SEARCH · Engineering Papers

Results for “fourier analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2021

A parametric study of accelerated carbonation in alkali-activated slag

Resistance to carbonation is one important attribute that low-CO{sub 2} cement alternatives must possess, and is particularly crucial for cement alternatives subjected to aggressive CO{sub 2} concentrations such as those used in construction of oil wells and wells for below ground carbon sequestration. Here, a parametric study of alkali-activated slag (AAS) carbonation in aggressive environments has been conducted to examine (i) calcium carbonate polymorphism using X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy, and (ii) the extent of calcium carbonate formation and CO{sub 2} adsorption using thermogravimetric analysis (TGA). A range of AASs have been studied by varying the magnesium content of the slag, the activator type (sodium hydroxide and sodium silicate), the activator concentration, and the curing time prior to carbonation. It was uncovered that both (i) magnesium from the slag and (ii) silica from the activating solution are needed to reduce the propensity for the sodium-containing calcium-alumino-silicate-hydrate gel to undergo decalcification.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Characterization of the degradation of gamma-irradiated elastomers using Raman spectroscopy

This report presents key findings from Raman spectroscopic analysis of gamma-irradiated rubber samples extracted from a laminated lead-damped rubber (LDR) seismic isolation device. The samples were exposed to gamma radiation from a 60Co source in a Foss Therapy Services gamma irradiator, reaching absorbed doses up to 1600 kGy. A distinct threshold near 400 kGy was identified, beyond which significant spectral changes were observed. Two Raman peaks - at approximately 425 cm-1 and 2440 cm-1 - were tracked as a function of dose using Gaussian fitting. The 425 cm-1 peak, attributed to sulfur–sulfur (S–S) bond stretching (resulting from vulcanization of the rubber), exhibited a dose-dependent upshift, indicating radiation-induced crosslinking within the sulfur-based polymer network. Conversely, the 2440 cm-1 peak, likely associated with vibrational modes of additives or impurities, showed a downward shift with increasing dose, suggesting chain scission and degradation of non-rubber constituents. These results provide first-of-a-kind insights into the microstructural evolution of elastomers under high-dose gamma irradiation and establish a preliminary dose threshold for significant degradation. Future work will incorporate multi-modal characterization—including Fourier Transform Infrared (FTIR) spectroscopy, scanning electrom microscopy (SEM) of the rubber surface morphology, thermogravimetric analysis (TGA) to determine changes in thermal stability, and mechanical testing—to correlate molecular-level changes with macroscopic performance of these elastomers as damping media in seismic isolation devices. These findings are expected to provide regulatory guidance and design criteria for qualifying low-damping rubber seismic isolators in advanced nuclear reactor applications.

36 - MATERIALS SCIENCE↗

DOE OSTI2026

Continental-scale integration of soil metagenomes and organic matter chemistry reveals ubiquitous microbial capacity for chemically-recalcitrant carbon decomposition

Soil organic matter (SOM) decomposition by microorganisms is a major uncertainty in predicting terrestrial carbon–atmosphere feedbacks, partly because we lack understanding of the microbial diversity involved in depolymerizing different carbon pools across environmental gradients. We address this gap using a continental-scale dataset pairing shotgun metagenomes with high-resolution SOM chemistry, assembling 0.76 Tbp of prokaryotic MAGs (828 genomes) and identifying 66,727 SOM molecules from 47 standardized U.S. soil cores selected using respiration rates from 106 soils. Integrating these datasets reveals widespread microbial potential for depolymerizing chemically-recalcitrant SOM previously considered stable. We uncover complementary metabolic specialization between genera affiliated with two abundant bacterial orders, Rhizobiales and Chthoniobacterales, and an archaeal order, Nitrososphaerales. This metabolic partitioning is consistent across soil depths and activity levels, suggesting coordinated decomposition of complex SOM through distinct but complementary biochemical strategies. The metabolic potential for depolymerization of chemically-recalcitrant compounds is supported by the abundance of these molecules across the soils, as indicated by Fourier-Transform Ion Cyclotron Resonance Mass Spectrometry (FTICR-MS), and by flux balance analysis of metabolic models. Our results show that a substantial portion of ostensibly stable SOM remains vulnerable to microbial decomposition, a mechanism not captured in current Earth System Models.

