Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical resistivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Integrated hydrogeophysical modelling and data assimilation for geoelectrical leak detection

Time-lapse electrical resistivity tomography (ERT) measurements provide indirect observations of hydrological processes in the Earth's shallow subsurface at high spatial and temporal resolution. ERT has been used in the past decades to detect leaks and monitor the evolution of associated contaminant plumes. Specifically, inverted resistivity images allow visualization of the dynamic changes in the structure of the plume. However, existing methods do not allow the direct estimation of leak parameters (e.g. leak rate, location, etc.) and their uncertainties. We propose an ensemble-based data assimilation framework that evaluates proposed hydrological models against observed time-lapse ERT measurements without directly inverting for the resistivities. Each proposed hydrological model is run through the parallel coupled hydro-geophysical simulation code PFLOTRAN-E4D to obtain simulated ERT measurements. The ensemble of model proposals is then updated using an iterative ensemble smoother. In this paper, we demonstrate the proposed framework on synthetic and field ERT data from controlled tracer injection experiments. Our results show that the approach allows joint identification of contaminant source location, initial release time, and solute loading from the cross-borehole time-lapse ERT data, alongside with an assessment of uncertainties in these estimates. We demonstrate a reduction in site-wide uncertainty by comparing the prior and posterior plume mass discharges at a selected image plane. This framework is particularly attractive to sites that have previously undergone extensive geological investigation (e.g., nuclear sites). It is well suited to complement ERT imaging and we discuss practical issues in its application to field problems.

58 GEOSCIENCES↗
DOE OSTI2022

A Cartesian-diffusion Langevin method for hybrid kinetic-fluid Coulomb scattering in particle-in-cell plasma simulations

A novel, drag-diffusion Langevin method of hybrid, kinetic-fluid Coulomb scattering in plasmas is presented. Unlike previous methods, the frictional drag is always applied in the simulation frame of reference. The velocity-space diffusion is performed in the stationary-fluid frame of reference when anisotropic, and in the laboratory frame when isotropic. While the general method is mass-ratio independent, we focus on interactions of kinetic-ions and fluid-electrons to show first-order modifications to the electron velocity distribution function that are an important correction for the accurate calculation of electric resistivity. Inclusion of sub-cycling and a limit to the maximum collision frequency is shown to allow for arbitrarily large timesteps without numerical failure. Here the Langevin method is compared with a grid-based binary method and found to require a much less restrictive timestep in cases of ion–electron slowing and temperature equilibration; this finding differs from previous work and is dependent on the mass ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Electrical monitoring of saline tracers to reveal subsurface flow pathways in a flat ditch-drained field

Time-lapse electrical resistivity imaging (ERI) combined with salt tracers can enhance our understanding of subsurface flow and transport in ditch-drained agroecosystems. In a nearly level field adjacent to a drainage ditch, we installed 192 electrodes in a 72-m2 plot along with five hydrometric stations to enable time-lapse ERI monitoring during storms. Immediately prior to a wintertime rainstorm, we applied 5 kg of KBr to a shallow trench located roughly 11 m upgradient from the ditch. Antecedent conditions prior to the storm were wet, assuring a hydrologically connected state that favored tracer dissolution and movement in the subsurface. We monitored the evolution of the tracer plume with ERI over a seven-day period. Four-dimensional (4D) delineation of precipitation and tracer transport using time-lapse ERI showed that the tracer plume moved preferentially downward through a discontinuity in the argillic horizon within the first 57 hrs. Over the following 79 hrs, the tracer plume exhibited steady, lateral movement towards the drainage ditch within a more permeable sandy horizon situated just below the argillic. A spatial moment analysis of logarithmic changes in conductivity in the sand layer revealed seepage velocities ranging from 0.0027 to 0.0482 m d-1; these values were positively correlated with hydraulic gradients, suggesting laminar flow processes typical of sandy aquifers. Increasing groundwater velocities with hydraulic gradients suggest that solute transfers from groundwater to ditch are likely to be faster in storms, especially during wet periods. Even so, predominantly slow lateral transport within the sandy horizon, even during storms, indicates that critical source areas of pollutant loss are likely within a few meters of the ditch.

