SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A laboratory simulation of solar wind interaction with plasma shells of nonmagnetic planets is reported. It is shown that the momentum transfer from the plasma flow to the shell occurs due to the presence of a frozen-in magnetic field. Without a magnetic field frozen-in, the ionosphere has no sharp boundary and a shock wave does not form in the flow.
A three-dimensional, laminar boundary-layer method is applied to the incompressible flow over a slender delta wing at incidence. The predictor-corrector finite-difference scheme of Matsuno is used to difference the governing equations. The method has the advantages that no iterations are required to advance the solution and the cross-flow derivatives are formed independent of the cross-field direction. The difference scheme is demonstrated to yield accurate numerical results when compared to the exact solution of the three-dimensional boundary-layer equations for parabolic flow over a moving flat plate. The method is applied to delta wings of various sweep angles at angles of attack up to 20 deg., with the inviscid solution determined using a higher-order, three-dimensional panel method.
Simulation of two-phase flows is relevant for reactor design and safety at normal operation or during accident scenarios. Often, the two-phase flow is in a regime in which slugs are formed or where the flow stratifies. Modeling such situations using standard single-phase Reynolds-averaged Navier-Stokes (RANS) turbulence models fails due to an overestimation of the eddy viscosity at the resolved two-phase interface. To solve this, an ad hoc turbulence damping term has been proposed in the literature that reduces the turbulence production locally at a two-phase interface, analogously to turbulence wall functions. However, this approach must be tailored to the specific setting and does not consider physical contributions such as surface tension or flow topology. Therefore, the problem of two-phase interfacial turbulence must be studied more in-depth. In this work, we consider co-current turbulent Taylor bubble flow using high-fidelity numerical simulation. The Basilisk code is used to simulate a Taylor bubble rising in a vertical pipe. By simulating the bubble in a moving frame of reference, we may study the turbulent kinetic energy (TKE) budgets ahead of the bubble, in its wake, and across the interface. The implementation of the TKE budget computation and the underlying averaging techniques are validated for the single-phase region ahead of the Taylor bubble using reference direct numerical simulation data. The analysis of the TKE budgets in the setting of Taylor bubble flow allows for the study of how turbulence behaves due to the presence of a two-phase interface and, in turn, supports the improvement of two-phase RANS models.
Numerical determination of flux components in vapor flow considers split boundary conditions in both directions to form grid lines for flow continuity equations. Matrix of coefficients obtains direct solution for potential flow problem without iteration.
The laminar flow equations in differential form are solved numerically on a digital computer for flow of a very high temperature gas through the entrance region of an externally cooled tube. The solution method is described and calculations are carried out in conjunction with experimental measurements. The agreement with experiment is good, with the result indicating relatively large energy and momentum losses in the highly cooled flows considered where the pressure is nearly uniform along the flow and the core flow becomes non-adiabatic a few diameters downstream of the inlet. The effects of a large range of Reynolds number and Mach number (viscous dissipation) are also investigated.
The unusual composition of the nakhlites, a group of pyroxenitic martian meteorites with young ages, presents an opportunity to learn about nonbasaltic magmatic activity on another planet. However, the limited number of these meteorites makes unraveling their history difficult. A promising terrestrial analog for the formation of the nakhlites is Theo's Flow in Ontario, Canada. This atypical, 120 m-thick flow differentiated in place, forming distinct layered lithologies of peridotite, pyroxenite, and gabbro. Theo's pyroxenite and the nakhlites share strikingly similar petrographies, with concentrated euhedral to subhedral augite grains set in a plagioclase-rich matrix. These two suites of rocks also share specific petrologic features, mineral and whole-rock compositional features, and size and spatial distributions of cumulus grains. The numerous similarities suggest that the nakhlites formed by a similar mechanism in a surface lava flow or shallow intrusion. Their formation could have involved settling of crystals in a phenocryst-laden flow or in situ nucleation and growth of pyroxenes in an ultramafic lava flow. The latter case is more likely and requires steady-state nucleation and growth of clusters of pyroxene grains (and olivine in the nakhlites), circulating in a strongly convecting melt pool, followed by settling and continued growth in a thickening cumulate pile. Trapped pockets of intercumulus liquid in the pile gradually evolved, finally growing Fe-enriched rims on cumulus grains. With sufficient evolution, the melt reached plagioclase supersaturation, causing rapid growth of plagioclase sprays and late-stage mesostasis growth.
