Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffraction contrast”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

High efficiency glass-based VUV metasurfaces

Most advances in metaoptics have been made at visible wavelengths and above; in contrast, the vacuum ultraviolet (VUV) has barely been explored despite numerous scientific and technological opportunities. Creating metaoptic elements at this short wavelength is challenging due to the scarcity of VUV transparent materials and the small sizes of the required nanostructures. Here, we present the first transmissive VUV (175 nm) metalens. By using UV-grade silica and trading off the Nyquist requirement for subwavelength structures against feasibility of the fabrication process, we achieve a step-change in diffraction efficiencies for wavelengths shorter than 300 nm. Our large numerical aperture (NA = 0.5) metalens shows an average diffraction efficiency of (53.3 ± 1.4)%. This demonstration opens up new avenues for compact flat optic systems operating in the VUV range.

Martins, Augusto [Univ. of York (United Kingdom)] ↗

Neutron Radiography and Computed Tomography of Biological Systems at the Oak Ridge National Laboratory's High Flux Isotope Reactor

Neutrons have historically been used for a broad range of biological applications employing techniques such as small-angle neutron scattering, neutron spin echo, diffraction, and inelastic scattering. Unlike neutron scattering techniques that obtain information in reciprocal space, attenuation-based neutron imaging measures a signal in real space that is resolved on the order of tens of micrometers. The principle of neutron imaging follows the Beer-Lambert law and is based on the measurement of the bulk neutron attenuation through a sample. Greater attenuation is exhibited by some light elements (most notably, hydrogen), which are major components of biological samples. Contrast agents such as deuterium, gadolinium, or lithium compounds can be used to enhance contrast in a similar fashion as it is done in medical imaging, including techniques such as optical imaging, magnetic resonance imaging, X-ray, and positron emission tomography. For biological systems, neutron radiography and computed tomography have increasingly been used to investigate the complexity of the underground plant root network, its interaction with soils, and the dynamics of water flux in situ. Moreover, efforts to understand contrast details in animal samples, such as soft tissues and bones, have been explored. This manuscript focuses on the advances in neutron bioimaging such as sample preparation, instrumentation, data acquisition strategy, and data analysis using the High Flux Isotope Reactor CG-1D neutron imaging beamline. The aforementioned capabilities will be illustrated using a selection of examples in plant physiology (herbaceous plant/root/soil system) and biomedical applications (rat femur and mouse lung).

Bilheux, Hassina↗

Mapping the structural, magnetic and electronic behavior of (Eu 1-x Ca x ) 2 Ir 2 O 7 across a metal-insulator transition

In this study, we employ bulk electronic properties characterization and x-ray scattering/spectroscopy techniques to map the structural, magnetic and electronic properties of (Eu 1-x Ca x ) 2 Ir 2 O 7 as a function of Ca-doping. As expected, the metal-insulator transition temperature, T-MIT, decreases with Ca-doping until a metallic state is realized down to 2 K. In contrast, T-AFM becomes decoupled from the MIT and (likely short-range) AFM order persists into the metallic regime. This decoupling is understood as a result of the onset of an electronically phase separated state, the occurrence of which seemingly depends on both synthesis method and rare earth site magnetism. PDF analysis suggests that electronic phase separation occurs without accompanying chemical phase segregation or changes in the short-range crystallographic symmetry while synchrotron x-ray diffraction confirms that there is no change in the long-range crystallographic symmetry. X-ray absorption measurements confirm the $J_{eff}$ = 1/2 character of (Eu 1-x Ca x ) 2 Ir 2 O 7 . Surprisingly these measurements also indicate a net electron doping, rather than the expected hole doping, indicating a compensatory mechanism. Lastly, XMCD measurements show a weak Ir magnetic polarization that is largely unaffected by Ca-doping. Keywords: term, term, term.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain-induced majority carrier inversion in ferromagnetic epitaxial LaCo O 3 - δ thin films

