distance to the surface that ions begin to deflect from travel along magnetic field lines. Collisional fluid and particle-in-cell simulations of the boundary region are compared to the experimental measurements. We find that, in contrast to the classical collisionless Chodura model, collisional effects between the ions and the non-flowing neutral population are essential to quantitatively predict the observed ion drift velocities. No momentum coupling between ions and neutrals, separable from noise and other effects, is observed in either signal. Here, we discuss several explanations and implications of this observation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