Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffuse interface method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

On the delta-type doping of GaAs-based heterostructures with manganese compounds

Heterostructures, which incorporate GaAs/InGaAs/GaAs quantum wells and are doped with spatially remote monatomic Mn layers, are formed on GaAs(001) substrate under conditions of multilayer buildup by the method of molecular-beam epitaxy. Combined studies of the obtained samples were performed by the method of secondary-ion mass spectrometry, by measurements of X-ray diffraction, and using a transmission electron microscope. The heterostructures under study with a doping impurity concentration amounting to 0.5 single layers are elastically stressed and demonstrate planar clearly defined interfaces without visible extended or point defects. A method for visualization of the distribution of the manganese concentration in the three-dimensional GaAs matrix in the vicinity of a quantum well is suggested. According to experimental results, there is a probability for manganese diffusion into the GaAs/InGaAs/GaAs quantum well when the critical thickness of the GaAs buffer layer is decreased to a value smaller than 3 nm.

36 MATERIALS SCIENCE↗

On the cause of the flat-spot phenomenon observed in silicon solar cells at low temperatures and low intensities

A model is presented that explains the "flat-spot" (FS) power loss phenomenon observed in silicon solar cells operating deep space (low temperature, low intensity) conditions. Evidence is presented suggesting that the effect is due to localized metallurgical interactions between the silicon substrate and the contact metallization. These reactions are shown to result in localized regions in which the PN junction is destroyed and replaced with a metal-semiconductor-like interface. The effects of thermal treatment, crystallographic orientation, junction depth, and metallurization are presented along with a method of preventing the effect through the suppression of vacancy formation at the free surface of the contact metallization. Preliminary data indicating the effectiveness of a TiN diffusion barrier in preventing the effect are also given.

Weizer, V. G.↗

On the cause of the flat-spot phenomenon observed in silicon solar cells at low temperatures and low intensities

A model is presented that explains the 'flat-spot' power-loss phenomenon observed in silicon solar cells operating under deep space (low temperature, low intensity) conditions. Evidence is presented suggesting that the effect is due to localized metallurgical interactions between the silicon substrate and the contact metallization. These reactions are shown to result in localized regions in which the PN junction is destroyed and replaced with a metal-semiconductor-like interface. The effects of thermal treatment, crystallographic orientation, junction depth, and metallization are presented along with a method of preventing the effect through the suppression of vacancy formation at the free surface of the contact metallization. Preliminary data indicating the effectiveness of a TiN diffusion barrier in preventing the effect are also given.

Weizer, V. G.↗

A survey of nested grid techniques and their potential for use within the MASS weather prediction model

A survey of various one- and two-way interactive nested grid techniques used in hydrostatic numerical weather prediction models is presented and the advantages and disadvantages of each method are discussed. The techniques for specifying the lateral boundary conditions for each nested grid scheme are described in detail. Averaging and interpolation techniques used when applying the coarse mesh grid (CMG) and fine mesh grid (FMG) interface conditions during two-way nesting are discussed separately. The survey shows that errors are commonly generated at the boundary between the CMG and FMG due to boundary formulation or specification discrepancies. Methods used to control this noise include application of smoothers, enhanced diffusion, or damping-type time integration schemes to model variables. The results from this survey provide the information needed to decide which one-way and two-way nested grid schemes merit future testing with the Mesoscale Atmospheric Simulation System (MASS) model. An analytically specified baroclinic wave will be used to conduct systematic tests of the chosen schemes since this will allow for objective determination of the interfacial noise in the kind of meteorological setting for which MASS is designed. Sample diagnostic plots from initial tests using the analytic wave are presented to illustrate how the model-generated noise is ascertained. These plots will be used to compare the accuracy of the various nesting schemes when incorporated into the MASS model.

Koch, Steven E.↗

Method of transferring strained semiconductor structure

The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. An interface that includes the contaminants is formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the deposited multilayer structure is bonded to a second substrate and is separated away at the interface, which results in transferring a multilayer structure from one substrate to the other substrate. The multilayer structure includes at least one strained semiconductor layer and at least one strain-induced seed layer. The strain-induced seed layer can be optionally etched away after the layer transfer.