Tensile-strained LaCoO 3-δ thin films are ferromagnetic, in sharp contrast to the zero-spin bulk, although no clear consensus has emerged as to the origin of this phenomenon. While magnetism has been heavily studied, relatively little attention has been paid to electronic transport, due to the insulating nature of the strain-stabilized ferromagnetic state. Here, structure, magnetism, and transport are studied in epitaxial LaCoO 3-δ films (10–22-nm thick) on various substrates (from 1.4% compressive to 2.5% tensile strain), using synchrotron x-ray diffraction, scanning probe and transmission electron microscopy, magnetometry, polarized neutron reflectometry, resistivity, and Hall effect. High quality, smooth films are obtained, exhibiting superstructures associated with both oxygen vacancy ordering and periodic in-plane ferroelastic domains. Consistent with prior work, ferromagnetism with an approximately 80–85 K Curie temperature is observed under tension; polarized neutron reflectometry confirms a relatively uniform magnetization depth profile, albeit with interfacial dead layer formation. Electrical transport is found to have similar semiconducting nature to bulk, but with reduced resistivity and activation energy. Hall effect measurements, however, reveal a striking inversion of the majority carrier type, from p-type in the bulk and under compression to n-type under tension. While thus far overlooked, ferromagnetism in epitaxial LaCoO 3-δ films is thus directly correlated with n-type behavior, providing important insight into the ferromagnetic state in this system. Here, aided by density functional theory calculations, these results are interpreted in terms of tensile-strain-induced orbital occupation and band structure changes, including a rapid decrease in effective mass at the e g -derived conduction band minimum, and corresponding increase at the valence band maximum.

36 MATERIALS SCIENCE↗

Nitrene Photochemistry of Manganese N ‐Haloamides**

Abstract Manganese complexes supported by macrocyclic tetrapyrrole ligands represent an important platform for nitrene transfer catalysis and have been applied to both C−H amination and olefin aziridination catalysis. The reactivity of the transient high‐valent Mn nitrenoids that mediate these processes renders characterization of these species challenging. Here we report the synthesis and nitrene transfer photochemistry of a family of Mn III N ‐haloamide complexes. The S= 2 N ‐haloamide complexes are characterized by 1 H NMR, UV‐vis, IR, high‐frequency and ‐field EPR (HFEPR) spectroscopies, and single‐crystal X‐ray diffraction. Photolysis of these complexes results in the formal transfer of a nitrene equivalent to both C−H bonds, such as the α‐C−H bonds of tetrahydrofuran, and olefinic substrates, such as styrene, to afford aminated and aziridinated products, respectively. Low‐temperature spectroscopy and analysis of kinetic isotope effects for C−H amination indicate halogen‐dependent photoreactivity: Photolysis of N ‐chloroamides proceeds via initial cleavage of the Mn−N bond to generate Mn II and amidyl radical intermediates; in contrast, photolysis of N ‐iodoamides proceeds via N−I cleavage to generate a Mn IV nitrenoid (i.e., {MnNR} 7 species). These results establish N ‐haloamide ligands as viable precursors in the photosynthesis of metal nitrenes and highlight the power of ligand design to provide access to reactive intermediates in group‐transfer catalysis.

Van Trieste, III, Gerard P.↗

Deviatoric stress-induced metallization, layer reconstruction and collapse of van der Waals bonded zirconium disulfide

In contrast to two-dimensional (2D) monolayer materials, van der Waals layered transition metal dichalcogenides exhibit rich polymorphism, making them promising candidates for novel superconductor, topological insulators and electrochemical catalysts. Here, we highlight the role of hydrostatic pressure on the evolution of electronic and crystal structures of layered ZrS2. Under deviatoric stress, our electrical experiments demonstrate a semiconductor-to-metal transition above 30.2 GPa, while quasi-hydrostatic compression postponed the metallization to 38.9 GPa. Both X-ray diffraction and Raman results reveal structural phase transitions different from those under hydrostatic pressure. Under deviatoric stress, ZrS2 rearranges the original ZrS6 octahedra into ZrS8 cuboids at 5.5 GPa, in which the unique cuboids coordination of Zr atoms is thermodynamically metastable. The structure collapses to a partially disordered phase at 17.4 GPa. These complex phase transitions present the importance of deviatoric stress on the highly tunable electronic properties of ZrS2 with possible implications for optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of thermal treatment on structure and catalytic performance of ceria-zirconia supported copper oxide (CuO x /Ce y Zr 1-y O 2 ) catalysts for CO oxidation