Song, Young C. [Pacific Northwest National Laborat↗

DOE OSTI2026

Dataset for Cruz-O'Byrne et al (2026): "Divergent biogeochemical responses in upland coastal forest soils to repeated flooding and shifts in water chemistry"

Hydrologic disturbances from accelerated sea-level rise and the increasing frequency and intensity of storms and tidal flooding are altering biogeochemical processes in upland coastal forests, transforming these ecosystems into wetlands. However, the initial effects of flooding on belowground biogeochemistry and the mechanisms driving greenhouse gas dynamics and soil organic matter stability during the early stages of this transition remain poorly understood. This dataset presents the results of a mesocosm experiment conducted in a controlled, highly instrumented laboratory environment, in which freshwater and brackish water pulses were applied to intact soil monoliths from a temperate upland coastal forest to examine how floodwater chemistry influences soil biogeochemistry and organo-mineral interactions. All data files are plain-text CSV (comma-separated value), and no special software is required to read them. Details about the content of each file are available in the document “Dataset_readme”. The dataset consists of the following data: • rcruzobyrne_moisture: Soil volumetric water content (VWC) • rcruzobyrne_GHG: Headspace greenhouse gas (GHG) concentration and fluxes • rcruzobyrne_methane_isotopes: Headspace methane isotope signature • rcruzobyrne_porewater: Porewater chemistry • rcruzobyrne_CDOM: Porewater colored dissolved organic matter (CDOM) • rcruzobyrne_FTIR: Soil Fourier-transform infrared (FTIR) spectroscopy Details of the experimental setup, data collection, and data analysis are provided in the manuscript by Cruz-O’Byrne et al (2026) Divergent biogeochemical responses in upland coastal forest soils to repeated flooding and shifts in water chemistry. Biogeochemistry. https://doi.org/10.1007/s10533-026-01340-0

EARTH SCIENCE > ATMOSPHERE > GREENHOUSE GAS↗

DOE OSTI2020

Analysis of FFT Run-Times on LANL Computers

This paper gives results of a timing study for computing fast Fourier transforms (FFTs) on LANL based computing platforms. The platforms considered will be a node on Snow and a standard LANL HP laptop. The run-time for 1D FFTs will be measured for different sizes of data and the results are reported in FFTs/s.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Electrochemical Decomposition of Primary Alcohol Groups in Deep Eutectic Solvents

This work investigates the electrochemical decomposition of an ethylene glycol/sodium chloride electrolyte and a deep eutectic solvent (DES) comprised of ethylene glycol/choline chloride (ethaline). Understanding these reactions can help to better understand the safety risks of overcharge when these electrolytes are used in a battery and to guide the design of DES electrolytes for improved electrochemical stability. Analysis of the decomposition products was performed using a combination of coulometry, gas chromatography, mass spectrometry, and Fourier transform infrared spectroscopy. It was found that even at relatively low (mM) concentrations of water, a stoichiometric rate of hydrogen is produced under cathodic conditions in both the ethaline and EG/NaCl electrolytes. This suggest an electrochemical hydrolysis cathodic decomposition reaction that produces both hydrogen gas and hydroxyl ions. This reaction was verified in both electrolytes by also identifying the liquid phase products. Only liquid phase products were observed under anodic conditions. A suspected alcohol oxidation to aldehyde anodic decomposition reaction was confirmed through a similar analysis of products. A tertiary alcohol only DES was investigated to eliminate these decomposition paths and was found to have increased stability window compared to the primary alcohol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A general framework for removing point-spread function additive systematics in cosmological weak lensing analysis

ABSTRACT Cosmological weak lensing measurements rely on a precise measurement of the shear two-point correlation function (2PCF) along with a deep understanding of systematics that affect it. In this work, we demonstrate a general framework for detecting and modelling the impact of PSF systematics on the cosmic shear 2PCF and mitigating its impact on cosmological analysis. Our framework can detect PSF leakage and modelling error from all spin-2 quantities contributed by the PSF second and higher moments, rather than just the second moments, using the cross-correlations between galaxy shapes and PSF moments. We interpret null tests using the HSC Year 3 (Y3) catalogs with this formalism and find that leakage from the spin-2 combination of PSF fourth moments is the leading contributor to additive shear systematics, with total contamination that is an order-of-magnitude higher than that contributed by PSF second moments alone. We conducted a mock cosmic shear analysis for HSC Y3 and find that, if uncorrected, PSF systematics can bias the cosmological parameters Ωm and S8 by ∼0.3σ. The traditional second moment-based model can only correct for a 0.1σ bias, leaving the contamination largely uncorrected. We conclude it is necessary to model both PSF second and fourth moment contaminations for HSC Y3 cosmic shear analysis. We also reanalyse the HSC Y1 cosmic shear analysis with our updated systematics model and identify a 0.07σ bias on Ωm when using the more restricted second moment model from the original analysis. We demonstrate how to self-consistently use the method in both real space and Fourier space, assess shear systematics in tomographic bins, and test for PSF model overfitting.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Effects of 9.5 years warming on SOC concentration and composition in bulk soil and density fractions

