Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “differential inclusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Electro-Thermal Simulation Studies of SiC Junction Diodes Containing Screw Dislocations Under High Reverse-Bias Operation

The objective of this work was to conduct a modeling study of SiC P-N junction diodes operating under high reverse biased conditions. Analytical models and numerical simulation capabilities were to be developed for self-consistent electro-thermal analysis of the diode current-voltage (I-V) characteristics. Data from GRC indicate that screw dislocations are unavoidable in large area SiC devices, and lead to changes in the SiC diode electrical response characteristics under high field conditions. For example, device instability and failures linked to internal current filamentation have been observed. The physical origin of these processes is not well understood, and quantitative projections of the electrical behavior under high field and temperature conditions are lacking. Thermal calculations for SiC devices have not been reported in the literature either. So estimates or projections of peak device temperatures and power limitations do not exist. This numerical study and simulation analysis was aimed at resolving some of the above issues. The following tasks were successfully accomplished: (1) Development of physically based models using one- and two-dimensional drift-diffusion theory for the transport behavior and I-V characteristics; (2) One- and two-dimensional heat flow to account for internal device heating. This led to calculations of the internal temperature profiles, which in turn, were used to update the electrical transport parameters for a self-consistent analysis. The temperature profiles and the peak values were thus obtainable for a given device operating condition; (3) Inclusion of traps assumed to model the presence of internal screw dislocations running along the longitudinal direction; (4) Predictions of the operating characteristics with and without heating as a function of applied bias with and without traps. Both one and two-dimensional cases were implemented; (5) Assessment of device stability based on the operating characteristics. The presence of internal non-uniformities, particularly filamentary structures, was probed and demonstrated; (6) Cause and physical origins of filamentary behavior and unstable I-V characteristics were made transparent; (7) It was demonstrated that diodes containing defects would be more prone to thermal breakdown associated with the temperature dependent decrease in the thermal conductivity; and (8) Finally, negative differential resistance (S-shaped NDR) which can potential lead to device instability and filamentary behavior was shown to occur for diodes containing a line of defects such as could be associated with a screw dislocation line.

Joshi, R. P.↗
DOE OSTI2024

Light dilaton in rare meson decays and extraction of its CP property

Abstract The dilatonϕis a pseudo-Nambu-Goldstone boson associated with the spontaneous breaking of scale invariance in a nearly conformal theory, and couples to the trace of the stress-energy tensor. We analyze experimental constraints on a light dilaton with mass in the MeV–GeV range from rare meson decays. New model-independent inclusive bounds for theb→sϕtransition largely exclude the parameter space of a light dilaton that could explain the muong− 2 anomaly. Despite similarities between a dilaton and a Higgs-portal scalar, the dilaton-photon coupling is enhanced compared to the Higgs-portal scalar due to contributions from loops of the conformal sector. Consequently, the shortened lifetime of the dilaton relaxes bounds fromK→π+ invisible searches at the NA62 experiment and constraints from the Big Bang Nucleosynthesis. We utilize this fact to search for the dilaton signature at a lepton collider such as the ongoing Belle II experiment. Further, we demonstrate how to extract the CP property of the dilaton using the variation of the differential cross-section ofe + e − →e + e − ϕwith the azimuthal angle between the outgoing leptons.

Physics↗
DOE OSTI2024

Longitudinal analysis of host protein serum signatures of treatment and recovery in pulmonary tuberculosis

