Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Diffusion length measurements of thin GaAs solar cells by means of energetic electrons

A calculation of the short circuit current density (j sub sc) of a thin GaAs solar cell induced by fast electrons is presented. It is shown that in spite of the disparity in thickness between the N-type portion of the junction and the P-type portion of the junction, the measurement of the bulk diffusion length L sub p of the N-type part of the junction is seriously hampered due to the presence of a sizable contribution to the j sub sc from the P-type region of the junction. Corrections of up to 50% had to be made in order to interpret the data correctly. Since these corrections were not amenable to direct measurements it is concluded that the electron beam method for the determination of the bulk minority carrier diffusion length, which works so well for Si solar cells, is a poor method when applied to thin GaAs cells.

Vonross, O.↗
NASA NTRS1995

Formation of a very thin current sheet in the near-earth magnetotail and the explosive growth phase of substorms

A magnetofricional method is used to construct two-dimensional MHD equilibria of the Earth's magnetosphere for a given distribution of entropy functions(S = pV(exp gamma), where p is the plasma pressure and V is the tube volume per unit magnetic flux. It is found that a very thin current sheet with B (sub zeta) is less than 0.5 nu T and thickness less than 1000 km can be formed in the near-earth magnetotail (x is approximately -8 to -20R(sub e) during the growth phase of substorm. The tail current sheets are found to become thinner as the entropy or the entropy gradient increases. It is suggested that the new entropy anti-diffusion instability associated with plasma transport across field lines leads to magnetic field dipolarization and accelerates the formation of thin current sheet, which may explain the observed explosive growth phase of substorms.

Lee, L. C.↗
NASA NTRS1986

Astrophysical data on 5 eV to 1 keV radiation from the radiative decay of fundamental particles - Current limits and prospects for improvement

Line emission from the decay of fundamental particles, integrated over cosmological distances, can give rise to detectable spectral features in the diffuse astronomical background between 5 eV and 1 keV. Spectroscopic observations may allow these features to be separated from line emission from the numerous local sources of radiation. The current observational status and existing evidence for such features are reviewed. No definitive detections of nongalactic line features have been made. Several local sources of background mask the features at many wavelengths and confuse the interpretation of the data. No systematic spectral observations have been carried out to date. Upcoming experiments which can be expected to provide significantly better constraints on the presence of spectral features in the diffuse background from 5 eV to 1 keV are reviewed.

Bowyer, Stuart↗
NASA NTRS1976

Analysis of epitaxial drift field N on P silicon solar cells

The performance of epitaxial drift field silicon solar cell structures having a variety of impurity profiles was calculated. These structures consist of a uniformly doped P-type substrate layer, and a P-type epitaxial drift field layer with a variety of field strengths. Several N-layer structures were modeled. A four layer solar cell model was used to calculate efficiency, open circuit voltage and short circuit current. The effect on performance of layer thickness, doping level, and diffusion length was determined. The results show that peak initial efficiency of 18.1% occurs for a drift field thickness of about 30 micron with the doping rising from 10 to the 17th power atoms/cu cm at the edge of the depletion region to 10 to the 18th power atoms/cu cm in the substrate. Stronger drift fields (narrow field regions) allowed very high performance (17% efficiency) even after irradiation to 3x10 to the 14th power 1 MeV electrons/sq cm.

Baraona, C. R.↗
NASA NTRS1980

Theory of the low-latitude boundary layer

A one-dimensional steady state fluid mechanical model is developed of the low-latitude plasma boundary layer inside the dawn and dusk magnetopause. Momentum transfer in the layer is produced by viscosity and/or mass diffusion. Coupling to the ionosphere is achieved via field-aligned currents, the magnitude of which is limited by parallel potential drops. These currents flow into and out of the ionosphere in the manner described by Iijima and Potemra. The higher-latitude (region 1) currents are associated with the boundary layer proper, while the lower-latitude (region 2) ones are associated with a region of sunward return flow adjacent to the boundary layer. The parallel potential drops have a magnitude of typically 2-3 kV and a north-south extent of 100-200 km. The calculated potential profile corresponds reasonably well to observed inverted V precipitation events.

