Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “down conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Photoreactive Capture and Conversion of Dilute Carbon Dioxide into Synthetic Natural Gas

This study introduces a photoreactive system that integrates the capture of dilute CO 2 streams with their catalytic conversion to synthetic natural gas (CH 4 ), utilizing a Ru nanoparticle (NP)-doped TiO 2 composite loaded with linear polyethylenimine (L-PEI) and enhanced with plasmonic titanium nitride (TiN). This light-driven approach mitigates challenges that have plagued traditional thermal reactive carbon capture (RCC) methods, such as CO 2 slip and amine degradation. We demonstrate that L-PEI enables stable CO 2 capture and conversion, achieving ~70% conversion of captured CO 2 to CH 4 across multiple reaction cycles using nonflammable forming gas (~5% H 2 ) as the reductant. In contrast, branched PEI (B-PEI)-loaded composites exhibited significant catalyst deactivation after several RCC cycles. Scanning transmission electron microscopy (STEM) imaging confirms that significant sintering of the Ru NPs occur in the B-PEI sample under RCC conditions, whereas their size remains stable in more rigid L-PEI composites. Technoeconomic analysis (TEA) estimates that CH 4 production using this system could cost less than $\$$5/kg based on current electrocatalytic H 2 prices. These results represent one of the most promising demonstrations of amine-based RCC employing dilute CO 2 sources to date.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites

Brønsted (BAS), Lewis (LAS), and surface Brønsted (SBAS) acid sites have been investigated for polyethylene (PE) upcycling by zeolite catalysts, but there is no clear consensus regarding their catalytic roles, partly due to the complexity of the catalysts used and varying reaction conditions across studies. This work systematically determined how these sites impact PE conversion rates and product distributions by utilizing a suite of microporous MFI catalysts with varying Si/Al ratios, acid site densities, and inherent mesoporosities. PE conversion rates did not trend with total BAS or LAS densities due to a combination of internal mass transfer limitation and the apparent inability of LAS alone to cleave C–C bonds, but a strong, statistically significant correlation was present with respect to SBAS density and mesopore surface area, jointly, owing to accelerated polymer activation on external surfaces to smaller diffusion-limited chains. However, ingress of these SBAS-derived fragments ultimately remained rate limiting, as demonstrated by solid conversion rates that increased with mesopore surface area at similar SBAS density and likewise increased with SBAS density at similar mesopore surface area. In batch PE cracking reactions, light gaseous product selectivities were most sensitive to total BAS, with higher densities generally exhibiting higher selectivity to C 3 and linear C 4 –C 7 products and higher alkane/alkene product ratios, consistent with increased β-scission turnovers. Insights from this work help systematically clarify the roles of BAS, LAS, SBAS, and mesopores in PE cracking reactions and inform the development of tailored zeolite catalysts for efficient polyolefin upcycling.

accessibility↗
DOE OSTI2024

Maximum and Comparative Efficiency Calculations for Integrated Capture and Electrochemical Conversion of CO 2

CO 2 as a C1 feedstock is receiving increasing attention, but it typically exists in dilute or impure streams. The capture and conversion of CO 2 to fuels or chemicals using carbon-neutral energy mitigates carbon emissions when CO 2 is captured from point sources and results in net or negative carbon emissions when CO 2 is obtained by direct air capture. Additionally, CO 2 capture and conversion steps are typically viewed as separate processes that optimize either capture and concentration or catalytic conversions of pure streams of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

CO 2 Conversion to Butene via a Tandem Photovoltaic–Electrochemical/Photothermocatalytic Process: A Co-design Approach to Coupled Microenvironments

Here, we developed a tandem, unassisted, solar-driven electrochemical and photothermocatalytic process for the single-pass conversion of CO 2 to butene using only simulated solar irradiation as the energetic input. The two-step process involves electrochemical CO 2 reduction (CO 2 R) to ethylene followed by ethylene dimerization to butene. We assessed two unassisted electrochemical setups to concentrate ethylene in the CO 2 R reactor, achieving concentrations up to 5.4 vol.% with 1.8% average solar-to-ethylene conversion and 5.6% average CO 2 -to-ethylene single-pass conversion under 1-sun illumination. When passed through the photothermocatalytic ethylene oligomerization reactor, we generated 600 ppm of butene under 3-sun illumination. Through analysis of this process, we identified that the presence of H 2 , CO, and H 2 O leads to rapid deactivation of the Ni-based ethylene oligomerization catalyst.

