Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “impact study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Modeling of delamination damage evolution in laminated composites subjected to low velocity impact

This study examines the delamination evolution, under quasi-static conditions, of laminated polymeric composites with mechanically nonlinear resin rich interfaces. The constitutive behavior of the interface is represented by two models developed by Needleman and Tvegaard. These models assumed that the interfacial tractions, a function of only the interfacial displacement, will behave similarly to the interatomic forces generated during the interatomic seperation. The interface material's parameters control the load at which the delamination growth initiates and the final delamination size. A wide range of damage accumulation responses have been obtained by varying the model parameters. These results show that Tvergaard's model has been found to be better suited of the two models in predicting damage evolution for the configurations examined.

Lo, David C.↗
NASA NTRS2015

Ice Particle Impacts on a Flat Plate

An experimental study was conducted at the Ballistic Laboratory of NASA Glenn Research Center to study the impact of ice particles on a stationary flat surface target set at 45 degrees with respect to the direction of motion of the impinging particle (Figure 1). The experiment is part of NASA efforts to study the physics involved in engine power-loss events due to ice-crystal ingestion and ice accretion formation inside engines. These events can occur when aircraft encounter high-altitude convective weather.

ice particle↗
NASA NTRS1986

Deformation and damage of composite plates under impact loading

Transient deformation and damage were studied in impacted graphite/epoxy plates. The plates were 8-ply and 16-ply quasi-isotropic laminates clamped around a 12.7 cm diameter circumference. They were instrumented with surface and embedded strain gages and loaded by a 202 gr mass dropped from a height of 1.8 m. The load history and imparted energy were obtained by means of an accelerometer attached to the impactor. Transient strains at various locations through the thickness and at various distances from the loading point were obtained. The characteristic features of the strain records are associated with specific failure modes in the laminate. The deformation history was also correlated with the induced damage as detected by X-radiography and ultrasonics. Impact damage is more extensive in the thicker laminate. Damage takes the form of delaminated strips parallel to the fiber direction in each ply and increasing in length from top to bottom.

Daniel, I. M.↗
NASA NTRS2005

Further Geophysical Studies of the Haughton Impact Structure

The approximately 23 Ma Haughton impact structure, located at 75 deg 23 min N, 89 deg 39 min W in the Canadian Arctic, on Devon Island, Nunavut, Canada is a well-preserved impact structure with an original rim diameter estimated at about 23 - 24 km. Past studies, in the 1980s, did an initial survey of the Haughton structure, looking at its surface units, exposures, map surface geology, topographic and initial surveys of gravity and magnetic fields in profiles across the impact structure. A topological outer ring and the lack of a well-defined central peak was cited as evidence that Haughton was a multi-ring structure. However other authors consider it more likely that the Haughton structure is a central-peak basin with simply a limited extent, and/or full peak features having been removed through glaciations and subsequent years. The impact structure is located in approximately 2 km thickness of carbonate material on top of a gneissic basement. The impact structure itself can be described in terms of uplifted and moved blocks of altered gneissic and carbonate material with areas in the center of the crater covered with impact carbonate melts and/or reworked impact breccias. Additional information is included in the original extended abstract.

Glass, B. J.↗
NASA NTRS1985

Origin of the atmosphere and hydrosphere of the terrestrial planets

An early thermal evolution of a planet growing by planetesimal impacts was studied. An evolution of an impact induced atmosphere was considered. It is known that the surface of a growing planet is heated due to the blanketing effect of the atmosphere and exceeds the melting temperature, which means that the surface of a growing planet was entirely covered by a magma ocean. The amount of water in a proto-atmosphere is influenced by the formation of a magma ocean. It is suggested the solubility of water in silicate melt controls the water content in a proto-atmsphere. It is noted that irrespective of difference in initial water content of planetesimals the final water content in the atmosphere becomes almost constant and is about 10 to the 21st power kg which is almost identical with the present amount of the ocean. It is also shown that the water in a proto-atmosphere can be liquid for the Earth and becomes to be an ocean but this does not happen on Venus.

