Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “discretization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Solving Inverse Stochastic Problems from Discrete Particle Observations Using the Fokker--Planck Equation and Physics-Informed Neural Networks

The Fokker--Planck (FP) equation governing the evolution of the probability density function (PDF) is applicable to many disciplines, but it requires specification of the coefficients for each case, which can be functions of space-time and not just constants and hence require the development of a data-driven modeling approach. When the data available is directly on the PDF, there exist methods for inverse problems that can be employed to infer the coefficients and thus determine the FP equation and subsequently obtain its solution. Herein, we address a more realistic scenario, where only sparse data are given on the particles' positions at a few time instants, which are not sufficient to accurately construct directly the PDF even at those times from existing methods, e.g., kernel estimation algorithms. To this end, we develop a general framework based on physics-informed neural networks (PINNs) that introduces a new loss function using the Kullback--Leibler divergence to connect the stochastic samples with the FP equation to simultaneously learn the equation and infer the multidimensional PDF at all times. In particular, we consider two types of inverse problems, type I, where the FP equation is known but the initial PDF is unknown, and type II, in which, in addition to the unknown initial PDF, the drift and diffusion terms are also unknown. In both cases, we investigate problems with either Brownian or Lévy noise or a combination of both. Here, we demonstrate the new PINN framework in detail in the one-dimensional (1D) case, but we also provide results for up to five dimensions demonstrating that we can infer both the FP equation and dynamics simultaneously at all times with high accuracy using only very few discrete observations of the particles.

97 MATHEMATICS AND COMPUTING↗

Space-Split Algorithm for Sensitivity Analysis of Discrete Chaotic Systems With Multidimensional Unstable Manifolds

Accurate approximations of the change of a system's output and its statistics with respect to the input are highly desired in computational dynamics. Ruelle's linear response theory provides breakthrough mathematical machinery for computing the linear response of chaotic dynamical systems. In this paper, we propose an algorithm for sensitivity analysis of discrete chaos with an arbitrary number of positive Lyapunov exponents. We combine the concept of perturbation space-splitting, which regularizes Ruelle's original expression, together with measure-based parameterization of the expanding subspace. We use these tools to rigorously derive trajectory-following recursive relations that converge exponentially fast, and construct a memory-efficient Monte Carlo scheme for derivatives of the output statistics. Thanks to the regularization and lack of simplifying assumptions on the system's behavior, our method is immune to the common problems of other popular methods such as the exploding tangent solutions and unphysical shadowing directions. Here, we provide a ready-to-use algorithm, analyze its complexity, and demonstrate several numerical examples of sensitivity computation using physically-inspired low-dimensional systems.

97 MATHEMATICS AND COMPUTING↗

Mixture density network estimation of continuous variable maximum likelihood using discrete training samples

Abstract Mixture density networks (MDNs) can be used to generate posterior density functions of model parameters $$\varvec{\theta }$$ θ given a set of observables $${\mathbf {x}}$$ x . In some applications, training data are available only for discrete values of a continuous parameter $$\varvec{\theta }$$ θ . In such situations, a number of performance-limiting issues arise which can result in biased estimates. We demonstrate the usage of MDNs for parameter estimation, discuss the origins of the biases, and propose a corrective method for each issue.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scalability of OpenFOAM Density-Based Solver with Runge–Kutta Temporal Discretization Scheme

Compressible density-based solvers are widely used in OpenFOAM, and the parallel scalability of these solvers is crucial for large-scale simulations. In this paper, we report our experiences with the scalability of OpenFOAM’s native rhoCentralFoam solver, and by making a small number of modifications to it, we show the degree to which the scalability of the solver can be improved. The main modification made is to replace the first-order accurate Euler scheme in rhoCentralFoam with a third-order accurate, four-stage Runge-Kutta or RK4 scheme for the time integration. The scaling test we used is the transonic flow over the ONERA M6 wing. This is a common validation test for compressible flows solvers in aerospace and other engineering applications. Numerical experiments show that our modified solver, referred to as rhoCentralRK4Foam, for the same spatial discretization, achieves as much as a 123.2% improvement in scalability over the rhoCentralFoam solver. As expected, the better time resolution of the Runge–Kutta scheme makes it more suitable for unsteady problems such as the Taylor–Green vortex decay where the new solver showed a 50% decrease in the overall time-to-solution compared to rhoCentralFoam to get to the final solution with the same numerical accuracy. Finally, the improved scalability can be traced to the improvement of the computation to communication ratio obtained by substituting the RK4 scheme in place of the Euler scheme. All numerical tests were conducted on a Cray XC40 parallel system, Theta, at Argonne National Laboratory.