A better understanding of treatment progression and recovery in pulmonary tuberculosis (TB) infectious disease is crucial. This study analyzed longitudinal serum samples from pulmonary TB patients undergoing interventional treatment to identify surrogate markers for TB-related outcomes. Serum that was collected at baseline and 8, 17, 26, and 52 weeks from 30 TB patients experiencing durable cure were evaluated and compared using a sensitive LC-MS/MS proteomic platform for the detection and quantification of differential host protein signatures relative to timepoint. The global proteome signature was analyzed for statistical differences across the time course and between disease severity and treatment groups. A total of 676 proteins showed differential expression in the serum over these timepoints relative to baseline. Comparisons to understand serum protein dynamics at 8 weeks, treatment endpoints at 17 and 26 weeks, and post-treatment at 52 weeks were performed. The largest protein abundance changes were observed at 8 weeks as the initial effects of antibiotic treatment strongly impacted inflammatory and immune modulated responses. However, the largest number of proteome changes was observed at the end of treatment time points 17 and 26 weeks respectively. Post-treatment 52-week results showed an abatement of differential proteome signatures from end of treatment, though interestingly those proteins uniquely significant at post-treatment were almost exclusively downregulated. Patients were additionally stratified based upon disease severity and compared across all timepoints, identifying 461 discriminating proteome signatures. These proteome signatures collapsed into discrete expression profiles with distinct pathways across immune activation and signaling, hemostasis, and metabolism annotations. Insulin-like growth factor (IGF) and Integrin signaling maintained a severity signature through 52 weeks, implying an intrinsic disease severity signature well into the post-treatment timeframe. Previous proteome studies have primarily focused on the 8-week timepoint in relation to culture conversion status. While this study confirms previous observations, it also highlights some differences. The inclusion of additional end of treatment and post-treatment time points offers a more comprehensive assessment of treatment progression within the serum proteome. Examining the expression dynamics at these later time periods will help in the investigation of relapse patients and has provided indicative markers of response and recovery.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2012

Adhesive-Bonded Composite Joint Analysis with Delaminated Surface Ply Using Strain-Energy Release Rate

This paper presents an analytical model to determine the strain energy release rate due to an interlaminar crack of the surface ply in adhesively bonded composite joints subjected to axial tension. Single-lap shear-joint standard test specimen geometry with thick bondline is followed for model development. The field equations are formulated by using the first-order shear-deformation theory in laminated plates together with kinematics relations and force equilibrium conditions. The stress distributions for the adherends and adhesive are determined after the appropriate boundary and loading conditions are applied and the equations for the field displacements are solved. The system of second-order differential equations is solved to using the symbolic computation tool Maple 9.52 to provide displacements fields. The equivalent forces at the tip of the prescribed interlaminar crack are obtained based on interlaminar stress distributions. The strain energy release rate of the crack is then determined by using the crack closure method. Finite element analyses using the J integral as well as the crack closure method are performed to verify the developed analytical model. It has been shown that the results using the analytical method correlate well with the results from the finite element analyses. An attempt is made to predict the failure loads of the joints based on limited test data from the literature. The effectiveness of the inclusion of bondline thickness is justified when compared with the results obtained from the previous model in which a thin bondline and uniform adhesive stresses through the bondline thickness are assumed.

Chadegani, Alireza↗
NASA NTRS2021

Measurement of the Iron Spectrum in Cosmic Rays from 10 GeV/n to 2.0 TeV/n with the Calorimetric Electron Telescope on the International Space Station

The Calorimetric Electron Telescope (CALET), in operation on the International Space Station since 2015, collected a large sample of cosmic-ray iron over a wide energy interval. In this paper a measurement of the iron spectrum is presented in the range of kinetic energy per nucleon from 10GeV/n to 2.0 TeV/n allowing the inclusion of iron in the list of elements studied with unprecedented precision by space-borne instruments. The measurement is based on observations carried out from January 2016 to May 2020. The CALET instrument can identify individual nuclear species via a measurement of their electric charge with a dynamic range extending far beyond iron (up to atomic number Z = 40). The energy is measured by a homogeneous calorimeter with a total equivalent thickness of 1.2 proton interaction lengths preceded by a thin (3 radiation lengths) imaging section providing tracking and energy sampling. The analysis of the data and the detailed assessment of systematic uncertainties are described and results are compared with the findings of previous experiments. The observed differential spectrum is consistent within the errors with previous experiments. In the region from 50 GeV/n to 2 TeV/ n our present data are compatible with a single power law with spectral index−2.60±0.03.

