Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “degradable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Low temperature recovery of OFF-state stress induced degradation of AlGaN/GaN high electron mobility transistors

Thermal annealing is a widely used strategy to enhance semiconductor device performance. However, the process is complex for multi-material multi-layered semiconductor devices, where thermoelastic stresses from lattice constant and thermal expansion coefficient mismatch may create more defects than those annealed. We propose an alternate low temperature annealing technique, which utilizes the electron wind force (EWF) induced by small duty cycle high density pulsed current. To demonstrate its effectiveness, we intentionally degrade AlGaN/GaN high electron mobility transistors (HEMTs) with accelerated OFF-state stressing to increase ON-resistance ∼182.08% and reduce drain saturation current ∼85.82% of pristine condition at a gate voltage of 0 V. We then performed the EWF annealing to recover the corresponding values back to ∼122.21% and ∼93.10%, respectively. The peak transconductance, degraded to ∼76.58% of pristine at the drain voltage of 3 V, was also recovered back to ∼92.38%. This recovery of previously degraded transport properties is attributed to approximately 80% recovery of carrier mobility, which occurs during EWF annealing. We performed synchrotron differential aperture x-ray microscopy measurements to correlate these annealing effects with the lattice structural changes. We found a reduction of lattice plane spacing of (001) planes and stress within the GaN layer under the gate region after EWF annealing, suggesting a corresponding decrease in defect density. Application of this low-temperature annealing technique for in-operando recovery of degraded electronic devices is discussed.

Physics↗

TEM turbulence in simulation and experiment in quasisymmetric and degraded-symmetry configurations of the HSX stellarator

The Helically Symmetric Experiment (HSX) has demonstrated reduced neoclassical transport and flow damping with quasisymmetry, but the difference of turbulent transport between quasisymmetric and degraded-symmetry configurations has not been definitively assessed. Profile analysis presented here shows that anomalous transport at the mid-radius is larger with degraded quasisymmetry when temperature and density profiles are matched. An initial comparison (${T_\mathrm{i}/T_\mathrm{e}} = 1$) between the quasisymmetric and degraded symmetry configurations finds that trapped-electron mode (TEM) turbulence can support larger heat fluxes in the degraded symmetry configuration despite smaller linear growth rates. However, further simulations at the experimental temperature ratio ($T_\mathrm{i}/T_\mathrm{e} = 0.2$) do not reproduce this effect. Experimental measurements of heat transport and density fluctuation amplitude are compared to nonlinear gyrokinetic simulations at the experimental temperature ratio. The heat flux and density fluctuation amplitude in simulation reproduce a substantial dependence on the density gradient, and the simulated heat flux matches measurements within experimental uncertainties, indicating that TEM turbulence is responsible for the anomalous transport at the steep density gradient in HSX.

HSX↗

Discovery and adaptation of microbes that degrade oxidized low-density polyethylene films

There is a growing interest in developing a methodology for effectively cleaving carbon–carbon (C–C) bonds in polymer backbones through bioconversion processes that utilize microorganisms and their enzymes. This upsurge of interest is driven by the goal of achieving a circular economy. Polyolefin post-consumer plastics are a substantial source of carbon, but the recycling potential is severely limited. Upcycling routes are needed for converting polyolefin post-consumer plastics into value-added products while concurrently mitigating adverse environmental effects. These materials contain carbon-based chemicals that can, in principle, serve as the feedstock for microbial metabolism. Some microbes have been reported to grow on polyolefin plastics, but the rate of biodegradation is insufficient for industrial processes. In this study, low-density polyethylene (LDPE) films were subjected to two mild ozone-based oxidation treatments, which facilitated biodegradation. The degree of oxidation was determined by Fourier transform infrared spectroscopy via analysis of the carbonyl index (1,710/1,460 cm −1 ), which ranged from 0.3 to 2.0, and also via analysis of the carboxylic acid content. Following oxidation of the films, studies were conducted to investigate the ability of a panel of polyvinyl alcohol-degrading microbes to degrade the oxidized films. A defined minimal medium was used to cultivate and assess microbial growth on the oxidized films. Following 45 days of cultivation, the most effective strains were further cultivated up to three additional generations on the oxidized film substrates to improve their ability to degrade the oxidized LDPE films. After these enrichments, we identified a strain from the third generation of Pseudomonas sp. Rh926 that exhibited significant cell growth and reduced the oxidized LDPE film mass by 25% in 30 days, demonstrating an enhanced capacity for degrading the oxidized LDPE films.