Li, Sibo↗

Devastator Parallel Discrete Event Simulation Runtime (Devastator) v1.0

The Devastator runtime is a modern C++ implementation of optimistic parallel discrete event simulation methods. Devastator allows simulation application code to productively specify their component and event functionality with C++14 constructs. It utilizes GASNet-EX for distributed memory communication and includes parallel performance optimizations such as light-weight thread message queues and asynchronous GVT. Furthermore, it supports efficient event broadcasts and pause-rewind-resume functionality to support periodic load balancing and outer loop optimization algorithms.

Chan, Cy↗

BDEM (Discrete-element-simulator for high-solids granular flows) [SWR-22-72]

BDEM is a discrete element method based simulation tool developed specifically for modeling high-solids granular flows that include polydispersity, heat-transfer, moving boundaries and chemistry. Our solver provides facilities for simulating spherical/non-spherical particles with modified contact and friction models in complex dynamic geometries defined using level-sets or triangulated files. The solver is developed on top of NREL's open-source performance portable library, AMReX, providing parallel execution capabilities on current and upcoming high-performance-computing (HPC) architectures. Simulations at the scale of several millions to billion particles have been performed using this software on large scale computing resources. This software can be applied to non-reacting solids dominant flows in silos, hoppers and screw conveyors as well as in high temperature reacting systems such as screw kilns and auger reactors.

Sitaraman, Hariswaran↗

Code for Experiment in Publication “Sensitivity Analysis in the Presence of Intrinsic Stochasticity for Discrete Fracture Network Simulations”

Following the Open Research requirements for AGU journals, we must release the code used to perform the experiment described in our recent publication, posted at (https://arxiv.org/abs/2312.04722). This code fits a joint emulator to data from a Discrete Fracture Network (DFN) simulation, performed using the open-source software DFNworks (https://dfnworks.lanl.gov/). All code to be released implements existing methods; there are no novel algorithms nor any major innovations to existing software.

Murph, Alexander↗

Revisiting the Hail Radar Reflectivity–Kinetic Energy Flux Relation by Combining T-Matrix and Discrete Dipole Approximation Calculations to Size Distribution Observations

The retrieval of hail kinetic energy with weather radars or its simulation in numerical models is challenging because of the shape complexity and variable density of hailstones. We combine 3D scans of individual hailstones with measurements of the particle size distributions (PSD) and T-matrix calculations to understand how hail reflectivity Z changes when approximating hailstones as spheroids, as compared to the realistic shapes obtained by 3D scanning technology. Additionally, recent terminal velocity relations are used to compare Z to the hail kinetic energy flux E ˙ . We parameterize the hail backscattering cross sections at L, S, C, and X bands as a function of size between 0.5 and 5.0 cm, matching the range of the observed PSDs. The scattering calculations use the T-matrix method for size parameters below 1.0 and the discrete dipole approximation (DDA) method otherwise. The DDA calculations are done for 48 digital models of realistic hailstones of sizes between 1 and 5 cm. The DDA cross sections are calculated for multiple orientations and averaged assuming a fully random orientation distribution to provide a single value per hailstone. The T-matrix reflectivity assuming solid ice spheres presents negligible differences to DDA results for size parameters below 1.0. Therefore, T matrix was used to fill in the gaps left by the DDA calculations. The results are mapped to the same size bins of the observed PSDs, allowing the calculation of the radar reflectivity. This is then correlated to E ˙ , allowing a potential improvement of past retrieval methods of E ˙ from Z in multiple wavelengths.

54 ENVIRONMENTAL SCIENCES↗

End-to-end GPU acceleration of low-order-refined preconditioning for high-order finite element discretizations

In this article, we present algorithms and implementations for the end-to-end GPU acceleration of matrix-free low-order-refined preconditioning of high-order finite element problems. The methods described here allow for the construction of effective preconditioners for high-order problems with optimal memory usage and computational complexity. The preconditioners are based on the construction of a spectrally equivalent low-order discretization on a refined mesh, which is then amenable to, for example, algebraic multigrid preconditioning. The constants of equivalence are independent of mesh size and polynomial degree. For vector finite element problems in H(curl) and H(div) (e.g., for electromagnetic or radiation diffusion problems), a specially constructed interpolation–histopolation basis is used to ensure fast convergence. Detailed performance studies are carried out to analyze the efficiency of the GPU algorithms. The kernel throughput of each of the main algorithmic components is measured, and the strong and weak parallel scalability of the methods is demonstrated. The different relative weighting and significance of the algorithmic components on GPUs and CPUs is discussed. Results on problems involving adaptively refined nonconforming meshes are shown, and the use of the preconditioners on a large-scale magnetic diffusion problem using all spaces of the finite element de Rham complex is illustrated.

