Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hardening”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Age hardening and creep resistance of cast Al–Cu alloy modified by praseodymium

The effects of praseodymium on age hardening behavior and creep resistance of cast Al–Cu alloy were investigated. The results indicated that praseodymium facilitated the formation of the θ′ precipitates during the age process and improved the hardness of the Al–Cu alloy. Besides, praseodymium resulted in the formation of the Al{sub 11}Pr{sub 3} phase in the grain boundaries and among the dendrites of the modified alloy. Because of the good thermal stability of Al{sub 11}Pr{sub 3} phase, it inhibits grain boundary migration and dislocation movement during the creep process, which contributes to the improvement in the creep resistance of the modified alloy at elevated temperatures. - Highlights: • Pr addition enhances the hardness and creep resistance of the Al–Cu alloy. • Pr addition facilitates the formation of the θ′ precipitates. • Pr addition results in the formation of the Al11Pr3 phase in the Al–Cu alloy.

36 MATERIALS SCIENCE↗

Initial precipitation and hardening mechanism during non-isothermal aging in an Al–Mg–Si–Cu 6005A alloy

The characterization of precipitation and hardening mechanism during non-isothermal aging had been investigated using high resolution transmission electron microscopy for an Al–Mg–Si–Cu 6005A alloy. It was proposed that the needle-shaped β″ precipitates with a three-dimension coherency strain-field and an increased number density in the Al matrix provided the maximum strengthening effect for the Al–Mg–Si–Cu 6005A alloy. Simultaneously, it was also found that the formation and evolution of clusters in the early precipitation were associated with the vacancy binding energy, during which Si atoms played an important role in controlling the numbers density of Mg/Si co-clusters, and the excess Si atoms provided the increased number of nucleation sites for the subsequent precipitates to strengthen and improve the precipitation rate. Finally, based on the experimental observation and theoretical analysis, the precipitation sequence during the early precipitation in the Al–Mg–Si–Cu 6005A alloy was proposed as: supersaturated solid solution → Si-vacancy pairs, Mg-vacancy pairs and Mg clusters → Si clusters, and dissolution of Mg clusters → Mg atoms diffusion into the existing Si clusters → Mg/Si co-clusters → GP zone. - Highlights: • β″ precipitates provide the maximum strengthening effect for the 6005A alloy. • Si atoms play an important role in controlling the numbers of Mg/Si co-clusters. • The early aging sequence is deduced based on the solute-vacancy binding energy.

36 MATERIALS SCIENCE↗

Effects of quench rate and natural ageing on the age hardening behaviour of aluminium alloy AA6060

Quench sensitivity in Al–Mg–Si alloys has been largely attributed to the solute loss at the heterogeneous nucleation sites, primarily dispersoids, during slow cooling after extrusion. As such, the number density of dispersoids, the solute type and concentration are considered to be the key variables for the quench sensitivity. In this study, quench sensitivity and the influence of natural ageing in a lean Al–Mg–Si alloy, AA6060, which contains few dispersoids, have been investigated by hardness measurement, thermal analysis, transmission electron microscopy (TEM) and positron annihilation lifetime spectroscopy (PALS). It is shown that the quench sensitivity in this alloy is associated with the degree of supersaturation of vacancies after cooling. Due to vacancy annihilation and clustering during natural ageing, the quench sensitivity is more pronounced after a short natural ageing time (30 min) compared to a longer natural ageing time (24 h). Therefore, prolonged natural ageing not only leads to an increase in hardness, but can also have a positive effect on the quench sensitivity of lean Al–Mg–Si alloys. - Highlights: • Significant quench sensitivity observed in AA6060 alloy after 30 min natural ageing • Prolonged natural ageing increased hardness and reduced QS. • Low dispersoid density leads to insignificant QS from non-hardening precipitates. • Vacancy supersaturation identified as a contributor to QS.