36 MATERIALS SCIENCE↗

Atomistic thermodynamics and kinetics of dicalcium silicate dissolution

Low-temperature cement manufacturing has garnered academic and industrial attention for its low environmental footprints. However, the sluggish hydration kinetics of the resultant cement affects their early-age strength development. This motivates fundamental studies to unravel the mechanistic picture of the dissolution process and discover science-informed pathways to accelerate hydration. Standard atomistic simulations seldomly exceed a microsecond making them impractical to study slow dissolution processes. We are using rare event sampling techniques, we provide the mechanistic picture of Ca 2+ ion dissolution from a kink site on the dicalcium silicate surface. The Ca 2+ ion dissolution is comprised of two sequential stages: breaking restraints from the kink sites to form a ledge adatom and detaching from the ledge/terrace adatom sites into the solution. The first and second stages feature free energy barriers of ~63 kJ/mol and ~ 29 kJ/mol respectively, making the first stage the rate-limiting step of the entire Ca 2+ dissolution kinetics. Using the reactive flux method, the rate and equilibrium constants for each reaction step are calculated, which yield the Ca 2+ ion activity of ~1.03 × 10 -5 . The diffusion calculations indicate that the surface effects lower the self-diffusion coefficient of Ca 2+ ions at the solid-water interface.

36 MATERIALS SCIENCE↗

Modeling of High-Temperature Corrosion of Zirconium Alloys Using the eXtended Finite Element Method (X-FEM)

Oxidation modeling in modern nuclear fuel performance codes is currently limited by the lack of coupling with mechanics, thus preventing proper description of how high-temperature oxidation impacts mechanical properties. This is mostly due to the fact that the finite difference formalism adopted in corrosion models is incompatible with the direct coupling with mechanics in the finite element modeling employed in modern nuclear fuel performance codes. In this study, a physically based zirconium alloy corrosion model called the Coupled-Current Charge Compensation (C4) model, which was initially developed for operating temperature conditions, has been updated to include high-temperature corrosion in order to provide additional critical information (e.g., oxygen concentration profile) under loss-of-coolant accident (LOCA) conditions—information lacking in existing empirical models. The C4 model was implemented in the MOOSE finite-element framework developed at Idaho National Laboratory, enabling it to be used in the BISON nuclear fuel performance code based on the MOOSE framework. To precisely track the different interfaces at a relatively low computational cost, the eXtended Finite Element Method (X-FEM) was applied in MOOSE. The model’s results were compared to those of existing empirical models as well as metallographic analysis of high-temperature oxidized Zircaloy-4 coupons. Oxygen diffusivities in the a and ß phases resulting from this comparison closely agree with those found in the literature. The C4 model implemented with X-FEM in MOOSE now has the capability to accurately predict oxide, oxygen-stabilized a, and prior ß phase layer growth kinetics under isothermal exposure at high temperature (1000–1500°C). Furthermore, in contrast with the empirical models, the C4 model accounts for the finite thickness of the fuel cladding. It can predict the oxygen concentration profile evolution through the whole cladding, enabling evaluation of the remaining ductile thickness—a crucial variable for modeling the mechanical behavior of the fuel cladding under LOCA. Furthermore, this implementation allows direct coupling with mechanics, at a low computing cost, using finite-element-based nuclear fuel performance codes such as BISON.

36 MATERIALS SCIENCE↗

A multiscale model to understand the interface chemistry, contacts, and dynamics during lithium stripping

A reversible Li-metal electrode, paired with a solid electrolyte, is critical for attaining higher energy density and safer batteries beyond the current lithium-ion cells. A stable stripping process may be even harder to attain as the stripping process will remove Li-atoms from the surface, and naturally reduce surface contact area, if not self-corrected by other mechanisms, such as diffusion and plastic deformation under an applied external stack pressure. Here, we capture these mechanisms occurring at multiple length- and time- scales, i.e., interface interactions, vacancy hopping, and plastic deformation, by integrating density functional theory (DFT) simulations, kinetic Monte Carlo (KMC), and continuum finite element method (FEM). By assuming the self-affine nature of multiscale contacts, we predict the steady-state contact area as a function of stripping current density, interface wettability, and stack pressure. We further estimate the exponential increase of overpotential due to contact area loss to maintain the same stripping current density. We demonstrate that a lithiophilic interface requires less stack pressure to reach the same steady-state contact area fraction than a lithiophobic interface. A “tolerable steady-state” contact area loss for maintaining stable stripping is estimated at 20 %, corresponding to a 10 % increase in overpotential. To constrain contact loss within the tolerance, the required stack pressure is 0.1, 0.5, and 2 times the yield strength of lithium metal for three distinct interfaces, lithiophilic Li/lithium oxide(Li2O), Li/lithium lanthanum zirconium oxide(LLZO), and lithiophoblic Li/lithium fluoride(LiF), respectively. The modeling results agree with experiments on the impact of the stack pressure quantitatively, while the discrepancy in stripping rate sensitivity is attributed to the simplifying interface interaction in our simulations. Overall, this multiscale simulation framework demonstrates the importance of electrochemical-mechanical coupling in understanding the dynamics of the Li/SE interface during stripping.