Robinson, Judith L.↗
DOE OSTI2022

Magnetic ordering in GdAuAl 4 Ge 2 and TbAuAl 4 Ge 2 : Layered compounds with triangular lanthanide nets

In this work, we report the synthesis and magnetic properties of GdAuAl 4 Ge 2 and TbAuAl 4 Ge 2 , where temperature and magnetic field dependent magnetization, heat capacity, and electrical resistivity measurements reveal that both compounds exhibit several magnetically ordered states at low temperatures, with evidence for magnetic fluctuations extending into the paramagnetic temperature region. For magnetic fields applied in the ab-plane there is particularly rich behavior, with several ordered state regions that are separated by metamagnetic phase transitions. Despite Gd being an isotropic S-state ion and Tb having an anisotropic J-state, there are similarities in the phase diagrams for the two compounds, suggesting that factors such as the symmetry of the crystalline lattice, which features well separated triangular planes of lanthanide ions, or the Ruderman–Kittel–Kasuya– Yosida interaction control the magnetism. We also point out similarities to other centrosymmetric compounds that host skyrmion lattices such as Gd 2 PdSi 3 , and propose that the LnAuAl 4 Ge 2 family of compounds are of interest as reservoirs for complex magnetism and electronic behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Development of hydrothermal corrosion model and BWR metal coating for CVD SiC in light water reactors

SiC/SiC fiber composites with CVD SiC overcoats are potential candidates for light water reactor advanced accident tolerant cladding materials. Understanding its corrosion kinetics in Light Water Reactor (LWR) conditions is essential to evaluate the concept's viability. Existing models only account for the temperature and oxygen concentration effect on the hydrothermal corrosion behavior applicable to LWR operating conditions. However, the development of a general corrosion rate for CVD SiC that accounts for the impact of irradiated microstructure, flow rate, electrical resistivity, pH, and surface roughness is critical for the practical realization of SiC/SiC-based cladding concepts. After a rigorous experimental campaign, this work updates the existing hydrothermal corrosion model to predict hydrothermal corrosion in LWRs. Numerical radiation and coolant chemistry analysis for LWRs conducted based on the updated corrosion kinetic models suggests that CVD SiC is likely a viable environmental barrier coating for Pressurized Water Reactors while questionable for Boiling Water Reactors (BWR) when the effect of irradiation damage on SiC corrosion is considered. An effective mitigation strategy for the double-layer metal coating is proposed for BWR applications. The double-layer metal coating comprising a FeCrAl overcoat with an intermediate Cr bond coating was observed to provide a stable protective barrier against SiC dissolution in BWR conditions. Finally, the proposed metal coating was also fully adherent following quench and burst tests.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Understanding the effect of specimen size on the properties of fine-grain isotropic nuclear graphite for irradiation studies: Physical, electrical, thermal properties

Programs at Oak Ridge National Laboratory are investigating the effects of neutron irradiation in the High Flux Isotope Reactor (HFIR) on properties of fine-grain nuclear graphites. Specimens were irradiated in the HFIR flux trap, which required using specimens that are smaller than the sizes recommended by ASTM standards. Here, this work has investigated whether subsized specimens can be used to reliably determine the measured physical (density, elastic moduli, and electrical resistivity) and thermal properties (coefficient of thermal conductivity and thermal conductivity). The results show the specimen sizes in this investigation had a minimal influence on any of the measured properties. Even for the properties where size influenced the measured value (density and thermal conductivity), an explanation is provided, and the consequences can be accounted for in post-irradiation results. This work demonstrated that using subsized specimens for physical and thermal property measurements is suitable when necessary for fine-grain isotropic graphite.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High temperature annealing of irradiated nuclear grade graphite

Previous work has shown that the material properties of nuclear grade graphite are substantially affected by the atomic and microstructural changes that occur during neutron-irradiation. The parameters that play a role in these changes are irradiation dose, temperature, graphite composition and the initial microstructure of the graphite. Understanding the details of how these material changes occur and exactly what the changes consists of will enable the prediction of the material property changes as a function of these variables. Other work has shown these atomic level and microstructural changes can be healed or annealed out by raising the irradiated graphite above its irradiation temperature. Here in this work, experiments were carried out to investigate how the properties of irradiated graphite recover when heated. By showing property recovery as a function of annealing temperature or energy, insight is provided into the type of damage that occurred during neutron-irradiation. The data presented here shows recovery of thermal diffusivity, coefficient of thermal expansion, Young's modulus and electrical resistivity between annealing temperatures of 500 °C and 2380 °C. Graphite grades NBG-18, IG-110 and PCEA are considered that were both stressed and unstressed during irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Large magnon-induced anomalous Nernst conductivity in single-crystal MnBi