O Adriani↗
DOE OSTI2020

Super-time-stepping schemes for parabolic equations with boundary conditions

In this work, we present a super-time-stepping scheme for numerically solving parabolic partial differential equations with Dirichlet boundary conditions (BC). Using the general Forward Euler scheme, one can show that by taking varying step sizes there is the potential of propagating the solution forward in time by a greater amount than with uniform step sizes, while maintaining the same order of accuracy. As shown in previous works, if one further requires that the scheme have the Convex Monotone Property (CMP), then there exists a scheme which results in linear, monotone stability of the solution. This monotone stability is highly desirable in many physical situations, such as thermal diffusion, where the physical system will not oscillate, but will behave monotonically. However, the schemes devised in previous works do not include situations that have a boundary condition, and the inclusion of boundary conditions will henceforth be our focus. It is shown that a particular Runge-Kutta-Gegenbauer class of schemes [5] will maintain the CMP even in the presence of Dirichlet BC.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Measurements of inclusive J/ψ production at midrapidity and forward rapidity in Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The measurements of the inclusive J/ψ yield at midrapidity (|y| < 0.9) and forward rapidity (2.5 < y < 4) in Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with the ALICE detector at the LHC are reported. The inclusive J/ψ production yields and nuclear modification factors, R AA , are measured as a function of the collision centrality, J/ψ transverse momentum (p T ), and rapidity. The J/ψ average transverse momentum and squared transverse momentum ($\langle$p T $\rangle$ and $\langle$$p^{2}_{T}$$\rangle$) are evaluated as a function of the centrality at midrapidity. Compared to the previous ALICE publications, here the entire Pb–Pb collisions dataset collected during the LHC Run 2 is used, which improves the precision of the measurements and extends the p T coverage. The p T -integrated R AA shows a hint of an increasing trend towards unity from semicentral to central collisions at midrapidity, while it is flat at forward rapidity. The p T -differential R AA shows a strong suppression at high p T with less suppression at low p T where it reaches a larger value at midrapidity compared to forward rapidity. The ratio of the p T -integrated yields of J/ψ to those of D 0 mesons is reported for the first time for the central and semicentral event classes at midrapidity. Model calculations implementing charmonium production via the coalescence of charm quarks and antiquarks during the fireball evolution (transport models) or in a statistical approach with thermal weights are in good agreement with the data at low p T . At higher p T , the data are well described by transport models and a model based on energy loss in the strongly-interacting medium produced in nuclear collisions at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1977

Early history of the moon: Implications of U-Th-Pb and Rb-Sr systematics

Anorthosite 60015 contains the lowest initial Sr-87/Sr-86 ratio yet reported for a lunar sample. The initial ratio is equal to that of the achondrite Angra dos Reis and slightly higher than the lowest measured Sr-87/Sr-86 ratio for an inclusion in the C3 carbonaceous chondrite Allende. The Pb-Pb ages of both Angra does Reis and Allende are 4.62 X 10 to the ninth power yr. Thus, the initial Sr/87/Sr-86 ratio found in lunar anorthosite 60015 strongly supports the hypothesis that the age of the Moon is about 4.65 b.y. The U-238/Pb-204 value estimated for the source of the excess lead in "orange soil" 74220 is approximately 35 and lower than the values estimated for the sources of KREEP (600-1000), high-K (300-600), and low-K (100-300) basalts. From these and other physical, chemical and petrographic results it was hypothesized that (1) the moon formed approximately 4.65 b.y. ago; (2) a global-scale gravitational differentiation occurred at the beginning of lunar history; and (3) the differentiation resulted in a radical chemical and mineralogical zoning in which the U-238/Pb-204 ratios increased toward the surface, with the exception of the low U-238/Pb-204 surficial anorthositic layer which "floated" at the beginning of the differentiation relative to the denser pyroxene-rich material.

