Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “exposure time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Bactericidal effect of hydrogen peroxide on spacecraft isolates

Results are presented for an experimental study designed to assess the effect of hydrogen peroxide on both sporeforming and nonsporeforming spacecraft isolates as an initial step in determining its suitability for microbiological decontamination of certain United States spacecraft. Survivor data were obtained for eight bacterial isolates (six sporeformers and two nonsporeformers) recovered before launch Mariner 9 and exposed to concentrations of 3, 10, and 15% hydrogen peroxide. The effects of various concentrations of hydrogen peroxide on the spores are presented in tabular form, along with the percentage of survival of nonsporeformers exposed to hydrogen peroxide. No viable vegetative cells were recovered after a 10-min exposure time to any of the three concentration of hydrogen peroxide.

Wardle, M. D.↗
NASA NTRS1976

Fractography of the high temperature hydrogen attack of a medium carbon steel

Results are reported for an experimental study of the microscopic fracture processes associated with hydrogen attack of a commercially produced plain carbon steel in a well-controlled high-temperature hydrogen environment of high purity. In the experiments, sheet samples were exposed to laboratory-grade hydrogen at a pressure of 3.5 MN/sq m and a temperature of 575 C. The fractography of gas-filled fissures and failed tension specimens is analyzed in an effort to identify any predominant microstructural defect associated with fissure formation, the prevalent modes of fracture, and the contribution of gas-filled fissures to the overall failure process. It is found that the tensile properties of the examined steel were significantly degraded after as few as 136 hr of exposure to a high-purity hydrogen atmosphere at 575 C; that the yield strength, ultimate strength, and elongation at fracture were all reduced progressively with increasing exposure time; and that the yield and ultimate strengths were reduced more than 40% after 408 hr while elongation was reduced to less than 2%.

Nelson, H. G.↗
NASA NTRS1977

Does application of the Rosiwal Principle to lunar soils require that concentrations of solar-wind-implanted species be grain-size independent

A reconsideration of the application of the Rosiwal Principle to lunar soils indicates a flaw in arguments put forth previously by Criswell (1975). Specifically, by introducing a boundary condition which must exist at the lunar surface, it is shown that concentrations of solar-wind-implanted species showing a dependence on grain size may be able to develop in soils at concentration levels below those required for saturation of grain surfaces. As a result, observed grain-size-dependent concentrations of solar-wind species in lunar soils do not necessarily require the exposure time scales or solar-wind fluxes deduced from the arguments of Criswell.

Becker, R. H.↗
NASA NTRS1978

Stacked solar cells measure X-ray exposure

Stacked arrangement of solar cells and scintillating sheets in alternating layers produces very sensitive X-ray measuring device. Sensor is compatible with short exposure times typical of modern X-ray film, making it suitable for application in medical soft X-ray facilities.

Berdahl, C. M.↗
NASA NTRS1977

Space radiation resistant transparent polymeric materials

A literature search in the field of ultraviolet and charged particle irradiation of polymers was utilized in an experimental program aimed at the development of radiation stable materials for space applications. The rationale utilized for material selection and the synthesis, characterization and testing performed on several selected materials is described. Among the materials tested for ultraviolet stability in vacuum were: polyethyleneoxide, polyvinylnaphthalene, and the amino resin synthesized by the condensation of o-hydroxybenzoguanamine with formaldehyde. Particularly interesting was the radiation behavior of poly(ethyleneoxide), irradiation did not cause degradation of optical properties but rather an improvement in transparency as indicated by a decrease in solar absorptance with increasing exposure time.

Giori, C.↗
NASA NTRS1977

Continuous and cyclic thermal exposure induced degradation in boron reinforced 6061 aluminum composites

Boron reinforced 6061 aluminum (B/Al) composite was continuously exposed at 728 K for up to 240 hours and cyclically exposed between 293 K and 728 K for up to 6000 three-minute cycles. Room temperature tensile strengths were measured and the specimens were metallographically examined. The data suggest that, in addition to AlB2 formation, magnesium in the matrix diffused to the reaction layer and formed (Al,Mg)B2. This formation could weaken the matrix and embrittle the reaction layer. Continuous exposure degraded the strength of the B/Al specimens about 28% in 240 hours. However, the fracture mode, one indicative of high strength interfaces, did not change. The strength degradation was attributed to crack initiation in the brittle reaction layer causing stress concentrations in the fibers. Cyclic exposure degraded the strength of the B/Al about 34% in 6000 cycles. The fracture mode of the cyclic exposure specimens showed transition toward a mode characteristic of low interfacial strength. The lower interfacial strengths were attributed to stress fields induced by differential thermal expansion. Cyclic exposure degraded the strength of the B/Al specimens more than continuous exposure for similar cumulative exposure times.

