Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “faces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Comprehensive new insights on the potential use of SiC as plasma-facing materials in future fusion reactors

Abstract The performance of silicon carbide as an alternative plasma facing material (PFM) was studied at various irradiation conditions relevant to ion energies and fluxes of a fusion reactor. This analysis involves detailed modeling of subsurface plasma/material interactions, sputtered particle transport above the surface and redeposition, and related changes in material composition and microstructure induced by steady-state and Edge Localized Mode ion fluxes. Transition of a crystalline SiC surface to semi-crystalline and amorphous phases was analyzed based on advanced modeling of DIII-D tokamak experiments where SiC was irradiated in single- and multiple- L-mode and H-mode discharges. This analysis shows that displacement damage, particle deposition/redeposition, and D accumulation on the SiC divertor surface can lead to significant microstructural changes that result in enhanced sputtering erosion in comparison with the original crystalline material. However, the resulting total net erosion rate for a full-coverage, advanced tokamak, SiC coated divertor may well be acceptably low. Moreover, the C sputtering yield from the evolved SiC surface can be seven times lower than from a pure graphite surface; this would imply significantly reduced tritium co-deposition rates in a D-T tokamak reactor, compared with a pure carbon surface. It was also determined that chemical sputtering of both C and Si should not result in any noticeable effect on the net erosion, for attached plasma regimes. Our results thus show encouraging results overall for use of SiC as a PFM in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A study of outer disc stellar populations of face-on star-forming galaxies in SDSS-IV MaNGA: causes of H α deficiency

ABSTRACT Integral field unit spectra of face-on star-forming galaxies from the MaNGA survey are stacked in radial bins so as to reach an S/N high enough to measure emission lines and Lick indices out to 2.5–3Re. Two-thirds of galaxies have stellar populations in the outer discs that are older, more metal poor, and less dusty than in the inner discs. Recent bursts of star formation have occurred more frequently in the outer disc, but extinction-corrected H α equivalent widths are significantly lower at fixed Dn(4000) in these regions. I examine the properties of a subset of galaxies with the most H α-deficient outer discs. These regions contain young stellar populations that must have formed within the last 0.5 Gyr, but have extinction-corrected H α values well below the values predicted for a standard Kroupa initial mass function. The H α-deficient galaxies have flat Dn(4000) and H δA profiles with little radial fluctuation, indicating that star formation has occurred extremely uniformly across the entire disc. The H α line profiles indicate that the ionized gas kinematics is also very regular across the disc. The main clue to the origin of the H α deficiency is that it sets in at the same radius where the dust extinction abruptly decreases, suggesting a mode of star formation deficient in massive stars in quiescent, H i-dominated gas. Finally, I have carried out a search for galaxies with signatures of unusual H α kinematics and find that 15 per cent of the sample exhibits evidence for significant ionized gas that is displaced from the systemic velocity of the disc.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

SDSS IV MaNGA - star-formation driven biconical outflows in face-on galaxies

ABSTRACT We find 132 face-on and low inclination galaxies with central star formation driven biconical gas outflows (FSFB) in the SDSS MaNGA (Mapping Nearby Galaxies at APO) survey. The FSFB galaxies show either double peaked or broadened emission line profiles at their centres. The peak and maximum outflow velocities are 58 and 212 km s−1, respectively. The gas velocity dispersion reveals a mild dependence on the central star formation surface density compatible with models of gas dispersion powered by the Jeans instability in gas clumps or by gas turbulence dissipation. We estimate the gas outflow rate and conclude that the central gas depletion time does not depend on galactic mass. In turn, the ratio of the gas outflow rate to the gas consumption rate by the star formation is low in massive galaxies and high in low mass objects, while the star formation is a more rapid process of the gas consumption. We compare properties of the FSFB galaxies with a control sample of 375 comparison galaxies and find that the FSFB objects have high central concentration of star formation and also younger central stellar population with respect to their periphery. We analysed the environment of the galaxies and identified nearby satellites and elements of low surface brightness structure. We see that many tidal-enhanced features that can be assigned to early and intermediate stages of galactic interaction are much more frequent in the FSFB galaxies with respect to the comparison sample. We conclude that the gas should be replenished via the accretion from small satellites.