Tatsumoto, M.↗
DOE OSTI2020

Inclusive search for highly boosted Higgs bosons decaying to bottom quark-antiquark pairs in proton-proton collisions at $\sqrt{s} =$ 13 TeV

A search for standard model Higgs bosons (H) produced with transverse momentum (p$_{T}$) greater than 450 GeV and decaying to bottom quark-antiquark pairs ($ \mathrm{b}\overline{\mathrm{b}} $) is performed using proton-proton collision data collected by the CMS experiment at the LHC at $ \sqrt{s} $ = 13 TeV. The data sample corresponds to an integrated luminosity of 137 fb$^{−1}$. The search is inclusive in the Higgs boson production mode. Highly Lorentz-boosted Higgs bosons decaying to $ \mathrm{b}\overline{\mathrm{b}} $ are reconstructed as single large-radius jets, and are identified using jet substructure and a dedicated b tagging technique based on a deep neural network. The method is validated with Z →$ \mathrm{b}\overline{\mathrm{b}} $ decays. For a Higgs boson mass of 125 GeV, an excess of events above the background assuming no Higgs boson production is observed with a local significance of 2.5 standard deviations (σ), while the expectation is 0.7. The corresponding signal strength and local significance with respect to the standard model expectation are μ$_{H}$ = 3.7 ± 1.2(stat)$ {}_{-0.7}^{+0.8} $(syst)$ {}_{-0.5}^{+0.8} $(theo) and 1.9 σ. Additionally, an unfolded differential cross section as a function of Higgs boson p$_{T}$ for the gluon fusion production mode is presented, assuming the other production modes occur at the expected rates.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Measurement of simplified template cross sections of the Higgs boson produced in association with W or Z bosons in the H → b b ¯ decay channel in proton-proton collisions at s = 13 TeV

Differential cross sections are measured for the standard model Higgs boson produced in association with vector bosons (W, Z) and decaying to a pair of b quarks. Measurements are performed within the framework of the simplified template cross sections. The analysis relies on the leptonic decays of the W and Z bosons, resulting in final states with 0, 1, or 2 electrons or muons. The Higgs boson candidates are either reconstructed from pairs of resolved b-tagged jets, or from single large-radius jets containing the particles arising from two b quarks. Proton-proton collision data at $\sqrt{s}$ =13 TeV, collected by the CMS experiment in 2016–2018 and corresponding to a total integrated luminosity of 138 fb -1 , are analyzed. The inclusive signal strength, defined as the product of the observed production cross section and branching fraction relative to the standard model expectation, combining all analysis categories, is found to be μ = $1.15^{+0.22}_{-0.20}$. This corresponds to an observed (expected) significance of 6.3 (5.6) standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Centrality dependence of J /ψ and ψ (2S) production and nuclear modification in p-Pb collisions at \( \sqrt{s_{\mathrm{NN}}} \) = 8 . 16 TeV

The inclusive production of the J/ ψ and ψ (2S) charmonium states is studied as a function of centrality in p-Pb collisions at a centre-of-mass energy per nucleon pair \( \sqrt{s_{\mathrm{NN}}} \) = 8 . 16 TeV at the LHC. The measurement is performed in the dimuon decay channel with the ALICE apparatus in the centre-of-mass rapidity intervals – 4 . 46 < y cms < – 2 . 96 (Pb-going direction) and 2 . 03 < y cms < 3 . 53 (p-going direction), down to zero transverse momentum ( p T ). The J/ ψ and ψ (2S) production cross sections are evaluated as a function of the collision centrality, estimated through the energy deposited in the zero degree calorimeter located in the Pb-going direction. The p T -differential J/ ψ production cross section is measured at backward and forward rapidity for several centrality classes, together with the corresponding average \( \left\langle {p}_{\mathrm{T}}\right\rangle \) and \( \left\langle {p}_{\mathrm{T}}^2\right\rangle \) values. The nuclear effects affecting the production of both charmonium states are studied using the nuclear modification factor. In the p-going direction, a suppression of the production of both charmonium states is observed, which seems to increase from peripheral to central collisions. In the Pb-going direction, however, the centrality dependence is different for the two states: the nuclear modification factor of the J/ ψ increases from below unity in peripheral collisions to above unity in central collisions, while for the ψ (2S) it stays below or consistent with unity for all centralities with no significant centrality dependence. The results are compared with measurements in p-Pb collisions at \( \sqrt{s_{\mathrm{NN}}} \) = 5 . 02 TeV and no significant dependence on the energy of the collision is observed. Finally, the results are compared with theoretical models implementing various nuclear matter effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2007