Thermoelectric modules are a promising approach to energy harvesting and efficient cooling. In addition to the longitudinal Seebeck effect, transverse devices utilizing the anomalous Nernst effect (ANE) have recently attracted interest. For high conversion efficiency, it is required that the material have a large ANE thermoelectric power and low electrical resistance, which lead to the conductivity of the ANE. ANE is usually explained in terms of intrinsic contributions from Berry curvature. Our observations suggest that extrinsic contributions also matter. Studying single-crystal manganese-bismuth (MnBi), we find a high ANE thermopower (~10 μV/K) under 0.6 T at 80 K, and a transverse thermoelectric conductivity of over 40 A/Km. With insight from theoretical calculations, we attribute this large ANE predominantly to a new advective magnon contribution arising from magnon-electron spin-angular momentum transfer. We propose that introducing a large spin-orbit coupling into ferromagnetic materials may enhance the ANE through the extrinsic contribution of magnons.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Crystal structure and magnetic properties of Gd 8 Mn 3 Sb 19

Here, in this study, a novel magnetic semimetal compound, Gd 8 Mn 3 Sb 19 , was synthesized successfully via high-temperature solid-state reaction. The crystal structure of Gd 8 Mn 3 Sb 19 was determined using both single crystal and powder X-ray diffraction techniques, revealing a non-centrosymmetric orthorhombic space group, Pmn2 1 (No. 31). The Sb atoms in Gd 8 Mn 3 Sb 19 form five-atom-wide Sb 5 7− ribbons, narrower three-atom-wide Sb 3 5− ribbons, and single Sb 3− anions. On the other hand, both Gd 3+ and Mn 2+ ions form the distorted Gd 3 and Mn 3 triangular lattices, respectively. The magnetic measurements suggest the complex magnetic interactions contributed by both Gd 3+ and Mn 2+ ions. A sharp peak observed in the magnetic susceptibility plot at approximately 25 K corresponds to the antiferromagnetic-type transition in Gd 8 Mn 3 Sb 19 . Furthermore, the magnetic measurements along different directions indicate the strong magnetic anisotropy present in Gd 8 Mn 3 Sb 19 , which is likely due to the complex magnetic interactions arising from the existence of Gd and Mn ions. Finally, the electrical resistivity measurements of Gd 8 Mn 3 Sb 19 indicate semimetallic behavior with a positive magnetoresistance.

Chemistry↗
DOE OSTI2021

Potentiometric entropy and operando calorimetric measurements reveal fast charging mechanisms in PNb 9 O 25

The Wadsley–Roth compound PNb 9 O 25 is a promising fast charging lithium ion battery anode material with high operating voltage to prevent solid electrolyte interface formation. Here, in this work, we present potentiometric entropy measurements featuring signatures of semiconductor-to-metal transition and intralayer ordering upon lithiation in the anode material PNb 9 O 25 that could not be observed with in situ X-ray diffraction. In addition, the instantaneous heat generation rates at the PNb 9 O 25 working electrode and at the lithium metal counter electrode during galvanostatic cycling were measured individually for the first time by operando isothermal calorimetry. The heat generation rate decreased at the PNb 9 O 25 electrode upon lithiation due to the decrease in electrical resistivity caused by the semiconductor-to-metal transition observed in potentiometric entropy measurements. Furthermore, the heat generation rate at the lithium metal electrode was positive during delithiation due to the exothermic plating of Li + ions on the lithium metal counter electrode associated with dendrite formation. Furthermore, calorimetric measurements established that the entropy change dominated the reversible heat generation rate at each electrode. Finally, the contribution of enthalpy of mixing was relatively small even at high C-rates thanks to the high Li + ion mobility in PNb 9 O 25 confirming its promises as a fast charging anode material.

25 ENERGY STORAGE↗
DOE OSTI2023

Coating developments towards enabling aluminum as a bipolar plate material for PEM fuel cells

Bipolar plates represent a significant portion of the cost and weight of a proton exchange membrane fuel cell stack. As a result, there has been significant interest in using low weight and cost materials, such as aluminum. Aluminum has good mechanical and physical properties; however, it performs poorly in the corrosive environment within the fuel cell stack. To overcome the corrosion performance issue, there have been efforts towards developing coating processes to enable aluminum to attain corrosion targets. In an effort to enable aluminum as a viable bipolar plate material, a solid phase processing (diffusion bonding) approach for bonding a titanium foil to aluminum is investigated in this study. The microstructure, corrosion performance, mechanical properties and electrical resistance are investigated. To avoid the known reduction in contact resistance performance of titanium after exposure to bipolar plate media, the effect of addition of highly conductive gold particles after diffusion bonding, on contact resistance and corrosion behavior, is also studied and compared with diffusion bonded Ti to Al. In conclusion, the results indicate that diffusion bonded Ti to Al provides a viable alternative material combination for bipolar plate that avoids the micro pores and crevasses that are associated with vapor deposition or electroplating.

