SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Carbon-supported Ni–Mo composites catalyze alkaline hydrogen evolution and oxidation with negligible onset overpotential. Electrolyzers using Ni–Mo cathodes perform comparably to Pt–Ru cathodes, but oxidative instability limits fuel cell operation.
The electrochemical reduction of CO 2 into valuable products at mild reaction conditions and using cheap renewable electrical energy are goals to sustain a low-carbon economy. Among the various CO 2 reduction reaction products, formic acid (FA) has received significant attention because of its low Gibbs free energy input requirement and the simple reduction reaction involving the transfer of 2 electrons and 2 protons. In this work, a copper-doped tin oxide catalyst supported on a mesoporous carbon xerogel was shown to enhance the electrochemical reduction of CO 2 to formate in a bicarbonate solution coupled with CO 2 . We observed that the synergistic SnCu oxides enhance the selectivity toward formate from 58.6% for Sn oxide and 28.7% for Cu oxide to over 71.2% for the SnCu oxides. The observed rate of formate production with SnCu oxide was 2.8 times higher compared to the rate of Cu oxide and about 1.5 times higher than with the Sn oxide catalyst. Our results reveal that selectivity for formate comes partly from the electrolysis of the bicarbonate solution and partly from continuous CO 2 gas purged into the solution. The contribution from the electrolysis of bicarbonate solution ranges from 15% to 40% when the concentration of bicarbonate solution ranges from 100 mM to 1 M. Chronoamperometric measurements for stability revealed that Cu oxide and Sn oxide showed stable current density for less than 30 h while under the same conditions, the stable current density was observed for more than 50 h with SnCu oxide catalyst. Additionally, the selectivity toward formate increased by 6% when the reactor pressure was increased from near ambient pressure to 4 psig. Our lab-scale electrochemical cell with SnCu oxide supported on the mesoporous carbon xerogel enhances the CO 2 solubility, minimizes the precipitation of salts that can degrade the catalytic performance, and suppresses the competitive hydrogen evolution reaction, demonstrating the feasibility of using our catalyst and system for the electrochemical conversion of CO 2 into formate with high selectivity, productivity, and stability. Furthermore, this could have significant implications for the mitigation of CO 2 emissions and the development of a sustainable chemical industry.
Combined computational and experimental approaches were used to evaluate defective 2H-MoS 2 nanosheets for their activity and selectivity for hydrogen evolution reaction (HER) and nitrogen reduction reaction (NRR). Density functional theory calculations were used to understand the relationship between HER and NRR activity on the ideal basal MoS 2 plane, seven grain-boundaries, ten single-/few-atom vacancies and anti-sites, and zigzag and armchair edge sites. The results confirm that 2H-MoS 2 should contain several defects with high activity for HER: armchair and zigzag edges, VS vacancy, MoS 2 anti-site, and S-S and Mo-Mo grain boundaries. Considering Gibbs free energy change for all the steps in the NRR mechanism and kinetic barriers for a key NRR step, we have found that activation of perspective NRR selective sites in 2H-MoS 2 , namely V MoS6 and clusters of S-vacancies, would require large overpotential, conditions at which HER dominates. The DFT conclusions are supported by the electrochemical studies of NRR activity and selectivity under aqueous conditions, which show an increase in NRR activity but a decrease in Faradaic efficiency as applied cell potential becomes more negative. The results of this work therefore highlight the challenges in activating natural 2H-MoS 2 for NRR, which would require additional material engineering or reaction condition optimization as a way to suppress HER, decrease the NRR overpotential or preferentially both.
Explore the source record for details and available documents.