Original data of whole-soil warming experiment after 9.5 years at Blodgett Forest Research Station. The Blodgett Forest is a mixed coniferous temperate forest with Mediterranean climate. The annual air temperature is 12.5℃ and the annual precipitation is 1774 mm yr-1- The soil is mesic ultic Alfisol of granitic origin, equivalent to Dystric Cambisol according to The World Reference Base for Soil Resources (WRB) system. The soil is warmed down to 1 m at + 4℃ by vertically installed heating cables. At the time of soil sampling on 1 May 2023, the whole-soil warming experiment had been running for approximately 9.5 years, from January 2014 to May 2023. The dataset includes: - Bulk_EA: C, N content, δ13C, and CN ratio of bulk soil; - Density_fractionation: organic carbon concentration, δ13C, and C/N ratio of free light fraction (fLF), occluded ligh fraction (oLF), and heavy fraction (HF); - PCA_DRIFT_AUC: original data of area under the curve (AUC) values of eight carbon bond types integrated on diffuse reflectance infrared fourier transform spectroscopy for each soil sample and soil fraction, which are consequently used for principal component analysis (PCA); - DRIFTS_stability_index: the calculation of aliphatic C–H (3000–2800 cm-1) to aromatic C=C (1670–1600 cm-1) ratios for each bulk soil sample and soil fraction. All data are provided in CSV format and can be viewed using Microsoft Excel.

Climate change↗

DOE OSTI2024

Time series methods for the analysis of soundscapes and other cyclical ecological data

Biodiversity monitoring has entered an era of ‘big data’, exemplified by a near-continuous collection of sounds, images, chemical and other signals from organisms in diverse ecosystems. Such data streams have the potential to help identify new threats, assess the effectiveness of conservation interventions, as well as generate new ecological insights. However, appropriate analytical methods are often still missing, particularly with respect to characterizing cyclical temporal patterns. Here, we present a framework for characterizing and analysing ecological responses that represent nonstationary, complex temporal patterns and demonstrate the value of using Fourier transforms to decorrelate continuous data points. In our example, we use a framework based on three approaches (spectral analysis, magnitude squared coherence, and principal component analysis) to characterize differences in tropical forest soundscapes within and across sites and seasons in Gabon. By reconstructing the underlying, cyclic behaviour of the soundscape for each site, we show how one can identify circadian patterns in acoustic activity. Soundscapes in the dry season had a complex diel cycle, requiring multiple harmonics to represent daily variation, while in the wet season there was less variance attributable to the daily cyclic patterns. Our framework can be applied to most continuous, or near-continuous ecological data collected at a fine temporal resolution, allowing ecologists to explore patterns of temporal autocorrelation at multiple levels for biologically meaningful trends. Such methods will become indispensable as biological big data are used to understand the impact of anthropogenic pressures on biodiversity and to inform efforts to mitigate them.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Thermal Stability of a Eutectic Mixture of Bis(2,2-dinitropropyl) Acetal and Formal: Part C. Kinetic Compensation Effect

