Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diode effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Non-planar growth of high Al-mole-fraction AlGaN on patterned GaN platforms for mitigating strain-induced cracks beyond the critical layer thickness

Non-planar growth of Al x Ga 1-x N epitaxial layers with an average alloy composition up to Al-mole-fraction of x ~ 0.21 was performed on patterned c-plane GaN on (0001) sapphire substrates with stripe-shaped mesa structures. This approach successfully realized the growth of crack-free AlGaN layers on the top of mesas with layer thicknesses greater than the expected critical layer thickness by relaxing the in-plane stress on the top of the mesa. The effectiveness of the relaxation strongly depends on the width and depth of the stripe mesa. In conclusion, the relaxation of in-plane stress and resultant suppression of cracks in AlGaN layer are qualitatively discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

H 2 O absorption spectroscopy via focused laser differential interferometry

A modification of focused laser differential interferometry (FLDI) is demonstrated with an infrared tunable diode laser (TDL) to achieve simultaneous absorption spectroscopy (AS) measurements. Measurements from this absorbing-FLDI (A-FLDI) are shown for a Hencken burner plume. Initial comparison measurements are recorded using TDLAS and an electrical hygrometer. Raw voltage and estimated absorbance measurements illustrate that the technique detects five distinct absorbance peaks of the methane–air flame while retaining the expected behavior of typical FLDI. This modification furthers efforts to enable FLDI to conduct analysis of the pressures, temperatures, and molecular densities of flows. It also explores the potential for reducing path-integration (PI) effects in absorption spectroscopy and potentially enabling spatially and temporally resolved local flow measurements. Reductions in PI length as high as 82%–84% are observed.

Holladay, Seth (ORCID:0009000650875421)↗
DOE OSTI2025

Precision Timing in CMS at the HL-LHC: Current Progress on Validation and Production

During the High Luminosity phase of LHC, up to 200 proton-proton collisions per bunch crossing will bring severe challenges for event reconstruction. To mitigate pileup effects, an extended upgrade program of the CMS experiment is expected. Among which, a new timing layer, the MIP Timing Detector (MTD), will be integrated between the tracker and the calorimeters. With a time resolution of 30-60 ps, the MTD will enable 4D vertexing, bringing significant improvements in track-to-vertex association and object identification. The MTD is composed of two subsystems based on different technologies: the Barrel Timing Layer (BTL) consists of LYSO:Ce scintillating crystals readout by SiPMs, and the Endcap Timing Layer (ETL) is made of Low-Gain Avalanche Diodes. The BTL is currently under production, while ETL sensor prototyping and validation are ongoing. Recent system tests have confirmed the performance of the full acquisition chain. This talk will provide an overview of the MTD design, along with the physics motivation, and the current status of BTL construction and ETL development.

Safdari, Murtaza [Fermilab] (ORCID:000000018323731↗
DOE OSTI2022

Microgap breakdown with floating metal rod perturbations

Here, we report the characterization of microgap breakdown with perturbations from a metal rod floating between anode and cathode electrodes. The effects of the metal rod on the electric field distribution and the field enhancement factor are evaluated by numerical simulation and the conformal mapping method, and they indicate that the field emission regime is not reached. The breakdown voltages in the Townsend discharge regime are determined based on the voltage–current characteristics, which are obtained from two-dimensional fluid simulations. It is found that the breakdown characteristics can be significantly modulated by the floating metal rod, and the breakdown curve (breakdown voltage vs the net gap distance) is no longer U-shaped, which deviates from the conventional Paschen's law. The underlying physical mechanisms are related to the electric field enhancement, curved breakdown path, and nonuniform ion flux caused by the electric shielding effect. The results provide insights into breakdown characteristics in microscale discharges, which may promote conventional investigation of simplified clean gaps toward more complex conditions (e.g., with floating microparticles) in miniaturized plasma devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Multichannel Fiber-Optic Silicon Fabry–Pérot Interferometric Bolometer System for Plasma Radiation Measurements