Feng, Min↗

Nanoscale Interfacial Engineering for Flexible Barrier Films

Alternating layers of organic and oxide thin films used as diffusion barriers in emerging flexible device technologies are vulnerable to degradation under the influence of mechanical stresses, temperature cycling, photodegradation, and chemically active environmental species. Delamination of the internal organic to oxide interfaces often limits the operational lifetime of the barrier system. We demonstrate a method for increasing the adhesion of organic and oxide thin films by generating nanostructures at the interface. We show that the adhesion of an acrylate to silicon oxide model system can be increased by up to an order of magnitude (from ~2 J/ m 2 to 24 J/m 2 ). Here, by altering the diameter and depth of the patterns in the model systems, the adhesion energy can be changed, and the delamination pathway can be controlled. In addition, we show that a patterned interface maintains a higher adhesion than its planar counterpart for all durations of UV–A and UV–B exposure

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Scaling Laws of Exciton Recombination Kinetics in Low Dimensional Halide Perovskite Nanostructures

Carrier recombination is a crucial process governing the optical properties of a semiconductor. Although various theoretical approaches have been utilized to describe carrier behaviors, a quantitative understanding of the impact of defects and interfaces in low dimensional semiconductor systems is still elusive. Here, we develop a model system consisting of chemically tunable, highly luminescent halide perovskite nanocrystals to illustrate the role of carrier diffusion and material dimensionality on the carrier recombination kinetics and luminescence efficiency. Our advanced synthetic methods provide a well-controlled colloidal system consisting of nanocrystals with different aspect ratios, halide compositions, and surface conditions. Using this system, we reveal the scaling laws of photoluminescence quantum yield and radiative lifetime with respect to the aspect ratio of nanocrystals. The scaling laws derived herein are not only a phenomenological observation but proved a powerful tool disentangling the carrier dynamics of microscopic systems in a quantitative and interpretable manner. The investigation of our model system and theoretical formulation bring to light the dimensionality, as a hidden constraint on carrier dynamics, and identify the diffusion length as an important parameter that distinguishes nanoscale and macroscale carrier behaviors. Furthermore, the conceptual distinction in carrier dynamics in different dimensionality regimes informs new design rules for optical devices where complex microstructures are involved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial growth of Co{sub 2}MnSi thin films at the vicinal surface of n-Ge(111) substrate

The structure and magnetic properties of Co{sub 2}MnSi films on n-Ge(111) substrate were investigated for the motivation of spin injection. The 50-nm-thick Co{sub 2}MnSi films were fabricated on n-Ge(111) substrates by dc sputtering and postannealed about 1 h at the various temperatures ranging from 200-500 deg. C. In the annealing temperature range of 300-400 deg. C, the Co{sub 2}MnSi were grown epitaxially at the vicinal surface of n-Ge(111) substrates. The epitaxial layer of Co{sub 2}MnSi films was about 18 nm thick at 350 deg. C and exhibited ferromagnetic behavior. Interestingly, there was no diffusion of Ge inside the epitaxial layer and atomically flat interface was obtained.

36 MATERIALS SCIENCE↗

Final Report for Department of Energy/EERE (for public release)

Developing CIGS solar cells calls for the understanding of materials and processing in order to translate the record small efficiency to module and the strategy to produce thin cells for materials and processing saving. This project has exploited nanostructuring of CIG solar cells, including nanowires and nanotextured substrates. We showed that nanowires function as well-defined CIGS-CdS p-n junction for understanding the chemical fluctuation, defect formation interface and grain boundary behaviors and the effect of ion diffusion, which are important but complicated issues for solar cell fabrication. We have also demonstrated effective nanoscale photon management on nanotextured substrate to provide opportunity for thin CIGS solar cells. We also developed the scalable methods for producing such nanotextured substrates. The research output in this project helps advancing the CIGS solar cells and broadly other solar cell technologies in cost reduction per unit power.

14 SOLAR ENERGY↗

Time-dependent MOS breakdown

A general model for time-dependent breakdown in metal-oxide-silicon (MOS) structures is developed and related to experimental measurements on samples deliberately contaminated with Na. A statistical method is used for measuring the breakdown probability as a function of log time and applied field. It is shown that three time regions of breakdown can be explained respectively in terms of silicon surface defects, ion emission from the metal interface, and lateral ion diffusion at the silicon interface.

