Results for “flexible generation” — Page 17

NASA NTRS1990

Mission applications for advanced photovoltaic solar arrays

The suitability of the Advanced Photovoltaic Solar Array (APSA) for future space missions was examined by considering the impact on the spacecraft system in general. The lightweight flexible blanket array system was compared to rigid arrays and a radio-isotope thermoelectric generator (RTG) static power source for a wide range of assumed future earth orbiting and interplanetary mission applications. The study approach was to establish assessment criteria and a rating scheme, identify a reference mission set, perform the power system assessment for each mission, and develop conclusions and recommendations to guide future APSA technology development. The authors discuss the three selected power sources, the assessment criteria and rating definitions, and the reference missions. They present the assessment results in a convenient tabular format. It is concluded that the three power sources examined, APSA, conventional solar arrays, and RTGs, can be considered to complement each other. Each power technology has its own range of preferred applications.

Stella, Paul M.↗

NASA NTRS1991

The development of a program analysis environment for Ada: Reverse engineering tools for Ada

The Graphical Representations of Algorithms, Structures, and Processes for Ada (GRASP/Ada) has successfully created and prototyped a new algorithm level graphical representation for Ada software, the Control Structure Diagram (CSD). The primary impetus for creation of the CSD was to improve the comprehension efficiency of Ada software and thus improve reliability and reduce costs. The emphasis was on the automatic generation of the CSD from Ada source code to support reverse engineering and maintenance. The CSD has the potential to replace traditional prettyprinted Ada source code. In Phase 1 of the GRASP/Ada project, the CSD graphical constructs were created and applied manually to several small Ada programs. A prototype (Version 1) was designed and implemented using FLEX and BISON running under the Virtual Memory System (VMS) on a VAX 11-780. In Phase 2, the prototype was improved and ported to the Sun 4 platform under UNIX. A user interface was designed and partially implemented. The prototype was applied successfully to numerous Ada programs ranging in size from several hundred to several thousand lines of source code. In Phase 3 of the project, the prototype was prepared for limited distribution (GRASP/Ada Version 3.0) to facilitate evaluation. The user interface was extensively reworked. The current prototype provides the capability for the user to generate CSD from Ada source code in a reverse engineering mode with a level of flexibility suitable for practical application.

Cross, James H., II↗

NASA NTRS1995

Neural-Network Controller For Vibration Suppression

Neural-network-based adaptive-control system proposed for vibration suppression of flexible space structures. Controller features three-layer neural network and utilizes output feedback. Measurements generated by various sensors on structure. Feed forward path also included to speed up response in case plant exhibits predominantly linear dynamic behavior. System applicable to single-input single-output systems. Work extended to multiple-input multiple-output systems as well.

Boussalis, Dhemetrios↗

NASA NTRS2001

CAP: A Computer Code for Generating Tabular Thermodynamic Functions from NASA Lewis Coefficients

For several decades the NASA Glenn Research Center has been providing a file of thermodynamic data for use in several computer programs. These data are in the form of least-squares coefficients that have been calculated from tabular thermodynamic data by means of the NASA Properties and Coefficients (PAC) program. The source thermodynamic data are obtained from the literature or from standard compilations. Most gas-phase thermodynamic functions are calculated by the authors from molecular constant data using ideal gas partition functions. The Coefficients and Properties (CAP) program described in this report permits the generation of tabulated thermodynamic functions from the NASA least-squares coefficients. CAP provides considerable flexibility in the output format, the number of temperatures to be tabulated, and the energy units of the calculated properties. This report provides a detailed description of input preparation, examples of input and output for several species, and a listing of all species in the current NASA Glenn thermodynamic data file.

Zehe, Michael J.↗

NASA NTRS2002

CAP: A Computer Code for Generating Tabular Thermodynamic Functions from NASA Lewis Coefficients

For several decades the NASA Glenn Research Center has been providing a file of thermodynamic data for use in several computer programs. These data are in the form of least-squares coefficients that have been calculated from tabular thermodynamic data by means of the NASA Properties and Coefficients (PAC) program. The source thermodynamic data are obtained from the literature or from standard compilations. Most gas-phase thermodynamic functions are calculated by the authors from molecular constant data using ideal gas partition functions. The Coefficients and Properties (CAP) program described in this report permits the generation of tabulated thermodynamic functions from the NASA least-squares coefficients. CAP provides considerable flexibility in the output format, the number of temperatures to be tabulated, and the energy units of the calculated properties. This report provides a detailed description of input preparation, examples of input and output for several species, and a listing of all species in the current NASA Glenn thermodynamic data file.