Here, the aging behavior of a eutectic mixture of bis(2,2-dinitropropyl) acetal and formal [called NP here] has been studied in various atmospheres [dry (air or nitrogen) versus wet] at temperatures 70 °C and below. The properties of aged samples were analyzed using Fourier transform infrared (FTIR) spectroscopy, Karl Fischer (KF) titration, liquid chromatography/mass spectrometry (LC/MS), and thermogravimetric analysis (TGA) over a period of three years. The results indicate that at aging temperatures up to 55 °C, the initial rates of water production from nitrous acid (HONO) formation and decomposition into the water, NO, and NO 2 follows a 1st order rate law and the rate constants follow an Arrhenius law as a function of temperature. The activation energies and pre-factors for water and volatiles production yield a single linear kinetic compensation plot, suggesting a common degradation pathway between NP and the various combinations of its constituents. Within a narrow temperature range, around 55 °C, a trace amount of water in NP stabilizes its properties by preventing HONO elimination. When the aging temperature is substantially higher than 55 °C, the nature of the degradation mechanism changes. It is suspected that the degradation products of NO x , water, and HNO 3 serve as catalysts to auto-catalyze (kinetics beyond the 1st order) and further degrade NP. The effect of headspace volume on this auto-catalytic process will be discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Thermal Activation of a Copper-Loaded Covalent Organic Framework for Near-Ambient Temperature Hydrogen Storage and Delivery

Copper(II) formate is efficiently incorporated into the pores of a 2D imine-based covalent organic framework (COF) via coordination with the phenol and imine groups. The coordinated metal ion is then reduced to Cu(I) with a thermal treatment that evolves CO 2 . After loading with hydrogen gas, the majority of H 2 desorbs from the coordinatively saturated Cu(II) COF at temperatures < -100 degrees C. However, the activated Cu(I) COF retains adsorbed H 2 above room temperature. Adsorption/desorption of H 2 was highly reversible. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) strongly supports a molecular hydrogen interaction with Cu(I). A Kissinger analysis of variable ramp rate desorption experiments estimates the enthalpy of H 2 desorption from Cu(I) at 15 kJ mol -1 . The results represent an advance toward practical H 2 storage and delivery in a lightweight, stable, and highly versatile material.

08 HYDROGEN↗

DOE OSTI2023

Synthesis of a novel multifunctional organic–inorganic nanocomposite for metal ions and organic dye removals

In this study, we used solvent assisted mechano-synthesis strategies to form multifunctional organic–inorganic nanocomposites capable of removing both organic and inorganic contaminants. A zeolite X (Ze) and activated carbon (AC) composite was synthesized via state-of-the-art mechanical mixing in the presence of few drops of water to form Ze/AC. The second composite (Ze/L/AC) was synthesized in a similar fashion, however this composite had the addition of disodium terephthalate as a linker. Both materials, Ze/AC and Ze/L/AC, were characterized using scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), Powdered X-ray diffraction (P-XRD), Fourier-transform infrared spectrometry (FTIR), Accelerated Surface Area and Porosimetry System (ASAP), and thermal gravimetric analysis (TGA). The SEM–EDS displayed the surface structure and composition of each material. The sodium, oxygen and carbon contents increased after linker connected Ze and AC. The P-XRD confirmed the crystallinity of each material as well as the composites, while FTIR indicated the function groups (C=C, O–H) in Ze/L/AC. The contaminant adsorption experiments investigated the effects of pH, temperature, and ionic strength on the adsorption of methylene blue (MB) and Co(II) for each material. In MB adsorption, the first-order reaction rate of Ze/L/AC (0.02 h -1 ) was double that of Ze/AC (0.01 h -1 ). The reaction rate of Ze/L/AC (4.8 h -1 ) was also extraordinarily higher than that of Ze/AC (0.6 h -1 ) in the adsorption of Co(II). Ze/L/AC composite achieved a maximum adsorption capacity of 44.8 mg/g for MB and 66.6 mg/g for Co(II) ions. The MB adsorption of Ze/AC and Ze/L/AC was best fit in Freundlich model with R 2 of 0.96 and 0.97, respectively, which indicated the multilayer adsorption. In the Co(II) adsorption, the data was highly fit in Langmuir model with R 2 of 0.94 and 0.92 which indicated the monolayer adsorption. These results indicated both materials exhibited chemisorption. The activation energy of Ze/L/AC in MB adsorption (34.9 kJ mol -1 ) was higher than that of Ze/L/AC in Co (II) adsorption (26 kJ mol -1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Characterization of pitch carbon coating properties affecting the electrochemical behavior of silicon nanoparticle lithium-ion battery anodes

Silicon is an exciting material for next-generation lithium-ion battery anodes, due to its high theoretical capacity and availability, but its widespread implementation has been limited by extensive volume changes during cycling that causes mechanical damage and limits cycle life. One approach to mitigating these deleterious effects while still maintaining silicon's benefits is the addition of a pitch carbon coating to nanometer-sized silicon particles. Here, in this study, we present characterization of pitch-coated silicon electrodes without annealing and annealed at 700 °C and 1000 °C to determine the optimum temperature treatment, as well as pitch-only and silicon-only electrodes with and without annealing to elucidate the impacts of each component on early electrochemical behavior. Using Fourier transform infrared and Raman spectroscopies, atomic force and scanning spreading resistance microscopy, and electrochemical analysis, we find 700 °C to be the optimal annealing temperature, as amorphous carbon is created, which improves conductivity prior to cycling and facilitates ion storage during cycling that increases capacity. We also present in situ Raman spectroscopy data demonstrating the heterogeneous aging that occurs across the electrode surface during cycling.