Li, S. P.↗

Surface roughness scattering of electrons in bulk mosfets

Surface-roughness scattering of electrons at the Si-SiO 2 interface is a very important consideration when analyzing Si metal-oxide-semiconductor field-effect transistors (MOSFETs). Scattering reduces the mobility of the electrons and degrades the device performance. 250-nm and 50-nm bulk MOSFETs were simulated with varying device parameters and mesh sizes in order to compare the effects of surface-roughness scattering in multiple devices. The simulation framework includes the ensemble Monte Carlo method used to solve the Boltzmann transport equation coupled with a successive over-relaxation method used to solve the two-dimensional Poisson's equation. Four methods for simulating the surface-roughness scattering of electrons were implemented on both devices and compared: the constant specularity parameter, the momentum-dependent specularity parameter, and the real-space-roughness method with both uniform and varying electric fields. The specularity parameter is the probability of an electron scattering speculariy from a rough surface. It can be chosen as a constant, characterizing partially diffuse scattering of all electrons from the surface the same way, or it can be momentum dependent, where the size of rms roughness and the normal component of the electron wave number determine the probability of electron-momentum randomization. The real-space rough surface method uses the rms roughness height and correlation length of an actual MOSFET to simulate a rough interface. Due to their charge, electrons scatter from the electric field and not directly from the surface. If the electric field is kept uniform, the electrons do not perceive the roughness and scatter as if from a at surface. However, if the field is allowed to vary, the electrons scatter from the varying electric field as they would in a MOSFET. These methods were implemented for both the 50-nm and 250-nm MOSFETs, and using the rms roughness heights and correlation lengths for real devices. The current-voltage and mobility-electric field curves were plotted for each method on the two devices and compared. The conclusion is that the specularity-parameter methods are valuable as simple models for relatively smooth interfaces. However, they have limitations, as they cannot accurately describe the drastic reduction in the current and the electron mobility that occur in MOSFETs with very rough Si-SiO 2 interfaces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Formation of blade and slot die coated small molecule multilayers for OLED applications studied theoretically and by XPS depth profiling

Slot die coaters especially designed for low material consumption and doctor blades were used to process small molecule solutions for organic light-emitting diodes (OLEDs). Optimum process parameters were developed for the large-scale coating techniques to generate stable single and multiple layers only a few nanometers thick. Achieving a multilayer architecture for solution-processed OLEDs is the most challenging step. X-ray photoelectron spectroscopy sputter depth profiling was performed to determine defined interfaces between coated organic layers. Commercially available small molecules NPB (N,N’-Di(1-naphthyl)-N,N’-diphenyl-(1,1’-biphenyl)-4,4’-diamine) and BAlq (Bis(8-hdroxy-2methylquinoline)-(4-phenylphenoxy)aluminum), originally developed for vacuum deposition, were used as hole, respectively electron transport material. Defined double-layers were processed with both scalable coating methods using the orthogonal solvent approach. The use of non-orthogonal solvents resulted in complete intermixing of the material. The results are explained by calculations of solubilities and simulating drying and diffusion kinetics of the small molecule solutions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetohydrodynamic Control of Interfacial Degradation in Lithium-Ion Batteries for Fast Charging Applications

Interfacial anodic degradation in graphitic materials under fast charging conditions causes severe performance loss and safety hazard in lithium ion batteries. We present a novel method for minimizing the growth of these aging mechanism by application of an external magnetic field. Under magnetic field, paramagnetic lithium ions experience a magnetohydrodynamic force, which rotates the perpendicularly diffusing species and homogenizes the ionic transport. This phenomenon minimizes the overpotential hotspots at the anode/separator interface, consequently reducing SEI growth, lithium plating, and interfacial fracture. In situ electrochemical measurements indicate an improvement in capacity for lithium cobalt oxide/graphite pouch cell (20 mAh) charged from 1–5 C under an applied field of 1.8 kG, with a maximum capacity gain of 22% at 5C. Post-mortem FE-SEM and EDS mapping shows that samples charged with magnetic field have a reduced lithium deposition at 3C and a complete suppression of interfacial fracture at 5C. At 5C, a 24% reduction in the lithium content is observed by performing XPS on the anodic interfacial film. Finally, fast charging performance under variable magnetic field strengths indicate a saturation behavior in capacity at high fields (>2 kG), thereby limiting the field and consequent energy requirements to obtain maximum capacity gain under extreme conditions.

electromagnetism↗

Recovery Act - Nano-composite Structures for OPV Devices

Improved material for use in organic photovoltaics (OPV) devices, also called polymer-solar cells (PSC), has been developed. Increased ordering of the active layer of bulk heterojunction (BHJ) cells has been achieved by the use of inert silica spheres in conjunction with suitable fullerene derivatives. Silica spheres with average diameters between 10 and 15 nm, consistent with the exciton diffusion length in the active layer, have been added. The potential for significantly improved device performance due to a higher degree of photon absorption, enabled by increased light scattering, and a maximized interface between electron donor and acceptor, ensuring efficient exciton dissociation, has been demonstrated. A method allowing for the covalent attachment of fullerene derivatives to the silica sphere surface has been developed.

14 SOLAR ENERGY↗