Nuclear fission produces 400 GWe which represents 11% of the global electricity output. Uranium is the essential element as both fission fuel and radioactive waste. Therefore, the recovery of uranium is of great importance. In this study, an in situ electrolytic deposition method to extract uranium from aqueous solution is reported. A functionalized reduced graphene oxide foam (3D-FrGOF) is used as the working electrode, which acts as both a hydrogen evolution reaction catalyst and a uranium deposition substrate. The specific electrolytic deposition capacity for U(VI) ions with the 3D-FrGOF is 4560 mg g –1 without reaching saturation, and the Coulombic efficiency can reach 54%. Moreover, reduction of the uranium concentration in spiked seawater from 3 ppm to 19.9 ppb is achieved, which is lower than the US Environmental Protection Agency uranium limits for drinking water (30 ppb). Furthermore, the collection electrode can be efficiently regenerated and recycled at least nine times without much efficiency fading, by ejecting into 2000 ppm concentrated uranium solution in a second bath with reverse voltage bias. All these findings open new opportunities in using free-standing 3D-FrGOF electrode as an advanced separation technique for water treatment.
Iron is a promising candidate for a cost-effective anode for large-scale energy storage systems due to its natural abundance and well-established mass production. Recently, Fe-ion batteries (FeIBs) that use ferrous ions as the charge carrier have emerged as a potential storage solution. The electrolytes in FeIBs are necessarily acidic to render the ferrous ions more anodically stable, allowing a wide operation voltage window. However, the iron anode suffers severe hydrogen evolution reaction with a low Coulombic efficiency (CE) in an acidic environment, shortening the battery cycle life. Herein, a hybrid aqueous electrolyte that forms a solid-electrolyte interphase (SEI) layer on the Fe anode surface is introduced. The electrolyte mainly comprises FeCl 2 and ZnCl 2 as cosalts, where the Zn-Cl anionic complex species of the concentrated ZnCl 2 allows dimethyl carbonate (DMC) to be miscible with the aqueous ferrous electrolyte. SEI derived from DMC's decomposition passivates the iron surface, which leads to an average CE of 98.3% and much-improved cycling stability. As a result, this advancement shows the promise of efficient and durable FeIBs.
Abstract Layered MoO 3 represents a promising cathode for aqueous rechargeable Zn‐ion batteries, but the implementation of this material is limited due to the low conductivity and poor structural stability. A 30 m ZnCl 2 water‐in‐salt electrolyte (WISE) is introduced to a MoO 3 nanobelt cathode for the first time, significantly increasing the stability of MoO 3 cathodes compared to those in 3 m ZnSO 4 and 3 m ZnCl 2 . The Zn/MoO 3 cell in WISE unambiguously demonstrate significantly improved rate performance delivering 349, 253, and 222 mAh g −1 at 100, 500, and 1000 mA g −1 , denoting a 12× capacity increase of those achieved in 3 m electrolytes at 1000 mA g −1 . A capacity retention rate of 73% is achieved after (dis)charging at 100 mA g −1 for 100 cycles, and no obvious capacity fading is observed at higher current densities of 500 mA g −1 and 2 A g −1 . Specifically, the data suggest that the drastic fading in 3 m electrolytes can be attributed to the parasitic surface deposits on Zn originated from Mo dissolution and H 2 formation due to Zn corrosion and hydrogen evolution reaction, which are significantly suppressed in the WISE. The direct visualization of these side reactions is achieved for the first time in the Zn‐MoO 3 system, using an in situ optoelectrochemical measurement.