25 ENERGY STORAGE↗

DOE OSTI2024

Quasiparton distributions in massive QED2: Toward quantum computation

We analyze the quasiparton distributions of the lightest 𝜂′ meson in massive two-dimensional quantum electrodynamics (QED2) by exact diagonalization. The Hamiltonian and boost operators are mapped onto spin qubits in a spatial lattice with open boundary conditions. The lowest excited state in the exact diagonalization is shown to interpolate continuously between an anomalous 𝜂′ state at strong coupling, and a nonanomalous heavy meson at weak coupling, with a cusp at the critical point. The boosted 𝜂′ state follows relativistic kinematics but with large deviations in the luminal limit. The spatial quasiparton distribution function and amplitude for the 𝜂′ state are computed numerically for increasing rapidity both at strong and weak coupling, and compared to the exact light front results. The numerical results from the boosted form of the spatial parton distributions, compare fairly with the inverse Fourier transformation of the luminal parton distributions, derived in the lowest Fock space approximation. Our analysis points out some of the limitations facing the current lattice program for the parton distributions.

Lattice field theory↗

DOE OSTI2023

Microstructural Simulation of Ion-Irradiated Natural Rocks and Minerals

This report details the contribution of Oak Ridge National Laboratory to the Nuclear Energy University Program (NEUP) project, "Rapid Characterization of Concrete Mineralogy using Multi-Scale Tools" led by the University of Illinois at Urbana-Champaign. To support the subsequent license renewal (SLR) of the US nuclear power plants (NPPs) fleet, the performance of concrete-forming aggregates against neutron irradiation needs to be assessed. Ion irradiation is proposed as a rapid, cost-effective surrogate method to full neutron irradiation testing. To complement the characterization of ion-irradiated rock specimens, ORNL has run finite-elements and fast-Fourier transform (FFT-based) simulations using the codes MARS and Microstructure-Oriented Scientific Analysis of Irradiated Concrete (MOSAIC). The main conclusion of this analysis is that the apparent post–ion-irradiation step-height underestimates the accumulated free radiation-induced volumetric expansion (RIVE) in the ion-implanted depth by about 15% at full amorphization and about 25% toward the beginning of the ion irradiation experiment. The discrepancy is explained by the fact that the step height is proportional to the sum of the RIVE (i.e., one third of the RIVE) and the irradiation-assisted plastic strains in the vertical direction (lower than two thirds of the RIVE). Because of the large lateral compressive stresses caused by the restraining effect of the unirradiated substrate, the stress field in the mineral grains and at the grain boundary (GB) in the ion-implanted layer is much different than the comparable stress field occurring during neutron irradiation. Hence, the mismatch RIVE causing cracks in the rock-forming minerals leads to different cracking patterns. Ion irradiation continues to be used as a rapid technique to assess the RIVE potential of rocks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Development of Multiresolution Capabilities for the Holistic Energy Resource Optimization Network (HERON) tool A progress update