Copper oxide (CuO x ) supported on ceria-zirconia (Ce y Zr 1-y O 2 , y = 1.0, 0.5, 0.0) catalysts were investigated to elucidate the effects of thermal treatment on their physicochemical properties and catalytic performance in carbon monoxide (CO) oxidation. Here, the catalysts were synthesized via a one-pot chemical vapor deposition (OP-CVD) method at 700˚C and 900˚C with controlled Cu loading. Characterization techniques, including synchrotron X-ray diffraction (S-XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma spectroscopy (ICP), and N 2 adsorption-desorption, were implemented to probe the crystalline structure, molecular and electronic structure, oxygen vacancies, specific surface area (SSA) and metal loading. CO oxidation was chosen as a model reaction to explore the structure-catalytic performance relationship. A ∼100% CO conversion was achieved at < 150˚C, particularly with the CuO x /CeO 2 catalyst calcined at 700˚C. In contrast, calcination at 900˚C caused a ∼90% decrease in SSA and a ∼24% increase in T 50 . Activity tests revealed that increasing ZrO 2 content lowered CO oxidation activity despite generating more defect sites. In-situ measurement of the 700 °C calcined samples revealed the presence of stable and unstable defects in CuO x /Ce 0.5 Zr 0.5 O 2 and CeO 2 respectively, which play a key role in the activity of the catalysts. The results highlight that catalytic performance is closely related to the SSA. Furthermore, an optimum calcination temperature favor significant oxygen vacancy formation with required CuO x -support interactions, enhancing redox properties and catalytic performance.

36 MATERIALS SCIENCE↗

Modification of magnetic ground state in Tb 2 Ni 0.90 Si 2.94 by thermal annealing

In this work, we have investigated the thermal annealing effect on the physical properties of an AlB 2 -type ternary intermetallic compound, Tb 2 Ni 0.90 Si 2.94 , that undergoes spin freezing behaviour coexisting with spatially limited antiferromagnetic phase below 9.9 K in as-cast form. Thermal annealing effect is found to result in considerable changes in the magnetic ground state properties of the system. Though only one magnetic transition around 9.9 K is observed for as-cast compound, the annealed sample exhibits two distinct magnetic transitions; one around T N ~ 13.5 K and another around T f ~ 4 K. The magnetization measurements and zero field neutron diffraction study reveal that the high temperature transition is antiferromagnetic type, though of limited correlation length, while the low temperature transition corresponds to spin freezing behaviour. The ac susceptibility and heat capacity studies also confirm the existence of frustrated cluster glass state at lower temperature than the antiferromagnetic ordering temperature. Additionally, ac susceptibility data exhibits signature of an additional peak in the even lower temperature region (at 2.2 K for zero frequency) that tends to shift in opposite direction with frequency in contrast to that observed for conventional glassy transitions. The change in intrinsic local structural disorder of Ni and Si ions associated with annealing has been argued to be responsible for the different magnetic behaviour in as-cast and annealed samples.

36 MATERIALS SCIENCE↗

Characterization of Alloy 709 Commercial Heats

The creep-resistant austenitic stainless steel Alloy 709 (Fe-20Cr-25Ni (wt%) based steel) is being investigated as a candidate structural material for the next generation of advanced reactors. Unlike conventional solid solution strengthened austenitic stainless steels, Alloy 709 develops a variety of precipitates during aging at different temperatures and times. In this study, precipitate evolution during short-term aging at 775°C was characterized. The effect of aging time (e.g., 10 vs. 100 hours) and cooling after aging (e.g., water quench vs. air cool) on grain size and precipitates have been investigated using light optical microscopy (OM), electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). MX (Ni,Tb)(C,N) and M23C6 (Cr,Mo)C precipitates were observed in all the statically-aged samples. The grain size distribution in the sample aged for 10 hours and water quenched (10Q) versus the one aged for 100 hours and air cooled (100A) were comparable. This indicates that grain structure was fairly stable when aging at 775°C for up to 100 hours. In contrast, the sample aged for 10 hours and air cooled (10A) showed the smallest and the most uniform grain size distribution. This phenomenon was observed in only one sample. More studies on duplicate samples are needed to confirm the results obtained. The cooling medium (e.g., water quench vs. air cool) was not observed to impact the size nor the distribution of the MX and M23C6 precipitates. Increasing the aging time resulted in the following: (1) a decrease in dislocations as well as the number density of small precipitates; (2) an increase in the ratio of free precipitates that were not pinning dislocations; (3) relatively higher N, Nb, and Ti concentration in MX precipitate; (4) some increase in length of M23C6 carbides which were located on the coherent boundaries; and (5) the introduction of Sienriched M6X precipitates. The tensile tests at room temperature showed similar properties for each of the static aging treatments, indicating that the differences observed in the microstructural analysis did not have a significant impact on the tensile properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Samarium: from a distorted-fcc phase to melting under dynamic compression using in-situ x-ray diffraction