The development of aerospace vehicles, over the years, was an evolutionary process in which engineering progress in the aerospace community was based, generally, on prior experience and data bases obtained through wind tunnel and flight testing. Advances in the fundamental understanding of flow physics, wind tunnel and flight test capability, and mathematical insights into the governing flow equations were translated into improved air vehicle design. The modern day field of Computational Fluid Dynamics (CFD) is a continuation of the growth in analytical capability and the digital mathematics needed to solve the more rigorous form of the flow equations. Some of the technical and managerial challenges that result from rapidly developing CFD capabilites, some of the steps being taken by the Fort Worth Division of General Dynamics to meet these challenges, and some of the specific areas of application for high performance air vehicles are presented.
A method of reacting TiCl4 with water saturated gaseous nitrogen (GN2) at the entrance into a high temperature gas flow is described. The TiO2 particles formed are then entrained in the gas flow and used as seed particles for making laser anemometry (LA) measurements of the flow velocity distribution in the hot gas. Scanning electron microscope photographs of the TiO2 particles are shown. Data rate of the LA processor was measured to determine the amount of TiO2 formed. The TiCl4 and mixing gas flow diagram is shown. This work was performed in an open jet burner.
The Cassini Imaging Science System (ISS) has been returning images of Titan, along with other Saturnian satellites. Images taken through the 938 nm methane window see down to Titan's surface. One of the purposes of the Cassini mission is to investigate possible fluid cycling on Titan. Lemniscate features shown recently and radar evidence of surface flow prompted us to consider theoretically the creation by methane fluid flow of streamlined forms on Titan. This follows work by other groups in theoretical consideration of fluid motion on Titan's surface.
Alternate concepts and design approaches were developed for suction panels and techniques were defined for integrating these panel designs into a complete LFC 200R wing. The design concepts and approaches were analyzed to assure that they would meet the strength, stability, and internal volume requirements. Cost and weight comparisions of the concepts were also made. Problems of integrating the concepts into a complete aircraft system were addressed. Methods for making splices both chordwise and spanwise, fuel light joints, and internal duct installations were developed. Manufacturing problems such as slot aligment, tapered slot spacing, production methods, and repair techniques were addressed. An assessment of the program was used to developed recommendations for additional research in the development of SPF/DB for LFC structure.
Using a generalized form of Darcy's law that includes matrix deformation, solitary wave solutions called magmons, consisting of localized regions of high porosity that ascend through the porous matrix, are extended to two spatial dimensions, and their impact on igneous processes is discussed. It is suggested that magmons are unlikely to be important in regions of broad upswelling where compaction processes are unimportant. Liquid supplied from below to a stable partially molten region of the athenosphere, as occurs beneath ocean volcanic centers or in subcontinental mantle, is expected to ascend in magmons. The waveform of a magmon ascends faster than the liquid within the magmon, taking in new liquid from above as old liquid is lost from below, and it is suggested that magmons can mobilize small degrees of partial melt and deliver it to the surface.
An inclined jet impinging on the ground creates a wall flow that spreads radially from the point of impingement. If a cross-flow is introduced, the upstream component of the wall flow will separate from the ground and create what has been termed the 'ground vortex.' The ground vortex has been shown to have a significant impact on aircraft aerodynamics and is one of the major contributors to hot gas ingestion. The paper discusses a recent study which included a generic wing-body configuration for assessing the impact of the ground vortex on configuration aerodynamics. Wind tunnel tests using fixed ground boards, moving ground belts, and moving model tests are discussed. The emphasis of the data is macroscopic, i.e. forward location of the vortex, effects of ground height, etc.
In this paper we review the basic development of Linear Interaction Approximation (LIA), a linear inviscid approach to study the interaction of weak turbulence with flow discontinuities, and implement a formulation to calculate the acoustic field due to the incidence of vortical and entropic disturbances on a planar shock. The work is motivated by the observance in nozzles with internal mixers and external plugs of a shock formed by local flow accelerations, even at sub-critical pressure ratios. Exhaust systems with internally mixed/externally plugged nozzles are currently under consideration for use in commercial supersonic aircraft and it is important to have an assessment of the impact of this shock on the noise radiated by these nozzles. Numerical results are presented for the fluctuating pressure emitted by (separate) incident single-wave vorticity and entropy modes and for incident isotropic fields of turbulence and entropy. Further applications of the formulation to the flow fields in internally mixed/externally plugged nozzles, and to the modification of mixing noise sources and the scattering of internally generated noise by the shock, are discussed as future work.