25 ENERGY STORAGE↗
DOE OSTI2026

Optimizing Porous Transport Layer Porosity for Proton Exchange Membrane Water Electrolysis

An empirical model is presented that describes anode-side losses related to porous transport layer (PTL) morphology in proton exchange membrane water electrolysis (PEMWE). The model is based on an advanced voltage breakdown analysis that links various overpotentials to PTL morphology. Custom Ti PTLs, spanning uncommonly low porosities (22 - 31%), were fabricated and analyzed with X-ray CT to obtain pore and particle size distributions. Particle size distributions were consistent across samples with an average particle diameter of 12.0?..mu..m, whereas average pore diameters ranged from 6.0 to 7.0?..mu..m. The PTLs were tested in standard PEMWE cell assemblies with anode catalyst loadings of 0.1 mgIr cm-2 to obtain polarization curves, electrochemical impedance spectra, and augmented Tafel analysis. The PTL-dependent anode side losses were deconvoluted and assigned to excess utilization, concentration, ion transport resistance, and electrical contact resistance overpotentials. The data and model reveal an optimal 20 - 28% PTL porosity region where utilization and contact resistance overpotentials are minimized without triggering concentration and ion transport losses related to water deprivation. The optimal PTL porosity depends on the operating current density and is demonstrated at realistic PEMWE water flow rates to establish PTL design guidance for operation at scale.

08 HYDROGEN↗
DOE OSTI2020

Synthesis and structural characterization of the new Zintl phases Ba 3 Cd 2 P 4 and Ba 2 Cd 2 P 3 . Rare example of small gap semiconducting behavior with negative thermopower within the range 300 K-700 K

The new Zintl phases Ba 3 Cd 2 P 4 and Ba 2 Cd 2 P 3 have been synthesized using Pb flux, which allowed for the growth of 4-5 mm large crystals. The structures were determined utilizing single-crystal X-ray diffraction methods. Both compounds crystalize in the monoclinic crystal system (space group C2/m (No. 12)) and their structures are closely related. The structure of Ba 3 Cd 2 P 4 can be seen as being comprised of divalent Ba atoms and conjoined CdP 4 tetrahedra in the form of [Cd 2 P 4 ] 6- layers. Within the layers, homoatomic P–P bonds are present, which if cleaved, leave two infinite [CdP 3 ] 7- chains running along the crystallographic b-axis. The other structure, that of Ba 2 Cd 2 P 3 , can be rationalized as also having divalent Ba atoms and conjoined CdP4 tetrahedra in the form of [Cd 2 P 3 ] 6- layers. These layers, again, can be visualized as chains that run down the crystallographic b-axis, which are further connected by P-P dimers. Electronic band structure calculations show that each structure has an optimal number of valence electrons, and therefore conform to the Zintl-Klemm concept. Accordingly, the two compounds can be considered small band gap semiconductors, with band gaps of ca. 0.1 eV and 0.6 eV for Ba3Cd2P4 and Ba 2 Cd 2 P 3 , respectively. Electrical resistivity measurements show that Ba3Cd2P4 displays a large resistivity value at room temperature and an experimental band gap of ca. 0.05 eV, which fits reasonably well with the theoretical predictions. Thermopower measurements show that throughout the temperature range 300 K-700 K, Ba 3 Cd 2 P 4 displays a negative Seebeck coefficient. Here, the extremum value of -84 μV is reached at 630 K, suggestive of an n-type semiconductor, a rarity among Zintl phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Transport properties and thermal behavior of YbMnSb 2 semimetal above room temperature

Single crystals of ytterbium manganese diantimonide, YbMnSb 2 have been grown from a high-temperature reaction of the elements, employing molten Sb as self-flux. This phase crystallizes in the tetragonal centrosymmetric space group P4/nmm (No. 129) and adopts the ZrCuSiAs structure type. Here, the structure consists of Sb-based square nets and PbO-type layers formed by fused [MnSb 4/4 ] tetrahedra. YbMnSb 2 is stable under ambient atmosphere and incongruently melts at a temperature of ca. 1120 K. In the temperature range from 300 K to 450 K, the electrical resistivity of the as-grown single-crystalline material is as low as 3.2 mΩ cm, while its thermopower is as high as 180 μV/K. As such, YbMnSb 2 shows promise for thermoelectric applications in the mid-temperature region, with an estimated power factor of 0.85–0.95 mW/(m K 2 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In-situ synchrotron X-ray study on microstructure and stress evolutions of electroplated copper upon self-annealing

