Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Some experiences using wind-tunnel models in active control studies

A status report and review of wind tunnel model experimental techniques that have been developed to study and validate the use of active control technology for the minimization of aeroelastic response are presented. Modeling techniques, test procedures, and data analysis methods used in three model studies are described. The studies include flutter mode suppression on a delta-wing model, flutter mode suppression and ride quality control on a 1/30-size model of the B-52 CCV airplane, and an active lift distribution control system on a 1/22 size C-5A model.

Doggett, R. V., Jr.↗

Theoretical study of aerodynamic characteristics of wings having vortex flow

The aerodynamic characteristics of slender wings having separation induced vortex flows are investigated by employing three different computer codes--free vortex sheet, quasi vortex lattice, and suction analogy methods. Their capabilities and limitations are examined, and modifications are discussed. Flat wings of different configurations: arrow, delta, and diamond shapes, as well as cambered delta wings, are studied. The effect of notch ratio on the load distributions and the longitudinal characteristics of a family of arrow and diamond wings is explored. The sectional lift coefficients and the accumulated span loadings are determined for an arrow wing and are seen to be unusual in comparison with the attached flow results. The theoretically predicted results are compared with the existing experimental values.

Reddy, C. S.↗

Shuttle glow emissions due to radiative relaxation of highly vibrationally excited NO molecules produced by surface reflection

A new mechanism is proposed for the Space Shuttle glow, which is due to the radiative relaxation of ambient nitric-oxide molecules that are excited to very high vibrational levels by collisions with the Shuttle surface. Many of the particles colliding with the Shuttle surface at a very high speed (about 8 km/sec) would bounce off, exciting vibrational and rotational motions of molecules up to the level of vibrational quantum number v not greater than 35. Radiative transfer from these high levels should cause emissions in the spectrum range from infrared (IR) to visible red depending upon the transition paths. A perturbation method is used to calculate the transition probability and the emission intensity for the transitions of Delta-v not greater than 4. The result indicates that the Delta-v not greater than 4 transitions from high vibrational levels dominates the other transitions; the Delta-v = 4 transitions generally occur at the IR range.

Shimazaki, T.↗

Severe winds in the DFW microburst measured from two aircraft

Advanced analytical methods are applied to the digital flight data and Air Traffic Control radar records from two airliners, Delta flight 191 and American flight 539, that penetrated a microburst at the Dallas/Ft. Worth airport on August 2, 1985. The results for Delta 191 (which crashed) show that the aircraft encountered a strong downburst followed by a strong outflow accompanied by large and rapid changes in the vertical wind. The rapid changes in the vertical wind detected near the ground are attributed to vortex-induced turbulence. The next following aircraft, American 539, made a go-around 110 sec after Delta 191 and traversed the microburst at an altitude of about 2500 ft above the ground. The measured winds during this go-around indicate a broad pattern of downflow in the microburst, with regions of upflow at the extreme edges. The combined results indicate a microburst that was increasing in size with vortex-induced turbulence embedded in a strong outflow near the ground. These wind measurements provide a realistic description of the microburst wind environment that can be used in simulator studies and pilot training, and provide a standard of comparison for ongoing experiments and modeling of microbursts involving vortex rings.

Wingrove, R. C.↗

Calculations of the flow properties of a confined diffusion flame

A finite element algorithm for the computation of confined, axisymmetric, turbulent diffusion flames is developed. The mean mixture properties were obtained by three methods based on diffusion flame concept: without using a probability density function (PDF), with a double-delta PDF, and with a beta PDF. A comparison is made for the combustion models, and the effect of turbulence on combustion are discussed.

Kim, Yongmo↗

Analysis of lightning field changes produced by Florida thunderstorms

A new method is introduced for inferring the charges deposited in a lightning flash. Lightning-caused field changes (delta E's) are described by a more general volume charge distribution than is defined on a large cartesian grid system centered above the measuring networks. It is shown that a linear system of equations can be used to relate delta E's at the ground to the values of charge on this grid. It is possible to apply more general physical constraints to the charge solutions, and it is possible to access the information content of the delta E data. Computer-simulated delta E inversions show that the location and symmetry of the charge retrievals are usually consistent with the known test sources.