14 SOLAR ENERGY↗
DOE OSTI2020

Investigation of a Lignin-Based Deep Eutectic Solvent Using p -Hydroxybenzoic Acid for Efficient Woody Biomass Conversion

Deep eutectic solvents (DESs) are effective solvents for biomass conversion and have been proposed as alternatives to ionic liquids (ILs). In this paper, we first report an effective pretreatment of woody biomass using a novel hardwood lignin-based DES prepared from p -hydroxybenzoic acid (PB) and choline chloride (ChCl), which are used as the hydrogen bond donor and acceptor, respectively. The impacts of the ChCl-PB DES on structural properties and enzymatic hydrolysis of poplar wood were comprehensively evaluated. The performance of ChCl-PB DES was also compared with two other DESs with p -coumaric acid (PCA) and 4-hydroxybenzaldehyde (PHA) as the hydrogen bond donors, which have been successfully applied to herbaceous biomass conversion in previous studies. The results showed that hemicellulose and lignin were effectively fractionated during the proposed ChCl-PB DES pretreatment under a relatively mild temperature. The ChCl-PB DES pretreatment resulted in up to 69% of delignification, and the pretreated poplar residues had over 90% of glucose yield by a 72 h-enzymatic hydrolysis. Transformation of poplar biomass during the DES pretreatment was evaluated by gel permeation chromatography (GPC), two-dimensional heteronuclear single quantum coherence (2D-HSQC), and 31 P nuclear magnetic resonance (NMR) spectroscopies. The recovered lignin showed relatively high purity, narrow molecular weight distribution (PDI < 1.6), and relatively low molecular weight (~1400 g/mol for M w ). A sustainable process was achieved by recycling DES as well as the utilization of PB, which is a producible aromatic compound from hardwood lignin, for the proposed DES formation in the system. This study indicates that the proposed novel DES with a hardwood lignin-based PB compound is a promising pretreatment solvent to achieve an economically feasible biomass conversion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unveiling Feedstock Variability: Insights into Corn Stover Conversion - Part I: Physicochemical Properties and Self-Degradation

Transforming agricultural waste into biofuels and bioproducts is crucial to advancing a low-carbon bioeconomy. However, the inherent variability in the composition and quality introduces uncertainties in the conversion efficiency and poses challenges in process development. Through integrating a high-throughput conversion system, material characterization techniques, and advanced data analysis tools, this study investigates the variability of corn stover and its subsequent impacts on carbohydrate conversion. The findings reveal that indoor storage substantially reduces the moisture and ash content and soil contamination, while other properties remain largely unchanged. Self-degradation due to microbial activity during storage decreases the carbohydrate content of corn stover but enhances glucose and xylose yields. A negative correlation is observed between sugar yields and lignin content across samples with varying ash and moisture content. The inhibitory effect of lignin diminishes in self-degraded samples likely due to the disrupted cell wall structure. Although self-degradation slightly increases cellulose crystallinity, no strong correlation was observed between the crystallinity and sugar yield. Hot water pretreatment under mild conditions effectively mitigates inherent variability, consistently improving the sugar yield from corn stover by up to 50%. By elucidating the feedstock variability and its impact on convertibility, these findings offer valuable insights into appropriate feedstock handling and management, highlighting potential strategies to address variability challenges.

09 BIOMASS FUELS↗
DOE OSTI2022

Revitalizing Iron Redox by Anion-Insertion-Assisted Ferro- and Ferri-Hydroxides Conversion at Low Alkalinity

Iron hydroxides are desirable alkaline battery electrodes for low cost and environmental beneficence. However, hydrogen evolution on charging and Fe 3 O 4 formation on discharging cause low storage capacity and poor cycling life. Here, we report that green rust (GR) (Fe 2+ 4 Fe 3+ 2 (HO – ) 12 SO 4 ), formed via sulfate insertion, promotes Fe(OH) 2 /FeOOH conversion and shows a discharge capacity of ~211 mAh g –1 in half-cells and Coulombic efficiency of 93% after 300 cycles in full-cells. Theoretical calculations show that Fe(OH) 2 /FeOOH conversion is facilitated by intercalated sulfate anions. Classical molecular dynamics simulations reveal that electrolyte alkalinity strongly impacts the energetics of sulfate solvation, and low alkalinity ensures fast transport of sulfate ions. Anion-insertion-assisted Fe(OH) 2 /FeOOH conversion, also achieved with Cl – ion, paves a pathway toward efficient utilization of Fe-based electrodes for sustainable applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Photosynthetic Biohybrid System for Enhanced Abiotic N 2 -to-NH 3 Conversion under Ambient Conditions

