Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Visualization of Atomization Gas Flow and Melt Break-up Effects in Response to Nozzle Design

Both powder particle size control and efficient use of gas flow energy are highly prized goals for gas atomization of metal and alloy powder to minimize off-size powder inventory (or 'reverb') and excessive gas consumption. Recent progress in the design of close-coupled gas atomization nozzles and the water model simulation of melt feed tubes were coupled with previous results from several types of gas flow characterization methods, e.g., aspiration measurements and gas flow visualization, to make progress toward these goals. Size distribution analysis and high speed video recordings of gas atomization reaction synthesis (GARS) experiments on special ferritic stainless steel alloy powders with an Ar+O{sub 2} gas mixture were performed to investigate the operating mechanisms and possible advantages of several melt flow tube modifications with one specific gas atomization nozzle. In this study, close-coupled gas atomization under closed wake gas flow conditions was demonstrated to produce large yields of ultrafine (dia.<20 {mu}m) powders (up to 32%) with moderate standard deviations (1.62 to 1.99). The increased yield of fine powders is consistent with the dual atomization mechanisms of closed wake gas flow patterns in the near-field of the melt orifice. Enhanced size control by stabilized pre-filming of the melt with a slotted trumpet bell pour tube was not clearly demonstrated in the current experiments, perhaps confounded by the influence of the melt oxidation reaction that occurred simultaneously with the atomization process. For this GARS variation of close-coupled gas atomization, it may be best to utilize the straight cylindrical pour tube and closed wake operation of an atomization nozzle with higher gas mass flow to promote the maximum yields of ultrafine powders that are preferred for the oxide dispersion strengthened alloys made from these powders.

36 MATERIALS SCIENCE↗

Concentric-flow electrokinetic injector enables serial crystallography of ribosome and photosystem II

In this paper, we describe a concentric-flow electrokinetic injector for efficiently delivering microcrystals for serial femtosecond X-ray crystallography analysis that enables studies of challenging biological systems in their unadulterated mother liquor. Finally, we used the injector to analyze microcrystals of Geobacillus stearothermophilus thermolysin (2.2-Å structure), Thermosynechococcus elongatus photosystem II (<3-Å diffraction) and Thermus thermophilus small ribosomal subunit bound to the antibiotic paromomycin at ambient temperature (3.4-Å structure).

59 BASIC BIOLOGICAL SCIENCES↗

A fourth order sharp immersed method for the incompressible Navier-Stokes equations with stationary and moving boundaries and interfaces

We propose a fourth order Navier-Stokes solver based on the immersed interface method (IIM), for flow problems with stationary and one-way coupled moving boundaries and interfaces. Our algorithm employs a Runge-Kutta-based projection method that maintains high-order temporal accuracy in both velocity and pressure for steady and unsteady velocity boundary conditions. Fourth order spatial accuracy is achieved through a novel fifth order IIM discretization scheme for the advection term, as well as existing high-order interface-corrected finite difference schemes for the other differential operators. Using a set of manufactured flow problems with stationary and moving boundaries, we demonstrate fourth order convergence of velocity and pressure in the infinity norm, both inside the domain and on the immersed boundaries. The solver’s performance is further validated through a range of practical flow simulations, highlighting its efficiency over a second order scheme. Finally, we showcase the ability of our immersed discretization scheme to handle interface-coupled multiphysics problems by solving a conjugate heat transfer problem with multiple immersed solids. Overall, the proposed approach robustly combines the efficiency of high order discretization schemes with the flexibility of immersed discretizations for flow problems with complex, moving boundaries and interfaces.

42 ENGINEERING↗

Optimization of wind plant layouts using an adjoint approach

Abstract. Using adjoint optimization and three-dimensional steady-state Reynolds-averaged Navier–Stokes (RANS) simulations, we present a new gradient-based approach for optimally siting wind turbines within utility-scale wind plants. By solving the adjoint equations of the flow model, the gradients needed for optimization are found at a cost that is independent of the number of control variables, thereby permitting optimization of large wind plants with many turbine locations. Moreover, compared to the common approach of superimposing prescribed wake deficits onto linearized flow models, the computational efficiency of the adjoint approach allows the use of higher-fidelity RANS flow models which can capture nonlinear turbulent flow physics within a wind plant. The steady-state RANS flow model is implemented in the Python finite-element package FEniCS and the derivation and solution of the discrete adjoint equations are automated within the dolfin-adjoint framework. Gradient-based optimization of wind turbine locations is demonstrated for idealized test cases that reveal new optimization heuristics such as rotational symmetry, local speedups, and nonlinear wake curvature effects. Layout optimization is also demonstrated on more complex wind rose shapes, including a full annual energy production (AEP) layout optimization over 36 inflow directions and 5 wind speed bins.