Koshak, William John↗

A powered lift experiment for CFD validation

The transitional flight characteristics of a geometrically simplified STOVL aircraft configuration were measured in the NASA Ames 7- by 10-Foot Wind Tunnel. The experiment is the first in a sequence of tests designed to provide detailed data for evaluating the capability of computational fluid dynamics methods to predict the important flow parameters for powered lift. The model consists of a 60-deg delta wing planform with two circular high-pressure air jets located in a blended fuselage. The measured flows have a maximum freestream Mach number of 0.2. The flow is sonic and at ambient temperature in both jets. The data presented include forces and moments measured using an internal balance, pressures measured at the 281 surface pressure ports, and jet pressures and temperatures. Measurements of the flow are also made in the tunnel test section upstream and downstream of the model and at the jet exists to provide boundary conditions for the planned computations.

Roth, Karlin R.↗

Transitional flight characteristics of a geometrically simplified STOVL model

The transitional flight characteristics of a geometrically simplified Short Take-Off Vertical Landing (STOVL) aircraft configuration were measured in the NASA Ames 7- by 10-Foot Wind Tunnel. The experiment was designed to provide detailed data for evaluating the capability of computational fluid dynamics methods to predict the important powered lift flow parameters. The model consists of a 60 deg cropped delta wing planform; a blended fuselage; and tandem, circular, high pressure air jets that exit perpendicular to the flat lower surface. Freestream Mach number is limited to a maximum 0.2. Model angle of attack ranges from -10 deg to +20 deg. The nozzle pressure ratios of both jets are varied between 1 and 3, and the jet exit temperatures are maintained at near ambient conditions. Detailed surface pressure measurements show that suction pressure peaks located on the upper surface of the wing during conventional wingborne flight for angles of attack greater than 5 deg move to the wing lower surface at angles of attack less than 0 deg. A reduction in these suction pressure peaks is observed when the lift jets are operating. With sonic jet exit conditions, a freestream Mach number of 0.14, and 0 deg angle of attack, the jet-induced suckdown is equivalent to a 3.7 deg reduction in angle of attack. Schlieren, laser light sheet flow visualization and total pressure measurements in the jet plumes provide a description of the three-dimensional jet efflux flowfield.

Roth, Karlin R.↗

Summary and Statistical Analysis of the First AIAA Sonic Boom Prediction Workshop

A summary is provided for the First AIAA Sonic Boom Workshop held 11 January 2014 in conjunction with AIAA SciTech 2014. Near-field pressure signatures extracted from computational fluid dynamics solutions are gathered from nineteen participants representing three countries for the two required cases, an axisymmetric body and simple delta wing body. Structured multiblock, unstructured mixed-element, unstructured tetrahedral, overset, and Cartesian cut-cell methods are used by the participants. Participants provided signatures computed on participant generated and solution adapted grids. Signatures are also provided for a series of uniformly refined workshop provided grids. These submissions are propagated to the ground and loudness measures are computed. This allows the grid convergence of a loudness measure and a validation metric (dfference norm between computed and wind tunnel measured near-field signatures) to be studied for the first time. Statistical analysis is also presented for these measures. An optional configuration includes fuselage, wing, tail, flow-through nacelles, and blade sting. This full configuration exhibits more variation in eleven submissions than the sixty submissions provided for each required case. Recommendations are provided for potential improvements to the analysis methods and a possible subsequent workshop.

Park, Michael A.↗

Interactions Between Oxygen and Nitrogen: O[Single Bond]N, O[Single Bond]N (sub 2), and O (sub 2)[Single Bond]N (sub 2)

Potential energy curves for 0-N interactions corresponding to the X (sup 2) II (sub t/2), X (sup 2) II (sub 3/2), A (sup 2) Eta (sup plus), B (sup 2) II, C (sup 2) II, D (sup 2) Eta (sup plus), E (sup 2) Eta (sup plus), and B prime (sup 2 delta) states of nitric oxide have been calculated from spectroscopic data by the Rydberg- Klein-Rees method. Curves for the (sup 4) II, (sup 2) Eta, (sup 4) Eta, (sup 6) Eta, and (sup 6) II states have been obtained from limited spectroscopic results and from relations derived from approximate quantum-mechanical calculations. Two semi-independent calculations have been made, and are in good agreement with each other. The quantum-mechanical relations also lead to approximate curves for the O[Single Bond]N, and O[Single Bond]N (sub 2) interactions over a limited range. The O (sub 2)[Single Bond]N (sub 2) interaction is consistent with one valid at larger separation distances which has been derived from high-temperature gas viscosity data.

Vanderslice, Joseph T.↗

Application of vortex embedding to aircraft flows

A combined Eulerian/Lagrangian 'vortex embedding' method was applied to two cases. The first case involved compressible flow over a realistic fighter aircraft (X-29 fighter) at low angle of attack, for both subsonic and transonic speeds, with shock. Good agreement was obtained for computed wing surface pressures when compared to flight test data. The second case involved incompressible flow over a delta wing with round leading edges at moderate angles of attack. Strong, concentrated vortices were shown to be shed from the leading edge. The vortex embedding method appears to be an efficient solution procedure for cases where well-defined vortex sheets are shed from surfaces.