Photosynthetic biohybrid systems (PBSs) offer an eco-friendly approach to transforming solar energy into value-added products by integrating biological entities with inorganic semiconductors. However, the chemical conversion capacity of most PBSs has inherent limitations, as whole-cell bacteria and isolated enzymes require fine-tuning of environmental conditions. Here, in this study, we report a new PBS developed by introducing free-standing ceria nanoparticles into the purple membrane (PM) of Halobacterium salinarum archaea, which can unidirectionally transfer charge carriers in response to incident photons, even after separation from living archaea at various conditions. Our microscopy, spectroscopy, and synchrotron X-ray scattering analyses confirm that the electrostatic assembly between ceria and PM creates seamless interfacial contact, thereby enhancing the photocatalytic capacity of ceria. Although the conversion of dinitrogen (N 2 ) to ammonia (NH 3 ) is thermodynamically challenging due to the triple bond in N 2 and a series of charge-transfer reactions, our PM–ceria (PMC) hybrid nanoparticle efficiently produces NH 3 by reducing N 2 using solar energy even under atmospheric pressure and room temperature while simultaneously converting glycerol into value-added derivatives. Additionally, our PMC nanoparticle involves neither toxic/precious metals nor bioengineering processes to achieve enhanced photocatalytic N 2 -to-NH 3 conversion. This study sheds light on the new aspect of PBSs by employing PM to potentially resolve the global energy and environmental challenges posed by the conventional Haber–Bosch process.

Jang, Jinhyeong [Argonne National Laboratory (ANL)↗
DOE OSTI2023

Energy conversion and storage via photoinduced polarization change in non-ferroelectric molecular [CoGa] crystals

To alleviate the energy and environmental crisis, in the last decades, energy harvesting by utilizing optical control has emerged as a promising solution. Here we report a polar crystal that exhibits photoenergy conversion and energy storage upon light irradiation. The polar crystal consists of dinuclear [CoGa] molecules, which are oriented in a uniform direction inside the crystal lattice. Irradiation with green light induces a directional intramolecular electron transfer from the ligand to a low-spin Co III centre, and the resultant light-induced high-spin Co II excited state is trapped at low temperature, realizing energy storage. Additionally, electric current release is observed during relaxation from the trapped light-induced metastable state to the ground state, because the intramolecular electron transfer in the relaxation process is accompanied with macroscopic polarization switching at the single-crystal level. It demonstrates that energy storage and conversion to electrical energy is realized in the [CoGa] crystals, which is different from typical polar pyroelectric compounds that exhibit the conversion of thermal energy into electricity.

25 ENERGY STORAGE↗
DOE OSTI2025

Solar-driven selective conversion of millimolar dissolved carbon to fuels with molecular flux generation

Abstract The direct utilization of dissolved inorganic carbon in seawater for CO 2 conversion promises chemical production on-demand and with zero carbon footprint. Photoelectrochemical (PEC) CO 2 reduction (CO 2 R) devices promise the sustainable conversion of dissolved carbon in seawater to carbon products using sunlight as the only energy input. However, the diffusion-dominant transport mechanism and the near-zero concentration of CO 2 (aq) (CO 2 dissolved in aqueous solution) in static seawater has made it extremely challenging to achieve high solar-to-fuel (STF) efficiency and high carbon-product selectivity. Here, where CO 2 (aq) as a reactant generated in situ by acidification of HCO 3 - flows continuously from BiVO 4 photoanodes to Si photocathodes, enabling a single-step conversion of dissolved carbon into products. Our PEC device significantly increases the CO selectivity from 3% to 21%, which approaches the 30% theoretical limit according to multi-physics modeling. Meanwhile, the Si/BiVO 4 PEC CO 2 R device achieved a STF efficiency of 0.71%. Such flow engineering achieves flow-dependent selectivity, rate, and stability in simulated seawater, thus promising practical solar fuel production at scale.

Liu, Bin↗
DOE OSTI2026

Catalytic conversion of cellulose and its derived sugars to 5-Hydroxymethylfurfural, levulinate esters, and sorbitol: a comprehensive review

Cellulose, an abundant, renewable, and sustainable non-edible carbon source from agriculture and forestry, has attracted great attention for producing diverse value-added chemicals and fuels. However, the rigid 3D structure of cellulose, maintained by an extensive hydrogen bonding network, hinders chemical conversion, requiring effective pretreatment to break down the crystalline structure. High-value cellulose-derived compounds such as 5-hydroxymethylfurfural (5-HMF), levulinate esters, and sorbitol, recognized as critical platform chemicals by the U.S. Department of Energy, are particularly attractive for versatile applications. This review provides a comprehensive overview of methodologies for the chemical synthesis of 5-HMF, levulinate esters, and sorbitol, focusing on direct catalytic conversion of cellulose. It delves into recent advancements in reaction systems and catalysts, highlighting catalytic pathways, selectivity, strategies for process optimization, and computational approaches, while discussing the challenges associated with the catalytic conversion of cellulose into these high-value products and offering potential strategies for enhancing future catalytic processes.