Matsui, T.↗
NASA NTRS2011

Forecasting Lake-Effect Precipitation in the Great Lakes Region Using NASA Enhanced-Satellite Data

Lake-effect precipitation is common in the Great Lakes region, particularly during the late fall and winter. The synoptic processes of lake-effect precipitation are well understood by operational forecasters, but individual forecast events still present a challenge. Locally run, high resolution models can assist the forecaster in identifying the onset and duration of precipitation, but model results are sensitive to initial conditions, particularly the assumed surface temperature of the Great Lakes. The NASA Short-term Prediction Research and Transition (SPoRT) Center has created a Great Lakes Surface Temperature (GLST) composite, which uses infrared estimates of water temperatures obtained from the MODIS instrument aboard the Aqua and Terra satellites, other coarser resolution infrared data when MODIS is not available, and ice cover maps produced by the NOAA Great Lakes Environmental Research Lab (GLERL). This product has been implemented into the Weather Research and Forecast (WRF) model Environmental Modeling System (WRF-EMS), used within forecast offices to run local, high resolution forecasts. The sensitivity of the model forecast to the GLST product was analyzed with a case study of the Lake Effect Storm Echinacea, which produced 10 to 12 inches of snowfall downwind of Lake Erie, and 8 to 18 inches downwind of Lake Ontario from 27-29 January 2010. This research compares a forecast using the default Great Lakes surface temperatures from the Real Time Global sea surface temperature (RTG SST), in the WRF-EMS model to the enhanced NASA SPoRT GLST product to study forecast impacts. Results from this case study show that the SPoRT GLST contained less ice cover over Lake Erie and generally cooler water temperatures over Lakes Erie and Ontario. Latent and sensible heat fluxes over Lake Ontario were decreased in the GLST product. The GLST product decreased the quantitative precipitation forecast (QPF), which can be correlated to the decrease in temperatures and heat fluxes. A slight increase in precipitation coverage was noted over Lake Erie due to a decrease in ice cover. Both the RTG SST and the GLST products predicted the precipitation south of the actual location of precipitation. This single case study is the first part of an examination to determine how MODIS data can be applied to improve model forecasts in the Great Lakes region.

Cipullo, Michelle↗
NASA NTRS2001

Lower Stratospheric Temperature Differences Between Meteorological Analyses in two cold Arctic Winters and their Impact on Polar Processing Studies

A quantitative intercomparison of six meteorological analyses is presented for the cold 1999-2000 and 1995-1996 Arctic winters. The impacts of using different analyzed temperatures in calculations of polar stratospheric cloud (PSC) formation potential, and of different winds in idealized trajectory-based temperature histories, are substantial. The area with temperatures below a PSC formation threshold commonly varies by approximately 25% among the analyses, with differences of over 50% at some times/locations. Freie University at Berlin analyses are often colder than others at T is less than or approximately 205 K. Biases between analyses vary from year to year; in January 2000. U.K. Met Office analyses were coldest and National Centers for Environmental Prediction (NCEP) analyses warmest. while NCEP analyses were usually coldest in 1995-1996 and Met Office or NCEP[National Center for Atmospheric Research Reanalysis (REAN) warmest. European Centre for Medium Range Weather Forecasting (ECMWF) temperatures agreed better with other analyses in 1999-2000, after improvements in the assimilation model. than in 1995-1996. Case-studies of temperature histories show substantial differences using Met Office, NCEP, REAN and NASA Data Assimilation Office (DAO) analyses. In January 2000 (when a large cold region was centered in the polar vortex), qualitatively similar results were obtained for all analyses. However, in February 2000 (a much warmer period) and in January and February 1996 (comparably cold to January 2000 but with large cold regions near the polar vortex edge), distributions of "potential PSC lifetimes" and total time spent below a PSC formation threshold varied significantly among the analyses. Largest peaks in "PSC lifetime" distributions in January 2000 were at 4-6 and 11-14 days. while in the 1996 periods, they were at 1-3 days. Thus different meteorological conditions in comparably cold winters had a large impact on expectations for PSC formation and on the discrepancies between different meteorological analyses. Met Office. NCEP, REAN, ECMWF and DAO analyses are commonly used for trajectory calculations and in chemical transport models; the choice of which analysis to use can strongly influence the results of such studies.