97 MATHEMATICS AND COMPUTING↗

High-dimensional discrete Fourier transform gates with a quantum frequency processor

The discrete Fourier transform (DFT) is of fundamental interest in photonic quantum information, yet the ability to scale it to high dimensions depends heavily on the physical encoding, with practical recipes lacking in emerging platforms such as frequency bins. In this article, we show that d -point frequency-bin DFTs can be realized with a fixed three-component quantum frequency processor (QFP), simply by adding to the electro-optic modulation signals one radio-frequency harmonic per each incremental increase in d . We verify gate fidelity F W > 0.9997 and success probability P W > 0.965 up to d = 10 in numerical simulations, and experimentally implement the solution for d = 3, utilizing measurements with parallel DFTs to quantify entanglement and perform tomography of multiple two-photon frequency-bin states. Our results furnish new opportunities for high-dimensional frequency-bin protocols in quantum communications and networking.

97 MATHEMATICS AND COMPUTING↗

Perspectives on future research directions in green manufacturing for discrete products

With the increasing concern due to climate change caused by a higher atmospheric concentration of CO 2 and other greenhouse gases, reducing environmental impact is becoming more important for every part of society. Manufacturing is responsible for a significant amount of energy/material consumption and environmental burden and, therefore, has a great opportunity to reduce its impact through green manufacturing. Green manufacturing presents opportunities across the manufacturing enterprise to increase the efficient usage of energy and material resources. These opportunities include designing products to consume fewer materials and energy during manufacturing and use, incorporating more efficient manufacturing processes, streamlining and optimizing manufacturing schedules and plans, and circularizing products. The goal of this paper will be to provide a perspective from the authors on the opportunities that exist within green manufacturing for discrete products through a review of pertinent topics and future directions. The paper will focus on processes, manufacturing equipment, manufacturing systems, recovering value at a product’s end-of-life, and additional thoughts that include metrics and indicators, techno-economic assessment, and a discussion of efficiency and effectiveness. Key findings from this review include a need for social indicators and renewable energy considerations in scheduling and process planning, integrating Industry 4.0 into circular economy along with social and institutional dimensions, consistency in the ability to measure and conceptualize metrics and indicators, a detailed evaluation of the life cycle impacts and cost of Addit Manuf, and more human and environment-oriented considerations for smart manufacturing.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

¬¬Integration of Quantification of Margins and Uncertainties Methodology into Parallel Discrete Event Simulator Framework

Parallel Discrete Events Simulation (PDES) is becoming increasingly important to lab efforts in security and intelligence. It is used to model complex asynchronous systems such as computer networks, satellite systems, vehicular traffic, and human performance. Uncertainty Quantification (UQ) techniques have become a mainstay of Verification and Validation (V&V) efforts on physics simulations. However, PDES models are very different from traditional physics simulations, and research into UQ techniques for PDES is in its infancy. It is not clear which traditional UQ techniques can be applied to PDES, or what new techniques will need to be developed. The goal of this project was to identify existing UQ techniques that can be applied to PDES, and to develop new techniques as necessary. The project implemented or developed techniques to handle issues that do not appear in traditional physics simulations, but are common among PDES, including sampling techniques for high-dimensional homogenous inputs, response surfaces for high-variance heteroskedastic output, and characterization of skewed output distributions. These are foundational UQ techniques that must be used in any complete UQ analysis (Tong 2018).

97 MATHEMATICS AND COMPUTING↗

Source Discretization Near Curvilinear Mesh Refinements in One Dimeions (Summer Internship Final Report)

Lawrence Livermore National Lab developed the seismic wave code SW4 for earthquake simulations, and has recently added the ability to specify mesh-refinement interfaces in the curvilinear mesh. The primary purpose of this is to allow for high resolution near the surface, with relatively fewer total points in the mesh leading to shorter computation time. Presently, the code does not allow for point-source forcing terms (commonly used in seismic simulations) to be located near these curvilinear mesh refinement interfaces. The goal of this internship was to investigate the discretization of point-source forcing terms in the seismic wave equation when the sources are located near the interfaces between two curvilinear meshes. Ultimately this will be incorporated into SW4 to allow for more realistic simulations to be carried out in this faster implementation.