A single-channel fiber-optic bolometer system based on a high-finesse silicon Fabry–Pérot interferometer (FPI) was previously reported, intended to measure plasma radiation from the magnetically confined fusion chamber. Recently, we developed a multichannel fiber-optic bolometer system with five bolometers multiplexed using a coarse wavelength division multiplexer (CWDM) and interrogated with a white-light system involving a superluminescent light-emission diode source and a high-speed spectrometer. One of the bolometers was used as the reference bolometer to compensate for the ambient temperature variations, and the other four bolometers were used for radiation measurement. The bolometers have a simple structure with a silicon pillar at the end of the single-mode fiber and a gold disk on the other side of the silicon pillar. They are also easy to fabricate without stringent requirements on the optical alignment. Analysis of the system optimization was performed to improve the noise performance and to mitigate the vibration effect that may present in the practical application. The system had a significantly enhanced measurement range compared to the previous high-finesse FPI bolometer system for measuring radiation. Test results performed in air using a 405 nm laser as the radiation source showed that the temperature resolution and the noise-equivalent power density of the sensing bolometers connected to each channel of the CWDM were, respectively, ~0.4 mK and ~0.1 W/m2, with a time constant of ~220 ms, which is comparable to the previous more complicated fiber-optic bolometer systems based on high-finesse FPIs that were interrogated using wavelength-scanning lasers.

Uddin, Nezam↗
DOE OSTI2023

Injection mechanisms in a III -nitride light-emitting diode as seen by self-emissive electron microscopy

Here, we report on the investigation of an electrically biased high efficiency green III-nitride light-emitting diode (LED) by electron emission microscopy (EEM) using a low-energy electron microscope (LEEM). The surface of the LED was activated to negative electron affinity via deposition of a submonolayer of Cs. With the illumination column of the LEEM turned off, upon electrical injection of the LED, we directly image the hot electrons generated by eeh Auger-Meitner nonradiative processes that diffuse through the top p-Ga N layer and emit out the surface of the biased LED. By determining the source of emitted electrons using complementary electron emission spectroscopy measurements, EEM allows us to effectively map the carrier density within the LED. Using EEM, we observed nonelectron emitting regions with a density of approximately 3 × 10 8 cm -2 , identified as V-shaped defects (V-defects). This is confirmed through the corresponding dark spots of panchromatic cathodoluminescence measurements of the same sample and by plan-view transmission electron microscopy. The absence of electron emission at the sidewall of the V-defects can be attributed to several factors, including reduced carrier density in the sidewall quantum wells due to carriers traveling fast through the semipolar sidewalls before being injected into the planar quantum wells, the reduced population of hot electrons surviving diffusion through the thicker p-GaN filling in the V-defect before emission onto vacuum, and a smaller Auger-Meitner coefficient for the low In content semipolar sidewall quantum wells. The stronger electron emission observed at the ridges of most V-defects compared to the planar quantum well regions indicates larger local injected carrier densities, confirming that V-defect sidewalls allow for strong lateral carrier injection when compared to the weaker vertical injection away from the V-defect as evidenced by the weaker electron emission intensity away from the V-defects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Manufacturable Corrugated Substrates for High Efficiency Organic Light-Emitting Diodes (OLEDs)

In this project, we start with optical simulation of an OLED to have a basic understanding of the mode dispersion inside the device. We first fabricated 1-D photonic crystals’ (PhCs) for corrugated green OLED devices observed enhanced EQE from 20% to 27%, which has the drawbacks of angular color shift. To resolve this issue, we fabricated poly crystalline PhCs (poly PhC) devices and observed alleviated angular color shift. The outcoupling efficiency is enhanced from 30% to 35%, which can be further enhanced to 60% by extracting the substrate mode. To further enhance the efficiency, we used RCWA (rigorous coupled-wave analysis) simulation to study the optical property in the corrugated device. We found out the corrugation reduces the reflectance of the Al cathode, lowers the cavity resonance and weakens the cavity emission. To preserve the cavity effect, we insert a low index Teflon layer (n = 1.3) between the ITO anode and the corrugated substrate, which increased the index contrast and hence the reflectance of the bottom electrode. As a result, the corrugated OLED with a Teflon layer shows a maximum outcoupling efficiency of 75%.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Dopant Sensitive Electrolytic Etching of Germanium with High Selectivity