17 WIND ENERGY↗

Specific energy cost for nitrogen fixation as NO x using DC glow discharge in air

Abstract We report on factors influencing the specific energy costs of producing NO x from pin-to-pin DC glow discharges in air at atmospheric pressure. Discharge current, gap distance, gas flowrate, exterior tube wall temperature and the presence and position of activated Al 2 O 3 catalyst powder were examined. The presence of heated catalyst adjacent to the plasma zone improved energy efficiency by as much as 20% at low flows, but the most energy efficient conditions were found at the highest flowrates that allowed a stable discharge (about 10–15 l min −1 ). Under these conditions, the catalyst had no effect on efficiency in the present study. The lowest specific energy cost was observed to be between about 200–250 GJ/tN. The transport of active chemical species and energy are likely key factors controlling the specific energy costs of NO x production in the presence of a catalyst. Air plasma device design and operating conditions must ensure that plasma-generated active intermediate chemical species transport is optimally coupled with catalytically active surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, microstructural and surface properties of a specific CeO{sub 2}-Bi{sub 2}O{sub 3} multiphase system obtained at 600 {sup o}C

Polycrystalline samples of (1-x) CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} phases, where x is the atom fraction of bismuth have been synthesized by the precipitation process and after the thermal treatment at 600 {sup o}C, under air. Samples are first characterized by the X-ray diffraction and scanning electron microscopy. To determine the samples specific surface areas, Brunauer-Emmett-Teller (BET) analyses have been performed. In the composition range 0{<=}x{<=}0.20, a cubic solid solution with fluorite structure is obtained. For compositions x comprised between 0.30 and 0.90, two types of T' (or {beta}') and T (or {beta}) tetragonal phases, similar to the well-known {beta}' or {beta} Bi{sub 2}O{sub 3} metastable structural varieties, are observed. However, the crystal cell volumes of these {beta}' or {beta} Bi{sub 2}O{sub 3} phases increase with the composition x in bismuth: this might be due to the presence of defects or substitution by cerium atoms, in the tetragonal lattices. Using X-ray diffraction profile analyses, correlations between bismuth composition x and crystal sizes or lattice distortions have been established. The solid-gas interactions between these polycrystalline materials and air-CH{sub 4} and air-CO flows have been studied as a function of temperature and composition x, using Fourier transform infrared (FTIR) analyses of the conversions of CH{sub 4} and CO gases into the CO{sub 2} gas. The transformations of CH{sub 4} and CO molecules as a function of time and temperature are determined through the intensities of FTIR CO{sub 2} absorption bands. Using the specific surface areas determined from BET analyses, these FTIR intensities have been normalized and compared. For all bismuth compositions, a low catalytic reactivity is observed with air-CH{sub 4} gas flows, while, for the highest bismuth compositions, a high catalytic reactivity is observed with air-CO gas flows. -- Graphical abstract: Catalytic efficiencies of CeO{sub 2}-Bi{sub 2}O{sub 3}system: catalytic actions on methane (on the left) or carbon monoxide (on the right) of (1-x)CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} samples, as a function of the fraction x, and for fixed temperatures: on the vertical axis, the intensities of CO{sub 2} FTIR absorption bands are reported. Strong efficiency of bismuth rich samples for CO conversion. Display Omitted Research highlights: {yields} Stabilization of metastable polymorph Bi{sub 2}O{sub 3} phases in the mix system [(1-x)CeO{sub 2}+(x/2)Bi{sub 2}O{sub 3}] at 600 {sup o}C. {yields} Solid gas interactions between this system and air-CO or air-CH{sub 4} gas flows at various temperatures and bismuth compositions. {yields} High efficiency of bismuth rich samples to convert CO into CO{sub 2}.

36 MATERIALS SCIENCE↗

Radial storage efficiency for CO 2 injection: Quantifying effectiveness of local flow control methods

Basin-scale geologic carbon sequestration will require hundreds of injection wells, each of which has costs related to property rights and regulatory requirements that correlate with the areal size of the carbon dioxide plume. These surface-footprint-related issues motivate maximizing storage efficiency radially away from each well. Radial storage efficiency (RSE) is defined here as the ratio of the volumetrically weighted carbon dioxide free-phase saturation within a given radius away from the injection well to the available pore space within that same radius. Maximizing RSE effectively minimizes the radial extent of the CO 2 plume. Optimizing RSE around individual wells requires local flow control injection strategies that can increase the uniformity of the filling of pore space around the well over the entire length of the perforated injection interval despite differences in local formation transmissivity. The goal of uniform filling of the storage reservoir starting from the well outward is to maximize carbon dioxide sweep and trapping locally outward from the well in all of the layers of the storage region before buoyancy forces predominate and drive carbon dioxide upward where it will spread laterally under lower-permeability layers. Example simulations of carbon dioxide injection into a layered storage system with and without local flow control are presented to show the advantage of uniformly filling all layers and how RSE can be used to quantify storage efficiency for the two different injection approaches. Published 2021. This article is a U.S. Government work and is in the public domain in the USA.

