Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distance measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

H-alpha observations of four novae in M31

On-line off-line H-alpha plates of M31's nucleus revealed four bright stellar objects (m sub R being approximately 14.9, 15.0, 15.8, 16.4) within 1.2 kpc of the galaxy center. Spectrophotometric observations made 10 days later showed the stars were novae in the stage of early decline. In the 10 day interval, the H-alpha emission from these novae faded less than a magnitude, despite the fact that their continua had long since faded from view. The high luminosity and long decay time of the H-alpha emission suggest it might make an excellent standard candle for extragalactic distance measurements.

Jacoby, G.↗

Research on computer aided testing of pilot response to critical in-flight events

Experiments on pilot decision making are described. The development of models of pilot decision making in critical in flight events (CIFE) are emphasized. The following tests are reported on the development of: (1) a frame system representation describing how pilots use their knowledge in a fault diagnosis task; (2) assessment of script norms, distance measures, and Markov models developed from computer aided testing (CAT) data; and (3) performance ranking of subject data. It is demonstrated that interactive computer aided testing either by touch CRT's or personal computers is a useful research and training device for measuring pilot information management in diagnosing system failures in simulated flight situations. Performance is dictated by knowledge of aircraft sybsystems, initial pilot structuring of the failure symptoms and efficient testing of plausible causal hypotheses.

Giffin, W. C.↗

Comparison of various drag coefficient expansions using polynomials and splines

The longitudinal differential equation of motion has been used to investigate various aerodynamic expansion techniques. The total drag coefficient was expanded using conventional polynomials and splines with and without floating knot locations. This paper discusses the various techniques and approaches, compares results obtained from simultaneously fitting four separate flights (time vs distance measurements) and outlines the potential advantages and/or disadvantages of the various aerodynamic expansion techniques. It is believed that this is the first time splines have been used in the aerodynamic coefficient estimation process and that these results and techniques are germane to other applications.

Sabot, S. M.↗

Analysis of Cerenkov pulses recorded simultaneously at two sites

The agreement between measured distances to maximum for approx. 49 simultaneous Cerenkov pulse profiles from different sites is + or - approx. 0.1 km near 4.5 km and + or - 0.5 km near 7 km. Uncertainty in depths of maximum are approx. + or - 10 g sq and + or - 30 g cm/2 respectively. Usually the Hillas-Patterson simulation is able to fit both pulse shapes satisfactorily using a single N(x) profile.

Liebing, D. F.↗

In-Flight Simulator for IFR Training

Computer-controlled unit feeds navigation signals to airplane instruments. Electronic training system allows students to learn to fly according to instrument flight rules (IFR) in uncrowded airspace. New system self-contained IFR simulator carried aboard training plane. Generates signals and commands for standard instruments on airplane, including navigational receiver, distance-measuring equipment, automatic direction finder, a marker-beacon receiver, altimeter, airspeed indicator, and heading indicator.

Parker, L. C.↗

Laser Ranging System

Laser system points and focuses TV camera. Ranger is modified stock distance-measuring unit mounted on and electrically connected to television camera. Effective over target range of 3 to 500 ft. (approximately 1 to 150m). Developed for television monitoring of nearby objects from Space Shuttle. Super-imposes range and range-rate (speed of approach or recession) data on television image of target. Principle adaptable to applications such as proximity warning and robot control.

Russell, J. K.↗

Measuring Continuous-Path Accuracies of Robots

Sensors yield data on deviation from predetermined path and speed. Accuracy and repeatability of continuous-path robot motion measured with new method. Determines ability of robot to maintain tool orientation. Used with any type of manipulator arm and with separate, coordinated part positioner. Noncontacting eddy-current sensors measure distance from tool to aluminum path plate as robot end effector moves tool at prescribed distance from plate. Flat, sloped, curved, and other shapes used for path plate.