INL researchers work on technoeconomic analyses for integrated energy systems (IES) using the Framework for Optimization of ResourCes and Economics (FORCE). Within FORCE, researchers use the Holistic Energy Resource Optimization Network (HERON) tool to conduct optimization of grid portfolios under uncertain market conditions. These optimizations determine optimal capacities for all IES components and strategies for resource dispatch which maximize some economic metric (e.g., net present value). Resource dispatch occurs on finer timescales (typically hours) and thus are asked to respond to a given time series (e.g. hourly load demand profiles for a grid, or pre-determined electricity prices). Volatile and complex bidding dynamics as well as poorly forecasted weather events within deregulated markets add uncertainty to the time series; FORCE can address this uncertainty by training a reduced order model on historical time series and generate unique synthetic time series which represent individual scenarios or realizations of the market. The IES configuration can be simulated under these different sampled realizations and a stochastic optimization is conducted which optimizes the expected value of the desired economic metric. The training of a synthetic time series generator is limited by the chosen time resolution; dynamics can occur on different time scales. Seasonal demand trends can dominate faster dynamical events (such as power outages from certain sectors or severe weather events) which might not get captured correctly by the trained model. In this report, we investigate different ways of addressing the training and generation of time series on multiple time scales using three main algorithms: wavelet decomposition, dynamic mode decomposition, and generative adversarial networks for time series. We demonstrate a time series analysis that yields information on not just the frequency space but also temporal space: where a fast Fourier transform can provide what frequencies dominate, the new algorithms can provide when the frequencies dominate as well. These analyses can help improve IES optimization by allowing researchers to couple simulations at different timescales when it is most needed - seasonal, day-ahead, and real time optimization - with greater computational efficiency. Future work will include implementation of a subset of the proposed algorithms into the FORCE toolset and application of these analyses into multiple timescale optimization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2021

A Hybrid Energy System Workflow for Energy Portfolio Optimization

This manuscript develops a workflow, driven by data analytics algorithms, to support the optimization of the economic performance of an Integrated Energy System. The goal is to determine the optimum mix of capacities from a set of different energy producers (e.g., nuclear, gas, wind and solar). A stochastic-based optimizer is employed, based on Gaussian Process Modeling, which requires numerous samples for its training. Each sample represents a time series describing the demand, load, or other operational and economic profiles for various types of energy producers. These samples are synthetically generated using a reduced order modeling algorithm that reads a limited set of historical data, such as demand and load data from past years. Numerous data analysis methods are employed to construct the reduced order models, including, for example, the Auto Regressive Moving Average, Fourier series decomposition, and the peak detection algorithm. All these algorithms are designed to detrend the data and extract features that can be employed to generate synthetic time histories that preserve the statistical properties of the original limited historical data. The optimization cost function is based on an economic model that assesses the effective cost of energy based on two figures of merit: the specific cash flow stream for each energy producer and the total Net Present Value. An initial guess for the optimal capacities is obtained using the screening curve method. The results of the Gaussian Process model-based optimization are assessed using an exhaustive Monte Carlo search, with the results indicating reasonable optimization results. The workflow has been implemented inside the Idaho National Laboratory’s Risk Analysis and Virtual Environment (RAVEN) framework. The main contribution of this study addresses several challenges in the current optimization methods of the energy portfolios in IES: First, the feasibility of generating the synthetic time series of the periodic peak data; Second, the computational burden of the conventional stochastic optimization of the energy portfolio, associated with the need for repeated executions of system models; Third, the inadequacies of previous studies in terms of the comparisons of the impact of the economic parameters. The proposed workflow can provide a scientifically defendable strategy to support decision-making in the electricity market and to help energy distributors develop a better understanding of the performance of integrated energy systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

Super-resolution stimulated X-ray Raman spectroscopy

Propagation of intense X-ray pulses through dense media has led to the observation of phenomena such as atomic X-ray lasing, self-induced transparency and stimulated X-ray Raman scattering (SXRS)4. SXRS has been long predicted as a means to launch and probe valence-electron wavepackets and as a building block for nonlinear X-ray spectroscopies. However, experimental observations of SXRS to date have not provided spectroscopic information, and theoretical modelling has largely implemented hard-to-realize phase-coherent attosecond pulses. Here we demonstrate SXRS with spectroscopic precision, that is, detection of valence-excited states in neon with a near Fourier-limited joint energy–time resolution of 0.1 eV–40 fs. We used a new covariance analysis between statistically spiky broadband incident X-ray and scattered X-ray Raman pulses. Using 18,000 single shots, we beat not only the incident (about 8 eV) bandwidth but also the approximately 0.2 eV instrumental energy resolution, thus creating super-resolution conditions, in analogy to super-resolved fluorescence microscopy. Our experimental results, supported by ab initio propagation simulations, reveal the competition between lasing in the ion and stimulated Raman scattering in the neutral. We demonstrate enhanced signal collection efficiency and a broad excitation window, surpassing spontaneous Raman efficiencies by orders of magnitude. This stochastic SXRS approach represents a first step towards tracking elementary events that determine chemical outcomes.

nonlinear x-ray spectroscopy↗