36 MATERIALS SCIENCE↗

Localized plastic deformation and hardening in laser shock peened Inconel alloy 718SPF

Highlights: • The plastic strain in LSP-treated Inconel 718 alloy was characterized using EBSD. • LSP increases the low angle misorientations in the near-surface region, indicating the extend of plastic strain. • The near-surface plastic strain leads to an increase in local hardness and yield stress. - Abstract: Localized plastic deformation and hardening was studied in laser shock peened (LSP) Inconel 718 SPF (Super plastic forming), a fine grained Ni-Base superalloy, using electron backscatter diffraction (EBSD), nanoindentation, and micro pillar compression testing. 718SPF samples were LSP-treated with two different laser power densities. After LSP, the plastic deformation is manifested as increase in the fraction of low angle misorientations and the formation of sub-grain boundaries. EBSD was used to study plastic deformation as a function of distance from the peened surface for different laser intensities. Different approaches like image quality mapping and local misorientations analysis were used to study the in-depth distribution of the plastic strain. Results show that EBSD is effective in the qualitative characterization of localized plastic strain of the materials subjected to LSP.

36 MATERIALS SCIENCE↗

Austenite stability and M2C carbide decomposition in experimental secondary hardening ultra-high strength steels during high temperature austenitizing treatments

The present study deals with the austenite stability and M{sub 2}C carbide decomposition in three secondary hardening ultra-high strength (SHUHS) steels with varying levels of Cr and Mo (2Cr-1Mo, 2Cr-3Mo and 5Cr-5Mo) investigated using Vicker's hardness, optical and electron microscopy. These steels were subjected to high temperature austenitizing treatments at 1000, 1050, 1100 and 1150 °C. It has been established that increasing both Cr and Mo to 5 wt% as well as increasing the austenitizing temperature in this class of SHUHS steels is stabilizing the austenite such that almost 100% austenite is produced upon oil quenching. Further, higher Cr and Mo is also found to influence the stability of metastable M{sub 2}C carbide formed during processing of the steels. While the M{sub 2}C carbide in 2Cr-3Mo steel remained untransformed, it was found to transform partially to M{sub 6}C during austenitization of 5Cr-5Mo steel. Hardness measurements on these steels revealed that hardness is relatively insensitive to austenitizing temperature in 2Cr-1Mo steel, decreased in 2Cr-3Mo and decreased more drastically in 5Cr-5Mo steel with austenitizing temperature. This dependence has been correlated to the influence of composition on M{sub s} temperature and hence on retention of austenite as well as primary carbides. The experimental results were compared against theoretical calculations using ThermoCalc, which predict the presence of only M{sub 6}C in both 2Cr-3Mo and 5Cr-5Mo steels. The apparent discrepancy between theoretical and experimental observations has been correlated to kinetic factors.

36 MATERIALS SCIENCE↗

Austenite and precipitation in secondary-hardening ultra-high-strength stainless steel

Highlights: • Austenite and precipitation in Ferrium S53 steel were analyzed. • Austenite decreased to less than 5% after cryogenic treatment and tempering. • M{sub 2}C carbide could segregate inside martensite lath or in the larger parallel microstructure. - Abstract: Ferrium S53 is a new secondary-hardening ultra-high-strength stainless steel, with more Cr than other Co-Ni ultra-high-strength steels. Austenite has a great effect on the fracture toughness of this metal, and the carbides that are precipitated are the main strengthening phase of Ferrium S53 steel; in this study, its microstructural changes during heat treatment were observed and analyzed by X-ray diffraction (XRD), Optical microscope (OM), SEM, and transmission electron microscopy (TEM). About 40.85% retained austenite in the quenched sample is decreased to less than 5% after cryogenic treatment and tempering. In the final sample, block austenite is retained austenite, and film austenite around 5 nm in width is reverted austenite. Inside the martensite lath, parallel twin-like structures are actually segregated M{sub 2}C precipitates, and most of them are smaller than 20 nm. These precipitates can be aggregated into a several-micron-long parallel zonal microstructure.

