Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feature fusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Quasi-monoenergetic ion acceleration and neutron generation from laser-driven transverse collisionless shocks

Experiments using the OMEGA EP laser system were performed to study collisionless shock acceleration of ions driven by the interaction of a relativistically intense laser pulse with underdense plasma. The energy spectrum of accelerated ions in the direction transverse to laser propagation is measured to have several narrow-band peaks which are quasi-monoenergetic with a typical energy bandwidth of 3%. In deuterium plasmas, these ions generate a significant number of fast fusion neutrons. Particle-in-cell simulations confirm that these ions were accelerated by the interaction of transverse shocks and that the appearance of quasi-monoenergetic spectral features depends on the growth of an ion-electron two-stream instability during the interaction.

Kordell, P. (ORCID:0000000321456317)↗
DOE OSTI2026

Spontaneously Broken Noninvertible Symmetries in Transverse-Field Ising Qudit Chains

Recent developments have revealed that symmetries need not form a group, but instead can be noninvertible. Here we use analytical arguments and numerical evidence to illuminate how spontaneous symmetry breaking of a noninvertible symmetry is similar yet distinct from ordinary, invertible, symmetry breaking. We consider one-dimensional chains of group-valued qudits, whose local Hilbert space is spanned by elements of a finite group 𝐺 (reducing to ordinary qubits when 𝐺=ℤ 2 ). We construct Ising-type transverse-field Hamiltonians with Rep⁡(𝐺) symmetry whose generators multiply according to the tensor product of irreducible representations (irreps) of the group 𝐺 . For non-Abelian 𝐺 , the symmetry is noninvertible. In the symmetry broken phase there is one ground state per irrep on a closed chain. The symmetry breaking can be detected by local order parameters but, unlike the invertible case, different ground states have distinct entanglement patterns. We show that for each irrep of dimension greater than one the corresponding ground state exhibits string order, entanglement spectrum degeneracies, and has gapless edge modes on an open chain—features usually associated with symmetry-protected topological order. Consequently, domain wall excitations behave as one-dimensional non-Abelian anyons with nontrivial internal Hilbert spaces and fusion rules. Our Letter identifies properties of noninvertible symmetry breaking that existing quantum hardware can probe.

1-dimensional spin chains↗
DOE OSTI2023

A Graphical Model for Fusing Diverse Microbiome Data

This paper develops a Bayesian graphical model for fusing disparate types of count data. The motivating application is the study of bacterial communities from diverse high-dimensional features, in this case, transcripts, collected from different treatments. In such datasets, there are no explicit correspondences between the communities and each corresponds to different factors, making data fusion challenging. We introduce a flexible multinomial-Gaussian generative model for jointly modeling such count data. This latent variable model jointly characterizes the observed data through a common multivariate Gaussian latent space that parameterizes the set of multinomial probabilities of the transcriptome counts. The covariance matrix of the latent variables induces a covariance matrix of co-dependencies between all the transcripts, effectively fusing multiple data sources. We present a computationally scalable variational Expectation-Maximization (EM) algorithm for inferring the latent variables and the parameters of the model. Here, the inferred latent variables provide a common dimensionality reduction for visualizing the data and the inferred parameters provide a predictive posterior distribution. In addition to simulation studies that demonstrate the variational EM procedure, we apply our model to a bacterial microbiome dataset.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Construction of 3D MHD pressure drop correlation and flow characterization in the contraction region of a fusion blanket manifold