Abstract Lattice and electronic structure interactions for f -electrons are fundamental challenges for lanthanide equation of state development. Difficulties in first-principles calculations, such as density functional theory (DFT), emphasize the need for well-characterized experimental data. Here, we measure in-situ x-ray diffraction of shocked samarium (Sm) and temperature along the Hugoniot for the first time, providing direct evidence for phase transitions. We report direct evidence of a distorted fcc (dfcc) phase at 23 GPa. Shocked samarium melts from the dfcc phase starting at 33 GPa (1333 K), with complete melt at 40 GPa (1468 K). Previous work indicated shock melt at 27 GPa (1200 K), underscoring the significance of x-ray measurements for detecting phase transitions. Interestingly, our observed melting is in sharp contrast with the melting reported by a diamond anvil cell study. These experimental data can tightly constrain first principles calculations and serve as key touchstones for equation of state modeling.

36 MATERIALS SCIENCE↗

Relationship between magnetoresistance behavior and magnetic states in intercalated compounds Fe x TiS 2

Here, temperature and field-dependent neutron powder diffraction (NPD) measurements have been performed to reveal the nature of the unusual evolution of the magnetoresistance behavior with increasing Fe content in the intercalated compounds Fe x TiS 2 (with x=0.25,0.33,0.50,0.55) synthesized by solid-phase reaction method with prolonged homogenization heat treatment. As derived from neutron diffraction measurements, both the Fe 0.25 TiS 2 and the Fe 0.50 TiS 2 compound exhibit an antiferromagnetic (AFM) order below their respective Néel temperatures T N ≈52 K and T N ≈140K, which results in the presence of a large magnetoresistance accompanying the field-induced phase transition from AFM to the ferromagnetic (FM) state. At low temperatures, this AFM-FM transition is irreversible, confirmed by the irreversibility of changes in the NPD patterns and the presence of remnant magnetoresistance. In contrast, Fe 0.33 TiS 2 shows short-range magnetic order at T f ≈44 K due to a triangular network of intercalated Fe atoms and frustrations of exchange interactions with a field-induced FM alignment of Fe magnetic moments in an applied magnetic field as revealed by NPD measurements. The field-induced transformations of the cluster glass magnetic state in this compound lead to a significant decrease in electrical resistivity. According to NPD data, a reduced impact of an external magnetic field on the electrical resistivity of the compound Fe 0.55 TiS 2 can be ascribed to the presence of ferromagnetic or ferrimagnetic order in compounds with the Fe concentrations above x=0.50. The results obtained indicate that the distribution of the Fe atoms, along with their concentration in Fe x TiS 2 layered compounds, plays a decisive role in the formation of the magnetic state and the behavior of the magnetoresistance.