Olsen, G. C.↗
NASA NTRS1978

Hydrogen attack - Influence of hydrogen sulfide

An experimental study is conducted on 12.5-mm-thick SAE 1020 steel (plain carbon steel) plate to assess hydrogen attack at room temperature after specimen exposure at 525 C to hydrogen and a blend of hydrogen sulfide and hydrogen at a pressure of 3.5 MN/sq m for exposure times up to 240 hr. The results are discussed in terms of tensile properties, fissure formation, and surface scales. It is shown that hydrogen attack from a high-purity hydrogen environment is severe, with the formation of numerous methane fissures and bubbles along with a significant reduction in the room-temperature tensile yield and ultimate strengths. However, no hydrogen attack is observed in the hydrogen/hydrogen sulfide blend environment, i.e. no fissure or bubble formation occurred and the room-temperature tensile properties remained unchanged. It is suggested that the observed porous discontinuous scale of FeS acts as a barrier to hydrogen entry, thus reducing its effective equilibrium solubility in the iron lattice. Therefore, hydrogen attack should not occur in pressure-vessel steels used in many coal gasification processes.

Eliezer, D.↗
NASA NTRS1975

Ion-probe studies of artificially implanted ions in lunar samples

The ion microprobe at the Johnson Space Center was used to study depth profiles of artificially implanted ions in lunar samples. Five polished sections of typical mare basalts (12040 and 12018) were irradiated with nine different elements at two energies and the resulting concentrations were measured as a function of depth in the minerals plagioclase, pyroxene, and ilmenite. These preliminary simulation experiments were undertaken to determine whether the ion probe can be used to measure solar-wind-implanted elements on the surface of lunar rock crystals and soil grains and to study mechanisms for the redistribution. The results obtained so far demonstrate that depth profiles can indeed be measured with the ion probe. From estimated exposure times of mature soil grains and selected vug crystals, it appears possible (if difficult) to detect several solar-wind-implanted elements.

Zinner, E.↗
NASA NTRS1979

Multiple-camera automatic controller

Device automatically controls exposure time and frame sequencing for three remotely located cameras used for photographing interior of internal-combustion chamber through special viewing ports. Controller is highly applicable in many areas where closely monitored remote photography is required.

Bloam, E. T.↗
NASA NTRS1978

Adhesive bonding of ion beam textured metals and fluoropolymers

An electron bombardment argon ion source was used to ion etch various metals and fluoropolymers. The metal and fluoropolymers were exposed to (0.5 to 1.0) keV Ar ions at ion current densities of (0.2 to 1.5) mA/sq cm for various exposure times. The resulting surface texture is in the form of needles or spires whose vertical dimensions may range from tenths to hundreds of micrometers, depending on the selection of beam energy, ion current density, and etch time. The bonding of textured surfaces is accomplished by ion beam texturing mating pieces of either metals or fluoropolymers and applying a bonding agent which wets in and around the microscopic cone-like structures. After bonding, both tensile and shear strength measurements were made on the samples. Also tested, for comparison's sake, were untextured and chemically etched fluoropolymers. The results of these measurements are presented.

Mirtich, M. J.↗
NASA NTRS1979

Vulnerability of Quick Disconnect Connectors to Carbon Fibers

Unprotected quick disconnect electrical connectors were exposed to fibers of 3mm, 7mm, and 12mm lengths. The average exposure to failure was determined. Results indicate that when the fiber length divided by the airgap is less than one, multiple fibers are required to bridge the gap, and the exposure time to failure rises rapidly.

Meyers, J. A.↗
NASA NTRS1979

CO2 laser annealing of 50-microns-thick silicon solar cells

A test program is conducted to determine thin solar cell annealing effects using a laser energy source. A CO2 continuous-wave laser was used in annealing experiments on 50 micrometers-thick silicon solar cells after proton irradiation. Test cells were irradiated to a fluence of 1.0 x 10 to the 12th power protons/sq cm with 1.9 MeV protons. After irradiation, those cells receiving full proton dosage were degraded by an average of 30% in output power. In annealing tests laser beam exposure times on the solar cell varied from 2 seconds to 16 seconds reaching cell temperatures of from 400 C to 500 C. Under those conditions annealing test results showed recovery in cell output power of from 33% to 90%.

Walker, F. E.↗
NASA NTRS1978

Adhesive bonding of ion beam textured metals and fluoropolymers

An electron-bombardment argon ion source was used to ion-etch various metals and fluoropolymers. The metal and fluoropolymers were exposed to (0.5 to 1.0)-keV Ar ions at ion current densities of 0.2 to 1.5 mA/sq cm for various exposure times. The resulting surface texture is in the form of needles or spires whose vertical dimensions may range from tenths to hundreds of micrometers, depending on the selection of beam energy, ion current density, and etch time. The bonding of textured surfaces is accomplished by ion-beam texturing mating pieces of either metals or fluoropolymers and applying a bonding agent which wets in and around the microscopic conelike structures. After bonding, both tensile and shear strength measurements were made on the samples. Also tested, for comparison's sake, were untextured and chemically etched fluoropolymers. The results of these measurements are presented in this paper.