Adaptation↗

Phosphorolytic degradation of leaf starch via plastidic α-glucan phosphorylase leads to optimized plant growth and water use efficiency over the diel phases of Crassulacean acid metabolism

In plants with Crassulacean acid metabolism (CAM), it has been proposed that the requirement for nocturnal provision of phosphoenolpyruvate as a substrate for CO 2 uptake has resulted in a re-routing of chloroplastic starch degradation from the amylolytic route to the phosphorolytic route. To test this hypothesis, we generated and characterized four independent RNAi lines of the obligate CAM species Kalanchoë fedtschenkoi with a >10-fold reduction in transcript abundance of plastidic α-glucan phosphorylase (PHS1). The rPHS1 lines showed diminished nocturnal starch degradation, reduced dark CO 2 uptake, a reduction in diel water use efficiency (WUE), and an overall reduction in growth. A re-routing of starch degradation via the hydrolytic/amylolytic pathway was indicated by hyperaccumulation of maltose in all rPHS1 lines. Further examination indicated that whilst operation of the core circadian clock was not compromised, plasticity in modulating net dark CO 2 uptake in response to changing photoperiods was curtailed. The data show that phosphorolytic starch degradation is critical for efficient operation of the CAM cycle and for optimizing WUE. This finding has clear relevance for ongoing efforts to engineer CAM into non-CAM species as a means of boosting crop WUE for a warmer, drier future.

59 BASIC BIOLOGICAL SCIENCES↗

Numerical Validation of an Algorithm for Combined Soiling and Degradation Analysis of Photovoltaic Systems

We describe and demonstrate an open-source algorithm for simultaneously quantifying degradation and soiling of photovoltaic (PV) systems from energy-production time series data. The new analysis is based on year-on-year degradation rate analysis combined with stochastic rate and recovery soiling analysis. The algorithm is designed to fit into the workflow provided by RdTools, a Python module maintained by NREL and collaboratively developed with the community, which provides a framework and functions for degradation and loss-factor analysis of PV field data. We demonstrate the method on numerically simulated PV data sets and show that it reduces the root-mean-square error of the P50 degradation rate estimate when soiling is present.

14 SOLAR ENERGY↗

Assessing Machine Learning as a Tool to Explain Variance in Deployed Photovoltaic (PV) System Degradation

Degradation remains a large uncertainty in forecasting production for PV plants, creating significant risk for developers and financiers. This study aims to quantify the distribution and drivers of degradation across 10,000 PV systems deployed for distributed or utility generation by training a machine learning model to predict year-over-year degradation rates from metadata characteristics. A combination of K-Means clustering and random forest regressor were found to associate multiple metadata features as potential drivers of degradation, including module characteristics, system design, and climate features. From this, it is inferred that if machine learning is able to find complex patterns between metadata features and system performance loss, such methods can be employed to help developers and financiers make data-informed decisions when estimating long-term energy production forecasts in financial models.