Manney, Gloria L.↗
NASA NTRS2000

Understanding oblique impacts from experiments, observations, and modeling

Natural impacts in which the projectile strikes the target vertically are virtually nonexistent. Nevertheless, our inherent drive to simplify nature often causes us to suppose most impacts are nearly vertical. Recent theoretical, observational, and experimental work is improving this situation, but even with the current wealth of studies on impact cratering, the effect of impact angle on the final crater is not well understood. Although craters' rims may appear circular down to low impact angles, the distribution of ejecta around the crater is more sensitive to the angle of impact and currently serves as the best guide to obliquity of impacts. Experimental studies established that crater dimensions depend only on the vertical component of the impact velocity. The shock wave generated by the impact weakens with decreasing impact angle. As a result, melting and vaporization depend on impact angle; however, these processes do not seem to depend on the vertical component of the velocity alone. Finally, obliquity influences the fate of the projectile: in particular, the amount and velocity of ricochet are a strong function of impact angle.

NASA Discipline Exobiology↗
NASA NTRS2002

Prebiotic Processing induced by Comet and Meteor Impact

In their study of organic synthesis from impact shocks using the laser-induced-plasma (LIP) technique, McKay and Borucki(l) found that organic synthesis preferentially occurred in a reducing gas mixture rich in methane, and not in a mixture rich in carbon dioxide. This result means chemical models based on the thermodynamical equilibrium approach do not apply to shock chemistry. In this study, we employ the technique of reacting flow, i.e., chemical kinetics in a fluid flow, to simulate the chemistry occurring in LIP and in the wake region from comet or meteor impact. Three different air compositions have been used: (1) 1/3 CO2 and 2/3 H2, (2) pure CH4, and (3) 1/4 CH4, 1/4 CO2, and 1/2 H2O. The stoichiometric ratio of gas mixtures (1) and (3) are kept the same. For (1) we obtain equal mole fractions of CO and H2O as the major products and for (2) C2H2 is the major product. In both cases our results are in agreement with Ref. (1). For (3) we find an interesting case where the nature of chemicals produced to be critically dependent on the flowfield temperature. At the higher temperature part of the wake region, CO and H2O are the dominant products, whereas in the cooler region C2H2 is the dominant product. Further studies of these reactions, as well as for the gas mixture including N2, are being pursued.

Dateo, Christopher E.↗
NASA NTRS1972

Artificial lunar impact craters: Four new identifications, part I

The Apollo 16 panoramic camera photographed the impact locations of the Ranger 7 and 9 spacecraft and the S-4B stage of the Apollo 14 Saturn launch vehicle. Identification of the Ranger craters was very simple because each photographed its target point before impact. Identification of the S-4B impact crater proved to be a simple matter because the impact location, as derived from earth-based tracking, displayed a prominent and unique system of mixed light and dark rays. By using the criterion of a dark ray pattern, a reexamination of the Apollo 14 500 mm Hasselblad sequence taken of the Apollo 13 S-4B impact area was made. This examination quickly led to the discovery of the ray system and the impact crater. The study of artificial lunar impact craters, ejecta blankets, and ray systems provides the long-needed link between the various experimental terrestrial impact and explosion craters, and the naturally occurring impact craters on the moon. This elementary study shows that lunar impact crater diameters are closely predictable from a knowledge of the energies involved, at least in the size range considered, and suggests that parameters, such as velocity, may have a profound effect on crater morphology and ejecta blanket albedo.