Mirtich, M. J.↗
NASA NTRS1979

A secondary tracer approach to the derivation of galactic cosmic-ray source isotopic abundances

A formalism has been developed for deriving cosmic-ray source isotopic abundances from observed local abundances using a purely secondary nuclide as a tracer of spallation production during propagation. Although the formalism is based on the leaky-box model of cosmic-ray propagation, it is shown that source abundances derived by the tracer technique are reasonably independent of detailed propagation models. The tracer formalism also permits a quantitative evaluation of the effects of observational uncertainties on deduced source abundances. It is shown that statistical errors in the observed abundances and uncertainties in the spallation cross sections are at present the dominant sources of uncertainty. The latter error can be reduced with increased detector size or exposure time, while the former can be minimized by measurements of the relative production cross sections. As a specific example, the tracer technique is applied to the isotopes of sulfur and calcium, and the level of uncertainties which must be achieved to distinguish evolutionary differences between solar-system material and cosmic ray-source material are established.

Stone, E. C.↗
NASA NTRS1979

Hot-atom synthesis of organic compounds on Jupiter

Results of recent laboratory 'simulations' of photochemical processes on Jupiter are combined with available data on mixing rates and exposure times in the Jovian atmosphere to give quantitative predictions of the rate at which hot-atom reactions produce organic molecules. It is shown that abstraction reactions on methane by hot H atoms from solar UV photolysis of H2S will produce no more than 4 times 10 to the -17th power g/sq cm/sec for a steady-state mole fraction of total organics of approximately 10 to the -16th power. This is roughly 10 to the 7th power times less than the limit of detection of the most sensitive gas analysis experiments ever flown on a spacecraft. By far the most common organic molecule produced by this mechanism is CH3SH, methyl mercaptan, which is produced at a rate at least 600 times smaller than the rate of production of ethane by direct photolysis of CH4 at high altitudes.

Lewis, J. S.↗
NASA NTRS1981

Less-toxic corrosion inhibitors

Combinations of borates, nitrates, phosphates, silicates, and sodium MBT protect aluminum from corrosion in fresh water. Most effective combinations contained sodium phosphate and were alkaline. These inhibitors replace toxic chromates which are subject to governmental restrictions, but must be used in larger quantities. Experimental exposure times varied from 1 to 14 months depending upon nature of submersion solution.

Humphries, T. S.↗
NASA NTRS1979

An emission-line survey of the Milky Way

Direct photography of gaseous nebulae using interference filters to isolate individual emission lines is capable both of discriminating between different ions and of enhancing the visibility of nebulae by suppressing stellar images and the quasi-continuous sky background in favor of the chosen band pass. The instrumentation used in an examination of the ionization structure of emission nebulae and of the galactic plane in general, is described, as well as the characteristics of the prints obtained. Reasonable exposure times were obtained with the use of an image intensifier and five interference filters isolated the band passes chosen for the survey. A rough map of each field is presented with a print from the Becvar Skalnate Pleso covering the same area. The structural differences which the authors hoped to record can be seen in many of the fields included in this volume. For purposes of illustration, they are strikingly shown in the fields centered about the following "new" galactic coordinates, where l is longitude and b is latitude: I = 138 °, b = 0°; l = 293 °, b = 0°; and l = 263 °, b = 0 °. In addition to investigating the structure of known emission nebulae, the authors also hoped to find some new objects. By far the most striking of such discoveries is the new supernova remnant in the field l= 65.5 °, b = +5 °.

wide-field camera↗
NASA NTRS1980

Analyses of moisture in polymers and composites

A suitable method for the direct measurement of moisture concentrations after humidity/thermal exposure on state of the art epoxy and polyimide resins and their graphite and glass fiber reinforcements was investigated. Methods for the determination of moisture concentration profiles, moisture diffusion modeling and moisture induced chemical changes were examined. Carefully fabricated, precharacterized epoxy and polyimide neat resins and their AS graphite and S glass reinforced composites were exposed to humid conditions using heavy water (D20), at ambient and elevated temperatures. These specimens were fixtured to theoretically limit the D20 permeation to a unidirectional penetration axis. The analytical techniques evaluated were: (1) laser pyrolysis gas chromatography mass spectrometry; (2) solids probe mass spectrometry; (3) laser pyrolysis conventional infrared spectroscopy; and (4) infrared imaging thermovision. The most reproducible and sensitive technique was solids probe mass spectrometry. The fabricated exposed specimens were analyzed for D20 profiling after humidity/thermal conditioning at three exposure time durations.

Ryan, L. E.↗