Dunn, Jimmy C.↗

Unravelling electro-chemo-mechanical interplay in layered oxide cathode degradation in solid-state batteries

Solid-state batteries (SSBs) hold notable promise for advancing energy storage technologies. However, their commercial viability is limited by the poor cycle stability and complex degradation mechanism. This study underscores the pivotal role of electro-chemo-mechanical interactions in driving the failure of SSBs. Leveraging advanced x-ray imaging and spectroscopy techniques, we analyzed LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes from cycled Li x In||Li 6 PS 5 Cl (LPSC)||NMC811 SSBs, uncovering the interplay between microstructure, chemical heterogeneity, mechanical characteristics, and electrochemical performance. Our results show that revealing electro-chemo-mechanical interactions is essential to develop strategies to suppress the degradation of SSBs. Particularly, we revisit a LiNbO 3 (LNO) coating layer to mitigate electrochemical degradation. The LNO@NMC811 cathode retains 116 milliampere-hours per gram after 200 cycles, showing excellent stability, while the uncoated NMC811 cathode keeps degrading over time, with suppressed chemical heterogeneity and mechanical failure. This work highlights the importance of synergizing advanced material design with coating techniques, ensuring uniform lithium flux and improving mechanical properties to achieve stable, high-performance SSBs.

Zheng, Xueli [SLAC National Accelerator Laboratory↗

Unrecoverable lattice rotation governs structural degradation of single-crystalline cathodes

Transitioning from polycrystalline to single-crystalline nickel-rich cathodes has garnered considerable attention in both academia and industry, driven by advantages of high tap density and enhanced mechanical properties. However, cathodes with high nickel content (>70%) suffer from substantial capacity degradation, which poses a challenge to their commercial viability. Here, leveraging multiscale spatial resolution diffraction and imaging techniques, we observe that lattice rotations occur universally in single-crystalline cathodes and play a pivotal role in the structure degradation. These lattice rotations prove unrecoverable and govern the accumulation of adverse lattice distortions over repeated cycles, contributing to structural and mechanical degradation and fast capacity fade. These findings bridge the previous knowledge gap that exists in the mechanistic link between fast performance failure and atomic-scale structure degradation.

36 MATERIALS SCIENCE↗

Trehalose Degradation by Cellvibrio japonicus Exhibits No Functional Redundancy and Is Solely Dependent on the Tre37A Enzyme

The α-diglucoside trehalose has historically been known as a component of the bacterial stress response, though it more recently has been studied for its relevance in human gut health and biotechnology development. The utilization of trehalose as a nutrient source by bacteria relies on carbohydrate-active enzymes, specifically those of the glycoside hydrolase family 37 (GH37), to degrade the disaccharide into substituent glucose moieties for entry into metabolism. Environmental bacteria using oligosaccharides for nutrients often possess multiple carbohydrate-active enzymes predicted to have the same biochemical activity and therefore are thought to be functionally redundant. In this study, we characterized trehalose degradation by the biotechnologically important saprophytic bacterium Cellvibrio japonicus This bacterium possesses two predicted α-α-trehalase genes, tre37A and tre37B, and our investigation using mutational analysis found that only the former is essential for trehalose utilization by C. japonicus Heterologous expression experiments found that only the expression of the C. japonicus tre37A gene in an Escherichia coli treA mutant strain allowed for full utilization of trehalose. Biochemical characterization of C. japonicus GH37 activity determined that the tre37A gene product is solely responsible for cleaving trehalose and is an acidic α-α-trehalase. Bioinformatic and mutational analyses indicate that Tre37A directly cleaves trehalose to glucose in the periplasm, as C. japonicus does not possess a phosphotransferase system. This study facilitates the development of a comprehensive metabolic model for α-linked disaccharides in C. japonicus and more broadly expands our understanding of the strategies that saprophytic bacteria employ to capture diverse carbohydrates from the environment. The metabolism of trehalose is becoming increasingly important due to the inclusion of this α-diglucoside in a number of foods and its prevalence in the environment. Bacteria able to utilize trehalose in the human gut possess a competitive advantage, as do saprophytic microbes in terrestrial environments. While the biochemical mechanism of trehalose degradation is well understood, what is less clear is how bacteria acquire this metabolite from the environment. The significance of this report is that by using the model saprophyte Cellvibrio japonicus, we were able to functionally characterize the two predicted trehalase enzymes that the bacterium possesses and determined that the two enzymes are not equivalent and are not functionally redundant. Here, the results and approaches used to understand the complex physiology of α-diglucoside metabolism from this study can be applied broadly to other polysaccharide-degrading bacteria.