Steinhoff, John↗

Numerical computation of multishocked, three-dimensional supersonic flow fields with real gas effects.

A computational procedure is presented which is capable of determining the supersonic flow field surrounding three-dimensional wing-body configurations such as a delta-wing space shuttle. The governing equations in conservation-law form are solved by a finite difference method using a second-order noncentered algorithm between the body and the outermost shock wave, which is treated as a sharp discontinuity. Secondary shocks which form between these boundaries are captured automatically, and the intersection of these shocks with the bow shock posed no difficulty. Resulting flow fields about typical blunt nose shuttle-like configurations at angle of attack are presented. The differences between perfect and real gas effects for high Mach number flows are shown.

Kutler, P.↗

Variational description of the positive column with two-stem ionization

The ionization balance in diffusion dominated discharges which depends on both one and two step ionization processes is considered. The Spenke diffusion equation (D sq delta n + neutrino n + sq kn =0) describing such conditions is solved by the Rayleigh-Ritz variational method. Simple analytic approximations to the density profile, and the similarity relation between neutrino,k,D and the discharge dimensions, are derived for planar and cylindrical geometry, and compared with exact computations for certain limiting cases.

Crawford, F. W.↗

Dual methods and approximation concepts in structural synthesis

Approximation concepts and dual method algorithms are combined to create a method for minimum weight design of structural systems. Approximation concepts convert the basic mathematical programming statement of the structural synthesis problem into a sequence of explicit primal problems of separable form. These problems are solved by constructing explicit dual functions, which are maximized subject to nonnegativity constraints on the dual variables. It is shown that the joining together of approximation concepts and dual methods can be viewed as a generalized optimality criteria approach. The dual method is successfully extended to deal with pure discrete and mixed continuous-discrete design variable problems. The power of the method presented is illustrated with numerical results for example problems, including a metallic swept wing and a thin delta wing with fiber composite skins.

Fleury, C.↗

High-frequency measurements of multilayer ceramic capacitors

A resonant coaxial transmission line, short circuited at one end and open circuited at the other, whose fundamental resonant frequency and Q factor are known, is perturbed with a test capacitor connected either in series at the shorted end of the line, or in shunt at the open end. Measuring the Q factor of the system with the delta f technique yields the effective series resistance, capacitance, and the Q factor of the test specimen. This method of measurement has the advantage that there are no adjustable elements to alter circuit conditions in an unprescribed way, the only variable is the frequency which can be measured with an uncertainty of less than 1 ppm, the loss of the line as a function of frequency is quite predictable, and the Q factor of the line can be made sufficiently high to support accurate measurements of low loss capacitors.

Lafferty, R. E.↗

Subsonic steady and unsteady aerodynamic loads on missiles and aircraft

Steady lifting flows over highly swept delta wings at large incidence were studied. After an exhaustive literature review, development of a vortex-lattice method was attempted. To demonstrate the feasibility of using such a method, an existing code was modified. A system of vortex lines to simulate the leading-edge wake was added. The coefficients predicted by the modified code were in good agreement with experimental data.

Source record↗

Communications and control for electric power systems

A long-term strategy for the integration of new control technologies for power generation and delivery is proposed: the industry would benefit from an evolutionary approach that would adapt to its needs future technologies as well as those that it has so far not heeded. The integrated operation of the entire system, including the distribution system, was proposed as a future goal. The AbNET communication protocols are reviewed, and additions that were made in 1991 are described. In the original network, traffic was controlled by polling at the master station, located at the substation, and routed by a flooding algorithm. In a revised version, the polling and flooding are modified. The question of interfacing low-energy measurement transducers or instrument transformers is considered. There is presently little or no agreement on what the output of optical current transducers (CT's) should be. Appendices deal with the calibration of current transducers; with Delta modulation, a simple means of serially encoding the output of an OCT; and with noise shaping, a method of digital signal processing that trades off the number of bits in a digital sample for a higher number of samples.

Kirkham, H.↗

Correlated states of a quantum oscillator acted by short pulses

Correlated squeezed states for a quantum oscillator are constructed based on the method of quantum integrals of motion. The quantum oscillator is acted upon by short duration pulses. Three delta-kickings of frequency are used to model the pulses' dependence upon the time aspects of the frequency of the oscillator. Additionally, the correlation coefficient and quantum variances of operations of coordinates and momenta are written in explicit form.

Manko, O. V.↗