Inlet and outlet manifolds are typical components of liquid metal (LM) blanket designs of a fusion power reactor to be used to distribute the LM flow into breeding channels and collect it at the exit of the blanket. High pressure loss in the magnetohydrodynamic (MHD) flows featuring abrupt geometrical changes is one of the main feasibility issues of such designs. Recently, optimization studies were conducted to construct 3D MHD pressure drop correlations for a LM flow in an electrically insulating manifold with gradual expansion. Here, the 3D computational approach developed in that study is applied to the outlet manifold featuring gradual contraction. A systematic analysis was performed with a total number of 135 flow cases computed with COMSOL Multiphysics for Hartmann numbers 1000 < Ha < 10,000, Reynolds numbers 100 < Re < 12,000, and contraction angles 45° < θ < 75° for a fixed contraction ratio of 4. The effects of Ha, Re and θ on the flow recirculation, development length and the total pressure drop were carefully examined. A linear regression analysis was used to determine the power rule of pressure drop coefficient k related to Ha and Re, demonstrating a good match with the Ludford layer theory. Eventually, a correlation for the 3D MHD pressure drop coefficient was constructed as a function of Ha, Re and θ. Further, the results were compared against the inlet manifold. It was found that the flow in the inlet manifold exhibits larger recirculation zones. In the investigated range of Ha, Re and θ, the pressure drop coefficient k of the LM MHD flow in the gradual contraction is only slightly lower (< 8 %) than that in the gradual expansion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Correlations between thermal history and keyhole porosity in laser powder bed fusion

Additive manufacturing has the potential to revolutionize the production of metallic components as it yields near net shape parts with complex geometries and minimizes waste. At the present day, additively manufactured components face qualification and certification challenges due to the difficulty in controlling defects. This has driven a significant research effort aimed at better understanding and improving processing controls – yielding a plethora of in-situ measurements aimed at correlating defects with material quality metrics of interest. In this work, we develop machine-learning methods to learn correlations between thermal history and subsurface porosity for a variety of print conditions in laser powder bed fusion. Un-normalized surface temperatures (in the form of black-body radiances) are obtained using high-speed infrared imaging and porosity formation is observed in the sample cross-section through synchrotron x-ray imaging. To demonstrate the predictive power of these features, we present four statistical machine-learning models that correlate temperature histories to subsurface porosity formation in laser fused Ti-6Al4V powder.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Method for Rapid Modeling of Distortion in Laser Powder Bed Fusion Metal Additive Manufacturing Parts

The simulation and modeling of part-level distortion and residual stress in diverse metal additive manufacturing (AM) geometries has great potential to enable the rapid adoption of this technology in engineering design. Moreover, the use of additive manufacturing component libraries (CLs) offer a computationally efficient means of quantifying these part-level defects resultant from AM processing. We report on how the individual simulations of simple shapes, potential entries in a CL, can be superimposed to provide an indication of distortion and residual stresses in complex geometries. Laser powder bed fusion AM was used to construct test geometries of varied shapes and their combinations in the form of CLs in an effort to characterize location-dependent and feature-dependent distortion distributions. Blue light scanning was used to experimentally measure 3D distortions in order to investigate the interaction between the component shapes and local boundary conditions. Overall, part-level distortions were highly dependent on test component geometry, local boundary conditions, and shape combination. Commercial finite element software was used to verify experimental trends and to make predictions of distortion. The use of CLs resulted in over 20 times savings in computational cost while reproducing overall trends in distortion for test geometry assemblies. Therefore, it is anticipated that the use of CLs for L-PBF AM geometries has demonstrated potential to facilitate efficient simulations of full component AM assemblies, thereby reducing the need for costly trial-and-error-type experimental analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deep Koopman Neural Network for Analyzing High-Energy-Density Simulations of Electrical Wire Explosions