59 BASIC BIOLOGICAL SCIENCES↗

Physiological and genomic evidence of cysteine degradation and aerobic hydrogen sulfide production in freshwater bacteria

The sulfur-containing amino acid cysteine is abundant in the environment, including in freshwater lakes. Biological cysteine degradation can result in hydrogen sulfide (H 2 S), a toxic and ecologically relevant compound that is a central player in biogeochemical cycling in aquatic environments. Here, we investigated the ecological significance of cysteine in oxic freshwater, using isolated cultures, controlled experiments, and multiomics. We screened bacterial isolates enriched from natural lake water for their ability to produce H 2 S when provided cysteine. We identified 29 isolates (Bacteroidota, Proteobacteria, and Actinobacteria) that produced H 2 S. To understand the genomic and genetic basis for cysteine degradation and H 2 S production, we further characterized three isolates using whole-genome sequencing (using a combination of short-read and long-read sequencing) and tracked cysteine and H 2 S levels over their growth ranges: Stenotrophomonas maltophilia (Gammaproteobacteria), S. bentonitica (Gammaproteobacteria), and Chryseobacterium piscium (Bacteroidota). Cysteine decreased and H 2 S increased, and all three genomes had genes involved in cysteine degradation. Finally, to assess the presence of these organisms and genes in the environment, we surveyed a 5-year time series of metagenomic data from the same isolation source (Lake Mendota, Madison, WI, USA) and identified their presence throughout the time series. Overall, our study shows that diverse isolated bacterial strains can use cysteine and produce H 2 S under oxic conditions, and we show evidence using metagenomic data that this process may occur more broadly in natural freshwater lakes. Future considerations of sulfur cycling and biogeochemistry in oxic environments should account for H 2 S production from the degradation of organosulfur compounds.

59 BASIC BIOLOGICAL SCIENCES↗

Mitigation of PtCo/C Cathode Catalyst Degradation via Control of Relative Humidity

Maintaining the high performance of proton-exchange membrane fuel cells (PEMFC) over the course of its lifetime is a key enabling factor for its successful commercialization as a primary power source in zero-emission transportation applications. In this context, it is important to mitigate the degradation of PtCo-alloy based cathode catalysts used for oxygen reduction reaction (ORR). PtCo-alloy catalysts exhibit high activity at beginning-of-life (BOL) which tends to decrease during operation due to loss of electrochemical surface area (ECSA) and dissolution-contamination related effects of the Co-alloying component. Here, we demonstrate the use of relative humidity (RH) of the inlet gases as a controllable parameter to mitigate the degradation of PtCo-alloy catalyst degradation. We employ a catalyst-specific voltage cycling accelerated stress test (AST) durability protocol as a function of inlet RH to degrade PtCo catalysts. A series of in situ electrochemical diagnostics and ex situ characterizations have been carried out to investigate the catalyst layer characteristics at end-of-test (EOT). Our results show that at sub-saturated conditions of durability protocol operation, PtCo catalyst sustains higher EOT H 2 /air performance due to better retention of ECSA and smaller impact of Co 2+ dissolution/contamination.

25 ENERGY STORAGE↗

Physics-based Models, Machine Learning, and Experiment: Towards Understanding Complex Electrode Degradation

Degradation phenomena in Li-ion batteries are highly complex, coupled, and sensitive to use history and operating conditions. In this study, we show how tracking model parameters in continuum-level physics-based models, expedited by machine learning, can be useful in testing hypotheses for degradation mechanisms. An exemplary analysis using this approach is presented for a set of lithium trivanadate ( L i x V 3 O 8 ) cathodes cycled over a range of current rates. A simple cell revival process is combined with the parameter estimates over the course of cycling to extract valuable insights into cathode evolution and eliminate hypothesized degradation mechanisms for these cathodes. The presented approach is expected to be broadly applicable for degradation analysis of other electrodes.