MXene-transition metal dichalcogenide (TMD) heterostructures are synthesized through a one-step heat treatment of Nb 2 C and Nb 4 C 3 . These MXenes are used without delamination or any pre-treatment. Heat treatments accomplish the sacrificial transformation of these MXenes into TMD (NbS 2 ) at 700 and 900 °C under H 2 S. This work investigates, for the first time, the role of starting MXene phase in the derivative morphology. It is shown that while treatment of Nb 2 C at 700 °C leads to the formation of pillar-like structures on the parent MXene, Nb 4 C 3 produces nano-mosaic layered NbS 2 . At 900 °C, both MXene phases, of the same transition metal, fully convert into nanomosaic layered NbS 2 preserving the parent MXene’s layered morphology. When tested as electrodes for hydrogen evolution reaction, Nb 4 C 3 -derived hybrids show better performance than Nb 2 C derivatives. The Nb 4 C 3 -derived heterostructure exhibits a low overpotential of 198 mV at 10 mA cm -2 and a Tafel slope of 122 mV dec -1 , with good cycling stability in an acidic electrolyte
A layered MoO 3 material with large interlayer spacing represents a promising cathode for aqueous rechargeable Zn-ion batteries (ARZIBs), but the implementation of this material is limited due to the intrinsically low conductivity and poor structural stability. A 30 m ZnCl 2 water-in-salt electrolyte (WISE) was introduced to a MoO 3 nanobelt cathode for the first time, significantly increasing the stability of MoO 3 cathodes compared to those in 3 M ZnSO 4 and 3 M ZnCl2 electrolyte. The Zn/MoO 3 cell in WISE unambiguously demonstrated significantly improved rate performance delivering 349, 253, and 222 mAh/g at 100, 500, and 1000 mA/g, denoting a 2×, and 12× capacity increase of those achieved in 3 M electrolytes at 500 and 1000 mA/g, respectively. A capacity retention rate of 73% was achieved after (dis)charging at 100 mA/g for 100 cycles, and no obvious capacity fading was observed at higher current densities of 500 mA/g and 2A/g. A compilation of structural and morphological characterization was systematically performed to provide insight into the mechanisms of the improved performance in ZnCl 2 WISE for the MoO3 cathode materials. Specifically, our data collectively suggested that the drastic fading in 3M electrolytes can be attributed to the parasitic surface deposits on Zn originated from Mo dissolution and H 2 formation due to Zn corrosion and hydrogen evolution reaction (HER), which were significantly suppressed in the ZnCl 2 WISE. The direct visualization of these side reactions was achieved for the first time in the Zn-MoO 3 system, using an in situ optoelectrochemical measurement.
Herein charge storage and transport properties are elucidated and cell degradation mechanisms of rechargeable aqueous Zn|alpha-MoO 3 batteries in three electrolyte systems (3 m ZnSO 4 , 3 m ZnCl 2 , and 30 m ZnCl 2 [12.5 m] water-in-salt (WIS)) are distinguished by a combination of in situ X-ray diffraction (XRD), in situ X-ray absorption spectroscopy (XAS), operando optoelectrochemistry, and operando energy dispersive X-ray diffraction (EDXRD). In conventional concentration 3 m electrolytes, in situ XRD and XAS, as well as ex situ scanning transmission electron microscopy data collectively support Zn 2+ as the primary charge carrier. In addition, these systems are susceptible to cathode dissolution, Zn corrosion coupled with the hydrogen evolution reaction, and the resultant formation of basic zinc salt phases. The multi-modal in situ and operando experimental analyses validate facile H+ intercalation and extraction in concentrated 30 m ZnCl 2 WIS electrolyte. Via operando EDXRD, reaction front and charge transport limitation during discharge and charge in the viscous WIS electrolyte are spatially tracked. Here this work provides new insight into the stability and degradation mechanisms of aqueous zinc batteries during static storage and upon dynamic cycling, and highlights the utility of in situ and operando techniques in understanding the superior stability of WIS electrolytes.
Ru 3 Sn 7 is experimentally demonstrated as an efficient catalyst, with potential utilization of topological surface states for hydrogen evolution reaction. Despite its promising catalytic performance, the topological nature of Ru 3 Sn 7 remains uncertain. Particularly, the bulk-boundary correspondence has not yet been established, hence hindering a rigorous justification of its topologically-protected surface states. In this work, the bulk topology of Ru 3 Sn 7 is detailed using first-principles calculations and the topological quantum chemistry formalism. Ru3Sn7 turns out to be an enforced semimetal possessing symmetry-protected crossings within a set of bands near the Fermi level, which are enforced and prescribed by the violations of symmetry-prescribed compatibility relations. Moreover, the surface states and the associated origin from the same set of entangled bands are identified, thereby establishing the bulk-boundary correspondence. To evaluate the effects of chemical modifications, the response of topological surface states to various surface terminations, stoichiometry, and oxidation is examined. The surface structures are globally optimized, and the phase diagrams for various experimental conditions are built. It is shown that, due to changes in the local chemical environment, the original surface states are significantly altered. Modified surface bands can be observed near the Fermi level on surface terminations that preserve the C 4v symmetry.