03 NATURAL GAS↗

Numerical Simulation of Ion Transport in a Nano-Electrospray Ion Source at Atmospheric Pressure

Understanding ion transport properties from the ion source to the mass spectrometer (MS) is essential for optimizing device performance. Numerical simulation helps in understanding of ion transport properties and, furthermore, facilitates instrument design. In contrast to previously reported numerical studies, ion transport simulations in a continuous injection mode whilst considering realistic space-charge effects have been carried out. The flow field was solved using Reynolds-averaged Navier-Stokes (RANS) equations, and a particle-in-cell (PIC) method was applied to solve a time-dependent electric field with local charge density. A series of ion transport simulations were carried out at different cone gas flow rates, ion source currents, and capillary voltages. A force evaluation analysis reveals that the electric force, the drag force, and the Brownian force are the three dominant forces acting on the ions. Both the experimental and simulation results indicate that cone gas flow rates of ≤250 slph (standard liter per hour) are important for high ion transmission efficiency, as higher cone gas flow rates reduce the ion signal significantly. The simulation results also show that the ion transmission efficiency reduces exponentially with an increased ion source current. Additionally, the ion loss due to space-charge effects has been found to be predominant at a higher ion source current, a lower capillary voltage, and a stronger cone gas counterflow. The interaction of the ion driving force, ion opposing force, and ion dispersion is discussed to illustrate ion transport mechanism in the ion source at atmospheric pressure. .

42 ENGINEERING↗

Optimizing the Operational Parameters of an Electrochemical Purification Cell for Corrosion Mitigation in CSP Plants During Operation: Preprint

To make concentrating solar power (CSP) cost-competitive, the next generation of CSP plants will increase efficiency by operating at a higher temperature, which will require a new thermal energy storage material. One option for the thermal energy storage material is a ternary chloride salt that is stable at the temperatures required, but reacts easily with the atmosphere to form MgOHCl, a corrosive impurity. If left unchecked, this impurity will corrode the containment alloys, potentially leading to dangerous spills. We are working to design an electrochemical purification cell to remove MgOHCl from the molten chloride salt during CSP plant operation. In this paper, we use predictive modeling to assess the rate at which purification must occur. Additionally, we analyze possible process flow pathways for the molten chloride salts. Ultimately, we determine that implementation of a single reactor through which all chloride salts flow is the most efficient design to reduce impurity concentration below 0.1 mol % impurity.

concentrating solar power↗

Solving the Hele–Shaw flow using the Harrow–Hassidim–Lloyd algorithm on superconducting devices: A study of efficiency and challenges

The development of quantum processors for practical fluid flow problems is a promising yet distant goal. Recent advances in quantum linear solvers have highlighted their potential for classical fluid dynamics. In this study, we evaluate the Harrow–Hassidim–Lloyd (HHL) quantum linear systems algorithm (QLSA) for solving the idealized Hele–Shaw flow. Our focus is on the accuracy and computational cost of the HHL solver, which we find to be sensitive to the condition number, scaling exponentially with problem size. This emphasizes the need for preconditioning to enhance the practical use of QLSAs in fluid flow applications. Moreover, we perform shots-based simulations on quantum simulators and test the HHL solver on superconducting quantum devices, where noise, large circuit depths, and gate errors limit performance. Error suppression and mitigation techniques improve accuracy, suggesting that such fluid flow problems can benchmark noise mitigation efforts. Finally, our findings provide a foundation for future, more complex application of QLSAs in fluid flow simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemically Initiated Tagging of Thiols Using an Electrospray Ionization-Based Liquid Microjunction Surface Sampling Probe Two-Electrode Cell

This paper reports on the conversion of a liquid microjunction surface sampling probe (LMJ-SSP) into a two electrode electrochemical cell using a conductive sample surface and the probe as the two electrodes with an appropriate battery powered circuit. With this LMJ-SSP, two-electrode cell arrangement, tagging of analyte thiol functionalities (in this case peptide cysteine residues) with hydroquinone tags was initiated electrochemically using a hydroquinone doped solution when the analyte either was initially in solution or was sampled from a surface. Efficient tagging (~90%), at flow rates of 5-10 L/min, could be achieved for up to at least two cysteines on a peptide. The high tagging efficiency observed was explained with a simple kinetic model. In general, the incorporation of a two-electrode electrochemical cell, or other multiple electrode arrangement, into the LMJ-SSP is expected to add to the versatility of this approach for surface sampling and ionization coupled with mass spectrometric detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Monte Carlo With Graph-Based Subsurface Flow and Transport Models