Background: The self-annealing behavior of electroplated copper (Cu) at room temperature is gaining attention in the microelectronics industry due to its significant impact on reliability issues such as substrate warpage and electrical resistivity. Methods: In this study, in-situ analysis of the microstructure transition and stress relaxation of the electroplated copper upon self-annealing was conducted via synchrotron white X-ray nanodiffraction (beamline 21A, Taiwan Photon Source) and grazing-incidence X-ray diffraction (beamline 17B1, Taiwan Light Source). Significant Findings: Remarkable relaxations of deviatoric stress and absolute strain component along the [002] direction were closely related to the Cu grain growth and crystallographic reorientation at the early stage of selfannealing, and a complete stress/strain relaxation can be achieved with the cessation of microstructure transition. In conclusion, the in-situ synchrotron X-ray studies provided an insight into Cu self-annealing mechanism, offering valuable information for improving Cu interconnect reliability.

Cu Self-annealing↗
DOE OSTI2024

Measurements of displacement cross sections of metals for 120-GeV proton beam irradiation

The number of displacements per atom (dpa) is widely used as an indicator of irradiation damage of materials in proton accelerator facilities. Experiments have been carried out to validate the dpa of metallic materials for protons with energies below 3 GeV. However, measurements of the displacement cross-sections for high-energy protons above 3 GeV have not been carried out and the calculations have not been validated. To validate the displacement cross section of metals in high-energy region, electrical resistivity changes in wires of aluminum, copper and tungsten at 8 K were measured using protons with energies of 120-GeV. The results show that the Norgett-Robinson-Torrens dpa model of the Particle and Heavy Ion Transport Calculation Code overestimates the experimental data. On the other hand, the calculated results using the athermal recombination corrected dpa model were in agreement with the measured displacement cross sections. In the proton energy region above 1 GeV, the displacement cross section is almost constant, which is due to the fact that the damage energy of the material under 1 GeV proton irradiation is almost the same as under 120 GeV proton irradiation. Damage recovery of defects accumulated in the sample was also measured using isochronal annealing: At 80 K, approximately 60 % and 80 % of the damage remains for copper and tungsten, respectively. These results are the same as those obtained from other experiments on proton and neutron irradiation.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Anomalous behavior in high-pressure carbonaceous sulfur hydride

A new experimental study reported behavior in a high-pressure carbon-sulfur-hydrogen system that has been interpreted by the authors as superconductivity at room temperature. The sudden change of electrical resistance at a critical temperature and the change of the R vs. T behavior with an applied magnetic field point to superconductivity. This is a very exciting study in one of the most important areas of science, hence, it is crucial for the community to investigate these findings and hopefully reproduce these results. In this paper, we present calculations that expand upon the arguments put forth, and offer some speculations about physical mechanisms that might explain the observed data. Here, we show that there are errors in the analysis presented in the experimental paper, and with the correct analysis, the reported R vs. T data significantly deviate from the expected behavior. In particular, the extremely sharp change in resistance at the superconducting transition is not consistent with a strongly type II superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Superconductivity in MgTa 2 S 5

Superconductivity in the new compound, MgTa 2 S 5 , is reported. Its crystal structure was indexed to space group $C$2/$m$, which is monoclinic with lattice parameters $a$ = 5.784(5) $\mathring{A}$, $b$ = 12.680(3) $\mathring{A}$, and $c$ = 6.106(5) $\mathring{A}$, with $β$ = 112.64°. Electrical resistivity reveals metallic behavior with $ρ$(296 K) = 5.2 mΩ cm and bulk superconductivity below $T$ $c$ = 1 K. Measurements of the specific heat C reveal the electronic specific heat coefficient $γ$ = 11.1(5) mJ/mol K 2 , a jump in $C$ at $T$ $c$ illustrating bulk superconductivity, and an energy gap associated with the superconducting state of $E$ $g$ = 0.25(3) meV. MgTa 2 S 5 can be classified as a BCS superconductor. In conclusion, an unidentified minority phase present in the sample (~ 4%) exhibits a superconducting phase transition near 2.6 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