Abstract The enhanced charge carrier mobility and photon absorption compared to silicon make germanium attractive for next-generation photo diodes. However, the complex oxidation behavior of germanium challenges dopant-dependent selective etching that is desired for the fabrication of backside imaging architectures. This report demonstrates electrolytic wet etching of p-doped germanium which proceeds up to 17,500x faster than etching of intrinsic germanium. Homoepitaxially grown layers of germanium were electrolytically etched in potassium hydroxide over a range of biases. Intermittent acquisition of cyclic voltammetry spectra during etching has suppressed the formation of electric double layers, maintained appreciable etch rates, and allowed for in operando process control. The observed etch rates scaled with dopant concentration. An effective etch rate of germanium removal of 2.100±0.044 µm/min was accomplished for a boron dopant concentration of 6E18cm-3. For nominally intrinsic germanium, however, an effective etch rate of only 0.00012±0.00011 µm/min was observed. A series of systematic electrolytic etch experiments have revealed the transfer of 4 electrons per germanium atom removed.

Wood, Joseph G.↗
DOE OSTI2020

Aging Effect Analysis of PV Inverter Semiconductors for Ancillary Services Support

PV inverters can provide reactive power while generating active power. An ongoing microgrid implementation at Duke Energy actively engages non-utility PVs to generate/absorb reactive power in support of ancillary services to increase microgrid resiliency during extreme events. PV systems are requested to provide reactive power support: 1) in response to grid voltage variation to better regulate the local voltage; or 2) in response to utility incentives, such as following Transactive Energy System (TES) incentives. However, providing ancillary services might shorten the lifetime expectation of PV inverter semiconductors. This paper summarizes the potential impacts on a PV inverter semiconductor's lifetime when providing ancillary services. The analysis presented in this research work shows that providing reactive power support will increase the mean junction temperature and the junction temperature variation of the inverter diodes. This increased junction temperature will eventually lead to shorter diode lifetime. The lifetime estimation of semiconductors is briefly reviewed. The power losses of PV inverter semiconductors are derived as a support analysis to the junction temperature calculation. In addition, the impact of the filtering inductor on the semiconductor current distribution is discussed. The theoretical analysis presented in this research work is supported by simulation results.

14 SOLAR ENERGY↗
DOE OSTI2023

Wide-range continuous tuning of the thermal conductivity of La0.5Sr0.5CoO3-δ films via room-temperature ion-gel gating

Abstract Solid-state control of the thermal conductivity of materials is of exceptional interest for novel devices such as thermal diodes and switches. Here, we demonstrate the ability to continuously tune the thermal conductivity of nanoscale films of La 0.5 Sr 0.5 CoO 3- δ (LSCO) by a factor of over 5, via a room-temperature electrolyte-gate-induced non-volatile topotactic phase transformation from perovskite (with δ ≈ 0.1) to an oxygen-vacancy-ordered brownmillerite phase (with δ = 0.5), accompanied by a metal-insulator transition. Combining time-domain thermoreflectance and electronic transport measurements, model analyses based on molecular dynamics and Boltzmann transport equation, and structural characterization by X-ray diffraction, we uncover and deconvolve the effects of these transitions on heat carriers, including electrons and lattice vibrations. The wide-range continuous tunability of LSCO thermal conductivity enabled by low-voltage (below 4 V) room-temperature electrolyte gating opens the door to non-volatile dynamic control of thermal transport in perovskite-based functional materials, for thermal regulation and management in device applications.

42 ENGINEERING↗
DOE OSTI2024

A system identification approach for non-intrusive reduced order modeling of radiation-induced photocurrents

In this study, development of compact photocurrent models is currently dominated by analytical techniques that rely on physical assumptions to render the governing equations solvable in a closed form. Violation of these assumptions can reduce the accuracy of the models and/or limit their scope. In this paper we show that system identification of nonlinear state-space systems can serve as an alternative numerical basis for non-intrusive reduced order modeling of photocurrent effects. To that end we develop a compact gray box photocurrent model (GBPM) by using a state-space representation with a low-dimensional latent state equation that mimics a mathematical model for the response of an idealized class of devices to ionizing radiation. In so doing we obtain a model that learns the dynamics of a quantity of interest directly from its measurements without requiring snapshots of the internal device state or its discretized model, and can be inferred from very small data sets. To demonstrate the approach we train the GBPM using a small experimental data set for a Z5236 Zener diode and a small synthetic data set obtained by simulating a synthetic pn-junction device. We then compare the GBPMs with black box models trained on the same data and show that performance of the latter is limited by the size of the data set, while the former are able to achieve excellent performance in both the reproductive and the predictive regimes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Probing the Fine Symmetry Breaking in High-Temperature Superconductor Bi 2 Sr 2 CaCu 2 O 8+δ with Angle-Resolved Nonreciprocal Transport