97 MATHEMATICS AND COMPUTING↗

Discrete Element Method Analysis for Metal Powders Used in Additive Manufacturing, and DEM Simulation Tutorial Using LIGGGHTS-PUBLIC [PowerPoint and paper]

Discrete Element Method (DEM) is a method of analysis to evaluate the dynamic interactions between granular particles. This method has been used in the pharmaceutical industry to improve the powder compaction process for tablet manufacturing. There are also applications in agriculture, food industry, and manufacturing. Direct energy deposition is an additive manufacturing technique which uses metallic powders fed through a nozzle, melted using a directed laser, and transformed into a solid object layer by layer. One way of feeding metal particles into the system involves the use of a vibrating hopper. Given a specified amplitude and frequency input, the hopper will enable the powder to travel up a path, and inject through the system with assistance from a stream of gas. The mechanical properties of a printed object can vary, depending on the characteristics of the powder flow and the particles’ as-received properties. Improved understanding of dynamic interactions of flowing powders could enable additive manufacturing components with 2D or 3D variations in mechanical properties, e.g., density. This work uses DEM simulation software to investigate the effects of particle cohesion, friction, and density on the quality of the flow by performing an angle of repose simulation, which is often used as a metric to evaluate the flowability of powders.

36 MATERIALS SCIENCE↗

Understanding Discrete Fracture Networks Through Spectral Graph Theory

Discrete Fracture Network models (DFNs) are used to simulate fluid flow and particle transport through fracture networks in low permeability rock. Understanding these processes are essential in many subsurface applications, such as environmental restoration of contaminated fractured media, CO 2 sequestration, detection of low-level nuclear tests, and hydrocarbon extraction. Compared with other models, DFNs allow for incorporation of a wider range of network characteristics but have substantially greater computation cost. These networks can be represented with graphs, allowing the use of graph theory tools to study the networks. I used Python to simulate flow and transport on a range of DFNs and analyzed these networks using methods from network analysis and spectral graph theory. My purpose was to find ways to gain insight about flow and transport on DFNs using these graph representations, bypassing the computationally intensive meshing typically required. My work is still in progress, but I have discovered several interesting trends and patterns that I believe could be useful towards my goal. If I am able to bring these results to fruition, they will aid subsurface geologists in extracting flow and transport information about fracture networks more efficiently.

54 ENVIRONMENTAL SCIENCES↗

Discrete-event Simulation Process Model for the Pyrochemical Processing of Plutonium at Los Alamos National Laboratory

The pyrochemical metal production operations that occur in the Plutonium Facility at Los Alamos National Laboratory perform plutonium purification with the aim to provide plutonium metal for a variety of defense- and non-defense missions within the National Nuclear Security Administration. The demands and constraints associated with the pyrochemical processing of plutonium are complex, making decision analyses challenging for program managers who require plutonium production for their mission applications. The construction of a discrete-event simulation process model is proposed to measure and report the process capacity, material throughput, equipment requirements, and dose accumulation for operators of the pyrochemical metal production operations. The process model, constructed in the ExtendSim™ software, will represent the cause-and-effect relationships between the pyrochemical processing environment and the process constraints, including criticality limitations, material control and accountability measures, chemical analysis requirements, and equipment availability. An accurate representation of the pyrochemical metal production process capacity through simulation modeling will be helpful to program managers in their efforts to forecast plutonium availability for mission applications. Furthermore, the proposed process model will be vital for future analyses that will measure the interactions between the pyrochemical metal production operations and the aqueous reprocessing operations and their ability to minimize transuranic waste disposal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Superior discretizations and AMG solvers for extremely anisotropic diffusion via hyperbolic operators [Slides]

Diffusion in magnetic confinement fusion is extremely anisotropic in the direction of field lines. Rewrote diffusion system based on directional gradients, apply discretization and solver techniques developed for advection. Orders of magnitude decrease in error and solve wallclock time vs. traditional methods. The next steps include: (1) incorporate into larger MHD simulations, (2) better solvers for closed field lines or mixed regimes, and (3) possibly other extremely anisotropic equations.

97 MATHEMATICS AND COMPUTING↗

Parallel-in-Time Methods for Method-of-Lines Discretizations of Nonlinear Hyperbolic PDEs and Systems (Final Report)

The work for the subcontract is situated in the area of parallel-in-time integration for hyperbolic partial differential equations (PDEs). Parallel-in-time integration is an active area of research due to its ability to enable faster numerical simulations for applications throughout many areas of science. The work in this subcontract builds on a variety of results that were obtained, as part of the work performed for Subcontract No. B648355, for the Multigrid Reduction-in-Time (MGRIT) method from [1] applied to hyperbolic PDEs. This subcontract extends these results further to more efficient methods and to the case of method-of-lines discretizations for nonlinear hyperbolic PDES and systems of PDEs. The following is a summary of the research performed and results achieved during milestone periods 1, 2 and 3 by the PI (Hans De Sterck) and Postdoctoral Research Associate (Oliver Krzysik), for required tasks 1-4 (as listed in the Statement of Work): Research over the previous year has been split into three main projects: (i) solution of acoustic equation system; (ii) solution of nonlinear scalar hyperbolic PDEs; (iii) solution of nonlinear hyperbolic systems of PDEs.

97 MATHEMATICS AND COMPUTING↗