Whitaker, E. A.↗
NASA NTRS2010

Micrometeoroid Impacts and Optical Surface Scatter in Space Environment

This presentation will discuss the results of an attempt to use laboratory test data and empirically derived models to quantify the degree of surface damage and associated light scattering that might be expected from hypervelocity particle impacts in space environment. Micrometeoroid sizes are predicted to be predominantly in the mass range 10(exp -5) g or less, with most having diameters near 1 micrometer, but some larger than 120 micrometers, with velocities near 20 km/s. In a laboratory test, latex (p = 1.1 g/cu cm) and iron (7.9 g/cu cm) particles with sizes ranging from 0.75 micrometer to 1.60 micrometer and with velocities ranging from 2.0 km/s to 18.5 km/s, were shot at a dielectric coated gold mirror. Scanning electron and atomic force microscopy were used to measure crater dimensions that were then associated with particle impact energies. These data were then fitted to empirical models derived from solar cell and other spacecraft surface components returned from orbit, as well as studies of impact craters studied on glassy materials returned from the lunar surface, to establish a link between particle energy and impact crater dimension. Published estimates of the Martian and Saturnian meteoroid environments were used as the sources of particle flux estimates. From these data, an estimate of total expected damaged area was computed and this result produced an estimate of expected surface scatter from the modeled environment.

Heaney, James B.↗
NASA NTRS2010

Micrometeoroid Impacts and Optical Scatter in Space Environment

This paper discusses the results of an attempt to use laboratory test data and empirically derived models to quantify the degree of surface damage and associated light scattering that might be expected from hypervelocity particle impacts in space environment. Published descriptions of the interplanetary dust environment were used as the sources of particle mass, size, and velocity estimates. Micrometeoroid sizes are predicted to be predominantly in the mass range 10(exp -5) g or less, with most having diameters near 1 micrometer, but some larger than I20 micrometers, with velocities near 20 kilometers per second. In a laboratory test, latex ( p = 1.1. grams per cubic centimeter) and iron (7.9 grams per cubic centimeter) particles with diameters ranging from 0.75 micrometers to 1.60 micrometers and with velocities ranging from 2.0 kilometers per second to 18.5 kilometers per second, were shot at a Be substrate mirror that had a dielectric coated gold reflecting surface. Scanning electron and atomic force microscopy were used to measure crater dimensions that were then associated with particle impact energies. These data were then fitted to empirical models derived from solar cell and other spacecraft surface components returned from orbit, as well as studies of impact craters studied on glassy materials returned from the lunar surface, to establish a link between particle energy and impact crater dimension. From these data, an estimate of total expected damaged area was computed and this result produced an estimate of expected surface scatter from the modeled environment.

Heaney, James B.↗
NASA NTRS2024

Impact Response of Thermoplastic Composites – Experiments and Modeling

This study investigates the impact response of thermoplastic composite materials. The material system under consideration is a carbon fiber reinforced low melt semi-crystalline resin TC1225 LMPAEK reinforced with T700G (T700/LMPAEK ). Several High Energy Dynamic Impact (HEDI) tests were performed wherein an aluminum projectile impacted T700/LMPAEK panels at different velocities. In the impact experiment studied herein, the projectile impacted the T700/LMAPEK panel at 73.2 m/s and rebounded. The ensuing damage to the T700/LMPAEK panel was characterized via ultrasonic C-scans, visualizing damage modes including matrix cracking and delaminations. Since the projectile rebounded, the fiber breakage damage mode was not evident. The impact event was modeled using a combined continuum damage mechanics and cohesive zone analysis approach with the commercially available hydrocode LS-DYNA®. The dynamic deformation and damage of the continuum, i.e., the plies in the T700/LMPAEK laminate, was modeled using a Deformation Gradient Decomposition (DGD) material model, i.e., MAT299 available within LS-DYNA. The interlaminar regions were treated as zero-thickness cohesive zones, wherein the dynamic delamination mechanics was modeled using a traction-separation formulation. Mixed-mode delamination growth was captured using the Benzegaggh-Kenane (B-K) traction-separation interpolation law. Strain-rate sensitivity of interlaminar fracture toughness was included using approximations based on published literature. The outcomes of the modeling effort are discussed herein which demonstrate good correlations with test data regarding panel deflection, panel-projectile interactions, damage modes and damage extent.