Designing electrocatalysts that excel in hydrogen and oxygen electrochemistry is crucial for sustainable hydrogen generation through electrochemical water splitting. This study presents a novel tricomponent catalyst composed of an alginate hydrogel (AL) infused with single-walled carbon nanotubes (CNTs) and copper oxide (CuO) nanoparticles. The catalyst exhibits benchmark-close bifunctional activity toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) under alkaline conditions. The aerophobic nature of the AL-gel facilitates superior bubble release from the electrode, while the inclusion of CNTs mitigates charge transfer resistance. Moreover, heterojunctions of CuO and CNTs create unique interfacial active sites, culminating in high electrocatalytic water-splitting activity. The structural rigidity of the composite permits its use as self-standing electrodes (SSE) without using substrates or binders, enabling a direct evaluation of its activity. The composite electrode demonstrates exceptional electrocatalytic HER activity in an alkaline solution, with onset potentials of 93 mV and moderate OER activity with an onset of 155 mV. Furthermore, a water electrolysis cell featuring the bifunctional SSE exhibits an open circuit voltage of 1.85 V at 100 mA.cm −2 , and only 8% efficiency loss after 100 h marking this a significant stride in developing self-standing nonprecious electrocatalysts with impressive catalytic performance.
Selective dechlorination of organic chlorides over hydrogen evolution reaction (HER) remains a challenge because of their coincidence. Nanoscale zerovalent iron (nFe 0 ) draws a promising picture of in situ groundwater dechlorination, but its indiscriminate reactivity limits the application. Here, nFe 0 crystals are designed with electron shuttles and improved hydrophobic nature based on elemental chalcophile-siderophile characteristics, where chalcophile-siderophile S served as a bridge to allow impregnating nFe 0 crystals with weakly siderophile and strongly chalcophile Cu. Even impregnations of lattice chalcophile-siderophile elements into the nFe 0 crystals are evidenced at both intraparticle and individual-particle levels. The modulated Fe microenvironment and physicochemical properties broke the reactivity-selectivity-longevity-stability trade-off. Compared to nFe 0 , superhydrophobic Cu─S─nFe 0 with lattice expansion promoted dechlorination by 20-fold but inhibited HER by 150-fold, utilizing ≈80–100% electrons from the Fe 0 reservoir. This work demonstrates the concept of engineering nFe 0 lattice with tunable structure-property relationships, mimicking reductive dehalogenases by selectively interacting with halocarbon functional groups for efficient dehalogenation and sustainable groundwater remediation.
Single-atom catalysts (SAC) can boost the intrinsic catalytic activity of hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). However, the challenge remains due to the complex synthesis process and insufficient stability. A sustainable approach is applied to synthesizing SACs through laser irradiation and gaining mesoporous graphene oxide (MGO). The surface dangling bonds of nitrogen-doped MGO (NMGO) extract metal atoms species from Co or Fe metal foams and convert them to SAC via an appropriate synthesis approach. Notably, the Co-NMGO electrocatalyst requires low potentials of 146 mV to convey a current density of 10 mA cm -2 towards HER. Similarly, the Fe-NMGO electrocatalyst offers an onset of 0.79 V towards ORR in acidic solution. The individual metal atoms are confirmed via aberration-corrected scanning transmission electron microscopy, and X-ray absorption near-edge structure and extended X-ray absorption fine structure. Density functional theory calculations by applying the grand canonical potential kinetics model revealed that Co-NMGO shows the optimum free reaction energy of -0.17 eV at -0.1 V for HER, and Fe-NMGO has less limiting potential than that of Co-NMGO for ORR case. Furthermore, this work opens a new approach towards the synthesis of SAC and its mechanistic understandings.