36 MATERIALS SCIENCE↗

Phase Transformation and Water Adsorption Behavior of As‐Deposited and Annealed Ru Metal Thin Films Prepared by Atomic Layer Deposition

ABSTRACT Surfaces play a central role in catalytic processes, and understanding the transformation of ruthenium metal into ruthenium oxide during annealing is essential for tailoring functional catalytic interfaces. In this study, we systematically investigate ≈22 nm thick Ru metal films deposited by atomic layer deposition (ALD) at 300°C, focusing on their chemical composition, structural evolution, and surface hydration behavior following post‐deposition annealing in air from 400 to 600°C. Lab‐based and synchrotron X‐ray photoelectron spectroscopy (XPS) reveal a gradual conversion from metallic Ru to fully oxidized Ru 4+ with increasing annealing temperature, accompanied by a corresponding increase in lattice oxygen. X‐ray diffraction (XRD) shows amorphous Ru oxide phases at 400°C and 500°C that evolve into crystalline RuO 2 at 600°C, while atomic force microscopy (AFM) indicates enhanced grain growth and surface roughening upon annealing. Ambient‐pressure XPS (AP‐XPS) under controlled H 2 O vapor environments (1–17 Torr) demonstrates that samples annealed at 400°C and 500°C exhibit initially high hydroxyl coverage that decreases with increasing water vapor pressure, concurrent with a rise in molecular H 2 O adsorption. In contrast, the crystalline RuO 2 surface formed at 600°C maintains stable hydroxylation and supports increased water uptake. Overall, this work provides fundamental insight into Ru oxide–H 2 O interactions and establishes design principles for engineering oxide surfaces optimized for electrocatalytic applications.

APXPS↗

Hollow Ptychography: Toward Simultaneous 4D Scanning Transmission Electron Microscopy and Electron Energy Loss Spectroscopy

With the recent development of high-acquisition-speed pixelated detectors, 4D scanning transmission electron microscopy (4D-STEM) is becoming routinely available in high-resolution electron microscopy. 4D-STEM acts as a “universal” method that provides local information on materials that is challenging to extract from bulk techniques. It extends conventional STEM imaging to include super-resolution techniques and to provide quantitative phase-based information, such as differential phase contrast, ptychography, or Bloch wave phase retrieval. However, an important missing factor is the chemical and bonding information provided by electron energy loss spectroscopy (EELS). 4D-STEM and EELS cannot currently be acquired simultaneously due to the overlapping geometry of the detectors. Here, the feasibility of modifying the detector geometry to overcome this challenge for bulk specimens is demonstrated, and the use of a partial or defective detector for ptycholgaphic structural imaging is explored. Here, results show that structural information beyond the diffraction-limit and chemical information from the material can be extracted together, resulting in simultaneous multi-modal measurements, adding the additional dimensions of spectral information to 4D datasets.

4D-scanning transmitting electron microscopy (STEM↗

Challenges in correlating oxygen stable isotope ratios of hydrates on uranium ore concentrates to process waters

Exchange of oxygen stable isotopes (δ 18 O values) between precipitation waters and uranium oxides is governed by thermodynamics or kinetics. It has been assumed that meteoric waters can be related to precipitation waters in uranium ore concentrates and their calcination and reduced uranium oxide products. With this assumption, the δ 18 O values of uranium materials could provide forensic signatures that identify the production history and geolocation of nuclear materials. To further exploit the potential of δ 18 O values in nuclear material analysis, this study examines the oxygen stable isotope exchange in two UOCs, magnesium diuranate (MDU) and sodium diuranate (SDU). MDU and SDU were synthesized from solutions of uranyl nitrate hexahydrate using precipitation waters with unique oxygen isotope compositions. The structures of the MDU and SDU were analyzed using powder X-ray diffraction (p-XRD) and thermal mass loss curves, while the δ 18 O values of waters generated during thermal decomposition were analyzed using a thermogravimetric analyzer coupled to an isotope ratio infrared spectrometer (TGA-IRIS). By p-XRD, the MDU was uniform and amorphous across all syntheses with residual crystalline material incorporated as a minor component. Combined with the TGA results, all of the MDU is likely amorphous MgU 2 O 7 ·3H 2 O with MgO impurities present throughout. In contrast, the SDU synthesis resulted in multiple phases with many samples exhibiting crystalline phases including a combination of Na(UO 2 ) 4 O 2 (OH) 5 ·5H 2 O and Na 2 (UO2) 6 O 4 (OH) 6 ·8H 2 O with a Na 2 U 2 O 7 minor phase. A small fraction of the SDU samples were amorphous with no crystalline XRD peaks observed. Mass loss curves of the SDU samples revealed that the amorphous samples contained inclusions of similar crystalline phases compared to the crystalline materials. The uniformity of the MDU samples enabled highly reproducible measurements of δ 18 O values of the water vapor yielded for two dehydration events at 170 °C and 500 °C. In contrast, the multiphase composition of the SDU samples resulted in poor reproducibility in δ 18 O values. In conclusion, neither system revealed any correlation between the δ 18 O values of precipitation water, and the waters released during dehydration of the UOCs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Magnetic exchange interactions in the van der Waals layered antiferromagnet MnPSe 3