25 ENERGY STORAGE↗

Membrane Degradation in PEM Fuel Cells: Part I. Modeling Gas Crossover and the Pt Band

Understanding chemical degradation of the proton-exchange membrane in fuel cells is crucial for extending their lifetimes. Herein, various degradation reactions reported in literature are organized and analyzed, including direct radical generation and an indirect (Fenton) pathway. To understand the transport of dissolved H 2 and O 2 crossover gases as they relate to membrane degradation, an agglomerate-scale model is introduced, treating gas, ionomer, and catalyst as discrete phases. The model reveals a key phenomenon: at working potentials, dissolved gases are mostly consumed at the interface between the catalyst layer and the membrane, leaving little gas to cross the membrane. Under open-circuit conditions, dissolved gases are not consumed and can then cross the membrane. This explains high H 2 O 2 concentrations and degradation rates seen in experiments but not captured in previous models. Following mixed-potential theory, crossover gases supply the hydrogen-oxidation and oxygen-reduction reactions, which occur simultaneously on individual Pt particles comprising the Pt band in the membrane, forming reactive species (H 2 O 2 , OH·). Results show crossover gas almost entirely reacts on the Pt band, allowing little to reach the opposite electrode. Furthermore, the micro-scale geometry of the catalyst-layer/membrane interface impacts the gas crossover at working potentials, indicating that cell construction affects membrane durability.

Johnson, Evan F. [Lawrence Berkeley National Labor↗

Evaluating efficacy of different UV-stabilizers/absorbers in reducing UV-degradation of lignin

Abstract Susceptibility of wood to UV degradation decreases the service life of wood products outdoors. Organic UV absorbers (UVAs) and hindered amine light stabilizers (HALSs), as well as inorganic UVAs, are added to coatings to improve the UV stability of coated-wood products. Although about 85% of UV radiation is absorbed by lignin in the wood, it is unclear which UV stabilizers can minimize lignin degradation. In this study, the photodegradation of softwood organosolv lignin was monitored over 35 days of UV exposure. Changes in lignin properties were assessed using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and phosphorus-31 nuclear magnetic resonance spectroscopy ( 31 P NMR). It was found that the aromatic rings of lignin underwent significant degradation, resulting in increased glass transition temperature and molecular weight of lignin. Subsequently, 18 different additives were mixed with lignin and exposed to UV irradiation. The analysis of samples before and after UV exposure with FTIR revealed that inorganic UVAs (cerium oxide and zinc oxide) and a mixture of organic UVAs and HALSs (T-479/T-292, T-5248, and T-5333) were the most effective additives in reducing lignin degradation. This study can help coating scientists to formulate more durable transparent exterior wood coatings.

36 MATERIALS SCIENCE↗

Plant-level performance and degradation of 31 GW DC of utility-scale PV in the United States

In this updated study, which samples 50% more capacity than the original and adds two additional years of operating history, we assess the performance of a fleet of 631 utility-scale PV plants totaling 31.0 GW DC (23.6 GW AC ) of capacity that achieved commercial operations in the United States from 2007-2018 and that have operated for at least two full calendar years. We use detailed information on individual plant characteristics, in conjunction with modeled irradiance data, to model expected or “ideal” capacity factors in each full calendar year of each plant’s operating history. A comparison of ideal versus actual first-year capacity factors finds that this fleet has modestly underperformed initial expectations (as modeled) on average, though perhaps due as much to modeling issues as to actual underperformance. We then analyze fleet-wide performance degradation in subsequent years by employing a “fixed effects” regression model to statistically isolate the impact of age on plant performance. The resulting average fleet-wide degradation rate of -1.2%/year (±0.1%) represents a slight improvement (seemingly driven by the oldest plants in our sample) over the -1.3%/year (±0.2%) found in our original study, yet is still of greater magnitude than is commonly found. We emphasize, however, that these fleet-wide estimates reflect both recoverable and unrecoverable degradation across the entire plant, and so will naturally be of greater magnitude than module- or cell-level studies, and/or studies that focus only on unrecoverable degradation. Moreover, when focusing on a sub-sample of newer and larger plants with higher DC:AC ratios—i.e., plants that more-closely resemble what is being built today—we find a more moderate sample-wide average performance decline of -0.7%/year (±0.4%), which is more in line with other estimates from the recent literature.