After decades of research, symmetry breaking in high-temperature cuprate superconductors remains a key issue to resolve and is relevant to understanding their exotic quantum phases. In the prototypical cuprate superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212), the possible symmetry breaking has been mostly examined microscopically with scanning tunneling microscopy and photoemission spectroscopy. However, macroscopic evidence and the direct implications for electronic transport have remained elusive. Using superconductivity-enhanced nonreciprocal transport, we report macroscopic evidence of inversion symmetry breaking in Bi2212. While the inversion symmetry breaking is subtle, its effect on nonreciprocal transport is significantly enhanced by the vortex motion during the superconducting transition, leading to a robust manifestation of inversion symmetry breaking in macroscopic transport. Combining angle-resolved nonreciprocal transport and 3D tight-binding model calculations, we derive that the inversion symmetry breaking is due to subtle crystal distortions that give rise to both in-plane and out-of-plane polar axes. Our work not only establishes nonreciprocal transport as a sensitive macroscopic probe to provide electrical transport-based evidence of fine symmetry breaking in Bi2212, but also paves the way for novel device applications such as high-temperature superconducting diodes and superconducting spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

NIR fluorescence lifetime macroscopic imaging with a novel time-gated SPAD camera

SwissSPAD3 is the latest of a family of widefield time-gated SPAD imagers developed for fluorescence lifetime imaging (FLI) applications. Its distinctive features are (i) the ability to define shorter gates than its predecessors (width W < 1 ns), (ii) support for laser repetition rates up to at least 80 MHz and (iii) a dual-gate architecture providing an effective duty cycle of 100%. We present widefield macroscopic FLI measurements of short lifetime NIR dyes, analyzed using the phasor approach. Furthermore, the results are compared with those previously obtained with SwissSPAD2 and to theoretical predictions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Intersubband transitions in nonpolar and semipolar III-nitrides: Materials, devices, and applications

In the last two decades, the third-generation wide bandgap semiconductor III-nitrides have revolutionized a myriad of electronic and photonic devices and applications, including power electronics, extreme-environment electronics, RF amplifiers, and optoelectronics such as light-emitting diodes and laser diodes. Recently, III-nitride heterostructures (e.g., AlGaN/GaN) based intersubband transition (ISBT) has garnered considerable research interest for infrared (IR), terahertz (THz), and ultrafast optoelectronics (e.g., photodetectors and quantum cascade lasers) due to its large conduction band offset, large optical phonon energy, and promising room-temperature operation. This paper presents a comprehensive review on the recent progress and challenges of III-nitrides based ISBT from the perspectives of materials, structures, devices, and applications, with a focus on nonpolar and semipolar III-nitrides. Various device structures have been demonstrated for III-nitrides based ISBT, including quantum wells, dots, and wires, among which AlGaN/GaN quantum wells are the most widely used. The effects of device parameters, crystal orientations, and doping on the ISBT properties of AlGaN/GaN quantum wells are discussed. Although the room-temperature operation is still elusive, theoretical and experimental studies show that nonpolar and semipolar III-nitrides based ISBT exhibits tunable ISBT wavelength from far-IR to THz spectral range with higher efficiency compared with polar c-plane ISBT. This review can serve as a gateway to and an important reference for the recent progress and challenges of III-nitrides based ISBT and its potential applications in sensing, communication, ultrafast optoelectronics, and integrated photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Understanding the Effects of Inhomogeneities at the Back Interface of CdTe‐Based Solar Cells Using 2D Modeling