Zehe, Michael J.↗

NASA NTRS2002

Transonic Wing Shape Optimization Using a Genetic Algorithm

A method for aerodynamic shape optimization based on a genetic algorithm approach is demonstrated. The algorithm is coupled with a transonic full potential flow solver and is used to optimize the flow about transonic wings including multi-objective solutions that lead to the generation of pareto fronts. The results indicate that the genetic algorithm is easy to implement, flexible in application and extremely reliable.

Holst, Terry L.↗

NASA NTRS2010

Sensing device with whisker elements

A sensing device includes an elongated whisker element having a flexible cantilever region and a base region where a change in moment or curvature is generated by bending of the cantilever region when it contacts an object. One or more sensor elements cooperatively associated with the whisker element provide one or more output signals that is/are representative of two orthogonal components of change in moment or curvature at the whisker base region to permit determination of object distance, fluid velocity profile, or object contour (shape) with accounting for lateral slip of the whisker element and frictional characteristics of the object. Multiple sensing devices can be arranged in arrays in a manner to sense object contour without or with adjustment for lateral slip.

Hartmann, Mitra J.↗

NASA NTRS2013

Sensing Device with Whisker Elements

A sensing device includes an elongated whisker element having a flexible cantilever region and a base region where a change in moment or curvature is generated by bending of the cantilever region when it contacts an object. One or more sensor elements cooperatively associated with the whisker element provide one or more output signals that is/are representative of two orthogonal components of change in moment or curvature at the whisker base region to permit determination of object distance, fluid velocity profile, or object contour (shape) with accounting for lateral slip of the whisker element and frictional characteristics of the object. Multiple sensing devices can be arranged in arrays in a manner to sense object contour without or with adjustment for lateral slip.

Hartmann, Mitra J.↗

NASA NTRS2020

MEXEC: An Onboard Integrated Planning and Execution Approach for Spacecraft Commanding

The traditional form of spacecraft commanding is with sequences that specify when commands should execute based on a schedule generated on the ground. Some sequences have control logic and event driven responses to increase flexibility, but it is limited. An approach to increase autonomy is to use goal-based planning and commanding. Using this paradigm, intention and behavior is modeled on board the spacecraft. In this paper we describe MEXEC (Multi-mission EXECutive), a multi-mission, task-based, onboard planning and execution software designed specifically to be used as flight software. As a path to infusion for future flight projects, we describe two experiments performed on the ASTERIA CubeSat and testbed that demonstrate that MEXEC can be integrated and used for spacecraft operations and increase robustness and science return compared to the standard sequences that were being used.

Campuzano, Brian↗

NASA NTRSDate not supplied

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

NASA NTRSDate not supplied

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

NASA NTRS2023

Recent Progress in Extreme Environment Durable SiC JFET-R Integrated Circuit Technology

This work updates recent progress made by NASA Glenn Research Center on further advancement of its uniquely durable silicon carbide junction field effect transistor and resistor (SiC JFET-R) integrated circuit (IC) technology since HiTEC 2021. Key fabrication process improvements compared to earlier NASA Glenn IC prototype runs have been ascertained via extensive “back end of line” (BEOL) processing experiments conducted on practice wafers over the past two years. The resulting changes to the BEOL process flow employed in the fabrication of “Generation 12” SiC JFET-R wafers are described. The NASA Glenn SiC JFET-R IC prototype “Generation 12” chipset design realizes significantly higher complexity digital and analog integrated ICs aimed at flexibly implementing a broad variety of mission-enabling extreme-environment electronics demonstrations. SPICE simulations have verified circuit designs ranging from simple amplification of analog sensor signals up through long-duration Venus lander operations and microprocessor-based of electric motor drive.

Silicon Carbide↗

NASA NTRS1994

Production and quality assurance automation in the Goddard Space Flight Center Flight Dynamics Facility

The Flight Dynamics Facility (FDF) at the NASA Goddard Space Flight Center (GSFC) generates numerous products for NASA-supported spacecraft, including the Tracking and Data Relay Satellites (TDRS's), the Hubble Space Telescope (HST), the Extreme Ultraviolet Explorer (EUVE), and the space shuttle. These products include orbit determination data, acquisition data, event scheduling data, and attitude data. In most cases, product generation involves repetitive execution of many programs. The increasing number of missions supported by the FDF has necessitated the use of automated systems to schedule, execute, and quality assure these products. This automation allows the delivery of accurate products in a timely and cost-efficient manner. To be effective, these systems must automate as many repetitive operations as possible and must be flexible enough to meet changing support requirements. The FDF Orbit Determination Task (ODT) has implemented several systems that automate product generation and quality assurance (QA). These systems include the Orbit Production Automation System (OPAS), the New Enhanced Operations Log (NEOLOG), and the Quality Assurance Automation Software (QA Tool). Implementation of these systems has resulted in a significant reduction in required manpower, elimination of shift work and most weekend support, and improved support quality, while incurring minimal development cost. This paper will present an overview of the concepts used and experiences gained from the implementation of these automation systems.