In this paper we review the basic development of Linear Interaction Approximation (LIA), a linear inviscid approach to study the interaction of weak turbulence with flow discontinuities, and implement a formulation to calculate the acoustic field due to the incidence of vortical and entropic disturbances on a planar shock. The work is motivated by the observance in nozzles with internal mixers and external plugs of a shock formed by local flow accelerations, even at sub-critical pressure ratios. Exhaust systems with internally mixed/externally plugged nozzles are currently under consideration for use in commercial supersonic aircraft and it is important to have an assessment of the impact of this shock on the noise radiated by these nozzles. Numerical results are presented for the fluctuating pressure emitted by (separate) incident single-wave vorticity and entropy modes and for incident isotropic fields of turbulence and entropy. Further applications of the formulation to the flow fields in internally mixed/externally plugged nozzles, and to the modification of mixing noise sources and the scattering of internally generated noise by the shock, are discussed as future work.
In this paper we review the basic development of Linear Interaction Approximation (LIA), a linear inviscid approach to study the interaction of weak turbulence with flow discontinuities, and implement a formulation to calculate the acoustic field due to the incidence of vortical and entropic disturbances on a planar shock. The work is motivated by the observance in nozzles with internal mixers and external plugs of a shock formed by local flow accelerations, even at sub-critical pressure ratios. Exhaust systems with internally mixed/externally plugged nozzles are currently under consideration for use in commercial supersonic aircraft and it is important to have an assessment of the impact of this shock on the noise radiated by these nozzles. Numerical results are presented for the fluctuating pressure emitted by (separate) incident single-wave vorticity and entropy modes and for incident isotropic fields of turbulence and entropy. Further applications of the formulation to the flow fields in internally mixed/externally plugged nozzles, and to the modification of mixing noise sources and the scattering of internally generated noise by the shock, are discussed as future work.
Acceleration methods are presented for solving the steady state incompressible equations. These systems are preconditioned by introducing artificial time derivatives which allow for a faster convergence to the steady state. The compressible equations in conservation form with slow flow are also considered. Two arbitrary functions, alpha and beta, are introduced in the general preconditioning. An analysis of this system is presented and an optimal value for beta is determined given a constant, alpha. It is further shown that the resultant incompressible equations form a symmetric hyperbolic system and so are well posed. Several generalizations to the compressible equations are presented which generalize previous results.
Over the past decade, NASA Langley Research Center (LaRC) has championed integrally stiffened cylinder (ISC) technology for single-piece, cryogenic tank barrels on launch vehicles. The current investigation aims to extend the hybrid spin/shear/flow forming process to aircraft fuselage structures, a damage tolerance critical application. The WF Maschinenbau VUD-600® vertical spin/flow forming facility recently established at LaRC represents a reasonable sub-scale facsimile of the ISC deformation process for research and development (R&D) purposes. The objective of this study is to explore whether tensile testing with digital image correlation (DIC) is an effective way to rank the formability of candidate aerospace Al alloys and expedite empirical forming trials. Specific tensile data, such as reduction of area, strain hardening exponent, and modulus of resilience, are used as formability metrics for a variety of alloy/temper/product form combinations. Results from high-strength aluminum alloys AA 2139, AA 2050, AA 2043 and AA 2219 are compared with the medium-strength, highly formable AA 6061 benchmark. Rolled, forged and cast preform materials in both the -O temper (fully annealed) and -T4 temper (solution-treated, quenched, and naturally aged) conditions are evaluated. AA 2139 plate in the -T4 temper emerges as the top-ranked material, based on the criteria selected. Starting with preforms in the -T4 temper will result in flow-formed material exhibiting mechanical properties closer to aircraft fuselage requirements. The optimum balance between strength and damage tolerance may also be achieved via post-forming procedures that avoid quenching and stretching.
In this study, we present a laboratory setup to test the energy flow in the form of underground heat storage using hydraulic fractures, a so-called Fracture Thermal Energy Storage (FTES) system. In the experiment, de-ionized water is circulated under high pressure through steel tubing automatically heated to a target temperature. The fluid adjusts to the tubing temperature during its flow before entering a production well drilled into a 250 mm edge length block of Zimbabwe Gabbro. The warm fluid then circulates through a previously created hydraulic fracture at mid-height of the block to a production well drilled at the block periphery. External fracture appearances are sealed using an epoxy resin and the production well by a cork of polydimethylsiloxane. In this cork, tubing to an open outlet is glued. We demonstrated through the results of a preliminary heating experiment that we can transfer nearly all of the heat from the circulating fluid to the block. An efficient charging of the thermal battery is achieved. This first-order demonstration is currently under further improvement and serves as a knowledge basis for the upscaling of mid- to large-scale field implementation of FTES systems.