Petrology and Geochemistry of New Ureilites and Ureilite Genesis

Ureilites are C-bearing, basalt-depleted olivine+pyroxene achondrites from a differentiated asteroid. The group is heterogeneous, exhibiting ranges in O isotopic composition, Fe/Mg, Fe/Mn, pyx/ol, siderophile and lithophile trace element content, and C content and isotopic composition [1]. Some of these characteristics are nebular in origin; others were strongly overprinted by asteroidal igneous processes. The consensus view is that most ureilites are melt-residues, but some are partial cumulates or have interacted with a melt [1,2]. An "unroofing" event occurred while the parent asteroid was hot that froze in mineral core com-positions and resulted in FeO reduction at olivine grain margins. We have studied several new ureilites, but will focus here on two anomalous stones; LAR 04315 and NWA 1241. LAR 04315 is texturally unusual. It contains olivine with angular subdomains, and low-Ca pyroxene riddled with wormy inclusions of metal+troilite, graphite, and possibly other phases, and irregular inclusions of high-Ca pyroxene. Reduction occurred along olivine grain margins and internal fractures, but not along subdomain boundaries. Although texturally odd, LAR 04351 is a typical ureilite in mineral and bulk composition. The olivine is Fo80.8 and falls on the ureilite Fe/Mn-Fe/Mg trend. Its olivine composition falls within the range of the majority of ureilites, and it is typical of these ureilites in bulk rock lithophile and siderophile element contents.

Mittlefehldt, David W.↗
NASA NTRS1979

On the effects of higher convection modes on the thermal evolution of small planetary bodies

The effects of higher modes of convection on the thermal evolution of a small planetary body is investigated. Three sets of models are designed to specify an initially cold and differentiated, an initially hot and differentiated, and an initially cold and undifferentiated Moon-type body. The strong temperature dependence of viscosity enhances the thickening of lithosphere so that a lithosphere of about 400 km thickness is developed within the first billion years of the evolution of a Moon-type body. The thermally isolating effect of such a lithosphere hampers the heat flux out of the body and increases the temperature of the interior, causing the solid-state convection to occur with high velocity so that even the lower modes of convection can maintain an adiabatic temperature gradient there. It is demonstrated that the effect of solid-state convection on the thermal evolution of the models may be adequately determined by a combination of convection modes up to the third or the fourth order harmonic. The inclusion of higher modes does not affect the results significantly.

Arkani-Hamed, J.↗
NASA NTRS1990

New parameter-free polarization potentials in low-energy positron collisions

The polarization potential plays a decisive role in shaping up the cross sections in low energy positron collisions with atoms and molecules. However, its inclusion without involving any adjustable parameter, is still a challenge. Various other techniques employed so far for positron collisions are summarized, and a new, nonadjustable and very simple form of the polarization potential for positron-atom (molecule) collisions below the threshold of positronium formation is discussed. This new recently proposed potential is based on the correlation energy of a single positron in a homogeneous electron gas. The correlation energy was calculated by solving the Schrodinger equation of the positron-electron system and fitted to an analytical form in various ranges of the density parameter. In the outside region, the correlation energy is joined smoothly with the correct asymptotic form. This new positron correlation polarization (PCOP) potential was tested on several atomic and molecular targets such as the Ar, CO, and CH4. The results on the total and differential cross sections on these targets are shown along with the experimental data where available.