Bizyaev, D. (ORCID:000000023601133X)↗
DOE OSTI2024

Boron carbide films with reduced nodular defect density deposited by full-face erosion radio-frequency magnetron sputtering

Boron carbide coatings deposited by sputtering with conventional planar magnetrons exhibit nodular growth defects. Here, we demonstrate that the density of nodular defects in B 4 C films can be greatly reduced by using a full-face-erosion magnetron source that achieves a more uniform target erosion by sweeping the confining magnetic field over the target surface. Here, we systematically study properties of B 4 C films deposited on substrates with different tilt angles and demonstrate deposition of ultrathick films with compressive residual stress below 200MPa.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Decoding the interstitial/vacancy nature of dislocation loops with their morphological fingerprints in face-centered cubic structure

Dislocation loops are critical defects inducing detrimental effects like embrittlement and swelling in materials under irradiation. Distinguishing their nature (interstitial- or vacancy-type) is a long-standing challenge with great implications for understanding radiation damage. Here, we demonstrate that the morphology of radiation-induced Frank loops can unveil their nature in face-centered cubic (fcc) structure: Circular loops are interstitial-type in all fcc materials, while segmented loops are vacancy-type in high stacking fault energy (SFE) alloys but varied-type in low SFE and high-entropy alloys. The polygonal shape is attributed to the dissociation of an a 0 /3<111> dislocation into an a 0 /6<112> Shockley partial and an a 0 /6<110> stair-rod dislocation. The dissociation of vacancy loops is energetically favorable, whereas interstitial loops require external stimuli to promote dislocation propagation. This “morphology-nature” correlation not only highlights the asymmetry of vacancy/interstitial loops but also offers an efficient way to distinguish loop nature for a wide range of materials.

Ma, Kan [City Univ. of Hong Kong, Kowloon (Hong Ko↗
DOE OSTI2021

A software package for plasma facing component analysis and design: the Heat flux Engineering Analysis Toolkit (HEAT)

The engineering limits of plasma facing components (PFCs) constrain the allowable operational space of tokamaks. Poorly managed heat fluxes that push the PFCs beyond their limits not only degrade core plasma performance via elevated impurities, but can also result in PFC failure due to thermal stresses or melting. Simple axisymmetric assumptions fail to capture the complex interaction between 3D PFC geometry and 2D or 3D plasmas. This results in fusion systems that must either operate with increased risk or reduce PFC loads, potentially through lower core plasma performance, to maintain a nominal safety factor. High precision 3D heat flux predictions are necessary to accurately ascertain the state of a PFC given the evolution of the magnetic equilibrium. A new code, the Heat flux Engineering Analysis Toolkit (HEAT), has been developed to provide high precision 3D predictions and analysis for PFCs. HEAT couples many otherwise disparate computational tools together into a single open source python package. Magnetic equilibrium, engineering CAD, finite volume solvers, scrape off layer plasma physics, visualization, high performace computing, and more, are connected in a single web-based user interface. Linux users may use HEAT without any software prerequisites via an appImage. This manuscript introduces HEAT, discusses the software architecture, presents first HEAT results, and outlines physics modules in development.

divertor physics↗
DOE OSTI2021

Soil moisture and temperature data along the northeast facing hillslope at the Lower Montane site in the East River Watershed, Colorado

Soil moisture, temperature and electrical conductivity have been monitored with 5TE sensors (Decagon Inc.) located at 10 and 50 cm depth at 4 different locations along the northeast-facing slope at the Lower Montane site in the East River Watershed, Colorado from Oct 2016 to Oct 2018. The purpose of this data is to inform hydrobiogeochemical analyses for the Watershed Function Scientific Focus Area (SFA). The data is reported in 4 csv files labeled their by location identifiers (ER-SMN1-5) and location metadata is provided in SM_loc.csv. These data products are part of the Watershed Function Scientific Focus Area collection effort to further scientific understanding of biogeochemical dynamics from genome to watershed scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Commuting again to work on-site? Lab’s first drivers faced their own challenges decades ago

After a long pause in commuting, more and more Lab staff are filling travel mugs, topping off their tanks, and heading up the hill for on-site work. As long as the Lab has existed, workers have snaked through tight mountain roads to get to their jobs. And, back in the early 1940s, drivers faced even more challenges. In the Lab’s earliest years, drivers likely worried about getting stuck in the mud, navigating intense switchbacks, or making sure important equipment, such as a disassembled power plant, didn’t fall off the back of the truck that was hauling it. Creative solutions could go a long way to get out of a jam. As many of us return onsite and get reacquainted with commuting, we look back at how transportation has changed since the Manhattan Project, the U.S. government’s top secret effort at Los Alamos to create the first atomic bombs to help end World War II. These stories and photos are part of the collections in the National Security Research Center, which is the Lab’s classified library and also houses unclassified artifacts from our past.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2022

Assessment of Sandia's 2021 Pilot Program for Research Traineeships to Broaden and Diversify Fusion Energy Science: Development and Rapid Screening of Refractory Multi-Principal Elemental Composites for Plasma Facing Components