36 MATERIALS SCIENCE↗

Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities

Isothermal compression experiment of AZ80 magnesium alloy was conducted by Gleeble thermo-mechanical simulator in order to quantitatively investigate the work hardening (WH), strain rate sensitivity (SRS) and temperature sensitivity (TS) during hot processing of magnesium alloys. The WH, SRS and TS were described by Zener-Hollomon parameter (Z) coupling of deformation parameters. The relationships between WH rate and true strain as well as true stress were derived from Kocks-Mecking dislocation model and validated by our measurement data. The slope defined through the linear relationship of WH rate and true stress was only related to the annihilation coefficient Ω. Obvious WH behavior could be exhibited at a higher Z condition. Furthermore, we have identified the correlation between the microstructural evolution including β-Mg17Al12 precipitation and the SRS and TS variations. Intensive dynamic recrystallization and homogeneous distribution of β-Mg17Al12 precipitates resulted in greater SRS coefficient at higher temperature. The deformation heat effect and β-Mg17Al12 precipitate content can be regarded as the major factors determining the TS behavior. At low Z condition, the SRS becomes stronger, in contrast to the variation of TS. The optimum hot processing window was validated based on the established SRS and TS values distribution maps for AZ80 magnesium alloy.

36 MATERIALS SCIENCE↗

Precipitation hardening of laser powder bed fusion Ti-6Al-4V

Here, the laser powder bed fusion (PBF-L) additive manufacturing (AM) community has dedicated significant efforts into process optimization and control for defect-free Ti-6Al-4V. As defects become less of an issue for PBF-L Ti-6Al-4V, the processing-structure-properties (PSP) relationships between AM microstructures can now be explored to optimize mechanical properties. Lower temperature aging treatments around 550 °C in wrought Ti-6A-4V have been historically understood to precipitation harden the α phase with an ordered, hexagonal close packed (HCP) α 2 phase. The α 2 phase existed as nanoscale Ti 3 Al precipitates coherent with the parent α phase. The goal of the present investigation was to implement a vacuum heat treatment of 545 °C for 100 hours on PBF-L Ti-6Al-4V. This vacuum heat treatment took place after an initial hot isostatic pressure (HIP) treatment that decomposed the as-built, martensitic microstructure. The vacuum aging successfully produced nanoscale precipitates of α 2 phase within α-laths, confirmed via atom probe tomography (APT). Microstructural-length scale and quasi-static mechanical properties were investigated by nanoindentation and uniaxial tensile tests of miniaturized test specimens. Given the sensitivity of Ti-6Al-4V mechanical properties to small changes in chemistry, all test specimens originated from the same build. The α 2 precipitation resulted in significantly harder α-laths (≈ 2 GPa) as measured via nanoindentation, as well as a relative yield and ultimate tensile strength increase of 60 MPa and 38 MPa, respectively. Analysis of Variance (ANOVA) of the datasets revealed no statistical differences in total elongation between the HIPed and HIPed + aged specimens, indicative of the aging treatment producing a net benefit of strength with no loss in ductility.

36 MATERIALS SCIENCE↗

Revealing cyclic hardening mechanism of a TRIP steel by real-time in situ neutron diffraction

Real-time in situ neutron diffraction was performed on a transformation-induced plasticity (TRIP) steel under cyclic loading at room temperature. By Rietveld refinement and single peak analysis, the volume fraction and average stress estimates as well as dislocation density of individual phases (austenite and martensite phase) were derived. The results reveal that the volume fraction of martensite phase, instead of individual phase strengthening, should be accounted for the remarkable secondary cyclic hardening.

Austenitic steels↗

Optimizing Earthquake Nowcasting With Machine Learning: The Role of Strain Hardening in the Earthquake Cycle