Huang, Kaixuan [Yancheng Teachers Univ. (China); N↗
DOE OSTI2022

Enabling technologies for the continuous electrically driven conversion of CO 2 and water to multi-carbon products at high current densities

Here, we demonstrate greatly improved conversion of CO 2 using a gas diffusion electrode (GDE) with flowing electrolyte configuration for CO 2 gas delivery in combination with a high surface area nickel phosphide electrocatalyst. This configuration achieves 40–50% selectivity for total carbon products over H 2 formation (HER) at total current densities ranging from 50 to 300 mA cm -2 . We developed a soft-templating method using CTAB detergent micelles for synthesis of phase-pure Ni 2 P, achieving a 260-fold larger surface area (BET) and porous sponge-like morphology that produces stable currents. This catalyst produces mainly one C-product, methylglyoxal (MG, C 3 H 4 O 2 ) with 38–47% overall selectivity, the highest reported selectivity for a 12-electron reduction product. The versatile soft-templating method for electrocatalyst synthesis uses low-temperature (185 °C) that is permissive for incorporation of co-catalysts that are otherwise destroyed by the high temperatures used in traditional solid-state synthesis (SSS). The non-porous Ni 2 P-SSS catalyst produces mainly H 2 at these current densities. Achieving these high currents and C/H selectivity benefits from use of hydrophobic polymers as co-catalyst binders (cationic = Nafion, anionic = PFAEM and neutral = PTFE) to improve CO 2 conversion. PFAEM is the better ionomer for the CO 2 RR at high current density, postulated as due to suppressing CO 2 conversion to inactive bicarbonate. Precipitation of the carbon products as a polycarbonate polymer occurs at high currents.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Decoupling plasma, catalyst, and gaseous mechanisms for non-oxidative methane conversion

Direct non-oxidative methane (CH 4 ) conversion to value-added hydrogen (H 2 ) and C 2 products remains hindered by fundamental catalytic scaling constraints and rapid surface deactivation at elevated temperatures. Plasma-enabled catalysis offers a promising route to overcome the thermodynamic and kinetic barriers of direct non-oxidative methane upgrading at mild conditions, yet control over C–C product selectivity and catalyst stability remains elusive. Here, we establish a unified mechanistic framework including Langmuir–Hinshelwood (L–H) and Langmuir–Rideal (L–R) mechanisms that disentangles the roles of plasma excitation (including vibrationally activated species and radicals), surface temperature (T sur ), and catalyst binding energy in steering CH 4 conversion to H 2 and C 2 hydrocarbons. Through a combination of density functional theory (DFT) informed microkinetic modeling, in situ and ex situ surface characterization, and product quantification under dielectric barrier discharge conditions, we show that vibrationally excited CH 4 lowers activation barriers selectively for dissociative chemisorption, enabling surface activation across a wide range of transition metal catalysts at low thermal energy input. We find that once CH 4 is dissociatively chemisorbed, the branching between C 2 H 2 , C 2 H 4 , and C 2 H 6 is governed by surface properties (carbon binding energy, T sur , etc), regardless of plasma excitation. The DFT informed microkinetic model decouples the effects of molecular activation from surface properties and indentifies operating windows that maximize target yields while suppressing carbon accumulation and subsequent catalytic inactivation. Experiments on polycrystalline Cu/Al 2 O 3 , Ni/Al 2 O 3 , and Pt/Al 2 O 3 validate these predictions, revealing catalyst-dependent branching toward ethane or ethylene and distinct deactivation profiles. We unify these trends into a generalized three-dimensional plasma-thermal-catalytic design space, from which reduced descriptors such as T vib /T sur in the limit of vibrationally excited L–H pathways emerge as predictive metrics. These results enable rational tuning of methane conversion pathways and unlock selective C 2 formation using earth-abundant metals under mild plasma conditions.