14 SOLAR ENERGY↗

Impacts of Guanidine Degradation Products on Next Generation Solvent (NGS) Caustic Side Solvent Extraction (CSSX) Processing

Savannah River National Laboratory researchers have been requested to perform testing to assess the potential for build-up of guanidine degradation compounds in the Next Generation Solvent Caustic Side Solvent Extraction process. Testing was also requested to determine the impact of guanidine degradation compounds [3,7-dimethyloctylamine (iDA) and Bis-N,N’-(3,7-dimethyloctyl)urea (DiDU)] on cesium behavior in the flowsheet. Twelve partitioning experiments were performed to quantify the partitioning coefficient of identified guanidine degradation compounds in various organic-aqueous mixtures. Six Extraction, Scrub, and Strip (ESS) experiments were performed to quantify the impact of degradation products on cesium behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying Optical Loss of High-Voltage Degradation Modes in PV Modules Using Spectral Analysis [Slides]

The direct current bias for photovoltaic (PV) modules interconnected in series-strings may include both high voltage negative ("HV-") and positive ("HV+") polarity with respect to the electrical ground. Multiple degradation modes, resulting in quantifiable optical loss, were found to occur during HV-/HV+ sequential stress, including: corrosion of the external glass surface, encapsulant delamination (at its interfaces with the glass and the PV cell), internal haze formation (resulting from a chemical interaction between the glass and the encapsulant), corrosion and migration of the gridlines, and corrosion of the silicon nitride (SixNy) antireflective coating on the cell. The effects of these separate modes were examined using monolithic (e.g., glass or PV cell) and laminated-coupon (glass/encapsulant/glass or glass/encapsulant/cell/encapsulant/backsheet) specimens. Characterizations during and after unbiased accelerated testing at 85 degrees C/85% relative humidity included: spectrophotometry, optical microscopy, electron microscopy, and ellipsometry. For some module components (i.e., the glass and the SixNy coating), the optical performance was determined through iterative analysis of empirical measurements. Concentrating on just their spectral effect, a novel model was then developed to estimate the transfer of light to the PV cell and the return of light from the PV module with simultaneous degradation mechanisms, which was compared to a mini-module previously subjected to HV-/HV+ stress. The model suggests one-third of the current loss observed for the mini-module can be attributed to the optical degradation of the packaging materials. The dominant degradation modes include encapsulant delamination and corrosion of the SixNy coating. Recommendations are given so that the optical model may be improved relative to accelerated testing and validated relative to field aging.

14 SOLAR ENERGY↗

Green Biodegradation: Analysis of Potential Polyurethane-degrading Enzymes and Their Secretion in Chlamydomonas reinhardtii

Plastic pollution is a critical global issue, with only 5% of plastics currently recycled. Polyester polyurethane (PU), a widely used plastic, can potentially be broken down using enzymatic biodegradation rather than mechanical processing that generates microplastics. This study focuses on PS5, a potential PU-degrading enzyme with esterase activity, capable of cleaving ester bonds found in PU structures. Researchers investigated the expression and secretion of PS5 in the green microalga Chlamydomonas reinhardtii, a sustainable production platform capable of generating PU precursors such as lipids and diacids while sequestering carbon. Experiments demonstrated that PS5 significantly outperformed commercial lipase in cleaving the FDA substrate, indicating high esterase activity. Algal transformants expressing PS5 also showed halo formation on Impranil®-agar plates, suggesting PU dispersion degradation. These findings highlight C. reinhardtii as a viable chassis for the production and secretion of plastic-degrading enzymes, offering a sustainable route to both upcycle and degrade PU products at the end of their lifecycle.

Diaz, Crisandra Jade↗