Abstract Nowcasting is a term originating from economics, finance, and meteorology. It refers to the process of determining the uncertain state of the economy, markets or the weather at the current time by indirect means. In this paper, we describe a simple two‐parameter data analysis that reveals hidden order in otherwise seemingly chaotic earthquake seismicity. One of these parameters relates to a mechanism of seismic quiescence arising from the physics of strain‐hardening of the crust prior to major events. We observe an earthquake cycle associated with major earthquakes in California, similar to what has long been postulated. An estimate of the earthquake hazard revealed by this state variable time series can be optimized by the use of machine learning in the form of the Receiver Operating Characteristic skill score. The ROC skill is used here as a loss function in a supervised learning mode. Our analysis is conducted in the region of 5° × 5° in latitude‐longitude centered on Los Angeles, a region which we used in previous papers to build similar time series using more involved methods (Rundle & Donnellan, 2020, https://doi.org/10.1029/2020EA001097 ; Rundle, Donnellan et al., 2021, https://doi.org/10.1029/2021EA001757 ; Rundle, Stein et al., 2021, https://doi.org/10.1088/1361-6633/abf893 ). Here we show that not only does the state variable time series have forecast skill, the associated spatial probability densities have skill as well. In addition, use of the standard ROC and Precision (PPV) metrics allow probabilities of current earthquake hazard to be defined in a simple, straightforward, and rigorous way.

58 GEOSCIENCES↗

Hardening by bubbles in He-implanted Ni

Detailed finite-element modeling of nanoindentation data is used to obtain the mechanical properties of Ni implanted with 1-10 at. % He. The mechanical properties of this material elucidate the fundamental materials science of dislocation pinning by nanometer-size gas bubbles and also have implications for radiation damage of materials. Cross-section transmission electron microscopy showed that implantation of 1-5 at. % He at room temperature or at 200 deg. C produced a highly damaged layer extending to a depth of 700-800 nm and containing a fine dispersion of He bubbles with diameters of 1.1{+-}0.2 nm. Implantation at 500 deg. C enlarged the bubble sizes. By fitting the nanoindentation data with a finite-element model that includes the responses of both the implanted layer and the unimplanted substrate in the deformation, the Ni(He) layers are shown to have hardnesses as much as approximately seven times that of untreated Ni, up to 8.3{+-}0.6 GPa. Examination of the dependence of yield strength on He concentration, bubble size, and bubble density reveals that an Orowan hardening mechanism is likely to be in operation, indicating that the bubbles pin dislocation motion as strongly as hard second-phase precipitates do. This strong pinning of dislocations by bubbles is also supported by our numerical simulations, which show that substantial applied shear stress is required to move a dislocation through an empty cavity.

36 MATERIALS SCIENCE↗

Development of a Beam Hardening Correction Method for a microCT Scanner Prototype

The radiographic projections acquired with a microCT were simulated and then corrected for beam hardening effects using the linearized signal to equivalent thickness (LSET) method. This procedure requires a calibration signal for each pixel obtained from a set of images with filters of increasing thickness. The projections are corrected by converting the signal to an equivalent thickness using interpolation over the calibration images. The method was validated using simulated projections of different phantoms. Two calibration sets were simulated using aluminum and water filters of thicknesses ranging from 0 to 5 mm and from 0 to 50 mm, respectively. A simulation of the phantoms' projections using a monoenergetic beam was also obtained to establish the relative intensity on the tomographic images when no cupping artifacts are present. Comparison between corrected and uncorrected tomographic images shows that the LSET method effectively corrects the cupping artifact. Streaking artifacts correction with the LSET method shows better results than with the traditional water correction method. Results are independent of the two calibration materials used.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Measurement of irradiation effects in precipitate hardened aluminum using nonlinear ultrasonic principles (in-situ)

Currently nuclear power plants are reaching the end of their initial design life. Yet, in order to meet the energy demands, twenty year extensions have been granted to many nuclear reactor facilities. These extensions will be ending by the year 2035, leaving a large gap in the available energy supply. In order to extend the life of these facilities it will imperative to develop techniques capable detecting damage in the aging nuclear facilities. However, the high temperature and high neutron flux environment limits the materials available for use in the nuclear reactor. Because of this limitation little NDE based inspection has been implemented in high radiation environments. Yet recent developments in the understanding of Aluminum Nitride (AlN) piezoelectric sensors high temperature and radiation dependent behavior have opened the door for in-situ experimentation. An experiment was designed to monitor the propagation of an ultrasonic wave in a precipitate hardened aluminum specimen while being subjected to radiation at the Pennsylvania State Universities Breazeale Reactor. Measurements of harmonic generation were made up to 1.85x10{sup 18} fluence with significant spectral difference between the pre-irradiated state and the post irradiated state. The connection between micro-structural material changes and harmonic measurements are addressed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Evidence for the suppression of intermediate anti-ferroelectric ordering and observation of hardening mechanism in Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} ceramics through cobalt substitution