Chapman, K. B.↗

NASA NTRS1993

Integrated flexible manufacturing program for manufacturing automation and rapid prototyping

The Kansas City Division of Allied Signal Inc., as part of the Integrated Flexible Manufacturing Program (IFMP), is developing an integrated manufacturing environment. Several systems are being developed to produce standards and automation tools for specific activities within the manufacturing environment. The Advanced Manufacturing Development System (AMDS) is concentrating on information standards (STEP) and product data transfer; the Expert Cut Planner system (XCUT) is concentrating on machining operation process planning standards and automation capabilities; the Advanced Numerical Control system (ANC) is concentrating on NC data preparation standards and NC data generation tools; the Inspection Planning and Programming Expert system (IPPEX) is concentrating on inspection process planning, coordinate measuring machine (CMM) inspection standards and CMM part program generation tools; and the Intelligent Scheduling and Planning System (ISAPS) is concentrating on planning and scheduling tools for a flexible manufacturing system environment. All of these projects are working together to address information exchange, standardization, and information sharing to support rapid prototyping in a Flexible Manufacturing System (FMS) environment.

Brooks, S. L.↗

NASA NTRSDate not supplied

Building Maps for Terrain Relative Navigation Using Blender: An Open-Source Approach

A persistent challenge for vision-based navigation systems that compare imagery to a reference map is generating high quality maps with similar lighting conditions. Image rendering software can be used to apply variable lighting to reference maps or to generate synthetic imagery for test trajectories. While many image rendering software packages are available, with several developed specifically for spaceflight applications, there are often limitations due to cost, image fidelity, or flexibility. In this paper, we demonstrate the use of an open-source image rendering software, Blender, for use in Terrain Relative Navigation (TRN) applications. A scene in Blender was generated based on elevation data and satellite imagery of the region of West Texas used by Blue Origin for the operation of their New Shepard suborbital rocket. The Blender scene was validated by reproducing imagery collected during a flight of New Shepard in October 2020 and was further used to generate reference maps for use by a TRN algorithm on a subsequent New Shepard flight in August 2021. The work was performed under the NASA Safe and Precise Landing Integrated Capabilities Evolution (SPLICE) project, which is focused on technology advancement for precision landing and hazard avoidance. This work aims to lower the cost of entry and generally promote the adoption and advancement of vision-based navigation technologies.

Kyle W Smith↗

NASA NTRS2014

Static Aeroelastic and Longitudinal Trim Model of Flexible Wing Aircraft Using Finite-Element Vortex-Lattice Coupled Solution

This paper presents a static aeroelastic model and longitudinal trim model for the analysis of a flexible wing transport aircraft. The static aeroelastic model is built using a structural model based on finite-element modeling and coupled to an aerodynamic model that uses vortex-lattice solution. An automatic geometry generation tool is used to close the loop between the structural and aerodynamic models. The aeroelastic model is extended for the development of a three degree-of-freedom longitudinal trim model for an aircraft with flexible wings. The resulting flexible aircraft longitudinal trim model is used to simultaneously compute the static aeroelastic shape for the aircraft model and the longitudinal state inputs to maintain an aircraft trim state. The framework is applied to an aircraft model based on the NASA Generic Transport Model (GTM) with wing structures allowed to flexibly deformed referred to as the Elastically Shaped Aircraft Concept (ESAC). The ESAC wing mass and stiffness properties are based on a baseline "stiff" values representative of current generation transport aircraft.

Aeroelasticity↗

NASA NTRS1980

Simulation and visualization of face seal motion stability by means of computer generated movies

A computer aided design method for mechanical face seals is described. Based on computer simulation, the actual motion of the flexibly mounted element of the seal can be visualized. This is achieved by solving the equations of motion of this element, calculating the displacements in its various degrees of freedom vs. time, and displaying the transient behavior in the form of a motion picture. Incorporating such a method in the design phase allows one to detect instabilities and to correct undesirable behavior of the seal. A theoretical background is presented. Details of the motion display technique are described, and the usefulness of the method is demonstrated by an example of a noncontacting conical face seal.

Etsion, I.↗

NASA NTRS1981

Simulation and visualization of face seal motion stability by means of computer generated movies

A computer aided design method for mechanical face seals is described. Based on computer simulation, the actual motion of the flexibly mounted element of the seal can be visualized. This is achieved by solving the equations of motion of this element, calculating the displacements in its various degrees of freedom vs. time, and displaying the transient behavior in the form of a motion picture. Incorporating such a method in the design phase allows one to detect instabilities and to correct undesirable behavior of the seal. A theoretical background is presented. Details of the motion display technique are described, and the usefulness of the method is demonstrated by an example of a noncontacting conical face seal.

Etsion, I.↗