Allison, T. A.↗

Range finding using frequency-modulated laser diode

A coherent-optical time-of-flight range-finding technique is proposed which uses a simple inexpensive device. Target range is determined by modulating a laser diode's optical frequency and measuring the change in the phase of the light reflected back into the laser. Target velocity as well as range can be measured using this approach. The device is described, and experimental evidence is presented to show the feasibility of measuring distance with subcentimeter resolution over a 1.5-m range.

Beheim, G.↗

Measuring Room Area or Volume Electronically

Area- and volume-measuring instrument hand-held or mounted on tripod. Instrument rapidly measures distances to walls, ceiling, or floor at many viewing angles and automatically computes area or volume of room. Results obtained rapidly with minimal effort.

Kavaya, M. J.↗

Astronomy on a manned Mars mission

Three extra-solar-system astronomical experiments onboard a manned Mars mission are proposed. First, a modest, 50 cm aperture optical-ultraviolet-infrared telescope (or pair used as an interferometer) coupled with the Mars-Sun baseline would increase the number (by a factor of 3.4) and a volume of stars with accurately measured distances via stellar parallax and, therefore, greatly improve upon the cosmic distance scale; the darker sky at Mars would also provide nearly a full astronomical magnitude deeper images of distant and low brightness objects (limited by zodiacal light). Second, a gamma-ray burst detector coupled with similar detectors in other parts of the solar system will be used to reduce the position error boxes and to study the nature of these energetic sources. Third, the long baselines on a Mars mission radio interferometer will provide a view of the radio universe at unprescedented resolution, 4 x 10 to the minus 9th arcsec at 1 mm wavelength, which can potentially resolve the engine in nearby active galaxies. Each of these experiments is relatively inexpensive, taking advantage of the human presence for operation and maintenance, and the long Earth to Mars baseline.

Burns, Jack O.↗

Remote sensing of earth terrain

A systematic approach for the identification of terrain media such as vegetation canopy, forest, and snow covered fields is developed using the optimum polarimetric classifier. The covariance matrices for the various terrain cover are computed from theoretical models of random medium by evaluating the full polarimetric scattering matrix elements. The optimal classification scheme makes use of a quadratic distance measure and is applied to classify a vegetation canopy consisting of both trees and grass. Experimentally measured data are used to validate the classification scheme. Theoretical probability of classification error using the full polarimetric matrix are compared with classification based on single features including the phase difference between the VV and HH polarization returns. It is shown that the full polarimetric results are optimal and provide better classification performance than single feature measurements.

Kong, J. A.↗

Mass distribution and evolutionary scheme for central stars of planetary nebulae

IUE data and a distance measuring method that considered central stars in optically thick nebulae were used to examine mass distributions of planetary nebulae. Other data such as spectral type, spatial and kinematic characteristics, etc., were studied to derive relationships between population type and mass distribution. A central star mass range of at least 0.55 solar mass was obtained. Stars with masses of at least 0.64 solar mass, concentrated in the galactic disk, originated from 1.5 solar mass stars. Low mass nuclei originated in old disk or halo populations and evolved from 1.0 solar mass objects. A mass-loss parameter value of 1/3 was calculated for red giants, implying that white dwarfs evolve from stars of under 5 solar masses. Mass distributions around planetary nuclei were concluded to follow patterns associated with the individual mass.

Heap, Sara R.↗

The design of trellis codes for fading channels

The appropriate criterion for optimum trellis coded modulation design on the additive white Gaussian noise channel is maximization of the free Euclidean distance. When trellis coded modulation is used on a Rician fading channel with interleaving/deinterleaving, the design of the code for optimum performance is guided by other factors, in particular the length of the shortest error event path, and the product of branch distances (possibly normalized by the Euclidean distance of the path) along that path. Although maximum free distance (d sub free) is still an important consideration, it plays a less significant role the more severe the fading is on the channel. These considerations lead to the definition of a new distance measure for optimization of trellis codes transmitted over Rician fading channels. If no interleaving/deinterleaving is used, then once again the design of the trellis code is guided by maximizing d sub free. It is also shown that allowing for multiple symbols per trellis branch, i.e., multiple trellis coded modulation (MTCM), provides an additional degree of freedom for designing a code to meet the above optimization criteria on the fading channel. It is here where the MTCM technique exploits its full potential.

