Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrocatalytic oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

296 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Highly Active and Durable Air Electrodes for Reversible Protonic Ceramic Electrochemical Cells Enabled by an Efficient Bifunctional Catalyst

The commercialization of reversible protonic ceramic electrochemical cells is hindered by the lack of highly active and durable air electrodes exposed to high concentration of steam under operating conditions. We report findings that dramatically enhance the electrocatalytic activity and stability of a conventional (La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3-δ (LSCF) air electrode by a multiphase catalyst coating composed of a conformal Pr 1-x Ba x CoO 3-δ thin film and exsolved BaCoO 3-δ nanoparticles, are reported. At 600 °C, the catalyst coating decreases the polarization resistance of the LSCF air electrode by a factor of 25 (from 1.09 to 0.043 Ω cm 2 ) in air and the degradation rate by two orders of magnitude (from 1.0 × 10 -2 to 1.8 × 10 -4 Ω cm2 h -1 in humidified air with 30 vol% H2O). Further, a single cell with the catalyst-coated LSCF air electrode at 600 °C demonstrates a high peak power density of 1.04 W cm -2 in the fuel cell mode and a high current density of 1.82 A cm -2 at 1.3 V in the electrolysis mode. The significantly enhanced performance of the LSCF air electrode is attributed mainly to the high rate of surface oxygen exchange, fast surface proton diffusion, and the rapid H 2 O and O 2 dissociation on the catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Iridium Incorporation into MnO 2 for an Enhanced Electrocatalytic Oxygen Evolution Reaction

Here, we have investigated the structure and activity of electrocatalysts for the oxygen evolution reaction (OER) that had low loadings of Ir incorporated into the 2D layered MnO 2 , (birnessite, nominally δ-MnO 2 ) and the 3D MnO 2 (pyrolusite, β-MnO 2 ). The Ir-incorporated β-MnO 2 (Ir/β-MnO 2 ) electrocatalysts were prepared for the first time via a thermally induced phase transition of δ-MnO 2 containing 16-22 wt% Ir. This phase transition of δ-MnO 2 to β-MnO 2 was facilitated by the presence of Ir in the structure, as both Ir in IrO 2 and Mn in β-MnO 2 could adopt a thermodynamically favored rutile structure. Extended X-ray absorption fine structure (EXAFS) of Ir/β-MnO 2 showed that the catalyst consisted of Ir substituted into the crystalline β-MnO 2 lattice. 22 wt% Ir/β-MnO 2 (60 μg Ir cm $\ ^{-2}_{geo}$) exhibited an OER overpotential (η) of 337 mV, lower than the η for commercial IrO 2 . This η was constant for 6 h, at 10 mA cm $\ ^{-2}_{geo}$ in 0.5 M H 2 SO 4 . EXAFS, high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray absorption near edge structure (XANES) showed that 22 wt% Ir/β-MnO 2 had a strained structure containing ~41% Mn 3+ , an OER active species, along with a modified Ir bond covalency consisting of both Ir-O-Ir and Ir-O-Mn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Ketjenblack-Supported and Unsupported ZrO 2 –ZrN Nanoparticle Systems for Enabling Efficient Electrochemical Nitrogen Reduction to Ammonia

Artificial N 2 fixation via the electrocatalytic nitrogen (N 2 ) reduction reaction (NRR) has been recently promoted as a rational route toward reducing energy consumption and CO 2 emission as compared with the traditional Haber–Bosch process. Nevertheless, optimizing NRR relies on developing highly efficient electrocatalysts. Herein, we report on the reliable and reproducible synthesis of two promising electrocatalysts in either the presence or absence of Ketjenblack (KB), namely, ZrO 2 –ZrN@KB and ZrO 2 –ZrN systems, synthesized through the nitriding of Zr. Both materials had never previously been considered for NRR, to the best of our knowledge. Nevertheless, both of these electrocatalysts incorporated a combination of tetragonal ZrO 2 , ZrON, and cubic ZrN and showed excellent activity and durability toward NH 3 formation. Moreover, the maximum NH3 production rate of 84.1 μg h –1 mg –1 at -0.7 V vs a reversible hydrogen electrode (RHE) was achieved with the ZrO 2 –ZrN electrocatalyst with an impressive Faradaic efficiency of 21.2% at -0.6 V vs RHE, indicating a high selectivity associated with the NRR. Additionally, the catalysts demonstrated excellent stability during the electrolysis process and recycling tests. Here we postulate that the combination of exposed active sites of ZrN and ZrO 2 likely contributes to the enhanced NRR performance attributed to ZrO 2 –ZrN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Durable and High-Performance SOECs Based on Proton Conductors for Hydrogen Production