The Fusion Energy Sciences office supported “A Pilot Program for Research Traineeships to Broaden and Diversify Fusion Energy Sciences” at Sandia National Laboratories during the summer of 2021. This pilot project was motivated in part by the Fusion Energy Sciences Advisory Committee report observation that “The multidisciplinary workforce needed for fusion energy and plasma science requires that the community commit to the creation and maintenance of a healthy climate of diversity, equity, and inclusion, which will benefit the community as a whole and the mission of FES”. The pilot project was designed to work with North Carolina A&T (NCAT) University and leverage SNL efforts in FES to engage underrepresented students in developing and accessing advanced material solutions for plasma facing components in fusion systems. The intent was to create an environment conducive to the development of a sense of belonging amongst participants, foster a strong sense of physics identity among the participants, and provide financial support to enable students to advance academically while earning money. The purpose of this assessment is to review what worked well and lessons that can be learned. We reviewed implementation and execution of the pilot, describe successes and areas for improvement and propose a no-cost extension of the pilot project to apply these lessons and continue engagement activities in the summer of 2022.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Data Driven Approach to Dislocation-Based Plasticity Models of Face-Centered Cubic Metals

Dislocation dynamics controls plastic deformation, mechanical strength, and failure of crystalline materials. It also governs fatigue resistance under cyclic loading, creep resistance at elevated-temperature, and radiation resistance for reactor applications. There is a compelling need for understanding fundamental dislocation mechanisms for deformation because virtually all structural metals used in energy systems are fabricated to desired forms and shapes by deformation processes. To date, the most outstanding problem in a physics-based multiscale model of crystal plasticity is the lack of quantitative connections between continuum plasticity (CP) models with the lower scale dislocation models. As a result, existing CP models used in engineering applications are still phenomenological, while evidence continues to mount that they can make inaccurate predictions under realistically complex scenarios. This project takes advantage of the recent advances in high-performance discrete dislocation dynamics (DDD) simulations and data science approaches to establish the first fully connected multiscale plasticity model for pure face-centered cubic (FCC) single crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

An Atlas of Current Customer-Facing Utility Program Designs and Pricing

The National Renewable Energy Laboratory (NREL) and Kevala conducted a targeted literature review and leveraged extensive expertise, including team members with four decades of experience in the utility sector, to characterize utility programs and rate designs. This analysis delves into the motivations behind these programs and the various hurdles they face. Through this in-depth study, the team provides critical insights into the operational dynamics of utility programs, identifying key drivers and barriers that influence their effectiveness and implementation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Challenges of open data in aquatic sciences: issues faced by data users and data providers

Free use and redistribution of data (i.e., Open Data) increases the reproducibility, transparency, and pace of aquatic sciences research. However, barriers to both data users and data providers may limit the adoption of Open Data practices. Here, we describe common Open Data challenges faced by data users and data providers within the aquatic sciences community (i.e., oceanography, limnology, hydrology, and others). These challenges were synthesized from literature, authors’ experiences, and a broad survey of 174 data users and data providers across academia, government agencies, industry, and other sectors. Through this work, we identified seven main challenges: 1) metadata shortcomings, 2) variable data quality and reusability, 3) open data inaccessibility, 4) lack of standardization, 5) authorship and acknowledgement issues 6) lack of funding, and 7) unequal barriers around the globe. Our key recommendation is to improve resources to advance Open Data practices. This includes dedicated funds for capacity building, hiring and maintaining of skilled personnel, and robust digital infrastructures for preparation, storage, and long-term maintenance of Open Data. Further, to incentivize data sharing we reinforce the need for standardized best practices to handle data acknowledgement and citations for both data users and data providers. We also highlight and discuss regional disparities in resources and research practices within a global perspective.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Progress and Challenges of Additive Manufacturing of Tungsten and Alloys as Plasma-Facing Materials

Tungsten (W) and W alloys are considered as primary candidates for plasma-facing components (PFCs) that must perform in severe environments in terms of temperature, neutron fluxes, plasma effects, and irradiation bombardment. These materials are notoriously difficult to produce using additive manufacturing (AM) methods due to issues inherent to these techniques. The progress on applying AM techniques to W-based PFC applications is reviewed and the technical issues in selected manufacturing methods are discussed in this review. Specifically, we focus on the recent development and applications of laser powder bed fusion (LPBF), electron beam melting (EBM), and direct energy deposition (DED) in W materials due to their abilities to preserve the properties of W as potential PFCs. Additionally, the existing literature on irradiation effects on W and W alloys is surveyed, with possible solutions to those issues therein addressed. Finally, the gaps in possible future research on additively manufactured W are identified and outlined.

36 MATERIALS SCIENCE↗