Two-dimensional van der Waals compounds with magnetic ions on a honeycomb lattice are hosts to a variety of exotic behavior. The magnetic interactions in one such compound, MnPSe 3 , are investigated with elastic and inelastic neutron scattering. Magnetic excitations are observed in the magnetically ordered regime and persist to temperatures well above the ordering temperature, T N =74K, consistent with low dimensional magnetic interactions. The inelastic neutron scattering results allow a model spin Hamiltonian to be presented that includes dominant intralayer interactions of J 1ab =0.45 meV, J 2ab =0.03 meV, J 3ab =0.19 meV, consistent with theoretical predictions. Furthermore, despite the quasi-2D behavior, appreciable interlayer interactions of J c =0.031(5) meV are required to model the data. No evidence for anisotropy in the form of a spin gap is observed in the data collected. The measurements on MnPSe 3 are contrasted with those on MnPS 3 and reveal a large increase in the interlayer exchange interaction in MnPSe 3 that may stabilize the similar ordering temperatures in the bulk compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ca Metal Batteries and Sn Anode Alloying: Resolving Misconceptions in Ca–Sn Alloy Formation

Ca metal anode suffers from surface passivation and struggles to effectively plate and strip in conventional Ca electrolytes, making the development of alloy anode for calcium metal battery essential. This work systematically and carefully evaluates the electrochemical formation and feasibility of the Sn anode and its possibility of alloying with Ca using a combination of cyclic voltammetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD), and synchrotron transmission X-ray microscopy (TXM). Electrochemical measurements and SEM/EDS analyses indicate apparent Ca alloy formation. However, detailed XRD and TXM characterization reveal substantial lithium-ion involvement when lithium metal is employed as the reference electrode, even in electrolytes with high Ca salt concentrations. These findings highlight a significant risk of misinterpretation: Although limited Ca–Sn alloying may occur, the faster kinetics of Li + can dominate the alloying process, leading to a Li-driven reactions at the Sn anode. In contrast, cells constructed with Ca metal as both reference and counter electrodes exhibit distinct redox features only during the initial cycles, followed by rapid cell failure. The high oxidation currents induce severe Ca passivation, occurring nearly concurrently with Sn dealloying. Overall, this study provides critical insight into the practical limitations and common experimental artifacts associated with Ca metal battery systems and underscores the necessity for rigorous cell design and cautious interpretation when evaluating alloy chemistry in multivalent Ca-based batteries.

36 MATERIALS SCIENCE↗

Synthesis and symmetry of perovskite oxynitride CaW(O,N) 3

Perovskite oxynitrides, in addition to being promising electrocatalysts and photoabsorbers, present an interesting case study in crystal symmetry. Full or partial ordering of the O and N anions affects global symmetry and influences material performance and functionality; however, anion ordering is challenging to detect experimentally. In this work, we synthesize a novel perovskite oxynitride CaW(O,N) 3 and characterize its crystal structure using both X-ray and neutron diffraction. Through co-refinement of the diffraction patterns with a range of literature and theory-derived model structures, we demonstrate that CaW(O,N) 3 adopts an orthorhombic Pnma average structure and exhibits octahedral distortion with evidence for preferred anion site occupancy. However, through comparison with a large, low-symmetry unit cell, we identify the presence of disorder that is not fully accounted for by the high-symmetry model. We compare CaW(O,N) 3 with SrW(O,N) 3 to demonstrate the broader presence of such disorder and identify contrasting features in the electronic structures. This work signifies an updated perspective on the inherent crystal symmetry present in perovskite oxynitrides.

36 MATERIALS SCIENCE↗