Impact modeling↗
NASA NTRS1999

Impacts of Large-Scale Circulation on Convection: A 2-D Cloud Resolving Model Study

Studies of impacts of large-scale circulation on convection, and the roles of convection in heat and water balances over tropical region are fundamentally important for understanding global climate changes. Heat and water budgets over warm pool (SST=29.5 C) and cold pool (SST=26 C) were analyzed based on simulations of the two-dimensional cloud resolving model. Here the sensitivity of heat and water budgets to different sizes of warm and cold pools is examined.

Li, X↗
NASA NTRS2020

Spatial U-Pb Age Distribution in Shock-Recrystallized Zircon – A Case Study from the Rochechouart Impact Structure, France

Age determination of impact structures via the zircon U–Pb system remains challenging and often ambiguous due to highly variable effects of shock metamorphism on U-Pb geochronology. It is, therefore, crucial to link the observed zircon microtextures, including their temperature and pressure conditions associated with their formation, directly to the U–Pb ages preserved. Here, we analyzed three recrystallized zircon grains and one plastically deformed zircon crystal from the medium-sized Rochechouart impact structure in the northwestern Massif Central of France. For the Rochechouart impact structure the impact age (206.92 ± 0.32 Ma [40Ar/39Ar]) as well as the 2 tectono-themal history is well established making this study site ideal to test concepts about U-Pb systematics in shocked zircon and to differentiate between shock-driven age resetting and preimpact crystallization and metamorphic overprinting. Zircon microstructures were studied using scanning electron imaging, cathodoluminescence imaging, and electron backscatter diffraction (EBSD) mapping. Further, we conducted U–Pb Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) depth-profiling analysis, allowing us to interpret the resultant age data in discrete steps with increasing ablation time/depth. The U–Pb depth profiling data demonstrate that plastically strained grains are incompletely reset and preserve rim and interior age domains reflecting typical pre-impact (pre-Variscan and Variscan) regional tectonic ages. Our results also reveal that the granular crystals encountered contain microstructural evidence for “former reidite in granular neoblastic” (FRIGN) zircon, reflecting both high-pressure (⩾30GPa) and high temperature (⩾1200℃) conditions. This signifies that FRIGN zircon is now known from an additional, medium sized, impact structure further supporting the hypothesis that this impact induced microstructure is commonly preserved. In addition, FRIGN zircon has a high potential to preserve completely impact-reset crystal domains (~204 to 207 Ma) that can be identified by our combined analytical approach of U–Pb depth profiling and EBSD mapping, and thus are suitable for determining reliable impact ages

U-Pb depth profiling↗
NASA NTRS1992

Variation in multiring basic structures as a function of impact angle

Previous studies have demonstrated that the impact process in the laboratory varies as a function of impact angle. This variation is attributed to changes in energy partitioning and projectile failure during the impact and, in simple craters, produces a sequence of progressively smaller and more asymmetric crater forms as impact angle decreases from approximately 20 degrees. Variations in impact angle can produce differences in the appearance of multiring impact basins. Comparisons of Orientale to the more oblique impact structure at Crisium also suggests that these differences primarily reflect the degree of cavity collapse. The relative changes in massif ring topography, basin scarp relief, and the distribution of peripheral mare units are consistent with a reduction in degree of cavity collapse with decreasing impact angle. The prominent uprange basin scarps and the restriction of tectonically derived peripheral mare units along uprange ring structures also may indicate an uprange enhancement of failure during cavity collapse. Finally, although basin ring faults appear to be preferred pathways for mare volcanism, fault-controlled peripheral mare volcanism occurs most readily uprange of an oblique impact; elsewhere such volcanism apparently requires superposition of an impact structure on the ring fault.

Wichman, R. W.↗