Divsalar, Dariush↗

Remote sensing of earth terrain

A systematic approach for the identification of terrain media such as vegetation canopy, forest, and snow covered fields is developed using the optimum polarimetric classifier. The covariance matrices for the various terrain covers are computed from the theoretical models of random medium by evaluating the full polarimetric scattering matrix elements. The optimal classification scheme makes use of a quadratic distance measure and is applied to classify a vegetation canopy consisting of both trees and grass. Experimentally measured data are used to validate the classification scheme. Theoretical probability of classification error using the full polarimetric matrix are compared with classification based on single features including the phase difference between the VV and HH polarization returns. It is shown that the full polarimetric results are optimal and provide better classification performance than single feature measurements. A systematic approach is presented for obtaining the optimal polarimetric matched filter which produces maximum contrast between two scattering classes, each represented by its respective covariance matrix.

Kong, J. A.↗

Accurate positioning of long, flexible ARM's (Articulated Robotic Manipulator)

An articulated robotic manipulator (ARM) system is being designed for space applications. Work being done on a concept utilizing an infinitely stiff laser beam for position reference is summarized. The laser beam is projected along the segments of the ARM, and the position is sensed by the beam rider modules (BRM) mounted on the distal ends of the segments. The BRM concept is the heart of the system. It utilizes a combination of lateral displacements and rotational and distance measurement sensors. These determine the relative position of the two ends of the segments with respect to each other in six degrees of freedom. The BRM measurement devices contain microprocessor controlled data acquisition and active positioning components. An indirect adaptive controller is used to accurately control the position of the ARM.

Malachowski, Michael J.↗

Identification of terrain cover using the optimum polarimetric classifier

A systematic approach for the identification of terrain media such as vegetation canopy, forest, and snow-covered fields is developed using the optimum polarimetric classifier. The covariance matrices for various terrain cover are computed from theoretical models of random medium by evaluating the scattering matrix elements. The optimal classification scheme makes use of a quadratic distance measure and is applied to classify a vegetation canopy consisting of both trees and grass. Experimentally measured data are used to validate the classification scheme. Analytical and Monte Carlo simulated classification errors using the fully polarimetric feature vector are compared with classification based on single features which include the phase difference between the VV and HH polarization returns. It is shown that the full polarimetric results are optimal and provide better classification performance than single feature measurements.

Kong, J. A.↗

Light propagation in inhomogeneous universes - The ray-shooting method

The propagation of light in a clumpy universe is studied using the ray-shooting method. It is found that 'empty cones' in a clumpy universe are rare, which points out the limitation of frequently used distance measures in an inhomogeneous universe. The results show some qualitatively new features of multiple-gravitational-lens geometry, and a likely explanation for these features is presented. A statistical analysis of the simulations give amplification probability distributions for extended sources, as well as the distribution for the ratio of amplifications of compact sources to amplifications of more extended sources. Sample light curves of individual sources are obtained. Finally, the results support the validity of recent investigations on the influence of gravitational light deflection on source counts of compact extragalactic objects.

Schneider, Peter↗

The design of trellis coded MPSK for fading channels: Performance criteria

It has been well established that the appropriate criterion for optimum trellis-coded modulation design on the additive white Gaussian noise channel is maximization of the free Euclidean distance. It is shown that when the trellis-coded modulation is used on a Rician fading channel with interleaving/deinterleaving, the design of the code of optimum performance is guided by other factors, in particular, the length of the shortest error-event path, and the product of branch distances (possibly normalized by the Euclidean distance of the path) along the path. Athough maximum free distance (dfree) is still an important consideration, it plays a less significant role the more severe the fading is on the channel. These considerations lead to the definition of a new distance measure of optimization of trellis codes transmitted over Rician fading channels. If no interleaving/deinterleaving is used, then once again the design of the trellis code is guided by maximizing dfree.

Divsalar, Dariush↗