Simulating flow and transport in fractured porous media frequently involves solving numerical discretizations of partial differential equations with a large number of degrees of freedom using discrete fracture network (DFN) models. Uncertainty in the properties of the fracture network that controls flow and transport requires a large number of DFN simulations to statistically describe quantities of interest. However, the computational cost of solving more than a few realizations of a large DFN can be intractable. As a means of circumventing this problem, we utilize both a high-fidelity DFN model and a graphbased model of flow and transport in combination with a multifidelity Monte Carlo (MC) method to reduce the number of high-fidelity simulations that are needed to obtain an accurate estimate of the quantity of interest. We demonstrate the approach by estimating quantiles of the breakthrough time for a conservative tracer in an ensemble of fractured porous media. Our results demonstrate that a multifidelity MC estimate, whose computational cost is equal to the cost of 10 DFN simulations, can be as accurate as a standard MC estimate that utilizes 1,000 DFN simulations. Thus the combination of our graphbased model with multifidelity MC estimates effectively reduces the computational cost of the problem by a factor of approximately 100.

58 GEOSCIENCES↗

Test bed for a high throughput supersonic chemical oxygen - iodine laser

The paper reports the development of a test bed for a chemical oxygen - iodine laser based on a high throughput jet flow singlet oxygen generator (JSOG). The system provides vertical singlet oxygen extraction followed by horizontal orientation of subsequent subsystems. This design enables the study of flow complexities and engineering aspects of a distributed weight system as an input for mobile and other platform-mounted systems developed for large scale power levels. The system under consideration is modular and consists of twin SOGs, plenum and supersonic nozzle modules, with the active medium produced in the laser cavity. The maximal chlorine flow rate for the laser is {approx}1.5 mole s{sup -1} achieving a typical chemical efficiency of about 18%. (lasers)

42 ENGINEERING↗

An Efficient B-Spline Lagrangian/Eulerian Method for Compressible Flow, Shock Waves, and Fracturing Solids

This study presents a new method for modeling the interaction between compressible flow, shock waves, and deformable structures, emphasizing destructive dynamics. Extending advances in time-splitting compressible flow and the Material Point Methods (MPM), we develop a hybrid Eulerian and Lagrangian/Eulerian scheme for monolithic flow-structure interactions. We adopt the second-order WENO scheme to advance the continuity equation. To stably resolve deforming boundaries with sub-cell particles, we propose a blending treatment of reflective and passable boundary conditions inspired by the theory of porous media. The strongly coupled velocity-pressure system is discretized with a new mixed-order finite element formulation employing B-spline shape functions. Shock wave propagation, temperature/density-induced buoyancy effects, and topology changes in solids are unitedly captured.

97 MATHEMATICS AND COMPUTING↗

Pass-efficient methods for compression of high-dimensional turbulent flow data

The future of high-performance computing, specifically on future Exascale computers, will presumably see memory capacity and bandwidth fail to keep pace with data generated, for instance, from massively parallel partial differential equation (PDE) systems. Current strategies proposed to address this bottleneck entail the omission of large fractions of data, as well as the incorporation of in situ compression algorithms to avoid overuse of memory. To ensure that post-processing operations are successful, this must be done in a way that a sufficiently accurate representation of the solution is stored. Moreover, in situations where the input/output system becomes a bottleneck in analysis, visualization, etc., or the execution of the PDE solver is expensive, the number of passes made over the data must be minimized. In the interest of addressing this problem, this work focuses on the utility of pass-efficient, parallelizable, low-rank, matrix decomposition methods in compressing high-dimensional simulation data from turbulent flows. Additionally, a particular emphasis is placed on using coarse representation of the data – compatible with the PDE discretization grid – to accelerate the construction of the low-rank factorization. This includes the presentation of a novel single-pass matrix decomposition algorithm for computing the so-called interpolative decomposition. The methods are described extensively and numerical experiments on two turbulent channel flow data are performed. In the first (unladen) channel flow case, compression factors exceeding 400 are achieved while maintaining accuracy with respect to first- and second-order flow statistics. In the particle-laden case, compression factors of 100 are achieved and the compressed data is used to recover particle velocities. These results show that these compression methods can enable efficient computation of various quantities of interest in both the carrier and disperse phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