Proton-conducting solid oxide electrolysis cells (P-SOECs) are a promising technology for cost-effective and efficient production of green hydrogen. Breakthroughs in materials development, optimization of cell structure, and achievement of high performance and durability are essential to significantly increase the commercial competitiveness of these technologies. The main objective of this project is to gain scientific knowledge for the rational design, fabrication, and demonstration of a robust, highly efficient, and low-cost SOEC technology based on a proton-conducting electrolyte membrane for hydrogen production. We focused on better understanding the degradation mechanisms of proton-conducting electrolytes, air electrodes, and catalyst materials under electrolysis mode to develop an effective strategy for rationalizing new materials that are vital for enhancing cell performance and durability. The scope includes enhancing the performance and durability of the electrolyte and electrode materials under realistic operating conditions, developing highly active and robust catalysts to minimize electrode losses while improving tolerance to contaminant poisoning, revealing the mechanism of enhanced activity and stability of the catalyst, and understanding the underlying degradation mechanisms. In addition, various characterization techniques were employed to gain a fundamental understanding of the materials’ behavior and their impact on cell performance, providing vital information to guide materials discovery and cell design. After defect chemistry engineering, the optimized donor and acceptor co-doped electrolytes BaMo/W 0.03 Ce 0.71 Yb 0.26 O 3-δ (BM/W03) showed substantially improved chemical stability against high concentrations of CO 2 and H 2 O compared to the state-of-the-art electrolyte (BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ , BZCYYb1711) while maintaining comparable ionic conductivity and ionic transference number. To bypass the inherent trade-off between conductivity and chemical stability, we fabricated a bi-layer electrolyte composed of BZCYYb1711 coated with a highly-stable thin layer of BaHf 0.83 Yb 0.17 O 3-δ (BHYb). This bi-layer electrolyte displayed excellent chemical stability against high concentration CO 2 ; there was no detectable formation of BaCO 3 after exposure to 97% CO 2 (with 3% H 2 O) at 500 °C for 1000 hours and the rate of degradation in resistance was about 0.4% per 1,000 hours (kh). In contrast, the same BZCYYb1711 electrolyte without a BHYb coating degraded significantly under the same testing conditions; the degradation rate was increased to 5.1%/kh. In addition, a triple conducting air electrode Ba 0.9 Pr 0.1 Hf 0.1 Y0.1Co 0.8 O 3-δ (BPHYC) was developed by heavily doping transition metal ions into a proton-conducting material. This air electrode material, composed of 3 distinct phases, exhibits superior electrocatalytic activity due to the synergistic effect from the three component phases. Moreover, an active and durable catalyst, La 2 Ni 0.5 Fe 0.5 O 4+δ (LNF), was developed, showing excellent catalytic activity and contaminant tolerance, with a degradation rate of only 0.49%/kh when exposed to high concentrations of steam and Cr. Finally, single cells were constructed from the best electrolytes, electrodes, and catalyst coatings developed in this project. These cells demonstrated superior high current density at a given cell voltage, high roundtrip efficiency, and remarkable durability (up to 1000 hours of operation).

08 HYDROGEN↗
DOE OSTI2025

Optimizing CO 2 -Loaded Aqueous Amine Solutions for Higher Electrocatalytic CO 2 Reduction Activity

The activity of aqueous-based carbon dioxide reduction (CO 2 R) reactions is often limited by the solubility of CO 2 . The addition of amines can increase the total dissolved carbon in water through the formation of bicarbonate and carbamate species, which has been used to a great effect to capture CO 2 from dilute streams. Here, in this study, we explore the effect of 12 primary and secondary amines of varying Brønsted basicity, steric profile, and hydrogen-bonding capabilities on the aqueous CO 2 R to CO activity of a molecular Ni(cyclam)Cl 2 catalyst with a Hg electrode. Addition of some of the amines results in greater activity and selectivity for CO production compared to equivalent aqueous solutions without added amines. Under optimal conditions (0.4 M 3-amino-propionitrile), there is an over sevenfold increase in partial current density and greater selectivity for CO compared to equivalent conditions with no amine. Interestingly, the increase in activity did not correlate to any single property across the 12 amines. To elucidate the effect of the amine additives on catalysis, we used vapor–liquid equilibrium modeling (VLE), 13 C NMR spectroscopy, and computational analysis to determine the carbon speciation of the solutions. These results indicate that for amines without ethylalcohol functionalities, CO 2 R activity correlates with carbamate concentration, which is in turn governed by amine basicity and steric effects. However, this correlation does not persist for amines with ethylalcohol functionalities, which can form more stable carbamates through intramolecular-hydrogen bonding. These studies demonstrate that amine additives can enhance aqueous CO 2 R activity and selectivity and describe amine properties that lead to these higher performance metrics.