Megaampere-scale electrical wire experiments (EWEs) provide a platform for studying magnetohydrodynamic (MHD) instability growth in magneto-inertial fusion (MIF) devices. Even when nonlinear simulations of these experiments can digitally reproduce much of the experimentally observed instability growth, interpreting the results and understanding mode growth and evolution can be non-trivial. As a first step toward providing better interpretation of these simulation features, this work investigates the use of a deep neural network that uses Koopman operator theory to analyze the dynamics of pulsed-power-driven explosions of EWEs. This deep neural network is trained on 1-D resistive MHD simulations of EWEs. This neural network learns to transform the nonlinear data into a lower-dimensional representation where the time dynamics are linear. Layers of this neural network are shown to learn features of the simulations, including the locations of shock waves and different physical regimes of the simulation. Using the learned features, the network can compress a time state of the simulation consisting of 5120 data point into a 36-parameter lower-dimensional latent space embedding. Furthermore, these embeddings are shown to be clustered in the latent space by initial radius and time state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Study of x-ray fluorescence spectroscopy from high-energy-density plasmas (Final Report)

The primary objective of this subcontract was to support the development of x-ray fluorescence spectroscopy (XFS) as a diagnostic tool for high-energy-density (HED) plasmas. Several experimental campaigns were completed to develop and benchmark XFS at various plasmas conditions of interest for inertial confinement fusion and HED science. The experimental measurements at the Omega laser facility used x-ray absorption spectroscopy (XAS) to determine the plasma temperature from the shape of the K-edge to benchmark XFS data. During the course of these experiments, it was found that XAS can also constrain ionization from bound-bound absorption features, and it became a primary diagnostic in this study. Several experimental campaigns were conducted at the Omega laser facility to refine XAS and XFS measurements of warm dense copper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling

Abstract Surface roughness present on internal cooling channels produced with additive manufacturing has been previously shown to augment heat transfer and pressure loss to levels similar to traditionally cast turbulators. Given the ability of the surface roughness to improve the cooling performance of small cooling channels, the question arises on whether there is an optimal combination of random roughness features to maximize internal cooling performance. To investigate this question, test coupons with different surface roughness morphologies and magnitudes were manufactured by manipulating the parameters in the laser powder bed fusion additive manufacturing process. The coupons were tested to characterize the friction factor and Nusselt number of the cooling channels over a range of Reynolds numbers. Results showed that certain roughness combinations outperformed others, increasing the internal cooling performance of the channels. Additionally, manipulation of the performance using the process parameters allowed for reductions in build time, which could be useful for controlling component cost.

Engineering↗
NASA NTRS1989

Introduction to D-He(3) fusion reactors

A review and evaluation of D-He(3) fusion reactor technology is presented. The advantages and disadvantages of the D-He(3) and D-T reactor cycles are outlined and compared. In addition, the general design features of D-He(3) tokamaks and field reversed configuration (FRC) reactors are described and the relative merits of each are compared. It is concluded that both tokamaks and FRC's offer certain advantages, and that the ultimate decision as to which to persue for terrestrial power generation will depend heavily on how the physics performance of each of them develops over the next few years. It is clear that the D-He(3) fuel cycle offers marked advantages over the D-T cycle. Although the physics requirements for D-He(3) are more demanding, the overwhelming advantages resulting from the two order of magnitude reduction of neutron flux are expected to lead to a shorter time to commercialization than for the D-T cycle.

Vlases, G. C.↗
NASA NTRS1992

Distributed optical proximity sensor system - HexEYE

A novel optical proximity sensor system, capable of measuring the distance to the orientation and the discontinuity at a local area of an object surface, was designed and evaluated for robotic applications. The sensor system gets its name, Hexagonal Eye, (HexEYE) from its shape where seven identical hexagonal sensing units were configured hexagonally into a compact geometric structure. The seven sensing units were grouped into multiple combinations of three sensing units to measure the surface orientation as well as surface discontinuity. The distinctive features of HexEYE are an order of magnitude increased in distance sensitivity by optimizing the curvature of a conical mirror, the enhanced measurement accuracy based on multiple levels of sensor fusion, and the compactness in size due to a sensing mechanism based on the Gaussian lens law. A prototype of single sensing unit has been built and was evaluated experimentally.