Co-ion (5 mol %) substitution in Na{sub 1/2}Bi{sub 1/2}TiO{sub 3} (NBT) host lattice and their effects on the structural, ferroelectric and dielectric behavior has been investigated thoroughly in this present study. The substituted Co-ion at Ti-site acts an acceptor type doping and hardens (i.e., increase in coercivity) the system without any noticeable change in the remanent polarization values. However, the intermediate antiferroelectric (AFE) ordering which exists between 200 °C–280 °C in NBT system has been suppressed due to Co-ion substitution, which is an interesting feature for device applications.

36 MATERIALS SCIENCE↗

Low beryllium content Zr-based bulk metallic glass composite with plasticity and work hardenability

A modified Zr-based bulk metallic glass matrix composite Zr{sub 47.67}Cu{sub 40}Ti{sub 3.66}Ni{sub 2.66}Be{sub 6} has been produced by increasing the contents of elements of Zr and Cu with higher Poisson ratio and reducing the contents of Ti, Ni, and Be elements with lower Poisson ratio based on famous metallic glass former Vitreloy 1. A compressive yielding strength of 1804 MPa, fracture strength of 1938 MPa and 3.5% plastic strain was obtained for obtained metallic glass composite. Also, work-hardening behavior was observed during compressive experiment which was ascribed to the interaction of the in situ precipitated CuZr phase and shear bands.

36 MATERIALS SCIENCE↗

A STATISTICAL STUDY OF SPECTRAL HARDENING IN SOLAR FLARES AND RELATED SOLAR ENERGETIC PARTICLE EVENTS

Using hard X-ray observations from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), we investigate the reliability of spectral hardening during solar flares as an indicator of related solar energetic particle (SEP) events at Earth. All RHESSI data are analyzed, from 2002 February through the end of Solar Cycle 23, thereby expanding upon recent work on a smaller sample of flares. Previous investigations have found very high success when associating soft-hard-harder (SHH) spectral behavior with energetic proton events, and confirmation of this link would suggest a correlation between electron acceleration in solar flares and SEPs seen in interplanetary space. In agreement with these past findings, we find that of 37 magnetically well-connected flares (W30-W90), 12 of 18 flares with SHH behavior produced SEP events and none of 19 flares without SHH behavior produced SEPs. This demonstrates a statistically significant dependence of SHH and SEP observations, a link that is unexplained in the standard scenario of SEP acceleration at the shock front of coronal mass ejections and encourages further investigation of the mechanisms which could be responsible.

79 ASTRONOMY AND ASTROPHYSICS↗

Explanation of the spectral hardening of relativistic galactic cosmic-ray protons

The transport of Galactic cosmic rays is investigated in the energy range of 70 GeV⩽E⩽10{sup 6} GeV including the newly calculated proton loss rate due to pion production. The break in the energy loss rate at about 200 GeV leads to a hardening from low to high energies in the differential number density of about ∼E{sup 0.1}. This break is confirmed by measurements of different cosmic-ray experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Softening versus hardening transition in surface bilayer bonding of bismuth nanofilm

We have found that the surface bilayer of Bi(001) undergoes an unusual reversible transition at 350 K, well below the bulk melting temperature. Surface Debye temperature abruptly decreases without an anharmonic signature and the vertical-to-lateral ratio of surface thermal expansion increases in a critical manner, as revealed by high-resolution diffraction measurement. Because of the metallic-covalent bilayer structure of semimetal Bi, the most feasible explanation for the result is that bond softening occurs between the first and second bilayers at 350 K. This softening transition leads to the simultaneous hardening of the topmost intrabilayer bonds.

77 NANOSCIENCE AND NANOTECHNOLOGY↗