catalyst inactivation↗
DOE OSTI2021

Axion-photon conversion in strongly magnetised plasmas

Axion dark matter can resonantly convert to photons in the magnetosphere of neutron stars, possibly giving rise to radio signals observable on Earth. This method for the indirect detection of axion dark matter has recently received significant attention in the literature. The calculation of the radio signal is complicated by a number of effects; most importantly, the gravitational infall of the axions onto the neutron star accelerates them to semi-relativistic speed, and the neutron star magnetosphere is highly anisotropic. Both of these factors complicate the calculation of the conversion of axions to photons. In this work, we present the first fully three-dimensional calculation of the axion-photon conversion in highly magnetised anisotropic media. Depending on the axion trajectory, this calculation leads to orders-of-magnitude differences in the conversion compared to the simplified one-dimensional calculation used so far in the literature, altering the directionality of the produced photons. Our results will have important implications for the radio signal one would observe in a telescope.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Next-to-leading order scalar contributions to 𝜇→𝑒 conversion

Within a class of models in which lepton flavor violation is induced dominantly by scalar particle exchanges, we estimate the 𝜇→𝑒 conversion rate in several nuclei. We include next-to-leading order (NLO) terms in the one- and two-nucleon interactions in chiral effective theory, rectifying some incorrect results in the previous literature. We provide an uncertainty budget for the conversion rates and we find that NLO contributions affect the amplitudes at the level of 10%, which could be larger than the uncertainty on the leading order couplings, dominated by the strange and nonstrange nucleon sigma terms. We study the implications of our results for testing Higgs-mediated charged lepton flavor violation (CLFV) in the future by combining results from various experimental searches, such as 𝜇→𝑒 conversion in multiple target nuclei and 𝜇→𝑒⁢𝛾.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Collisions and collective flavor conversion: Integrating out the fast dynamics

In dense astrophysical environments, notably core-collapse supernovae and neutron star mergers, neutrino-neutrino forward scattering can spawn flavor conversion on very short scales. Scattering with the background medium can impact collective flavor conversion in various ways, either damping oscillations or possibly setting off novel collisional flavor instabilities (CFIs). A key feature in this process is the slowness of collisions compared to the much faster dynamics of neutrino-neutrino refraction. Assuming spatial homogeneity, we leverage this hierarchy of scales to simplify the description accounting only for the slow dynamics driven by collisions. We illustrate our new approach both in the case of CFIs and in the case of fast instabilities damped by collisions. In both cases, our strategy provides new equations, the , that simplify the description of flavor conversion and allow us to qualitatively understand the final state of the system after the instability, either collisional or fast, has saturated. Published by the American Physical Society 2024

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Axionlike-particle contributions to the μ → e conversion

We study the μ → e conversion process in nuclear targets arising in models of axionlike particles (ALPs) with hadronic and charged lepton flavor violating (CLFV) interactions. Contributions to this process generally fall into two categories: spin-independent (SI) and spin-dependent (SD). While the SI contribution can be generated by a dipole operator through purely leptonic ALP interactions, the SD contribution can also be present through ALP-quark interactions at tree-level. It is naively anticipated that the SI contribution would be dominant due to its coherent enhancement. In this paper, we show that is not generically the case; in particular, for naturally sized ALP couplings to quarks of order ∼ m q / f a , the SD interaction induced by ALP- π 0 mixing turns out to be the leading contribution to μ → e conversion. Intuitively, this stems from the suppressed dipole contribution by the QED one-loop factor which counters the effect of SI coherent enhancement. Our study highlights the importance of μ → e conversion searches in exploring the parameter space of generic ALP models, and demonstrates the competitiveness of these searches in probing the CLFV ALP parameter space in the heavy mass range of m a ≳ m μ . Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Axion magnetic resonance: A novel enhancement in axion-photon conversion

We identify a new resonance, axion magnetic resonance, that can greatly enhance the conversion rate between axions and photons. A series of axion search experiments rely on converting them into photons inside a constant magnetic field background. A common bottleneck of such experiments is the conversion amplitude being suppressed by the axion mass when m a ≳ 10 − 4 eV . We point out that a spatial or temporal variation in the magnetic field can cancel the difference between the photon dispersion relation and that of the axion, hence greatly enhancing the conversion probability. We demonstrate that the enhancement can be achieved by both a helical magnetic field profile and a harmonic oscillation of the magnitude. Our approach can extend the projected ALPS II reach in the axion-photon coupling ( g a γ ) by two orders of magnitude at m a = 10 − 3 eV with moderate assumptions (see .) Published by the American Physical Society 2024

79 ASTRONOMY AND ASTROPHYSICS↗