Jain, Ashok↗
DOE OSTI2022

Bulk Spray and Individual Plume Characterization of LPG and Iso-Octane Sprays at Engine-Like Conditions

This study presents experimental and numerical examination of directly injected (DI) propane and iso-octane, surrogates for liquified petroleum gas (LPG) and gasoline, respectively, at various engine like conditions with the overall objective to establish the baseline with regards to fuel delivery required for future high efficiency DI-LPG fueled heavy-duty engines. Sprays for both iso-octane and propane were characterized and the results from the optical diagnostic techniques including high-speed Schlieren and planar Mie scattering imaging were applied to differentiate the liquid-phase regions and the bulk spray phenomenon from single plume behaviors. The experimental results, coupled with high-fidelity internal nozzle-flow simulations were then used to define best practices in CFD Lagrangian spray models. Optical imaging revealed that unlike iso-octane, propane’s spray propagation was fed by its flash boiling, spray collapse, and high degree of vaporization, resulting in a direct proportionality of propane’s penetration length to temperature. These unique features of propane and its variation from iso-octane’s spray pattern, contributed to its classification as an unconventional spray. Appropriate corrections to the injection and breakup models were developed to reproduce the under-expanded jet dynamics and to mimic the flash boiling-driven spray development observed with propane sprays. The simulation results were found to be sensitive to cone and inclusion angles of the blob injector. The current work represents a first assessment of the capability of the commonly available models for engine-spray simulations and highlights the fact that, despite the reasonable agreement obtained in the fuel vapor morphology, the representation of the liquid phase lacks accuracy and requires further model development.

02 PETROLEUM↗
DOE OSTI2022

Design of a neutral thermal scattering (NeTS) module for hydrogen in light water

The accurate representation of thermal scattering law (TSL) data is integral to the design and characterization of many modern nuclear systems, particularly those using light water as a moderator/coolant. As a material-dependent distribution over energy-momentum phase space, the TSL may exhibit a variety of unique and relevant conditional (e.g., temperature, pressure) and compositional (e.g., porosity, stoichiometry, radiation damage) dependencies. Currently, there are various approaches to incorporate temperature dependence, which is especially important in coupled neutronic-thermal hydraulic simulations. In each approach, there is an inherent tradeoff between memory consumption and accuracy. Some techniques require tens to hundreds of MBs or more, while others fail to reproduce the underlying data to within 10% error over the considered input domain, despite having a reduced storage burden. This work aims to address both sides of the tradeoff simultaneously by implementing a novel deep learning (DL) approach to TSL representation. The neural thermal scattering (NeTS) concept, which is amenable to an arbitrary number of dependencies, is demonstrated via the inclusion of temperature dependence into a highly compact, highly accurate functional form of the multi- variate TSL (i.e., S(α, β, T)) for hydrogen in light water. Resulting storage requirements are on the order of 100 kB, and median and maximum percent deviations are on the order of 0.1% and 1%, respectively. These measures represent a step improvement over previous techniques. Notably, the developed neural network and feature methodology build on those employed in prior work on beryllium oxide. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Inclusive J /$\psi$ production at midrapidity in pp collisions at $\sqrt{s}$ = 13 TeV

We report on the inclusive J/ψ production cross section measured at the CERN Large Hadron Collider in proton–proton collisions at a center-of-mass energy $\sqrt{s}$ = 13 TeV. The J/ψ mesons are reconstructed in the e + e - decay channel and the measurements are performed at midrapidity (|y|<0.9) in the transverse-momentum interval 0 < p T < 40 GeV/c, using a minimum-bias data sample corresponding to an integrated luminosity L int =32.2 nb -1 and an Electromagnetic Calorimeter triggered data sample with L int =8.3 pb -1 . The p T -integrated J/ψ production cross section at midrapidity, computed using the minimum-bias data sample, is dσ/dy| y = 0 = 8.97±0.24 (stat)±0.48 (syst)±0.15 (lumi) μb. An approximate logarithmic dependence with the collision energy is suggested by these results and available world data, in agreement with model predictions. The integrated and p T -differential measurements are compared with measurements in pp collisions at lower energies and with several recent phenomenological calculations based on the non-relativistic QCD and Color Evaporation models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