Sonnerup, B. U. OE.↗
NASA NTRS1984

Application of near-term technology to a Mach 2.0 variable-sweep-wing, supersonic-cruise executive jet

The impact of variable sweep wing technology with relaxed static stability requirements on a supersonic-cruise executive jet with transatlantic range was assessed. The baseline vehicle utilized modified, current-technology engines and titanium structures produced with superplastic forming and diffusion bonding; this vehicle meets study requirements for both supersonic-cruise and low-speed characteristics. The baseline concept has a ramp weight of 64,500 pounds with a crew of two and eight passengers. Its Mach 2.0 cruise range is nearly 3,500 nautical miles; its Mach 0.9 cruise range is over 5,000 nautical miles. Takeoff, landing, and balanced field length requirements were calculated for a composite variant and are all less than 5,000 feet.

Beissner, F. L., Jr.↗
NASA NTRS1987

Characterization and modelling of open tube diffused n+p bulk InP solar cells

The authors describe the photovoltaic characteristics of an n+p junction solar cell fabricated on bulk InP by an open-tube-diffusion technique. Analysis of the forward characteristics shows that the forward current is dominated by recombination in the quasineutral regions, indicating that the fabrication technique produces a clean junction. Spectral response measurements are analyzed and more realistic boundary conditions are used to model the solar cell to determine important material and device parameters.

Bothra, S.↗
NASA NTRS1990

Pulsed plasmoid electric propulsion

A method of electric propulsion is explored where plasmoids such as spheromaks and field reversed configurations (FRC) are formed and then allowed to expand down a diverging conducting shell. The plasmoids contain a toroidal electric current that provides both heating and a confining magnetic field. They are free to translate because there are no externally supplied magnetic fields that would restrict motion. Image currents in the diverging conducting shell keep the plasmoids from contacting the wall. Because these currents translate relative to the wall, losses due to magnetic flux diffusion into the wall are minimized. During the expansion of the plasma in the diverging cone, both the inductive and thermal plasma energy are converted to directed kinetic energy producing thrust. Specific impulses can be in the 4000 to 20000 sec range with thrusts from 0.1 to 1000 Newtons, depending on available power.

Bourque, Robert F.↗
NASA NTRS1994

The viability of photovoltaics on the Martian surface

The viability of photovoltaics (PV) on the Martian surface may be determined by their ability to withstand significant degradation in the Martian environment. Probably the greatest threat is posed by fine dust particles which are continually blown about the surface of the planet. In an effort to determine the extent of the threat, and to investigate some abatement strategies, a series of experiments were conducted in the Martian Surface Wind Tunnel (MARSWIT) at NASA Ames Research Center. The effects of dust composition, particle size, wind velocity, angle of attack, and protective coatings on the transmittance of light through PV coverglass were determined. Both initially clear and initially dusted samples were subjected both to clear winds and simulated dust storms in the MARSWIT. It was found that wind velocity, particle size, and angle of attack are important parameters affecting occlusion of PV surfaces, while dust composition and protective coatings were not. Neither induced turbulence nor direct current biasing up to 200 volts were effective abatement techniques. Abrasion diffused the light impinging on the PV cells, but did not reduce total coverglass transmittance by more than a few percent.

Gaier, James R.↗
NASA NTRS1994

High-resolution spectroscopy of Balmer-dominated shocks in the Large Magellanic Cloud

We present high-resolution spectra of the four Balmar-dominated supernova remnants (SNRs) in the Large Magellanic Cloud (LMC). These data allow us to measure the width of the narrow component of H alpha emission in the nonradiative filaments present in these SNRs. We find that the widths range from 30 to 50 km/s FWHM, similar to the only previously measured width of a nonradiative shock filament, that of about 30 km/s in the NE Cygnus Loop. The line widths do not appear to scale with shock velocity. These observations severely limit the possible broadening mechanisms. We discuss several possibilities, the most promising of which is a precursor associtated with cosmic rays. Assuming a cosmic-ray precursor, we are able to place constraints on the cosmic-ray diffusion coefficient. Observations such as these may provide the best method currently available to probe cosmic-ray acceleration in SNR shock waves.