Amines↗
DOE OSTI2026

Solution and Active Site Speciation Drive Selectivity for Electrocatalytic Reactive Carbon Capture in Diethanolamine over Ni–N–C Catalysts

Direct conversion of captured forms of carbon, or reactive carbon capture (RCC), presents an opportunity to reduce the energy intensity and cost of direct CO 2 utilization from dilute sources. While amine-based sorbents effectively capture CO 2 , their use for RCC presents numerous challenges with typical pure metal catalysts used for electrochemical CO 2 reduction (CO 2 R). Here, using both theory and experiments, we find that Ni–N–C single atom catalysts are effective for RCC conversion to CO using a diethanolamine sorbent, in contrast to pure metal catalysts. Computational analysis reveals that RCC can proceed directly through direct reduction of the sorbent-CO 2 adduct or indirectly by C–N bond breaking facilitating CO 2 adsorption and subsequent reduction. We find that the latter mechanism is most prevalent at low overpotentials where we experimentally observe RCC selectivity. We also find experimentally that the rate of CO production for RCC with Ni–N–C catalysts can exceed pure bicarbonate solutions at intermediate sorbent concentration (0.1–0.5 M DEA) under dilute (10–25%) streams of CO 2 at low overpotentials. The coordination environment of Ni sites and the solution speciation influence their RCC activity, with changes in protonation to coordinating N/C atoms resulting in changing the RCC mechanism and consequent activity. In situ X-ray absorption spectroscopy and computational analysis reveal restructuring under RCC conditions due to hydrogen coadsorption with DEA that limits the stability of Ni–N–C catalysts. This work highlights the importance of carefully controlling the catalyst and solution environment to achieve active and stable RCC electrocatalysis.

Chemistry↗
DOE OSTI2026

Spin Polarization Enhanced Ethanol Selectivity in Electrocatalytic CO 2 Reduction on the Paramagnetic CuO Surface

We report an electrochemical CO 2 reduction reaction catalyzed by a paramagnetic and conductive CuO/Cu interface with spins polarized by a moderate external magnetic field (MF) of similar to 800 gauss, achieving a similar to 30% increase in CO 2 -to-C 2+ Faradaic efficiency (FE) compared to that in the absence of the MF in a flow cell electrolyzer. At a current density of 400 mA/cm 2 , the CO 2 -to-C 2+ FE reached 86.7 ± 2.7% with 47.9 ± 1.4% cathodic energy efficiency (EE) in contrast to the CO 2 -to-C 2+ FE of 67.6% with 36.4% of EE in the absence of MF. Notably, ethanol production exhibits a much higher response to the MF (similar to 55.6% increase in FE) than ethylene (similar to 6.4% increase in FE) at 400 mA/cm 2 . In situ surface-enhanced Raman spectroscopy (SERS) captured magnetic-field-enhanced *CO coverage and ethanol-forming C 2 intermediates on CuO/Cu, providing direct spectroscopic evidence of spin-modulated pathway selection. Here, computational study suggests that the enhancement of ethanol selectivity is due to the reduced reaction kinetic barrier under MF, while the ethylene selectivity is less affected, mainly due to the insensitivity of the kinetic barriers under MF.

10 SYNTHETIC FUELS↗
DOE OSTI2026

Quasi-In-Situ Analysis of Electrode Top Atomic Layers via High-Sensitivity Low-Energy Ion Scattering and Potential-Controlled Sample Transfer

Electrocatalytic reactions involve interfacial interactions between the surfaces of electrodes and reactive species at an electrolyte interface. There are presently no universal or unambiguous methods to directly assay the active top atomic layer composition that influences the reactivity of these electrodes under relevant operating conditions. Low-energy ion scattering (LEIS) spectroscopy is a surface characterization technique that yields compositional analysis of the outermost atomic layer of a material, but it must be performed in ultrahigh vacuum (UHV). Application of LEIS measurements to electrochemical materials that are removed from ambient liquid-phase environments thus leaves an open question as to whether the surface that is transferred to UHV is truly the surface that manifested during the electrochemical reaction. Toward the goal of preserving the active surface state, we developed a sample transfer workflow for LEIS enabling air-free removal and drying of an electrode from an electrochemical cell while maintaining control of the potential using an auxiliary electrode. The potential-controlled emersion method was demonstrated to give distinct potential-dependent surface compositions for a Cu−Pd alloy relative to removal after uncontrolled return to open-circuit potential. A Cu-enriched surface was found at anodic potential and a Pd-enriched surface at cathodic potential, suggesting that the approach can be used to retain representative atomic configurations during transfer. Since adsorbates will often persist from the reaction environment, conventional sample pretreatment methods for removal, including atomic O and atomic H exposure, were also contrasted. Both methods were found to differ with results from incidental low-dose depth profiling by the LEIS primary ion source, which removes adventitious species and surface atoms during the course of repeated measurements. These depth profiles were found to be sensitive to sample history and thus qualitatively informative, despite the possible changes induced by ion damage. The results exhibit (i) the need for complete control over the polarization state of the sample at all times (no excursions to open circuit during transfer) and (ii) the utility of low-dose depth profiling to capture changes in the near-surface composition.

Alloys↗