Lee, Sukhan↗
DOE OSTI2023

Corrosion testing needs and considerations for additively manufactured materials in nuclear reactors

Metal additive manufacturing holds significant promise as an enabling technology for the 21st century nuclear energy industry. Metal additive manufacturing (MAM) can allow the fabrication of novel materials and innovative component designs that are not achievable through conventional manufacturing. Due to its very different fabrication methods, as-fabricated MAM components are characteristically different from conventionally manufactured components. MAM materials exhibit very different microstructures from conventional cast or wrought materials. For example, austenitic stainless steels fabricated by laser powder bed fusion exhibit columnar grain structures, dislocation cell structures, and melt pool fingerprints. In addition, MAM fabrication may result in defects such as porosity, incomplete processing of the feedstock (e.g., lack of fusion in melt-based methods), and oxide inclusions. Heat treatments may further evolve the microstructure, microsegregation, and stresses within the component. Furthermore, MAM components have a rough surface with feature sizes on the order of the feedstock material, as opposed to smooth surfaces resulting from conventional machining and forming operations. As a result, the corrosion behavior of MAM components will likely be significantly different from that of conventionally formed components. Corrosive environments for structural materials within advanced reactor environments include molten fluoride and chloride salts, liquid sodium and lead-bismuth, and high-temperature helium. The Advanced Materials and Manufacturing Technologies program within the Department of Nuclear Energy in the United States Department of Energy is assessing the unique concerns of MAM component corrosion and testing methodologies in advanced nuclear reactor environments. We discuss these concerns and testing strategies in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1991

Fusion energy for space missions in the 21st century: Executive summary

Future space missions were hypothesized and analyzed, and the energy source of their accomplishment investigated. The missions included manned Mars, scientific outposts to and robotic sample return missions from the outer planets and asteroids, as well as fly-by and rendezvous missions with the Oort Cloud and the nearest star, Alpha Centauri. Space system parametric requirements and operational features were established. The energy means for accomplishing missions where delta v requirements range from 90 km/sec to 30,000 km/sec (High Energy Space Mission) were investigated. The need to develop a power space of this magnitude is a key issue to address if the U.S. civil space program is to continue to advance as mandated by the National Space Policy. Potential energy options which could provide the propulsion and electrical power system and operational requirements were reviewed and evaluated. Fusion energy was considered to be the preferred option and was analyzed in depth. Candidate fusion fuels were evaluated based upon the energy output and neutron flux. Additionally, fusion energy can offer significant safety, environmental, economic, and operational advantages. Reactors exhibiting a highly efficient use of magnetic fields for space use while at the same time offering efficient coupling to an exhaust propellant or to a direct energy convertor for efficient electrical production were examined. Near term approaches were identified. A strategy that will produce fusion powered vehicles as part of the space transportation infrastructure was developed. Space program resources must be directed toward this issue as a matter of the top policy priority.

Schulze, Norman R.↗
DOE OSTI2023

Physics of the thermal quench in MST tokamak plasmas (Final Technical Report)

This project at the University of Wisconsin-Madison targeted measurements in tokamak plasmas in the Madison Symmetric Torus (MST) to help elucidate the physics of the tokamak disruption. We intended to focus on the thermal quench, during which energy is lost from the plasma in a very short time. Understanding and ultimately mitigating the thermal quench are among the highest priority research thrusts for ITER, a large international fusion experiment presently under construction. The measurements in MST exploited an advanced set of diagnostics for internal measurements with high time resolution, targeting linear and nonlinear magnetohydrodynamic (MHD) activity as well as the electron temperature and density profiles. We also exploited other features of the MST device, including very flexible power supplies for the toroidal magnetic field and toroidal plasma current that are capable of producing almost arbitrary waveforms. While the work funded by this project was purely experimental, we continued and expanded an existing collaboration with UW-Madison experts in nonlinear MHD computational modeling of tokamak plasmas. That modeling incorporated realistic, experimentally measured parameters. The results of the modeling were anticipated to deepen considerably our understanding of the experimental measurements, and in turn, the experimental measurements were anticipated to help validate the modeling results. The science of transients such as disruptions is one of the highest priority research areas in the U.S. and international fusion programs. The work carried out in this project was targeted to help advance the science of tokamak disruptions which will in turn contribute to the success of ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