One-dimensional modeling cannot capture lateral inhomogeneities in CdTe-based devices. Here, we use 2D modeling to investigate the role of varying energetics at the back interface. We consider improvements in the back interface layer (BIL) through either reducing back surface recombination velocity (BSRV) or decreasing the downward band bending near the back interface. We show that when the BSRV is reduced, but strong downward band bending remains, there is no change in the device performance until the BSRV of 90% of the back interface is improved by the BIL. On the other hand, any coverage with a BIL that improves band bending results in device improvements. We use band bending, back interface recombination current densities, and voltage dependent current flow through the device to understand these improvements. The modeling shows that lateral flow of carriers greatly affects device performance, which is not captured in parallel diode modeling, and demonstrates improved understanding with 2D modeling.

2D modelling↗
DOE OSTI2021

3D Printing of Transparent Silicone Elastomers

Here in this paper, inks for transparent elastomers that are formulated by matching the refractive index of silica and polysiloxanes are described. The transparent inks transmit up to ≈90% of 700 nm light through 1 cm and remain transparent when solidified. The inks and solidified materials exhibit a thermochromic effect. This thermochromic effect can be controlled by the refractive index mismatch. Transparency may increase or decrease as temperature increases, depending on the refractive index mismatch of the base polysiloxane and silica. It is found that the rheological properties of the ink depend on the distribution of silica particles, which is dictated by silica functionality, weight content, and processing. Siloxane precursors that vary in chemical functionality are introduced to tailor the mechanical properties of the printed elastomers, which obtain stretchability >65% along with a tensile modulus of 1.9 MPa. After optimizing siloxane chemistry and ink processing, the authors are able to print transparent elastomers. Potential applications are demonstrated for printed structures by printing encapsulation structures for light-emitting diodes, semitransparent dye-filled structures, a microfluidic mixing device, and a multimaterial structure that exhibits temperature-dependent camouflage.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of symmetry breaking and spin-orbit coupling on the band gap of halide perovskites

Halide perovskite (HP) materials have recently emerged as a class of semiconductors with immense promise for various optoelectronic applications, ranging from solar cells to light-emitting diodes. One of the unique attributes of HPs is their tunable band gaps with different factors governing their value. Furthermore, the first factor is related to relativistic corrections [“mass-Darwin,” connected to the ns 2 lone pairs, and spin-orbit coupling (SOC)] that induce an orbital shift or degeneracy splitting, resulting in a band-gap reduction. The second factor involves the structural configuration: in HPs the local symmetry of each Wyckoff position tends to be broken, inducing an opening of the band gap. Based on high-throughput density functional theory calculations, this paper systematically studies a possible self-cancelation on the band-gap correction for HPs when the polymorphous configuration—structural effects—and the SOC—electronic effects—are included. Our results indicate that the nature of interplay between SOC and symmetry breaking (SB) is that they are independent decoupling effects to describe the band-gap magnitude in halide perovskites. As a result of that, we observe a transitivity of the band-gap description; i.e., if we know the band gap of halide perovskites without SB and SOC, we can independently add the effects of band-gap reduction due to SOC and band-gap opening due to SB, regardless of the order in which these effects are considered.

14 SOLAR ENERGY↗
DOE OSTI2020

14 MeV DT Neutron Test Facility at the Sandia Ion Beam Laboratory

A recently completed LDRD project has provided a new facility at Sandia for testing effects of energetic neutrons on electronic components. 14 MeV neutrons are produced with a deuterium ion beam onto a thin-film tritide target. The goal of the project was to increase the neutron fluence to levels needed for radiation effects testing and qualification. This goal was achieved through two technical advances. First, a new multi-layer target concept was developed to reduce the rate of tritium loss from the target by isotope exchange, thereby reducing tritium usage and increasing target lifetime. The second advance was the construction of a new test chamber designed to maximize neutron flux at test locations. Together, these increased the available neutron fluence by several orders of magnitude. This new capability is being used in tests for Sandia nuclear weapon programs, evaluation of commercial parts such as highly-scaled CMOS SRAM lCs, and tests of new devices under development at Sandia such as lll-V HBTs, gallium nitride high-voltage diodes, and for fundamental studies of physical mechanisms of device failure.

36 MATERIALS SCIENCE↗