Smith, R. Chris↗
NASA NTRS1996

Ignition and Combustion of Bulk Metals in a Microgravity Environment

This annual report summarizes the latest results obtained in a NASA-supported project to investigate the effect of gravity on the ignition and combustion of bulk metals. The experimental arrangement used for this purpose consists of a 1000-W xenon lamp that irradiates the top surface of cylindrical titanium and magnesium specimens, 4 mm in diameter and 4 mm in height, in a quiescent, pure-oxygen environment at 1 atm. Reduced gravity is obtained from the NASA LeRC DC-9 aircraft flying parabolic trajectories. Values of critical and ignition temperatures are obtained from thermocouple records. Qualitative observations and propagation rates are extracted from high-speed cinematography. Emission spectra of gas-phase reactions are obtained with an imaging spectrograph/diode array system. It was found that high applied heating rates and large internal conduction losses generate critical and ignition temperatures that are several hundred degrees above the values obtained from isothermal experiments. Because of high conduction and radiation heat losses, no appreciable effect on ignition temperatures with reduced convection in low gravity is detected. Lower propagation rates of the molten interface on titanium and of ignition waves on magnesium are obtained at reduced gravity. These rates are compared to theoretical results from heat conduction analyses with a diffusion/convection controlled reaction. The close agreement found between experimental and theoretical values indicates the importance of the influence of natural convection-enhanced oxygen transport on combustion rates. Lower oxygen flux and lack of oxide product removal in the absence of convective currents appear to be responsible for longer burning times of magnesium diffusion flames at reduced gravity. The accumulation of condensed oxide particles in the flame front at low gravity produces a previously unreported unsteady explosion phenomenon in bulk magnesium flames. This spherically symmetric explosion phenomenon seems to be driven by increased radiation heat transfer from the flame front to an evaporating metal core covered by a porous, flexible oxide coating. These important results have revealed the significant role of gravity on the burning of metals, and are now being used as the database for future experiments to be conducted with different metals at various pressures, oxygen concentrations and gravity levels.

Branch, M. C.↗
NASA NTRS1999

Non-Equilibrium Superconductivity and Magnetic Pair Breaking in Perovskite Half-Metallic Ferromagnet-Insulator-Superconductor (F-I-S) Heterostructures

The effect of spin-polarized quasiparticle currents on the critical current density (J-c) of cuprate superconductors is studied in perovskite F-I-S heterostructures as a function of insulator thickness and of underlying magnetic materials. A pulsed current technique is employed to minimize extraneous Joule heating on the superconductor. At temperatures near T-c, F-I-S samples with insulator thicknesses\1e2nm show precipitous decrease in J_c as current injection (I_m) is increased. In contrast, J_c in a controlled sample with a substituted non-magnetic material (N-I-S) exhibit no dependence on I_m. Similarly, a F-I-S sample with a 10 mn insulating barrier also show little J_c effect versus I_m. At low temperatures with I_m = 0, significant suppression of J-c is observed only in the thin barrier F-I-S samples, although T_c and the normal-state resistivity of all samples are comparable. These phenomena can be attributed to the Cooper pair breaking induced by externally-injected and internally-reflected spin-polarized quasiparticle currents. We estimate an order of magnitude range for the spin diffusion length of 100 nm to 100\ mum.

Fu, C.-C.↗
NASA NTRS1995

Studies on Methanol Crossover in Liquid-Feed Direct Methanol Pem Fuel Cells

The performance of liquid feed direct methanol fuel cells using various types of Nafion membranes as the solid polymer electrolyte have been studied. The rate of fuel crossover and electrical performance has been measured for cells with Nafion membranes of various thicknesses and equivalent weights. The crossover rate is found to decrease with increasing thickness and applied current. The dependence of crossover rate on current density can be understood in terms of a simple linear diffusion model which suggests that the crossover rate can be influenced by the electrode structure in addition to the membrane. The studies suggest that Nafion EW 1500 is a very promising alternate to Nafion EW 1100 for direct methanol fuel cells.

Methanol Pem Fuel↗
NASA NTRS1988

Carbon doping in molecular beam epitaxy of GaAs from a heated graphite filament

Carbon doping of GaAs grown by molecular beam epitaxy has been obtained for the first time by use of a heated graphite filament. Controlled carbon acceptor concentrations over the range of 10 to the 17th-10 to the 20th/cu cm were achieved by resistively heating a graphite filament with a direct current power supply. Capacitance-voltage, p/n junction and secondary-ion mass spectrometry measurements indicate that there is negligible diffusion of carbon during growth and with postgrowth rapid thermal annealing. Carbon was used for p-type doping in the base of Npn AlGaAs/GaAs heterojunction bipolar transistors. Current gains greater than 100 and near-ideal emitter heterojunctions were obtained in transistors with a carbon base doping of 1 x 10 to the 19th/cu cm. These preliminary results indicate that carbon doping from a solid graphite source may be an attractive substitute for beryllium, which is known to have a relatively high diffusion coefficient in GaAs.