Electroreduction of CO 2 to value-added products is a promising strategy for CO 2 reuse, where copper has a unique ability to produce oxygenates and C 2+ products. Unfortunately, the electronic factors making copper so unique are unknown, which limits the ability to design improved catalysts. By combining in situ surface-sensitive X-ray resonant photoelectron spectroscopy with density functional theory calculations, the complex electronic structure of copper is uncovered during the electrocatalytic reduction of CO 2 . It is found that the pseudocapacitive charging of copper, produced by the incorporation of protons and electrons into the subsurface, facilitates the activation of CO 2 , while simultaneously increasing the barrier for H-H coupling. The net result is that cathodic pseudocapacitive charge suppresses the hydrogen evolution reaction and promotes the production of hydrocarbons and oxygenated products on copper. These results represent a new paradigm in the understanding of CO 2 reduction, highlighting the key role of pseudocapacitive charge in the reaction.
Abstract Electrochemical CO 2 reduction (CO 2 R) at low pH is desired for high CO 2 utilization; the competing hydrogen evolution reaction (HER) remains a challenge. High alkali cation concentration at a high operating current density has recently been used to promote electrochemical CO 2 R at low pH. Herein we report an alternative approach to selective CO 2 R (>70 % Faradaic efficiency for C 2+ products, FE C2+ ) at low pH (pH 2; H 3 PO 4 /KH 2 PO 4 ) and low potassium concentration ([K + ]=0.1 M) using organic film‐modified polycrystalline copper (Modified‐Cu). Such an electrode effectively mitigates HER due to attenuated proton transport. Modified‐Cu still achieves high FE C2+ (45 % with Cu foil /55 % with Cu GDE) under 1.0 M H 3 PO 4 (pH≈1) at low [K + ] (0.1 M), even at low operating current, conditions where HER can otherwise dominate.
Abstract We report the size‐dependent activity and stability of supported Pt 1,4,7,8 for electrocatalytic hydrogen evolution reaction, and show that clusters outperform polycrystalline Pt in activity, with size‐dependent stability. To understand the size effects, we use DFT calculations to study the structural fluxionality under varying potentials. We show that the clusters can reshape under H coverage and populate an ensemble of states with diverse stoichiometry, structure, and thus reactivity. Both experiment and theory suggest that electrocatalytic species are hydridic states of the clusters (≈2 H/Pt). An ensemble‐based kinetic model reproduces the experimental activity trend and reveals the role of metastable states. The stability trend is rationalized by chemical bonding analysis. Our joint study demonstrates the potential‐ and adsorbate‐coverage‐dependent fluxionality of subnano clusters of different sizes and offers a systematic modeling strategy to tackle the complexities.
Abstract Efficiently transforming CO 2 into renewable energy sources is crucial for decarbonization efforts. Formic acid (HCOOH) holds great promise as a hydrogen storage compound due to its high hydrogen density, non‐toxicity, and stability under ambient conditions. However, the electrochemical reduction of CO 2 (CO 2 RR) on conventional carbon black‐supported metal catalysts faces challenges such as low stability through dissolution and agglomeration, as well as suffering from high overpotentials and the necessity to overcome the competitive hydrogen evolution reaction (HER). In this study, we modify the physical/chemical properties of metal surfaces by depositing metal monolayers on graphene (M/G) to create highly active and stable electrocatalysts. Strong covalent bonding between graphene and metal is induced by the hybridization of sp and d orbitals, especially the sharp , , and orbitals of metals near the Fermi level, playing a decisive role. Moreover, charge polarization on graphene in M/G enables the deposition of another thin metallic film, forming metal/graphene/metal (M/G/M) structures. Finally, evaluating overpotentials required for CO 2 reduction to HCOOH, CO, and HER, we find that Pd/G, Pt/G/Ag, and Pt/G/Au exhibit excellent activity and selectivity toward HCOOH production. Our novel 2D hybrid catalyst design methodology may offer insights into enhanced electrochemical reactions through the electronic mixing of metal and other p‐block elements.