MX precipitate behavior in an irradiated advanced Fe-9Cr steel: Self-ion irradiation effects on phase stability

In an effort to optimize Fe-9Cr reduced activation ferritic/martensitic (RAFM) steels and to inform the design and operation of fusion reactors, this work represents the first in a series of cohesive studies dedicated to the evolution of MX-TiC precipitates under accelerated single and dual ion irradiations. This study investigates CNA9, a simplified Fe-9Cr RAFM steel featuring initial MX-TiC precipitate densities of (2.3±0.3)×10²¹ m⁻³. This material was subjected to single self-ion irradiation at damage levels ranging from 1 to 100 displacements per atom (dpa) over a temperature range of 300 to 600°C, with a nominal dose rate of 7×10⁻⁴ dpa/s. Irradiation-induced coarsening was observed, as evidenced by statistically significant increases in mean diameter sizes, at 15 dpa at both 500°C and 600°C, whereas no coarsening was noted at 300°C or 400°C. Further, complete dissolution of precipitates occurred at damage levels of 50 and 100 dpa across the two temperatures tested (300°C and 500°C) while no significant changes were observed at any doses below 15 dpa at 500°C. Experimentally parameterized recoil resolution modeling suggests that the observed radiation stability of MX-TiC precipitates is intricately linked to diffusional changes of solutes resulting from the co-evolution of microstructural features within the experiments. The findings align with current theoretical perspectives on radiation-induced precipitate stability in complex alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Machine Developing a Transferable Framework for CO2-Stimulated Geothermal Energy Enhancement: A Case Study

Poster presented at the 17th International Conference on Greenhouse Gas Control Technologies GHGT-17 held in Calgary, Canada, October 20-24, 2024. In this poster, we present innovative technologies to image key features, including CO₂-stimulated fracture imaging, CO₂ fluid sweep imaging and heat transfer and exchange imaging by leveraging multiple datasets and applying advanced AI/ML, multi-level data analytics, and data/information fusion to better understand the geothermal reservoir for enhanced recovery.

Liu, Guoxiang↗
DOE OSTI2024

Developing a Transferable Framework for CO2-Stimulated Geothermal Energy Enhancement: A Case Study

This is the conference paper accompanying a poster presentation at the 17th International Conference on Greenhouse Gas Control Technologies GHGT-17 held in Calgary, Canada, October 20-24, 2024. In this paper, we present innovative technologies to image key features, including CO₂-stimulated fracture imaging, CO₂ fluid sweep imaging and heat transfer and exchange imaging by leveraging multiple datasets and applying advanced AI/ML, multi-level data analytics, and data/information fusion to better understand the geothermal reservoir for enhanced recovery.

Liu, Guoxiang↗
DOE OSTI2024

Impact of strong magnetization in cylindrical plasma implosions with applied B-field measured via x-ray emission spectroscopy

Magnetization is a key strategy for enhancing inertial fusion performance, though accurate characterization of magnetized dense plasmas is needed for a better comprehension of the underlying physics. Measured spectra from imploding Ar-doped D 2 -filled cylinders at the OMEGA laser show distinctive features with and without an imposed magnetic field. A multizone spectroscopic diagnosis leads to quantitative estimates of the plasma conditions, namely revealing a 50% core temperature rise at half mass density when a 30-T seed field is applied. Concurrently, experimental spectra align well with predictions from extended-magnetohydrodynamics simulations, providing strong evidence that the attained core conditions at peak compression are consistent with the impact of a 10-kT compressed field. These results pave the way for the validation of magnetized transport models in dense plasmas and for future magnetized laser implosion experiments at a larger scale. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