Malik, R. J.↗
NASA NTRS1981

Determination of lifetimes and recombination currents in p-n junction solar cells, diodes, and transistors

New methods are presented and illustrated that enable the accurate determination of the diffusion length of minority carriers in the narrow regions of a solar cell or a diode. Other methods now available are inaccurate for the desired case in which the width of the region is less than the diffusion length. Once the diffusion length is determined by the new methods, this result can be combined with measured dark I-V characteristics and with small-signal admittance characteristics to enable determination of the recombination currents in each quasi-neutral region of the cell - for example, in the emitter, low-doped base, and high-doped base regions of the BSF (back-surface-field) cell. This approach leads to values for the effective surface recombination velocity of the high-low junction forming the back-surface field of BSF cells or the high-low emitter junction of HLE cells. These methods are also applicable for measuring the minority-carrier lifetime in thin epitaxial layers grown on substrates with opposite conductivity type.

Neugroschel, A.↗
NASA NTRS1978

Effects of particle drift on cosmic ray transport. II - Analytical solution to the modulation problem with no latitudinal diffusion

An analytical solution to a model of the modulation of galactic cosmic rays in the presence of particle drifts is presented and discussed. The solution assumes an energy-independent radial diffusion coefficient proportional to distance and no latitudinal diffusion, and includes energy-independent particle drift velocities similar to those expected in a Parker spiral magnetic field with an equatorial current sheet. The solutions clearly demonstrate the large effects of drifts on the modulated cosmic-ray intensity. For values of the radial diffusion coefficient and particle drift velocity which are plausible for 1-GV-rigidity protons, the logarithmic radial gradient in the inner solar system is reduced by more than a factor of 5 over the value calculated in the absence of drifts. It is found that even for much smaller values of particle drift velocity and radial diffusion coefficient, such as might be expected for protons with energies of the order of 10 MeV, the effects of the drifts can be substantial.

Isenberg, P. A.↗
NASA NTRS2017

CIMI Simulations with Newly Developed Multiparameter Chorus and Plasmaspheric Hiss Wave Models

Numerical simulation studies of the Earth's radiation belts are important to understand the acceleration and loss of energetic electrons. The Comprehensive Inner Magnetosphere-Ionosphere (CIMI) model considers the effects of the ring current and plasmasphere on the radiation belts to obtain plausible results. The CIMI model incorporates pitch angle, energy, and cross diffusion of electrons, due to chorus and plasmaspheric hiss waves. These parameters are calculated using statistical wave distribution models of chorus and plasmaspheric hiss amplitudes. However, currently, these wave distribution models are based only on a single-parameter, geomagnetic index (AE) and could potentially underestimate the wave amplitudes. Here we incorporate recently developed multiparameter chorus and plasmaspheric hiss wave models based on geomagnetic index and solar wind parameters. We then perform CIMI simulations for two geomagnetic storms and compare the flux enhancement of megavolt electrons with data from the Van Allen Probes and Akebono satellites. We show that the relativistic electron fluxes calculated with multiparameter wave models resemble the observations more accurately than the relativistic electron fluxes calculated with single-parameter wave models. This indicates that wave models based on a combination of geomagnetic index and solar wind parameters are more effective as inputs to radiation belt models.

Aryan, Homayon↗
NASA NTRS1991

The preliminary feasibility of intercalated graphite railgun armatures

Graphite intercalation compounds may provide an excellent material for the fabrication of electromagnetic railgun armatures. As a pulse of power is fed into the armature the intercalate could be excited into the plasma state around the edges of the armature, while the bulk of the current would be carried through the graphite block. Such an armature would have both diffuse plasma armatures and bulk conduction armatures. In addition, the highly anisotropic nature of these materials could enable the electrical and thermal conductivity to be tailored to meet the specific requirements of electromagnetic railgun armatures. Preliminary investigations have been performed in an attempt to determine the feasibility of using graphite intercalation compounds as railgun armatures. Issues of fabrication, resistivity, stability, and electrical current spreading have been addressed for the case of highly oriented pyrolytic graphite.

Gaier, James R.↗